Want to change the Material group in Scheduling aggrement after creation?

Hi Gurus,
I want to change the Material Group in scheduling aggrement. I am able to change in PO but i m not able to change in Scheduling aggrement. It is in display mode after creation.
I have checked the SPRO setting it is in optional entry only.
Can anyone please help me. Wr we have to check the settings..
Ot this is Standard SAP has provided.
Please help me..
Thanks
Venkatesh P

Hi,
Thanks for your reply.
EKPO is standard table. That we cannot change and that do end user want to chagne the material group.. This is not for one time.
Please help..
Thanks
Venkatesh P

Similar Messages

How to change the material group in existing PO

Hi
I want to change the material group in already exist PO. like one material have the material group 1002. i have changed the material group in material master i.e. 0022.
In already existed PO for this material, material group is not changing. how do we do this.
Thanks
Pankaj Garg

if ur po is processed then it is not possible
if it is not processed for gr then just delete the existing material and give new entry of material in same po
regards
kunal
award if helpful

Changing the material Group in PO -- the GL assignment doesn't change

Good morning,
we have a material group linked to a valuation class.
When we create a service purchase order, we use this material group and the G/L account is automatically updated, but if we change the material group, the G/L account doesn' change.
SAP PARAMETERS
- Material Group 1 is linked to valuation class XXXX
- Material Group 2 is linked to valuation class YYYY
- In SPRO the field G/L account is set on Display (screen layout).
Our user can change the material gruop, but the G/L account doesn't change too and this mistake could generate a wrong accounting document.
We want that the G/L account change automatically when the material group is changed and, if we cannot, we'd like to block the change of the material group (but not in Screen layout, because we are buying service without material master and we need to inser the material gorup).
Thanks for any ideas.
regards

Hi klausj,
Did you find a solution to this?
We have the same issue.
/Thomas

Changing the material group

Hi Gurus,
I need to change the material group on certain materials. What implications do we have when we try to change the material group
Thanks
Anusha

Hello Anusha,
If the material is already used in purchasing, when you change the matkl field the information message M3531 :y u are changing material group, but material already used by purchasing occurs
if you double click on this message you can see the following explanations :
When changing the material group of a material that is already being used by the purchasing department, you should note that:
   The purchasing statistics show how much of a material group has
    already been ordered. Unitl the change is made, the material is
    managed under the old material group and therefore the old material
    group statistics are updated. From the moment the change is made,
    the new material group's statistics are updated.
   Some purchase orders may derive from contracts with item categories
    referring to material groups. If this is the case, the material
    cannot be used after the change has been made.
   Every purchase requisition is allocated to a release strategy that
    can depend on the material group. A new release strategy may apply
    to a new material group. Purchase requisitions that were created
    before the change are subject to the old strategy; purchase
    requisitions that were created after the change are subject to the
    new strategy.
Hope this can help
Regards,
Mauro

How can I change the material group in purchase order?

Hello,
I' ve changed the group of material and is not updated in the purchase order created. Is there any way you see the new material groupl in purchase order?
Thanks,

Sorry for the late answer.
Jeyakanthan A's suggestion may be good in case of few items.
You can also mass maintain purchase order material groups (EKPO-MATKL) in transaction MEMASSPO, though they are only in display mode in the purchase order transactions. If it doesn't work, you'll get a reason why.

Automatic change of G/L account with change of material group in PO

Experts,
we're facing an issue with the change of the G/L account in a PO after the material group has been changed. We're creating purchase requisitions from SRM (account assignment type K) with material group and G/L account. Starting to create the PO with ME21N from PR we want to change the material group. After the change we still have the original G/L account.
Valuation class and account assignment is defined correctly and if we create a manual PO the correct values are used. What do we need to change so that the G/L account is directly changed with the change of the material group?
Thanks
Hubert

Hi Hubert,
I am assuming that you are not using the material master and trying to default the G/L account using the material group.
Can you check whether the valuation class assign in this config for the respective material group are same.
Purchasing> Material Master > Entry Aids of items without a material Master.
System should default the G/L account if you maintain different valuation class in material group with the respective G/L define in OBYC.
Secondly, Please check the Account assign categories configuration for the account modification.
Purchasing > Account assignment > Maintain Account assignment Categories.
Cheers!
Daya

Error in CIF while change in Material Group in R/3

Hi,
I have assigned Material Group Description as an external field in Extra Tab in APO. When I create a material the CIF updates the filed correctly.
When I change the material group the CIF gives and error "Location does not exist for external location FR02, type , and BSG BSG1" where FR02 is my Plant.
When I delete the queue and re execute the IM the change is updated in APO.
Can someone tell me why the above CIF error appears for every change done.

