Want to change the storage parameters of a table

Hi Friends,
I have a problem.My tablespace is filled because i assigned larger intial size for each table.
And now i want to change the storage parameter values.
I would appreciate if anyone can help me out ASAP.
Thankyou
Sunil

Hello Arun,
Thanks a lot for the prompt reply. The thanks is accompanied by the points.
After reading you answer I was searching for option to refresh variable. There I landed at the option where it says "Change variable values". After clicking it, just beside the variable entry box is a button (extreme right). If you click that you get another popup where you can reset the personalization.
Regards,
Prem.

Similar Messages

Can i change the storage device for a user on my macbook pro

That basically says it all

It means i want to change the storage device on the computer. I have the drive on the macbook, the one built into it, and i have an external drive. I want to know how i can make the external drive my main source for storage. And if its possible i want it to be for a specific user on the computer

Change the storage server of archiving files

Hello Gurus,
I have archiving files in iseries storage, but because the disks in iseries servers is very expensive i want to change the storage server to Intel server with Win2003 or Linux S.O.
This change is posibble? i would appreciate your suggestions.
Regards,
Ernesto Castro.

Hi,
With my understanding about accessing the archive data from the storage system, i can say that it is possible.
1. First you should check with archive server vendors (such as opentext or Documentum) whether their application will support in this scenario.
2. When you are relocating the archived data from one storage to another storage system then the link between the archived data and the physical path will be disconnected.
Solution: A. create a content repository of new location and assign this content repository to all the archiving objects that are affected.
B. Delete the build Infostructure for the archiving objects and after assigning the new content repository build the infostructure again and try to access the archived data.
Hope this mail could help you.
-Thanks,
Ajay

How to change the storage location using BAPI_OUTB_DELIVERY_CHANGE

Hi !
I want to do batch split in the delivery using BAPI_OUTB_DELIVERY_CHANGE.
Can anyone tell me how to pass/change the storage location of each batch item.
Is there any other BAPI that can do the batch split and populate the storage location also for the split batches?
Regards,
Firoz.

Hi all,
BAPI_OUTB_DELIVERY_CHANGE can be used to do batch split and updating storage loaction against each item of an outbond delivey.
I have done that in the folllowing way:
1 > Firstly i have updated the storage location for each delivery item using 'BAPI_OUTB_DELIVERY_CHANGE' passing some mininal parameters.
   Fetch the item details from LIPS table based on the outbound delivery and pass the corresponding fields to item_data, item_control and item_data_spl parameters and passed into intenal table li_lips.
Loop at li_lips inti lw_lips.
    lw_item_data-deliv_numb           = lw_lips-vbeln.
    lw_item_data-deliv_item             = lw_lips-posnr.
    lw_item_data-material                = lw_lips-matnr.
    lw_item_data-fact_unit_nom      = lw_lips-umvkz.
    lw_item_data-fact_unit_denom = lw_lips-umvkn.
    lw_item_data-base_uom            = lw_lips-meins.
    lw_item_data-sales_unit            = lw_lips-vrkme.
    lw_item_control-deliv_numb      = lw_lips-vbeln.
    lw_item_control-deliv_item        = lw_lips-posnr.
    lw_item_data_spl-deliv_numb   = lw_lips-vbeln.
    lw_item_data_spl-deliv_item     = lw_lips-posnr.
    lw_item_data_spl-pick_denial   = 'X'.
    lw_item_data_spl-stge_loc       = v_lgort.
"(This would be your Storage Location which you want to be updated)
Appending work areas into internal table to pass as parameter
    APPEND lw_item_data_lgort     TO li_item_data_lgort .
Appending work areas into internal table to pass as parameter
    APPEND lw_item_control_lgort TO li_item_control_lgort.
Appending work areas into internal table to pass as parameter
    APPEND lw_item_data_spl_lgort TO li_item_data_spl_lgort.
endloop.
Passing the delivery no in the work area of header data
lw_header_data-deliv_numb           = v_delivery_no.
lw_header_control-deliv_numb       = v_delivery_no.
lw_header_tech_control-upd_ind   = 'U'.
Calling BAPI to change the Storage location
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
    EXPORTING
      header_data       = lw_header_data
      header_control   = lw_header_control
      delivery               = v_delivery_no
      techn_control     = lw_header_tech_control
    TABLES
      item_data           = li_item_data
      item_control       = li_item_control
      return                 = li_return_change
      item_data_spl    = li_item_data_spl.
Calling BAPI to committ the task
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
2> Then i have used the same BAPI again 'BAPI_OUTB_DELIVERY_CHANGE' to do the batch split/update batch only(if required) and change the Actual Delivered Quantity.
Here you have to pass the same thing along with actual delivery qauntity and different batches to do batch split.
Here it is assumed that Batch numbers, actual delivered quantity are coming from an internal table i_lqua.
Looping through Internal table to get Bin details
LOOP AT i_lqua INTO w_lqua .
Clearing work area before use
    CLEAR : lw_item_data, lw_lips, lw_item_control, lw_item_data_spl.
Reading table comparing metrial number
    READ TABLE li_lips INTO lw_lips
    WITH KEY matnr = w_lqua-matnr BINARY SEARCH.
If read is successful, passing values from table
    IF sy-subrc EQ 0.
Passing the delivery details into Item level table
      lw_item_data-deliv_numb              = lw_lips-vbeln.
      lw_item_data-deliv_item                = lw_lips-posnr.
      lw_item_data-material                   = lw_lips-matnr.
      lw_item_data-batch                       = w_lqua-charg.
      lw_item_data-dlv_qty                    = w_lqua-verme.
      lw_item_data-dlv_qty_imunit         = w_lqua-verme.
      lw_item_data-base_uom               = w_lqua-meins.
      lw_item_data-hieraritem                = lw_lips-posnr.
      lw_item_data-usehieritm                = 1.
      lw_item_data-fact_unit_nom          = lw_lips-umvkz.
      lw_item_data-fact_unit_denom      = lw_lips-umvkn.
      lw_item_data-sales_unit                 = lw_lips-vrkme.
      lw_item_control-deliv_numb           = lw_lips-vbeln.
      lw_item_control-deliv_item             = lw_lips-posnr.
      lw_item_control-chg_delqty           = 'X'.
      lw_item_data_spl-deliv_numb        = lw_lips-vbeln.
      lw_item_data_spl-deliv_item          = lw_lips-posnr.
      lw_item_data_spl-stge_loc            = w_lqua-lgort.
      lw_item_data_spl-pick_denial        = 'X'
Appending work area into internal table to pass as parameter
      APPEND lw_item_data TO li_item_data.
Appending work area into internal table to pass as parameter
      APPEND lw_item_control TO li_item_control.
Appending work area into internal table to pass as parameter
      APPEND lw_item_data_spl TO li_item_data_spl.
Clearing work areas after use
      CLEAR : lw_item_data, w_lqua,lw_item_data_spl,lw_item_control,
                    lw_vbpok, lw_lips.
    ENDIF.
ENDLOOP.
Passing the delivery no in the work area of header data
lw_header_data-deliv_numb           = v_delivery_no.
lw_header_control-deliv_numb       = v_delivery_no.
lw_header_tech_control-upd_ind   = 'U'.
Calling BAPI to change the Batch/Batch-Split/Delivery Quantity
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
    EXPORTING
      header_data           = lw_header_data
      header_control       = lw_header_control
      delivery                   = v_delivery_no
      techn_control         = lw_header_tech_control
    TABLES
      item_data                = li_item_data
      item_control            = li_item_control
      return                     = li_return_change
      item_data_spl         = li_item_data_spl.
Calling BAPI to committ the task
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
This is the only way which i found as better way to do the Batch split and updating storage location togetherly.
I hope this code will help you.

