Want to add old Airport Extreme for Printing

I just replaced my old Airport Extreme (white flying saucer style) with a brand new Airport Extreme. The new Airport is working great.
I'd like to add the old one back on to the network to use exclusively for printing (HP Officejet Pro L7650) 4 computers ranging from an iBook, to a Mac Mini, MacBook and a brand new iMac.
Did a hard reset on the old airport, plugged it in, and there's no sign of it in the Airport Utility. Tried unplugging, restarting, etc etc.
Any ideas? Thanks!!!!

Well, I went and left it alone for an hour and came back and both airports were recognized and everything is working fine!
Thanks for reading...

Similar Messages

HT3728 I do not need another wireless network but want to use the airport express for printer access only. Can this be done and how?

I do not need another wireless network but want to use the airport express for printer access only. Can this be done and how?

You can configure the AirPort Expess to "Join a wireless network" and enable the Ethernet port so that Ethernet devices will be able to connect.
In order to print from the iOS devices, you will need to have an application like Printopia installed on your Mac. The Mac must be active when you want to print.
More details here: Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
There is a free trial available for Printopia, so make sure that it will work before you buy the AirPort Express.

Using an aiport express + airport extreme for printing.

I have an airport extreme to which I connect a lexmark color laser printer. Everything works well. I just moved and am now using DSL. There is no phone jack in the room where I want to put my printer. Can I use the airport extreme for my wireless internet through my dsl phone line and then use an airport express to hook up my printer and print wirelessly? Can I use a second airport express for a second printer which will go in yet a different place?

Another option would be to setup the Express units as clients on your Airport network especially if you don't need to extend your network.
You will still be able to print, but avoid the bandwidth hit that using WDS (extending the network) has.
iFelix

How to add old airport extreme 11g to new airport extreme 11n to extend network?

I am trying to use my old Airport Extreme 11g to extend my wireless network from my newer Airport Extreme 11n. Are they compatible?

They are, but you may want to think twice before using this approach. The reasons are: 1) The extended network will only operate in the 802.11g Radio Mode, and 2) The overall bandwidth will be reduced by half for each base station added. Since this will be a "g" network, you'd be getting around 25-27 Mbps maximum of bandwidth.
If you still would like to pursue this, please check out the following Apple Support article for the details.

Airport time capsule, add Airport extreme for stronger signal

I have a new Airport Time Capsule set up and running. My old Airport Extreme (5th gen) is sitting unused. I'd like to hook it up because I can't get a USB drive to work off of the TC (according to posts here it requires a powered hub).
I've read posts about setting up more than one Extreme, but feeling overwhelmed by all the terms. Also, much of the advice, including articles here, pre-dates the TC. From what I've read, the version of Airport Utility makes a difference too. I have the latest, 6.3.1.
First question: Can somebody explain, or point me to current articles, the differences between hardwiring (ethernet) the old AE to 1) the TC or 2) my wired Internet router (Verizon). A third option is, I think, is to set up the old AE stand-alone, connecting via wifi only, in a different part of the house.
Here's what I'm trying to accomplish. I live in a big old house with internal brick walls. I want to strengthen the signal throughout the house. One network, one password, security not a huge problem because we're rural.
I'm all Apple (Windows is banned from my house), and all software and OS up to date (10.8.4; I forget what cat it is).
Second question: depending on the answer to the first, am I looking to do an extended network, bridge network, hidden network (what is that?), roaming? I see these terms but am unclear on the distinctions. I'm sure many lurkers will have the same question.
Thanks,
Steve