Nilesh,
It is common for experienced ABAPers to be able to determine this on their own. Normally all you should have to do is explain in business terms what is happening, and the ABAPer should be able to troubleshoot the problem without you first discovering the code details for him.
There are a couple of ways to populate the aux fields in the SCM product master. The first userexit I would look at would be CIFMAT01 on the R/3 side.
Best Regards,
DB49

How to change the Mesure Group ID, without losing the existing partitions in cube developement

Hello all,
I am creating my cube and i created measure groups and partitions for those Measure Groups. The problem is now i want to change the measure group id. but when i do that, i am losing my partitions and aggregations on those partitions. is there way to change
the measure group id with out effecting/losing the partitions? please let me know your thoughts.
Thanks in advance.
Prajwal
prajwal kumar potula

Though its not my question, but just curious, where these references might be? What are we looking for?
Are you talking of permissions in Roles etc or its somewhere additional we might have references?
Not it will not be in permissions or roles. Off the top of my head you would be looking for references to "Measure Group1" in child objects of the measure group, so partitions and aggregations and maybe calculated measures. They would most likely look something
like the following:
<MeasureGroupID>Measure Group1</MeasureGroupID>
http://darren.gosbell.com - please mark correct answers

Change the account group

Hi
If we create a customer as sold to party and we want to change the account group of that customer (as a ship to party)
is it possible ?? if yes please suggest me how??
Thanks

Hi,
For a new customer you can change account group using XD07, But for any old customer already did postings in that then you cannot able to change account group.
Hope this will correct. Thanks!
Kishore

Change the material no. range

Hi Friends,
I want to change the material no. range for the material types defined in the system. Currently they are assigned 5 digit no. range I want to change this and increase to 7 digit no.
Can some please guide how can I achieve this.
Regards,
Wasim.

Hi
You can change length of material number ranges from Tcode OMSL
Thankx & regards
suleman.

Is there any Impact if we change the Valuation Grouping code.

We have 2 valuation grouping codes
0001 For US plant and 0002 for Europe
For 0001 GR/IR clearing is 200000
For 0002 GR/IR clearing is 200001
We have 2071 plant is there it is assigned only for company code 430.
It is belongs to Europe plant. But they are assigned to 0001valuation grouping code.
Now they want to change the valuation grouping code for CC 430 from 0001 to 0002.
I have verified in OBYC transaction for 0001 and 0002 all the valuation classes and GL accounts are same, exepet GR/IR clearing account.
After changing the grouping code it will change the GR/IR account for CC430.
If you need more information please let me know.
Thanks
Ravi

not answered

Changing existing Material Group user defined names to new mat groups

Hi Gurus,
My client is using conventional Material Groups user defined names for ages in their system.
Now they have requested us to workout for switching over to UNSPSC material groups Global Standardization.
While carrying out the exerice, they have asked us to completely clean up the entire system to replace the new material group with old in all Masterdata, transaction data including statistics table in pr, po, stock and in everything
If any one of you have carried out this exercise and if you have any useful documentation, please inform me
Thanks and Best Regards,
Mohan

Hi,
If you change the Material groups in Material master the system the system will not update the PR/PO/Stock or others.
You need to change all the documents to update the New Material groups.
For Material master update you can use the LSMW.
You can update the PR/PO also but if the PR/PO is subjected to Release Strategy then you need to derelease then change the material group then update and if it is based on the Material group then while update the new release strategy will apply and you have to change everything.
Think of that if you have huge data then it is very difficult to change all the documents. if the data is Less you can proceed .
Instead of deleting old material groups just add the new material groups and use them in future for all your process.
rgds
Chidanand

Change the register group of a device

Hi All,
I am trying to implement device modification in the background.
I'm using ISU_S_DEVICEMOD_PROVIDE to get data for a device
and
ISU_S_DEVICEMOD_CHANGE to change data for the same.
I want to change the register group of a device. I am unable to implement this.
Has anybody ever used these function Modules to implement device changes in the back ground.
I would also like to know how would we fill the meterdoc structure.
Thanks

