Want my layer background color to be white

Was following along in "iceflowstudios.com" making stars and planets, or at least trying to learn how to, and at the very beginning he makes a layer and its white and my brush panel shows gray! my left side color panels show black and white and I have the white one on top and the preview panel in my brush window is gray. Oh my stars! Why isn't my brush preview panel white!? I don't know how to take a screen shot or I would do that here, now. thanks!

Why do you use a dark Color Theme (Photoshop > Preferences > Interface)?
For non-video work that would seem to be a poor choice.
is there a short cut for screenshots on a mac?
cm-shift-3 for the whole screen and cmd-shift-4 for a section

Similar Messages

I want a background color other than white in my Calendar app, Mavericks

I want to have a choice in background color other than white for my Calendar app on Mavericks is this possible

I have been playing around and by recalibratin Display colors I have gotten the weekend to show up better in a different color which is a big help

Layer Background color not support on AP Element

Hi I am new to dreamweaver. I just started learning how to
use it, and I can't figure out why when I am validating the
browser, I kept on getting a message that the layer background
color is not supported in the AP element. I looked at my code and
it seems fine. All I did was just insert the AP layer and I change
the background color. Is there something I am doing wrong?

Thank you. That's telling you that layer-background-color is
NOT supported
in those browsers (in fact, it's invalid HTML, being
supported only in IE5
and earlier). You should use CSS to specify colors, not the
Property
inspector, and you will avoid such traps. In fact, in CS3,
when you use the
Property inspector, the proper CSS is written in the
stylesheet for you.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"moonstar2005" <[email protected]> wrote in
message
news:ff315r$rvv$[email protected]..
> HI Murray,
>
> My code in the AP element:
>
> Layer-background-color: #ccccc
>
> The message I got when I compare the browser
compatibility is:
>
> "Unsupported property: layer-background-color
>
> Affects: firefox 1.5; internet explore 6.0, 7.0;
internet explore for mac
> 5.2,
> netscape 8.0; opera 8.0, 9.0 safari 2.0 "
>
>

Background color changed from white to yellow and =25% changed to %% on email

I type =25% on my email and sent out, background color changed from white to yellow and =25% changed to %%.

Try leaving a space after the =
Thus: = 25%
Where and when did it change? Did it change inside Thunderbird? Did it change in the Sent folder? Or in a reply to you?
= and % are used in certain types of email encoding; =20% often appears, meaning character 0x20 which is 32 denary or the space character. It is often used where an explicit space would be illegal, and this is common in URLs and other links. I'm thinking that =25% similarly has a special meaning. It ''shouldn't'' get decoded, but software is buggy.
I can't reproduce it here, which is why I'm asking about how and when it changes. Where does the Microsoft software come into it?

[svn:fx-trunk] 5313: Application, WindowedApplication, and Window background color changed to white.

Revision: 5313
Author: [email protected]
Date: 2009-03-13 19:10:24 -0700 (Fri, 13 Mar 2009)
Log Message:
Application, WindowedApplication, and Window background color changed to white.
QE Notes: None
Doc Notes: None
Bugs: sdk-16721
Reviewer: Ryan
tests: checkintests, cyclone build tested
Ticket Links:
http://bugs.adobe.com/jira/browse/sdk-16721
Modified Paths:
flex/sdk/trunk/frameworks/projects/airframework/defaults.css
flex/sdk/trunk/frameworks/projects/framework/defaults.css
flex/sdk/trunk/frameworks/tests/checkinapp/checkinapp.css

Hi,
When system is in a sleep mode or hibernate mode, it will save the data ans settings in memory or hard disk, so I suggest you run a memory check and a harddisk check and see if it can detect any errors.
Memory check (instruction is similiar to windows 8\8.1, type "memory" in the search charm bar)
http://windows.microsoft.com/en-in/windows7/diagnosing-memory-problems-on-your-computer
Hard disk check
http://technet.microsoft.com/en-us/magazine/ee872425.aspx
Meanwhile, please check event viewer to find more information, useful path: event viewer\Windows logs or event viewer\Applications and Services Logs\Kernel-power
Yolanda Zhu
TechNet Community Support

How can I put a div at the TOP of the page with a background color? No white space

I am attempting to put an orange bar at the very top of a page and one that also stretches across the entire width of the page, no matter the page size.
With the code below the orange bar appears but there is white space between the top of the browser and the orange bar.
<div style="background-color:#f79321;height:30;width:auto;"> <p> </p></div>
How can I get rid of this white space? I tried setting margin and padding to 0px but that did not work.

