Want to add an image but with actionscript not a s:Image

hi. i've looked for a good answer but can't seem to find one...i have a few images i want to add to my app at run time and don't want to use a whole lot of <mx:Image> components...just want to do it with actionscript. i get to the point where i've got an Image object and embedded the source of the Image object but don't know how to add the Image to the display list? thx

on the same issue...i'd like to use some of the functions of the Sprite class....so i've got my image and added that to a Sprite object but can't seem to add the Sprite to any of the spark/mx containers...keep getting this error:
Main Thread (Suspended: Error: addChild() is not available in this class. Instead, use addElement() or modify the skin, if you have one.)
spark.components.supportClasses::SkinnableComponent/addChild
play/init
play___play_Application1_creationComplete
flash.events::EventDispatcher/dispatchEventFunction [no source]
flash.events::EventDispatcher/dispatchEvent [no source]
mx.core::UIComponent/dispatchEvent
mx.core::UIComponent/set initialized
mx.managers::LayoutManager/doPhasedInstantiation
mx.managers::LayoutManager/doPhasedInstantiationCallback

Similar Messages

When I connect my iPod to my computer the AutoPlay window opens up and it doesn't give me the option of choosing iTunes. I want to add more music but all it gives me the option to do it put pictures my computer.

Hi, for some reason I can't add more music to my iPod and it doesn't give me the choice of choosing iTunes to show my iPod. I want to add more music but all it gives me the option to do it put pictures my computer. I really need help and I have no clue what to do. Please help me

Try using RecBoot to kick it out of recovery mode. If that does not work, try a manual install, as outlined in link below. If it STILL keeps entering recovery mode, you most likely need a new logic board.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Want to add multiple idoc type with single message type.

Hi Gurus,
I have a problem. I want to add multiple idoc type with single message type in WE20.
How we can do this in WE20 or is there any other way to do that?
Please help me.
Thanks in advance.
Srimanta.

hi,
basically in partner profile i.e. in we20 , we add details to the receiver / sender port that we have created using we21.
so what exactly we do in that is that we first use the message type for those idocs that we have created.
now based on those message type we create a process code. now this is the reason why you cannot apply several message types with the same name in we20... as process code is unque for each message type.
so thats why you can only assign the same message name to several idocs in we82 and then in we20 define the process code for that message type.
it will solve your problem.
hope this will help you!!!
Thanks & regards,
punit raval.

In numbers '09, I have 24 numbers and want to add 89 to each, with 24 distinct results. How?

In numbers '09, I have a column of 24 numbers and want to add 89 to each, with 24 separate results in a new column. How?

HI t,
Assuming the numbers are in column A, starting at A2, and that you want the results in column B, and in the same row as the original numbers:
B2: =A2+89
Fill down for 24 rows to B25.
To fill down:
After entering and confirming the formula in B2,
Select cell B2.
Shift-click on cell B25 to add it and all cels between it and B2 to the selection.
Go Insert (menu) > Fill > Fill Down.
Done.
Regards,
Barry

Hey! I recently had to reboot my computer and reinstall itunes. I now want to update my iPad but it is not allowing me to save my apps in my itunes library because it is already connected with my old library from before I rebooted. What do I do?

Hey! I recently had to reboot my computer and reinstall itunes. I now want to update my iPad but it is not allowing me to save my apps in my itunes library because it is already connected with my old library from before I rebooted. What do i do?!

The solution is fairly easy IF the items that you are concerned about are all items that have been obtained from the iTunes Store AND they were all purchased using the same Apple ID. First, with the iPad disconnected from the computer, fire up iTunes. Look to the right side top and confirm that that Apple ID is displayed. If it is not, go to "Account" and log into that ID. Then, connect the iPad. Say "yes" to the "Transfer Purchases" choice. Everything on the iPad will be transferred to the computer's iTunes library.
If anything goes wrong, you can download all purchased items again with no charge (except movies) provided that you use the same Apple ID.
If you have been using multiple Apple IDs, it's a bit more complicated. Post back and we'll go from there.

I want to add an image to a video

So i'm making a trailer and i want an image to appear while the video is playing.
like when you add a text to the video, well i want to add an image.
i've been surfing and surfing and haven't found anything.
PLEASE HELP!

Use the cutaway feature to cover the full screen. Otherwise use picture in picture.

If I want to add a family member who is not in my household and has their own itunes account and credit info...

If I want to add a family member who is not in my household and has their own itunes account and credit info...will all their purchases be charged to my credit card as the Organizer?

Hi mbostick,
Welcome to the Apple Support Communities!
The only way a family member can use their own funds and not the Organizer’s account for purchases would be with store credit, such as an iTunes gift card.
Family purchases and payments
Making purchases
After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer. As the family organizer, any receipts generated by the transaction will be sent to you. Learn more about how iTunes Store purchases are billed.
Have a great day,
Joe

It is saying my voicemail is full and it isn't. I do not want to erase my messages, but I do not know how to fix this problem. Can someone help me?

It is saying my voicemail is full and it isn't. I do not want to erase my messages, but I do not know how to fix this problem. Can someone help me?

heymare66 wrote:
The phone usually can hold 24 messages before the voicemail is full, but now I have only 21 and it's saying it's full.
I think your Voice mailbox goes by time, not # messages, so if one or two of the messages is longer, then it would be "full" faster.
Go to youmail.com and follow the directions to set up youmail.
Just curious - why do you need to save 20+ messages? Once I deal with them, I delete them.... and I rarely have more than one or two \saved messages....

