Want to change template for an application
I made my first test application on oracle's provided platform.
I chose the template with No tabs. Now I realize I need the tabs. I dont find a way to change the template assigned to an application.
Is it really allowed or not ??
regards,
raghav..
Raghav,
If you just want to change template for that particular page, go to edit page and in the Display Attributes select the template that you want, by default its Application level default. For changing the application default template go to Home>Application Builder>Application #>Shared Components>Themes>Create/Edit Theme and there you can change the default values.
Thanks,
Manish
Similar Messages
-
I chose a template for the free partner site but want to change it for another one
I chose a template for the free partner site but want to change it for another one. Is there anyway this is possible and to start again? Been looking for hours to fix this and kinda got frustrated and deleted most of the code.....
I had the same problem.
I wanted to test the free site with a dummy site first but I since I can't delete the dummy site now to start afresh, I have no choice but to go elsewhere. -
Problem in Creating Source Files (Templates) for Original Application Files
Dear Friends,
I am trying to ccreate "Source Files (Templates) for Original Application Files" . I checked the link
http://wiki.sdn.sap.com/wiki/display/PLM/Templates-Document+Management
I created a new DOc. type TMP with no statuses, checked in KPO, assigned no. ranges.
Created DIR & assigned the template file, checked into storage category. DIR no. 10000000390 created.
In Workstation application "DOX" in define templates for originals : doc. type: ZGA, application: DOX; language- EN; no - 01; In source doc- entered doc. type- TMP, doc. no.- 10000000390, part & version
Assigned for required source file copy" ZGA doc. type. -- Default Appl. as "DOX" workstation application.
Now created a DIR with ZGA doc. type, when clicking on originals , DOX prompted and clicking on "create with template" . TMP doc. 10000000390 template open in a new window. I edited & saved. close the MS word window. When comes to DIR, it prompted, Original was changed Do you want to save the original?.
clicked on yes.
Saved the ZGA DIR. When I saw the new ZGA DIR created it didn't capture. Where I went wrong ?
Regards,
Sai KrishnaDear Ravindra,
By going this below link, it seems we can use template for creating ne wdocument & attach the same.
http://wiki.sdn.sap.com/wiki/display/PLM/Templates-Document+Management
Following messages if you read, it may be clear.
By having templates in place we can utilize the pre-defined documents instead creating right from scratch.
Entries can be done in the Template and save the document.
Templates are used for standardization and uniformity. By using templates time consumption for creation of documents will reduce as most of the details are maintained in the master template and the same can be utilize by using the template when creating documents.
If in DMS editing functionality is not there what is the use of templates- documentation?
Regards,
Sai Krishna -
if I have an iPad 1 with no camera, and I want to change it for an ipad 3 is true that if I give my ipad I get the cheapest ipad 3
Apple does not take trade-ins. In a few countries Apple does work with a company who will give you some return on an existing device; for the US, see:
http://www.apple.com/recycling/gift-card/
Similar programs are available in a few other countries, and some dealers may have their own trade-in programs. But you most probably can get more for your device if you sell it yourself, as Eric suggested.
Regards. -
My stops because of the wrong answer to the secret question, and I want to use it for evil application from Apple Store?
Hello mr sami,
Thank you for the details of the issue you are experiencing with your security questions. I found an article with some useful information if you cannot remember the answers to your security questions:
What should I do if I don't remember the answers to my Apple ID security questions?
Try answering them at least once to see if you can get them right, even if you are not sure you remember the answers to your security questions.
If you are confident you can't remember them, try one of the following:
If you have three security questions and a rescue email address
sign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers.
If you have one security question and you know your Apple ID passwordsign in to My Apple ID and select the Password and Security tab to reset your security question.
If you have one security question, but don't remember your Apple ID password
contact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
Note: If you have forgotten your password and answer your security questions incorrectly too many times in a row, you will be unable to try to answer your security questions for a period of time. During that time you will not be able to reset your password and will not have access to your account.
You can find the full article here:
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
If you continue to have issues, please contact our Account Security Team as outlined in this article:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Shame to remove Get Info option to change language for individual application!
Its a shame for Apple to remove the Get Info panel option to change language for individual application! For these days I used Leopard, where I had this option, now I bought a brand new mac, for a bunch of money, with Lion, and this option had disappeared. What's that? Apple is working on making more complicated the life of their users?
Thanks for your tip, but languageswitcher not set the language permanently just for the applications started from that application. Very inelegant and windows like way.
I used the terminal to set the defaults for individual application, but that is step back to the age of command line.
I spent with this problem 1 hour instead of 1 minutes. Big step back. -
Issue in Oracle 11g Database Change Notification for Java application
Hi,
I am trying to use Oracle's Database Change Notification in Java application.
