Want o add button to application toolbar of CO12
Hi,
I want to add one button to application tool bar of CO12 transaction.
Let me know the procedure to achieve the same
Thanks in advance,
Nag
Hi,
Any alternative would also do.
Please help
Thanks,
Nag
Similar Messages
-
How to Add button in Application Toolbar for Fb01(screen) Transaction
Hi All,
I need to Add a customized Button at Application toolbar for FB01 Tcode for standard screen.
I am unaware of this,please take it as an urgent issue and help me with your inputs.
Points will be given.
Thanks,
RameshOn which screen (in which standard status ?) to do what ?
You could try to bypass sscr key requirement using some BAdI like FI_HEADER_SUB_1300 to add a button to screen or identifying an implicit enhancement option in one PBO module/form to change PF-STATUS, then look for such an option in PAI module/forms.
Regards,
Raymond -
How to add a custom button on Application Toolbar for ME21N, ME22N & ME23N
Hi Experts,
I am new to this forum. I hope someone will help me.
My Requirement is as :
I want to add a new custom button on Application Toolbar for ME21N, ME22N & ME23N.
There are already standard buttons in this toolbar which is Document Overview On, Hold, Personal Settings etc.
So after the 'personal settings' button i want add a new button and want to write a code which will open one custom screen.
I am not able to find any exit for this....
Please help...
Thanks....Hey Buddies
Try below BADI : ME_PROCESS_PO_CUST
and check with required methods.
1)PROCESS_ITEM
2)CHECK
3)POST
Regards,
Pranav -
How to add button on application tool bar of standard transaction-URGENT
Hi All,
Can any one let me know how to ADD the button in on application tool bar of standard transaction by using SHD0 transaction or any other solution.While adding the button I don't want do any code modification.
Thanks,
VijayHi,
Go through this thread.
Push Buttons on application toolbar.
Regards,
Vani. -
Adding Button on application toolbar on ABAP List display screen....
Hello Gurus,
I copied SAP program 'RFBUEB00' into custom program. When I execute the custom report, I see the data lijne by line in ABAP list. I see a deafult 'Select' button on application toolbar.
If I want to add additional custom button on application toolbar on ABAP list display screen, how can I do it ? Please help.
Regards,
Jainam.
Edited by: Jainam Shah on Oct 27, 2009 5:44 PM>
Jainam Shah wrote:
> In my case it just rights the data in ABAP screen as follows. I can't use ALV grid and stuff because its on older version.
>
>
FORM LISTE_SCHREIBEN.
>
> check = '@T9@'.
>
> FORMAT COLOR COL_KEY INTENSIFIED OFF.
> WRITE: / SY-VLINE,
> check,
> BKPF-BUKRS,
> BKPF-BELNR,
> BKPF-GJAHR.
> FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
> WRITE: BKPF-BLART,
> (8) BKPF-BLDAT DD/MM/YY,
> (8) BKPF-BUDAT DD/MM/YY,
> BKPF-WAERS,
> BKPF-XBLNR,
> 80 SY-VLINE.
> XAUSGABE = 'X'.
> HIDE: BKPF-BUKRS, BKPF-BELNR, BKPF-GJAHR, BKPF-BSTAT, XAUSGABE.
> IF BKPF-BKTXT NE SPACE.
> FORMAT COLOR COL_KEY INTENSIFIED OFF.
> WRITE: / SY-VLINE, CHAR4 UNDER BKPF-GJAHR.
> FORMAT COLOR COL_NORMAL INTENSIFIED.
> WRITE: BKPF-BKTXT UNDER BKPF-BLART,
> 80 SY-VLINE.
> HIDE: BKPF-BUKRS, BKPF-BELNR, BKPF-GJAHR, BKPF-BSTAT, XAUSGABE.
> ENDIF.
> ENDFORM.
>
>
> I have to select multiple lines and proces them. For one line I know I can use AT-LINE-SELECTION but this is multiple lines...
What is your SAP system version?
It seems to be displayed only in ALV. Well, if you can make it to display in LIST ... you can go with set pf-status.
good luck -
How to add buttons in Main toolbar in SAP EHSM?
Hi All,
We have a requirement where we need to add button to main toolbar in incident creation in SAP EHSM.