I'm still getting the spacing:
<html>
    <head>
        <style>
            body
            margin: 0;
            padding: 0;
            font-family: Georgia, serif;
            text-align: left;
            font-size: 16px;
            line-height: 1.2;
            word-wrap: break-word;
            text-rendering: optimizeLegibility;/* kerning, pri*/
            h2
            font-family:Arial, sans- serif;
            font-size: 28px;
            color: #fb8700;
            h2 a
            font-family: "bebas-neue",sans-serif;
            font-size: 40px;
            h2 a:visited
            color:#fbb100;/* visited - orange*/
            text-decoration:none;
            h2 a:active
            color:#fbb100;/* selected- orange*/
            text-decoration:none;
            h2 a:hover
            color:#c9c9c9;/* mouseover- light grey*/
            text-decoration:none;
            h4
            font-family: "bebas-neue",sans-serif;
            font-size: 50px;
            color: #fbb100;
            #page-wrap
            width: 960px;
            margin: 0 auto;
            p.topFormat
            font-family: Georgia, serif;
            font-size:16px;
            text-align:center;
            p.footerFormat
            font-family: Georgia, serif;
            font-size:16px;
            text-align:left;
            line-height: 150%;
            a:link {color:#fbb100;text-decoration:none;}      /* unvisited - orange*/
            a:visited {color:#fbb100;text-decoration:none;} /* visited - orange*/
            a:active {color:#fbb100;text-decoration:none;} /* selected - orange*/
            a:hover {color:#636363;} /* mouse over - grey*/
        </style>
        <script type="text/javascript" src="//use.typekit.net/ppq8ria.js"></script>
        <script type="text/javascript">try{Typekit.load();}catch(e){}</script>
    </head>
    <body>
        <div style="background-color: #f79321; height: 31px; width: auto;">
        <p> </p>
        </div>
        <div>

My screen background color is off-white & this color comes through on the print page. Page Setup/Print Background is set off. How do I fix this? Problem first popped up with version 6, still there with version 8.0.1

File/Page Setup/Format & Options/Options/Print Background (colors & images): Check box set off.
This setting does not work as my screen background color still comes through on the print preview & the print page.
Is this because the newer Firefox versions have blocked my graphics driver version?

See [https://bugzilla.mozilla.org/show_bug.cgi?id=683139 Bug 683139] – Using the 'High Contrast Black' 'Accessibility Option' in Win XP results in the screen colours being printed.
<i>(please do not comment in bug reports)</i>

Application Background Color changes to white

The application background (the color that appears behind the image) should be set to grey, black or a custom color. No matter what is chosen, it is white when changing between images. I have to click on the background space to get it to change back to my selected color. If I again switch pictures, it is white again.
Does anyone know a fix for this issue?
I am running CS5 in Windows 8. It was not an issue on my Windows 7 PC.

Could you please post a screenshot with the Layers Panel visible and mark what area you mean?

Photoshop 7 background default color is not white

Does anyone know how to change the defaulf background color back to white ... all files open with a yellow background, the default icon on the tool bar is yellow also. I click on restore default background color and it stays yellow even on a grayscale file ...I had this problem about 6 years ago and dont remember which of the 2,175 easy fixs it was.

You need to calibrate your monitor.
Since you have PS 7, you can use Adobe Gamma from the control panel.
This is a fairly basic tool that relies on the user's eyeball – a better solution is a hardware calibrator like the EyeOne.
http://www.northlight-images.co.uk/article_pages/eye_one_display_2.html

Background Color When Adding Frames - PSE8 or PSE9

When adding a frame to an image, the background color that is outside of the new frame, and which borders it, always comes up white for me. Can that area be made to come up another color, and if so, how? Thanks!

Hi, I understand that, but what I really want to do, and perhaps I didn't express myself clearly, is select a background color other than white and have it come up as the default color until such time as it's changed. Thanks!
Date: Thu, 10 Mar 2011 06:43:04 -0700
From: [email protected]
To: [email protected]
Subject: Background Color When Adding Frames - PSE8 or PSE9
For the background, you can either choose any background from the content panel or
choose any color from the color palette
select Paint bucket tool
Click on a New layer icon in the layer's panel with Control/Command pressed.
Click on the white area around the frame.
the area is filled with the color selected.
>

Change background color for JFrame

hi,
i want to change background color of JFrame. In my application i didn't create any panels.
my code like this,
Frame myFrame = new JFrame ( " Grid Layout Frame ");
myFrame.setSize(500,500);
myFrame.getContentPane().setBackground(Color.white);
myFrame.setVisible(true);thanks,
Balaji

You don't get a white frame when you run this program?import java.awt.*;
import javax.swing.*;
public class junk
     public static void main(String[] args) throws Exception
          JFrame f = new JFrame("Hello");
          f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          f.setSize(500,500);
          f.getContentPane().setBackground(Color.white);
          f.setVisible(true);
}

Background -color of a template page through skinning

Hi All,
I designed a Template page using webcenter portal application .In that I added some Images .
Now I want to get good look and feel for that template using skinning .By default in the application we have portal-skin.css.
So I want to apply background -color to that template page.But the color should be shaded with more than one color.So how can I
get it through skinning.Could anyone help me on this.
Thanks
keerthi

Hi Jiri,
Thanks for your quick reply .
I have seen the link which you gave .But they had mentioned like this to apply for background.
background: -webkit-linear-gradient(left, grey, grey 30%, white 30%, white);
But in my skin.css file i have not found this property -webkit-linear-gradient.
And another syntax is of like this:
div#content {background: url("./gray.png") repeat-y, white; background-size: 30%;}
Here there are uploading color as a image .But actually i am not following this way .
Could we have any other approach for this.
Thanks
keerthi.