I followed the sample application (+DBChangeNotification.java+ , Example 29-2), provided in the following link:
+[http://download.oracle.com/docs/cd/B28359_01/java.111/b31224/dbmgmnt.htm#CHDEJECF]+
I am able to see that the Registration of the SQL query is successful.
But, when I do changes to the table registered, notifications are not received in the Listener class (+DCNDemoListener.java+).
Ideally, the method DCNDemoListener.onDatabaseChangeNotification() should be invoked on any insert/update to the registered table. But this method is not getting invoked.
The execution has stopped in the following line of DBChangeNotification.java Class.
this.wait();
+==> The application was WAITing indefinitely in this line, as the NOTIFY() from DCNDemoListener.java was not executed.+
I am using VPN to connect to Oracel server. Remote Oracle Server is protected my firewall. Is this the reason for not sending the notifications from Oracle server?
The version of software used are given below:
Oracle Client - Oracle 11.1.0
JDK - 1.6
Oracle JDBC Driver - ojdbc6.jar
Can someone help me to resolve this issue?
Thanks in Advance.
Regards
Sam
Edited by: Ponsu on Apr 7, 2011 10:41 PMHi,
I am having similar issue. Where you able to resolve it.
I am also using the same example you were using.
I am using the following version.
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
Compatibility: 11.2.0.0.0
I do not see any notification coming back from the DB.
Appreciate your help.
Thanks & regards,
Ebe -
Technical document template for WebDynpro application
Dear SDN Community,
Can you please tell me where can I get a Technical Document template for building a WebDynpro(Java) application.
Thanks!
Surya.hi,
refer to Technical Specification link
Ashu -
Change template for Form Checkbox Item?
I would like to remove the <label> tag from the template for Form Checkbox items and replace this in the list with my own label tag
E.g. something like this
select '<label onmouseover...>'||reference||'</label>', table_id r
from tabel
order by 1
Is this possible?
Thanks & regards
Edited by: rw on May 3, 2012 6:10 AMCheckbox is <input> HTML tag with type="checkbox"
The Label that wraps this Input is generated by Apex while rendering and stores important information.
It is not advisable to play with that area even if someone gives you a technically feasible solution like "use a jquery selector to change the tags" in onload event,etc.
Please find a more elegant solution to your problem.
E.g. look at APEX_ITEM API
Regards, -
SMARTFORMS - want to Change Editor - For 'Code'
Dear Friends,
I can work on Report & Screen efficiently.
But, I learned Smartforms as Trial & Error - also developed a few.
For Smartforms - In 'Code' - I have to write no. of lines ( a lengthy code).
Is it possible u2013 to change the editor (like u2018textu2019) or display the Code in full page.
Thanking you in anticipation
Regards,
AshleshaHI,
If you want to change the code of smartform, Open the smartform and go to Global Definitions -> then click on initialization tab. Click on pencil button to change it to write mode.
Alternatively,
After activating the Smartform, Go to Menu -> Environment -> Function Module Name ->Click.
Copy the name of the FM including slash. open SE37 and paste the FM name to display the source code of the Smartforms.
Hope it will help you.
Thanks & Regards
Rocky Agarwal -
Want to select DAQ for my application
Hi friends,
I am newbie to labview.. I am doing a project in which I have to measure the ball valve position.. for this I have attached ring magnet below the ball. when the ball rotates the magnet rotates along with ball and by using hall sensor we can measure the position.
I will be using max 2 hall sensors... for this application, which DAQ is better.. cheap and best
Thanq
Every Expert was once a Beginner!!This is the wrong forum for such questions.
So you could either post this at the Data Acquisition Forums or, which is the better idea, send an email or call your local NI Office.
Please also provide a bit more information regarding your sensors, e.g. voltage levels and also about acquisition rates you will need, and what kind of system should control this application, e.g. Windows Desktop PC or mobile Laptop, and so on.
Thanks,
Christian -
I changed the parameter -alias author when i want to Configure signing for tablet applications
hello,
i thought i should replace -alias author by -alias myname in the blackberry-keytool command, so i'm registered with this wrong command and now i can't sign my apps and even i can't do the correct registration again cause it displays "client already registred", how can i fix this
thanxHi haresbadr,
Two things:
1 - You'll get a better response in the developer forum at http://supportforums.blackberry.com/t5/Tablet-OS-SDK-for-Adobe-AIR/bd-p/tablet
2 - You might need to delete the signing key data store on your computer. Which OS are you running?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you! -
Changing Template for large intranet site
Hello,
I need to make template changes for a rather large intranet
site. The templates affect the entire site that have several
directories. Is there a way to do it by directory rather than the
entire site at once?Yes. Consider this example -
PARENT PAGE (index.shtml) -
<html>
<head>
<title>I AM THE PARENT</title>
</head>
<body>
<!--#include file="foo.html" -->
</body>
</html>
INCLUDE FILE (foo.html) -
<p>Hello World!</p>
> 3. Save the code in the templates that will be common in
all files as
> .SSI
> file (.txt files?)