Hi Again.. !!
There are two basic methods of connection.. wired by ethernet.. much the superior method to be used in every case possible.. (less gremlins!!). Even homeplug (EOP we call them here).. adapters are a better alternative to..
Extend wireless. This is apple terminology for what everyone else calls wireless repeater.
Wireless repeater as the name suggests.. picks up the wireless signal from a wireless source and retransmits it.. in the process it slows all transfers by half.. or more.. so it is inefficient.. only use where wire cannot be run.
Now to your specific question.
First question: Can somebody explain, or point me to current articles, the differences between hardwiring (ethernet) the old AE to 1) the TC or 2) my wired Internet router (Verizon). A third option is, I think, is to set up the old AE stand-alone, connecting via wifi only, in a different part of the house.
If the verizon router is the main router of the network.. with the TC plugged in and working in bridge mode.. then you can plug the old AE into TC or verizon router.. it will make no difference. The TC is working as a switch and AP only.. so plug into one or the other both are handled by the verizon router which does not know or care where the devices are plugged in. There is one consideration.. the TC and AE are gigabit.. the verizon is likely to be 100mbit.. so if you can plugging into the TC will provide gigabit link. Only relevant to ethernet connected computer on the AE and TC talking to each other.
AE stand alone is useless to you.. in stand alone you connect to it but have no connection to the rest of your network or the internet.
Second question: depending on the answer to the first, am I looking to do an extended network, bridge network, hidden network (what is that?), roaming? I see these terms but am unclear on the distinctions. I'm sure many lurkers will have the same question.
If you connect by ethernet you set up roaming.
See http://support.apple.com/kb/HT4260
If by extend wireless you simply set the extend.. it is by its very nature nothing but a repeater so must use the same wireless name and password etc.

I have an old Airport Extreme that I want to password protect. I being told that Airport Utility 5.6 is needed to manage the base station. When I download it and try to install that utility I told that it is not compatible with OS X 10.7.4

I have an old Airport Extreme that I want to password protect. I being told that Airport Utility 5.6 is needed to manage the base station. When I download it and try to install that utility I told that it is not compatible with OS X 10.7.4

The odds are that you downloaded AirPort Utility 5.6.1.....which will only work with Leopard and Snow Leopard Macs.
Since your post indicates that you are using Lion 10.7.4, you need the correct utility for Lion. The link is below:
AirPort Utility 5.6 for Mac OS X Lion

If i purchase a new airport base station can I use my old airport extreme 802.11n (3rd Gen) as both an extender of my wife for multiple iphones and as a router?

I operate an old airport extreme base station 802.11n (3rd gen).
There are 4 iphone5's and 1 iphone4 on my network along with 2 laptops running 10.6.8 and 10.7 respectively as well as two desktops with the same configurations as the laptops.
I get a sense that the iphones may/will be useless the new airport.
Can I use the old base station (operating as an extender/bridge/router) so that older equipment will operate in the short term until they are upgraded?
Thank you.

I get a sense that the iphones may/will be useless the new airport
They will work fine with a new AirPort base station. You can use an iPhone or iPad to set up and configure the new base station. If you want to use a Mac to set up and configure the new AirPort, it will need to have at least Lion 10.7.5 installed. Mountain Lion 10.8 or Mavericks 10.9 could be used as well.
Can I use the old base station (operating as an extender/bridge/router) so that older equipment will operate in the short term until they are upgraded?
You can use the older AirPort base station to extend the wireless network. No updates will be needed to your iPhones or Macs.

Got a power adapter for an old Airport Extreme lying around?

Hi, I just bought an Airport Extreme eBay and the didn't realize that the guy wasn't selling the power cord with it. Obviously the thing is useless without power. Apple doesn't sell the adapters anymore and I'm having trouble finding one online.
Does anyone out there have an old Airport Extreme power adapter gathering dust in a drawer? Thanks a lot. scott

Hi lllaass,
Thanks for your great answer.
That website link is for a1105. Is it same as a1103?
Also would you know if the power connection port is simlar to the one for appletv? I have an apple tv from 2007 which no longer works. Perhaps I can use that to power the mini.
Thanks again!
Avatariq

How do I add an airport extreme to a cable modem with only one ethernet port, while keeping that port connected to my Mac?

I have a mac pro connected by ethernet to a cable modem via ethernet. There is only one ethernet port on the modem.
I want to keep the Mac connected via ethernet for speed. Is there a way that I can add an airport extreme to this set up - for my ipad and roku, and for guests to use - or do I need to buy a router to put between the modem and the mac?
If I need a router, what kind?
Thanks.

The modem connects to the WAN "O" port on an AirPort Extreme router.
The Mac Pro connects to one of the three LAN <-> ports on the AirPort Extreme router.
Or if you do not need the ability to connect a hard drive to the USB port on the router, you can save a bit by using an AirPort Express.
The modem connects to the WAN "O" port, the Mac Pro connects to the LAN <-> port
Either the AirPort Extreme router or AirPort Express router will allow up to 50 wireless device to connect.
There are many other wireless modems offered by other manufacturers as well.

How to set up Airport Extreme for 11ac and 11n?