Problem in setting the background color of jtable with Nimbus

Hi
I have created a java swing application. In which I am using JTable.
When creating a simple JTable and displaying with Nimbus, the row background color alternates between white and a light blue-grey.
I want the table with single colour. Only the first column should be grey colour and other should be white.
I used this code to set the background and foreground colour.
public Component prepareRenderer
    (TableCellRenderer renderer, int index_row, int index_col){
            Component objComponent = super.prepareRenderer(renderer, index_row, index_col);
            Color objGreyColour = new Color(240,240,240);
            Color objWhiteColour = new Color(255,255,255);
            if(index_col == 0){
                objComponent.setBackground(objGreyColour);
                objComponent.setFont(new java.awt.Font(CommonClass.getFontName(),java.awt.Font.BOLD, CommonClass.getFontSize()));
                objComponent.setForeground(Color.BLACK);
            }else{
                setSelectionBackground(Color.BLUE);
                objComponent.setBackground(objWhiteColour);
                objComponent.setForeground(Color.BLACK);
            return objComponent;
        } Look wise it is fine but when i try to select the cell it is not highlighting the cell and also i m not able to select multiple cell with ctrl key.
Any help would be appreciated
Thanks
Sonal

Hello,
1) if you want better help soone,r please post an SSCCE (http://sscce.org) instead of a code extract.
2) selection highlighting is lost because your code... doesn't handle selection. To take selection into account, you can use <tt>if (super.isRowselected(index_row)) {...}</TT>.
Regards,
J.

Keyboard shortcut for filling layer with color are opposite on my PS CS6 OSX install, Help?

Hello all,
I'm a bit of a noob, and following a tutorial….and found something strange and wonder if you might help me figure what's happening.
I have Photoshop Extended CS6 on a macbook pro (late 2011).
I'm running OSX v 10.7.5
I'm following along and the instructor added a new layer. I did this.
He then filled the layer with white which is his background color (he has black foreground, white background). I have the same fore/background colors.
Now, I thought on mac that to fill with foreground color you hit Apple+Delete and to fill with background you hit Option+Delete
It is doing the exact OPPOSITE for me. I hit Apple+Delete (or even backspace) and it fills with my background color which is white
If I hit Option+Delete (or backspace) it fills with my foreground color.
I've tried looking in the Edit Keyboard shortcuts area…but I don't see these settings anywhere.
I do have an external keyboard hooked to my mac. It is a 3rd party one, but seems to work in ever other way normally.
Keyboard here is: http://pckeyboard.com/page/UKBD/UB40P4A
Any suggestions why my keyboard shortcut for filling a layer with color might be reversed?
Thanks in advance,
CC

eartho wrote:
option-delete is, and always has been, fill with foreground.
a 1 second google search would have informed you of this.
Thanks for the reply.
I did do a Google and I got this:
http://blog.coghillcartooning.com/84/tip-keyboard-shortcut-to-fill-a-photoshop-layer-or-se lection-with-the-background-or-foreground-color/
And from that I got the option-delete was background, and apple-delete was foreground.
Hence my confusion...
Thanks for the reply, I guess I should check 2-3 sites each time I google for keyboard shortcuts for PS.
CC

Background-color ADF

Hi , good time
(Jdev 11.1.1.7)
i want to set background color for each colomn that has a special condition in adf:table .
I use a function to return a string and assign it to its style
inlineStyle="#{testBean.backGroundColor1}">
testBean is request scope ..
now
i dont see any chane ion the page !!!!!!
when i set background-color ,,, i see changes . but it is not all that i expect . == >
                  inlineStyle="background-color:Fuchsia;" this code sets background color of column to Fuchsia but background of inputbox still is white
How can i set background of an af:column programmatic?               .

The inputText field is not the column, if you set the background-color on a column, it will not color it's children. You have to style the components you want styling applied to. If you have a column with an input text, and you want both to be styled, you have to style both. Background-color is not inherited. I reread your second message, and it seems like you should NOT style the column, only the contents of that column.
I would normally do something like this, using the row to determine the value. Your backing bean probably doesn't know what row is being iterated.
{sorry for hand-jammed coding errors}
<af:column>
     <af:inputText inlineStyle="background-color:#{row.attribute.value gt 0? none : red}"/>
</af:column>

Want my layer background color to be white

Similar Messages

Maybe you are looking for