Re: I want to buy the app, but I can not because I forgot the security issues

Re: I want to buy the app, but I can not because I forgot the security issues

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page should let you reset them : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

Hi, I have a MAC (version 10.10.2) and installed Creative Suite one year ago. Now I want to open the Illustrator, but it does not work. It says I should install old Java SE 6-Runtime-Version to open „Adobe Illustrator CS6". Where can I find it? Thanks for

Hi, I have a MAC (version 10.10.2) and installed Creative Suite one year ago. Now I want to open the Illustrator, but it does not work. It says I should install old Java SE 6-Runtime-Version to open „Adobe Illustrator CS6“. Where can I find it? Thanks for your answer! Jana

Prompted to install Java SE 6 Runtime | Mac OS 10.9
Mylenium

Hello i bought my first mac and i want to become an iOS developer and creat app for iPhone iPad but now i have only iPad 4 and i want to buy iPhone 5s but I'm not sure to buy iphone5s now or wait for iPhone 6 because iphone6 may have bigger screen if i b

hello
i bought my first mac and i want to become an iOS developer and creat app for iPhone iPad but now i have only iPad 4 and i want to buy iPhone 5s but I'm not sure to buy iphone5s now or wait for iPhone 6 because iphone6 may have bigger screen if i buy iphone5s now can i creat app for iPhone 6 if it has bigger display without buying it just test it on iPhone 5s
thanks

One of my favorite things about developing for iOS using Xcode is the Simulator. It runs any of the iOS devices simulated right on your Mac. If you don't have a hardware device to test your application on, the Xcode simulator will surely be your best friend.
So to answer your question less vaguely, yes. You can own the iPhone 5s and develop for the 6. There is no real release information of the iPhone 6 at the time anyways, so I would not let it play too large of a factor in your decision.

I want to uninstall Elements 10 but it is not shown under Programmes and features in my Windows 8. How do I do it please?

I want to uninstall Elements 10 but it is not shown under Programmes and features in my Windows 8. How do I do it please?

See if this helps:
https://helpx.adobe.com/photoshop-elements/kb/manually-remove-photoshop-elements-10.html

Reboot before sysprep when I want to add an installation task with Office 2013

Hi all,
I want to buid a reference computer with a genuine Win7 wim file, correct drivers, uptodate patches, and usefull applications. So I use a “Build and Capture Task Sequence”. The new reference image captured, I can use it with WDS or a media
to any computers, using a second and different “Build and Capture Task Sequence.”
All things were right, I could add Acrobat Reader, Java and some others application, but it failed when I tried to add “Add Application Task” with Office 2013. I could import the software, I discovered the new panel to configure config.xml
and mychoice.msp, but when I run the Tasq sequence, when it begin to sysprep the OS, a few time before the capture, the computer reboots. Sysprep does not run, and the image is not captured.
I can add any software installation in the Tasq sequence but not one with Office 2013.
What do you think about this issue?

Hi,
Some pieces of advice, since I have managed to create a Windows 7 WIM file with Office 2013 embedded without any problems:
Build your reference image in a virtual machine, not on physical hardware, to prevent a gigantic driverstore with drivers for one or more models, and having to rebuild your image every single time you use a new model. This is not how MDT works, MDT works
hardware agnostic, since it inject's drivers of hardware for each model before the WIM file is applied to your target computer.
Do you really want to embed applications like Adobe Reader and Java in the image? They have a release every month. Do you want to (or is there room for) updating your image every single month? Put them in the deployment phase of your task sequence. This
way these applications are left out the WIM file, but are installed after the WIM file is applied to your system. Yes this takes a little bit more time when deploying a machine, but that's time you'll save on not managing your WIM file every single month
Check your
log files, make sure your machine is not Domain Joined, since that is the biggest mistake people make when sysprepping a machine. And check
Setuperr.log for any sysprep errors. Guaranteed it has noting to do with Office 2013
Good luck!
If this post is helpful please click "Mark for answer", thanks! Kind regards

I want to add another ipod, but under a different account and user name can i do this and how?

I want to add another ipod under my exticting I tunes. But want to set it up as a different account and user. Is this possible and how?

The easiest way is set up a new user profile on your PC. Then copy the iTunes folder to the public folder and from there copy it to the iTunes folder in the new user profile.
(this way you can use music in both accounts, even if you bought it from Apple - it needs to be DRM free though, so older stuff might be protected)

I get the firefox pop up "do you want to remember this password", but it does not save it. There is no "yes" option on the pop up. How can I get Firefox to save my passwords?

I want Firefox to save my passwords as it has in the past, but now it is not doing so. I am using version 6.0.2, I see the pop up asking to remember the password, but firefox does not save the passwords. What can I do to correct this so FF starts saving my passwords?

Firefox 4 and later versions place a key icon on the location bar that allows to (re)open the dialog to save the password at any time.<br />
That pop-up dialog has a button labeled with "Remember Password".<br />
If you click the arrow next to that button then you see the other choices ("Never Remember Password for this site", "Not Now").<br />

Want to add an image but with actionscript not a s:Image

Similar Messages

Maybe you are looking for