Comp. Configuaration : EHHSS_INC_REC_OIF_V3
In the above picture, we want to add custom button "Submit". But when i add new button in comp. configuartaion, my application stops responding and i get time out error.
Please suggest,how to move forward.
Thanks,
VimalHi Vimal,
If we have to add a new button to a toolbar, please right click on the toolbar and get the technical details like the component name, application name , etc. & and based on the information goto the required configuration in the workbench and add the button at component level or at FPM config.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0a2b7c2-1598-2e10-45bc-c556df3b9576?QuickLink=index&…
Above link is guide to help you for the same,
Regards,
Harsha -
Button at application Toolbar in Output
Hi friends,
In my classical report output,i want to add one button in application toolbar.so i have applied PF -STATUS for this. But when i am doing so..my standard buttons like back,cancel and save are automatically disabled..I dont want to write explicit code for back,save and cancel.. i want this button to work in addition to standard functionality..please guide me how to get this one..and also tell me to where write SET PF-STATUS 'STATUSNAME' in code..after which event..Also i have copied standard PF Status for it but it is not working
Thanks,
Gaurav
Edited by: Gaurav Kumar on May 25, 2009 3:11 PM
Edited by: Gaurav Kumar on May 25, 2009 3:12 PMHi Gaurav,
I have worked on same application but for ALV. Hcave look on following code it might help you.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK =
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = v_repid
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
it_fieldcat = fcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = itab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form set_pf_status
Set PF-STATUS for user's push button
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZNEWSTATUS'.
ENDFORM. " PF_STATUS_NEW
*& Form user_command
Click on button gives popup information
FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
lv_ucomm
= sy-ucomm.
CASE lv_ucomm.
WHEN 'BUTTON'.
MESSAGE 'Working well' TYPE 'I'.
ENDCASE.
ENDFORM. "user_command
Hope it will resolve your prblm
Thanks
Lokesh.
Edited by: Lokesh Tarey on May 25, 2009 12:13 PM -
How to deactive a button in application toolbar
how to deactive a button in application toolbar?
Simple example
This example shows how to create a toolbar with a single Exit button, used to exit the program.
Steps:
Create a screen and add a custom container named TOOLBAR_CONTAINER
Code:
REPORT sapmz_hf_toolbar .
TYPE-POOLS: icon.
CLASS cls_event_handler DEFINITION DEFERRED.
G L O B A L D A T A
DATA:
ok_code LIKE sy-ucomm,
Reference for conatiner
go_toolbar_container TYPE REF TO cl_gui_custom_container,
Reference for SAP Toolbar
go_toolbar TYPE REF TO cl_gui_toolbar,
Event handler
go_event_handler TYPE REF TO cls_event_handler.
G L O B A L T A B L E S
DATA:
Table for registration of events. Note that a TYPE REF
to cls_event_handler must be created before you can
reference types cntl_simple_events and cntl_simple_event.
gi_events TYPE cntl_simple_events,
Workspace for table gi_events
g_event TYPE cntl_simple_event.
CLASS cls_event_handler DEFINITION
CLASS cls_event_handler DEFINITION.
PUBLIC SECTION.
METHODS:
on_function_selected
FOR EVENT function_selected OF cl_gui_toolbar
IMPORTING fcode,
on_dropdown_clicked
FOR EVENT dropdown_clicked OF cl_gui_toolbar
IMPORTING fcode posx posy.
ENDCLASS.
CLASS cls_event_handler IMPLEMENTATION
CLASS cls_event_handler IMPLEMENTATION.
METHOD on_function_selected.
CASE fcode.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMETHOD.
METHOD on_dropdown_clicked.
Not implented yet
ENDMETHOD.
ENDCLASS.
START-OF-SELECTION.
SET SCREEN '100'.
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
IF go_toolbar_container IS INITIAL.
Create container
CREATE OBJECT go_toolbar_container
EXPORTING
container_name = 'TOOLBAR_CONTAINER'.
Create toolbar
CREATE OBJECT go_toolbar
EXPORTING
parent = go_toolbar_container.