I have just purchased the new Airport Extreme (August 2014) because Apple's website states
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
I then looked for some documentation for setting up but cannot find anything.
Hence my question here.
How to set up Airport Extreme for 11ac and 11n simultaneously?
At present the new Extreme is no better than my previous 2 year old one.
Thank you.
Michael

How to set up Airport Extreme for 11ac and 11n simultaneously?
Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
That is advertising. The real information is usually found in the small and hard to read footnotes:
Based on theoretical peak speeds. Actual speeds will be lower.
AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
Please report on your results.

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme with updates thru Snow Leopard but now seems to only allow WEP encryption instead of WPA.

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme network, run from a intel iMac with updates thru Mavericks but now seems to only allow WEP encryption instead of WPA and can't connect to Time Capsule. Airport Extreme Base was controllable from either computer up through Snow Leopard (I didn't do any of the Lion upgrades). Then when I upgraded to Mavericks I lost the ability to use Airport Utility with this hardware on the Sunflower but could still connect wirelessly to network without any problems. But now with the Time Capsule upgrade the Sunflower is blocked from network by a dialogue that requests ony WEP password, not WPA pwd used by Time Capsule. Neither can I use the old airport extreme base to extend the time capsule network since I can't input the correct password/encryption approach to join it. Is there a work around? Would a newer but old Airport Express be able to extend network to Sunflower? Or maybe a third party wireless (such as Netgear, Dlink, etc) that has browser type control rather than special utility?
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this--so is it true now that the only access control is via WPA2 pwd now (which appears to be the encryption pwd and not the time capsule pwd)?

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule?
I can’t claim to completely grasp the issue(s) you’re describing, but the underlying problem is presumably your iMac’s obsolete AirPort card. Whatever the case, an obvious (if not particularly helpful) answer to your stated question would be to connect your iMac with an ethernet cable, using powerline adapters as an alternative if you don’t want to have wire running all over the place.
My still fully functional clamshell iBook, with an original AirPort card, connects wirelessly to my 4th Generation TC network by means of a cheap 802.11b/g/n USB Wi-Fi adapter. This might be an option for you too.
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this
When you edit your TC's settings the access controls appear under the Network tab, don't they?

Is it possible to share a disk on airport extreme for both Time Capsule use and Windows use

Hello
I was hoping to add some better backup capacity to our home. Can I use the same disk attacheded to the USB port of an Airport Extreme for Time Capsule use for our Macbooks, as well as general use by the windows laptops> If not is it possible to add multiple disks to the Airport Extreme and designate one for Mac Laptops, and the other for Windows use.
Regards
Ted

Regardless of the client's OS, you can use the AirPort Disk (USB HDD attached to the AirPort Extreme's USB) port as a 'NAS' device. You also have the option of partitioning it if you actually want separate volumes to be used between Mac or Windows clients. I would recommend partitioning it for Mac OS Extended (Journaled) which would also format it for HFS+. Normally HFS+ volumes are not readable (natively) by Windows, but the Extreme's File Server will share this drive out with both AFP (for Macs) and SMB (for Windows/Linux) clients.
However, one note of caution. Do NOT use this AirPort Disk for Time Machine backups as this is NOT supported by Apple. Although a number of users have done so, a number of them also post here complaining of corrupted backups.

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network? I have an ISP provided wireless Router that has to remain as the base station. I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.

One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.

Can I use the Time Capsule strictly for system backup and continue to use my Airport Extreme for all my wireless needs

I want to use the Apple Time Capsule as an external drive and continue to use my Airport Extreme for all my wireless needs. Can I do that? The reason I ask is that my Time Machine utility cannot find the TIme Capsule - it only shows me the Airport Extreme, even when I "Rescan". SO I am unable to use the Time Capsule.

You will need to connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the Time Capsule.
Perform a "hard reset" on the Time Capsule by holding in the reset button for 9-10 seconds, then give it another minute to restart to a slow, blinking amber light.
Open AirPort Utility, select the Time Capsule, and click Manual Setup
Click the Time Capsule tab located below the row of icons to assign a name to the Time Capsule, a device password, and adjust Time Zone settings.
Next, click the Wireless tab located to the right of the Time Capsule tab
Change the setting for Wireless Mode to Off
Click the Internet icon, then click the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Click Update at the lower right to save the settings and allow 30 seconds for the Time Capsule to restart to a green light.
You are all set

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network?

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

Want to add old Airport Extreme for Printing

Similar Messages

Maybe you are looking for