Hey Yevgen,
I am trying to use the ISU_S_DEVICEMOD_CHANGE function module, but i m unable to get the results. I want to do that in the online manner without any dialog to appear.
The main purpose that i want to accomplish is Change register configurations, multiplier, number of dials, allocated register group, unit of measure.
So can you please tell me what are the details that are to be given.
Thanks
Rishi

Are you sure you want to change the extension from... BLOCKS Finder Editing

This is weird and is driving me nuts, but some Macs do not allow further Finder editing of file or folder names if I change their names (usually including numbers, dots and so on) in such a way that I receive the warning:
Are you sure you want to change the extension from..?
After I confirm that I want to change the name, the Finder does it but gets locked for editing (I can do other things) and does not allow any further file or folder editing until I force quit of Finder or reboot the Mac.
I have found that if right after confirming that I want to change the name I select the file and hit return (which selects its name), no problem arises. But I must do it in one or two seconds, or else it will be too late.
IN SUMMARY:
1. Change file or folder name including numbers and dots at the end.
2. Get the message "Are you sure you want to change the extension from..."
3. Confirm that I want to change the name.
4. FROM NOW ON, I CANNOT CHANGE THE NAME OF ANY FILE OR FOLDER UNTIL I FORCE FINDER QUIT. Unless of course I do the trick indicated above real quick!
Any hint? Any way to know what is going on? This could be a bug of Mac OS X 10.4.x or earlier or a problem with a third party application. But how to know what is going on to prevent it? As said, some Macs show this issue, but not others.
Note: some related issues on this section searching for:
Finder Loses Keyboard Input
or
Sure change extension
For instance:
http://discussions.apple.com/thread.jspa?messageID=1974048
http://discussions.apple.com/thread.jspa?messageID=1466505
Hint: some file or folder name changes are more prone to cause the issue than others. For instance, renaming a folder (and confirming it) as:
Testing.r00
brings the bug 100% of the times.
Any idea of what is going on? Thanks.

The message is a warning that you are doing something that the OS thinks is going to possibly cause a problem. You are creating the situation and the OS is doing nothing other than what you are asking it to do.
I don't know any exact answer why you can't access your files, but I do know that there are a few characters and things that will cause problems because they mimic names of invisible files. When you make a name that is close to being the same it can treat the file as the special one... meaning you can only access it via Terminal.
Ones you cannot use at all: the colon (:), slash (/), single or double period as first characters. (taken from Finder Help with a naming files search) It is best to stay away from any special characters as a rule. Also avoid using a period and 3 character suffix unless it is one that you are purposefully assigning so the file belongs to an application.
That said... even with the over 200 applications on my system I couldn't repeat your Testing.r00 problem. So, I don't know if it may be application related or not.

How can we change the purchasing group which it is maintained in R/3?

Hello All.
In case of MM, purchasing group is assigned to material master.
It means purchasing group is maintained based on material code.
But SRM has different maintenance level.
As you know that purchasing group has the responsibility based on material group (Product category).
So we should change the purchasing group from R/3, when end user create shopping cart.
How can we change the purchasing group which it is maintained in material master?
Thank you,
Best regards,
SH.

Hello So Hee,
I am not a technical guy.
But for your requirement i am building a logic.
I am not sure whether it will work.
You need to check with your ABAPER.
It is as below:
When the SC is approved and the other configuration is correct ,
PR is created in ECC by the virtue of BAPI.
You want that the pur grp should be populated on the base of matl code and not on matl grp.
Hence in SC you will not fill up pur grp.
In the programme for BBPSC01 i.e. SC creation you will add modification that it will call a custom FM.
This custom FM will get the matl code from SC and will find the value of pur grp from R/3 MM01i.e. matl master(you may get in MARA).
Now in the BAPI you need to incorporate this additional value of yr pur grp field.
So the desired pur grp as per yr R/3 matl master will be populated in yr R/3 PR.
Again: this is all hypothesis.
That's all I can help you.
BR
Dinesh
<b>Reward if helps</b>

Want to change the Material group in Scheduling aggrement after creation?

Similar Messages

Maybe you are looking for