Add a button
CALL METHOD go_toolbar->add_button
EXPORTING fcode = 'EXIT' "Function Code
icon = icon_system_end "ICON name
is_disabled = ' ' "Disabled = X
butn_type = cntb_btype_button "Type of button
text = 'Exit' "Text on button
quickinfo = 'Exit program' "Quick info
is_checked = ' '. "Button selected
Create event table. The event ID must be found in the
documentation of the specific control
CLEAR g_event.
REFRESH gi_events.
g_event-eventid = go_toolbar->m_id_function_selected.
g_event-appl_event = 'X'. "This is an application event
APPEND g_event TO gi_events.
g_event-eventid = go_toolbar->m_id_dropdown_clicked.
g_event-appl_event = 'X'.
APPEND g_event TO gi_events.
Use the events table to register events for the control
CALL METHOD go_toolbar->set_registered_events
EXPORTING
events = gi_events.
Create event handlers
CREATE OBJECT go_event_handler.
SET HANDLER go_event_handler->on_function_selected
FOR go_toolbar.
SET HANDLER go_event_handler->on_dropdown_clicked
FOR go_toolbar.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
http://www.erpgenie.com/abap/controls/toolbar.htm#Simple%20example
http://help.sap.com/saphelp_nw04/helpdata/EN/42/d2ab343e416635e10000000a1553f6/content.htm
help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCITOOLBAR/BCCITOOLBAR.pdf
Regards,
Jagadish -
Making buttons in application toolbar dynamic....
Hello,
I have a application tool bar with 8 icon buttons defined. Now I have a custom configuration table where I check what buttons in application toolbar should be seen so that user can select which button he wants to see and which not anytime he wishes.
My question is how can I make buttons in application toolbar dynamic ?
Please guide.
Regards,
Rajesh.This is sample logic, but you can adapt it to you needs
DATA: excl_tab TYPE sy-ucomm OCCURS 0 WITH HEADER LINE.
AUTHORITY-CHECK OBJECT 'ZREO' ID 'ACTVT' FIELD c_print.
IF sy-subrc NE 0.
APPEND 'PRIN' TO excl_tab.
ENDIF.
IF ok_0010 = 'DISP' OR ok_0010 = 'DELE'.
APPEND 'SAVE' TO excl_tab.
ENDIF.
IF ok_0010 <> 'DELE'.
APPEND 'DELE' TO excl_tab.
ENDIF.
SET PF-STATUS 'STAT_100' EXCLUDING excl_tab. -
How to disable the button in application toolbar in report pgm
Can anyone help with How to disable the button in application toolbar in report pgm
Hi,
You can use it_excluding to disable button on the tool bar.You have to find the function code for the required button and append that function code to the it_excluding .The optional IMPORTING parameter IT_EXCLUDING is an internal table. It is only needed if the caller uses the list tool standard interface but wants to deactivate interface functions which he or she does not need.You can have your defined pf-status using I_CALLBACK_PF_STATUS_SET.
SAMPLE PROGRAM
tables spfli.
type-pools: slis.
DATA W_FCODE TYPE SLIS_EXTAB-FCODE.
data: t_spfli TYPE SPFLI OCCURS 0 WITH HEADER LINE.
select * from spfli into table t_spfli.
data : t_excluding TYPE SLIS_T_EXTAB .
W_fcode = '&OUP'.
append w_fcode to t_excluding.
W_fcode = '&ODN'.
append w_fcode to t_excluding.
call function 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_STRUCTURE_NAME = 'SPFLI'
IS_LAYOUT =
IT_FIELDCAT =
IT_EXCLUDING = T_EXCLUDING
tables
t_outtab = T_SPFLI
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
http://help.sap.com/saphelp_nw2004s/helpdata/en/99/49b844d61911d2b469006094192fe3/frameset.htm
Regards,
Priyanka. -
How do I add buttons to the toolbar in Reader?
En Adobe Reader, ¿Como puedo agregar botones a la barra de herramientas? Ya que pierdo mucho tiempo utilizando el botón derecho del mause y buscar los botones en las ventanas emergentes.
Muchas graciasHi richarddaniel1111,
To add buttons to the toolbar, do this:
Choose View > Show/Hide > Toolbar items.
Choose an option from the submenu (File, Edit, Comment, and so on).
Choose the tool that you want to add to the toolbar.
Hope that helps!