You can use any extension you want. However, if these files
contain
server-scripting, then the extension would have to reflect
that. In other
words, if foo.html in the example above contained -
<p><?php echo "Hello World!"; ?></p>
then it would have to be named foo.php.
> 4. Change all files that now use the templates to
include the .SSI file
Yes - or in the event that the includes were in the
non-editable regions you
would need to change the template.
> 5. Rename the files using the .SSI files to have an
extension of .SHTML
The parent pages would have this extension or an extension
that reflects the
coding method used. Your links to these pages would have to
change as well.
Be aware that this will break any existing bookmarks to the
now defunct
pages, including those that have been spidered by the search
engines....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"ValedaW2" <[email protected]> wrote in
message
news:[email protected]...
> By definition, would the SSI files be considered
fragment files?
>
> I am trying to determine the steps I would need to take
to setup my
> environment. This is what I understand from what you
have told me.
>
> 1. Make sure that SSI is enabled on the server.
> 2. Make required changes to the templates.
> 3. Save the code in the templates that will be common in
all files as
> .SSI
> file (.txt files?)
> 4. Change all files that now use the templates to
include the .SSI file
> 5. Rename the files using the .SSI files to have an
extension of .SHTML
>
> Does this seem right, or have I missed something?
> -
Changing template's email application form
Basically I have downloaded a template. Everything is fully
customised and edited. But the last section is "Contact Me". You
fill in the form and it sends off. Problem is I dont know where it
will send the information to and how i change the destination
adress to my own. Could somebody help me? I'm a rookie and have
made good head way so far, but am stuck on this one. I would be so
greatful for any one who could tell me what to do.
Many thanksadampritchett87 wrote:
> Basically I have downloaded a template. Everything is
fully customised and
> edited. But the last section is "Contact Me". You fill
in the form and it
> sends off. Problem is I dont know where it will send the
information to
> and how i change the destination adress to my own. Could
somebody help
> me? I'm a rookie and have made good head way so far, but
am stuck on this
> one. I would be so greatful for any one who could tell
me what to do.
>
> Many thanks
HI! Most probably it would be in the cgi script or asp script
where you
would define your server and ports. take a look in those
files there should
be some comments letting you know. Flash Froms can send info
from the fields
that the user enters and whatever else you want to pass but
its the scripts
that retrieve it and then pass on the server.
Paul -
Changing template for "email work item "
Hi,
TFS Web Access has the possibility to send the work item in an e-mail. (The enveloppe on action bar).
By clicking on this Icon, a new window opens with some basic work item information.
I suppose the content of the e-mail is based on a template.
My question is: Is it possible to update this template (red box)?
Jeppen Twitter: @DoSTHGreatHi Jeppen,
Thanks for your post.
As far as I know there’s no default way to change that template, please refer to the discussions in this similar post:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/2a63b27d-4bfd-413f-bff9-825d6bdc99fe/how-do-i-change-the-ides-send-work-item-to-outlook-email-template?forum=tfsworkitemtracking.
But you can add the required column in work item query result, then select work item from query result to send email. Please refer to the workaround in this post:
http://stackoverflow.com/questions/10518254/can-i-modify-the-email-thats-created-from-a-wi-when-i-click-the-send-work-item.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Remove Special Character "/" from file name
I'm trying to upload a PDF located on my desktop to a server that won't accept special characters, and the mac path is by default ~/desktop/file ... all those forward slashes read as "special characters" and the file is rejected. I moved the file as
-
MacBook Pro 17" Unable to re-install OS from DVD
MacBook Pro 17" (2007 model # A1212 / MA611LL/A), was experiencing some difficulty printing, so i tried rebooting.... Mac did not boot - got as far as the Grey screen with Apple Logo, and the circling "clock" - inserted the Leopard DVD to run Disc Ut
-
Finder crashes when selecting home drive or dropbox
I got a new MacBook Pro today and the first thing I did was migrate a backup from time machine. Then **** starts. Cant open my home folder or dropbox folder. Finder crashes.
-
Centering flash movie top and bottom in dreamweaver?
Hi all, I'm a novice user of dreamweaver. I've placed a flash movie in dreamweaver and centered it left and right but how can I center it top and bottom so it floats?
-
Connect to Oracle DB using DBCP and tnsnames.ora
I have a Spring-based web app that is running on Tomcat and uses DBCP to connect to Oracle. The problem: Need to pull database connection information from tnsnames.ora file. There is Oracle Client installed on a server, so tnsnames file is available.