Want to change pic sizes in a pdf slideshow...

Hi,
I've been round & round trying to figure a way to make my 4x6 jpeg images that have been downloaded from my camera smaller in a slideshow. Right now they either appear top to bottom with black on the sides when it's a vertical shot, or completely left to right with black at the top and bottom if horizontal.
I have even reworked the photos and saved them as smaller images in Photoshop CS2 and that doesn't help.
The reason I am holding onto hope is that I received a slideshow that claimed to be made with Photoshop Album Starter Edition 2.0 and the images were smaller, surrounded entirely by the black background, and it was more appealing ( imo : )
Thanks for any help in advance -
jb

Make the background the same as the slideshow. Increase the canvas size but
leave the image the same... It will appear to shrink..
Cheers

Similar Messages

In MAC, I want to change document size from 8.5X11 to 18X24 to create a poster to print through Staples. I created the doc originally in WORD, changed the size in WORD, converted to PDF doc. But PDF doc is still in 8.5X11. Read ADOBE support help info. Te

In MAC, I want to change document size from 8.5X11 to 18X24 to create a poster to print through Staples. I created the doc originally in WORD, changed the size in WORD, converted to PDF doc. But PDF doc is still in 8.5X11. Read ADOBE support help info. Terls me to change size in application rather than printer. BUT ACROBAT Pro does not give me a page set up option in FILE. I can only find one in the printer dialog box. Help!

from the FAQs on Staples website:
I have a file that I know is a PDF, but the website claims it is not in a PDF format. What should I do?
Check to see that the file has the .PDF extension. Also, check that the filename does not have any special characters such as an ampersand (“&”).
Regarding your measurements set to centimeters rather than inches; is it just in MS Word?
Or does it occur in all other applications.
Check your Work preferences first:
If it is happening in all your applications, check your Mac OS System Preferences.

I want to change the size and color of text in call out boxes and text boxes. How can I do this? Jack

I want to change the size and color of text in call out boxes and text boxes. How can I do this? Jack

Highlite the text inside the text box and then press Ctrl+E.

How can I change the size of a pdf source file, or, convert it to Word?

How can I change the size of a pdf source file, or, convert it to Word?

A lot depends on the form of the PDF. Is it graphics, a scan of a text file, pure text, or other? What version of Acrobat are you working with.
You can do a save as to get a WORD file, but do not expect great results. The ability to get a decent WORD file depends on what the form of PDF you are working from. If it was created from WORD with tags and all, you might get good results. If not, you might get a lot of messed up results.
Explain what you are starting with and your ultimate goal. Also check the audit of the file (should be under PDF Optimize) to see where the file information is concentrated (text, fonts, graphics, other).

X64 deskjet won't change pic sizes to print

Scanner won't change pic sizes for printing

Hello taco51,
Welcome to the HP Forums.
I see that you are having some scanning issues in regards to the size of the scan's.
So I can better assist you, please respond with which Operating System you are running as well as the exact model of the printer.
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How Do I Find My Model Number?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How to change page size to generate PDF ?

Hi,
I just finished a document : 4 pages on A4 format with texts and images.
I now have to generate a pdf file to send to the printer.... but the staff decided to change the format to a 80% of the initial size. I have to generate the pdf to the right size and I don't really know how to do it.
On the second hand, I have a question about the jpg images imported in my document. The printing company asked me to be sure to have CMJN pics. As far as i know, jpg is RVB. Does the pdf export make the change ?
thanks in advance.

isachrislisa,
In Preview you may Print to a reduced scale, and the medium you print to can be another PDF.
The color space question is an odd one, it seems to me, since I would think your printer should be the one to make such corrections. Without advanced graphics editing software, if would be difficult for you to transform your JPEGs from RGB to CMYK. A more reasonable request might be to keep all the photos and graphics in RGB so the printer has only color space to deal with converting. I'm sure that given some time, the commercial printing experts will jump in here with some better advice.
Jerry

Change physical size of a PDF?

I have a PDF 11" wide x 8.5" tall. That is the trim size and I need it changed to 11.25" x 8.75" to include the bleed. Is there a way to adjust the PDF? There are images on the current PDF that bleed off the page.
Thanks in advance.
Message was edited by: iniadman12

It depends on whether the bleeds are there or not. If they are, the 'crop' box is obviously set wrong, go Advanced > Print Production > Crop Pages which will bring it up, reduce the values in the crop box appropriately and you're done. If the values are already set to zero the PDF has been produced without bleeds and you'll have to go to the source document and export one with bleeds.

I have finished my iBook but want to change the size before ordering. Is it possible

Finished book. Can the size be changed before placing order?