Best,
Sara -
How to make buttons in application toolbar enable and disable
Hi ,
I have to shaow the buttons in application toolbar enable or disable dynamically , pls helpCheck syntax of SET PF-STATUS status EXCLUDING fcode in online help...
Regards,
Raymond -
Adding a button in Application toolbar of Transaction IW32
Hi ,
I need to add a button in the Application Toolbar of standard transaction IW32,I tried copying the pf-status and adding it in the user exit exit_saplocih_006 also,but its not working.
Please Kindly help.
Regards,
Ismail.I think you must create a copy of IW32 ( I am not wrong in SAP lingo they say repair) for example ZIW32. And add a button relevant gui status. (I have been looking Gui status of IW32 it is have more status. you must find true status)
If you want change original source don't forget this a patch can change your code. -
How to Deactivate the Button in Application Toolbar
Dear ABAPers,
I would like to deactivate the Release button in CO01 Transaction.How to do this.Please Help me to solve this problem.
Thanks & Regards,
Ashok.Hi,
You can do it 2 ways,
One is
Code a Function code for the button in the Application toolbar that you want to disable.
For example, I am trying to disable the SAVE button on the Application toolbar. The Function Code that I have coded is 'SAVE'.
module STATUS_0100 output.
APPEND 'SAVE' TO T_PFSTATUS.
SET PF-STATUS 'STATUS' EXCLUDING T_PFSTATUS.
endmodule. " STATUS_0100 OUTPUT
The second way is to create a transaction variant using SHD0
Give the Transaction code(ZTRAN) for which you want to create a variant -> name of some variant (ZVAR) -> create -> takes you to your transaction -> enter -> Menu Functions -> Double click on the button that you want to deactivate -> it turns yellow -> Click on Exit and Save -> Save and go back -> You can see a screen variant created (ZVAR_0100)
Now Goto -> Create variant transaction -> Give your transaction variant name (ZVAR) -> Select Transaction with variant -> Takes you to SE93 transaction -> The transaction variant name appears -> save
Now your new transaction is ZVAR -> Execute it and you will find the button deactivated
Check this for verifications
[http://help.sap.com/saphelp_nw70/helpdata/EN/43/132f9803d76f40e10000000a422035/content.htm] -
Create button to application toolbar in report
Hi,
May i know how to create new button name continue near the save button or print button at the application toolbar?
Any suggestion ???HI,
For creating a new button, write the name of the button on the tool bar for ex. &CONTI.
Double click on it, and choose the icon and function text ofr it.
Save and activate the menu.
Your button gets created in the menu.
Declare the variable in your program with the code for continue.
Here's an example,
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'ALV_MENU'.
endform.
form user_command using p_ucomm type sy-ucomm
data : vbeln type vbeln_va.
case p_ucomm.
when '&CONTI'.
ENDCASE.
Regards,
Pritha.
Reward if helpful.
Maybe you are looking for
-
Iphone is no longer detected on itunes/computer it is synched with.
One of my Iphones is no longer detected by the itunes/computer that it is synched with. The computer/itunes does detect other devices. The iphone in question is able to be detected on another computer/itunes. I updated software oof iphone on anothe
-
Hi all, I am testing the expdp on attach job in 10.2R3 1. expdp job and ^C to stop it C:\TEMP>expdp system/oracle directory=testdir dumpfile=test5.dmp logfile=test5.log full=y job_name=expjob . . exported "SCOTT"."DEPT" 5.656 KB 4 rows . . exported "
-
G5 restarts everynight at the same time
Dual 2 ghz PowerPC G5 1.5 gb ram. 10.4.11 My work computer is a hand me down from another dept. IT does not support it due to its "age" so I cant ask them for help. Since I have had it it will restart every night. And I am over it! In the System Pr
-
We are trying to delete picture but it leaves a gap. How do you get rid of gap?
How do you get rid of gap after deleting picture
-
CProjects 4.0 - Project ID Generation
Hi All, The number ranges could be used in cprojects 3.1 to automate the project/ object ids using IF_EX_DPR_ATTRIBUTES~SET_DEFAULTS_UPON_CREATION. Does anyone know how the project id can be generated using number ranges in 4.0 ? Also, how this field