Sure - what version of iPhoto? Ad is OS X 10.4.8 as you state correct?
Assuming it is not and you have iPhoto '11 then you simple select the book and duplicate it (Command D), open the copy and click on "change theme" and select the same theme and the new size -
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
the preview is critical since with a new size text may reflow
LN

I want to change document size.Don't know

Hi there !
I want to add a centimeter of blank space to each page of my document, without affecting document's layout.
I think is the opposite action of cropping.
But i don't know how to do it.
Need help !
thanks

I want to permanently crop pdf. How? Crop tool only hides the cropped space but inside our heidelberg RIP it (pdf's page size) shows its actual size.

Not very tech Davy, just figured out how to print a pic off phone to wireless printer, how do I change pic size from 8x10

Can u help

I tell you how. dumb luck. Certainly no thanks to "Apple Care" or maybe we should call them apple "careless." I told them my issue , and what I did to fix it so far. They tell me to delete the ipod photo cache and resync. They kill me.
What kills me even more is * I preface this by stating that I am in no way a racist, and this has nothing to do with race, color, or creed, it has to do with getting good customer service. I, myself, am disabled. I have an artificial pelvis and left leg. I know my limits, you wont see me trying to get a job where my disability affects the job I was doing. I running any marathons any time soon*
Id call apple care again, but Im not fluent in some of the languages the telephone customer service agents speak. Funny, youd think that apple would try and get customer service people that can be understood over the phone. Its like hiring a blind guy to drive a school bus. They will get you somewhere, but probably not where you wanted to go. Maybe we should call the Apple HR dept and have them hire some deaf people to field service calls, would be just as smart as hiring someone who was mute, or in Their case someone that can not be understood by an English speaking person. Just my two cents. Feel free to pass it on.

Change Font size of Query Title in PDF Output

Hi Experts
I want to change font size of Query title when its exported to PDF format .
I change the text properites to Header size 1 , but still its not reflected in Output in PDF .
Any suggestions,
Regards,
Jawad

Hello Jawad,
Please tell me the solution for this.

Changing Photobook Size

I am using Photoshop Elements 9 and want to change the size of a previously created Photo Book from 8x8 to 12X12. Does anyone know how this can be done?

Give this a try:
1 - select the book icon and type Command+D (duplicate).
2 - open the duplicate book, click on Themes and select what you want.
If the resulting book is not what you expected you can delete the duplicate and return to the original to try another method.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

How to change font size in smartform and set layout of smartform

Dear abapers,
I want to change font size in smartform and also set the layout of smart form how can we do this.
Thank you sir.

Hi,
you can do it first you need to goto smartforms tcode there click on radiobutton 'Style'.
Give any name and click on create. Right sideyou can find character format right click on it and create a node .A pop will raise gve a 2 characterlike z1 or a1 etc click on font tab gve size and font style and click on save and activate. Use this style in your smartform you can apply what ever styles created in styles you can use it in your smartform by that smartstyle name.
When we create text in output options give your smart style name and click on general attributes . Select your text and apply the style what thse size it should be and what the font style it should be.
Goto smartforms tcode and select formpainter in application bar set layout according to your requirement.
Thanks,
venkat

How to change font-size of application menu

I want to change font-size of application menu. How?

Hi,
To change the font size of the Application menu, you need to change main.css file.
at 'body, td, input, select, textarea' class.
For more detail about main.css, please refer Bookshelf
Siebel Developer's Reference at [8 Cascading Style Sheets].
Regards,
Joseph Arul Dass

[SOLVED]how to change the size of default font ?

, hellow everyone. I am newbie here and I recently installed Archlinux with Awesome WM,the default size of font is too small, in some cases,the characters even can not be clearly seen,I want to change the size of fonts so that I can read words comfortablely ,what shall I do to make the font bigger? I tried to find the solution in wiki or forum but failed, thank you in advance!
Last edited by mabier (2010-07-23 03:41:09)

karol wrote:A never used Awesome WM but I think you're referring to some app's font - is it your shell, browser or what? Or maybe is it some toolbar or panel (I don't know if Awesome has those)?
the fonts in firefox browser and terminal emulator xterm are too small. I can enlarge characters in firefox browser by "ctrl +", but small fonts in xterm can not be modified by me at the beginning, but now I create and configure ~/.Xdefaults, and this problem has been solved. the fonts in panel of Awesome WM was also very small at the first, after configuring Awesome's theme.lua file, everything is fine now.:D
Last edited by mabier (2010-07-22 06:31:03)

Want to change pic sizes in a pdf slideshow...

Similar Messages

Maybe you are looking for