How to change the storage location in Lightroom 3.6.?

How to change the storage location in Lightroom 3.6.?
I use my internal hard drive NTFS of my MacBook Pro as my storage location of Lightroom 3.6. being installed in Snow Leopard now but the data of my photos get too big now. I have two fast and big external hard drives eSATA now which I want to use for my data/photos. I know how to copy the data from one hard drive to another but I don't know how to change the settings in connection with Lightroom easily. I still want to watch all fotos on my MacBook Pro but don't want to save any fotos on my internal harddrive any more. Isn't it possible to have the programm Lightroom on my internal harddrive but the data on two times on two different extermal hard drives? If I look at Lightroom - settings of catalogue - I see that the internal harddrive location is my storage location now but I my two external harddrives don't appear as folders. Why? How to change that so that the external hard drives appear in Lightroom and I can watch all my fotos immediately (sometimes using external hard drive 1 and sometimes using external hard drive 2)?
My external hard drives are in HFS+ but I use the software of Paragon so that there shouldn't be any problem to read and write the data (I use also Final Cut Express so my external hard drives are HFS+ and not NTFS).
I want to impert many data from CDs - should I copy the fotos first to my external hard drive and then import it into Lightroom or is it easier to import the data directly from the CD in Lightroom so that I don't have to name the folders two times?
I see that I have to sort the fotos from the CDs in new different folders and an used to do that in Finder of my MacBookPro. In Lightroom I don't want have to click each of hundreds of fotos to be able to put it into the right folders ... But how to import only a part of a CDs quickly into the right (newly created) folders?
Kind regards, Karin

Would you really leave the names of photos like DSC05271.ARW and DSC05271.jpeg etc.?
What if I name them f.i. like ...
2013-09-11_Austria_1_mountain.jpeg
2013-09-11_Austria_2_mountain.jpeg
2013-09-11_Austria_3_valley.jpeg
I would NOT do this. I would not change the file name.
I would add keywords and other metadata to the photos to identify the content of the photos, and from that point on, I would use keywords and other metdata to search for these photos.
However, let's look at the big picture. I think there are three different methods of organizing
Organize via keywords and other metadata, and not via operating system constructs such as file name and folder name
Organize via operating system constructs such as file name and folder name, and not via keywords and other metadata
Some combination of 1 and 2
You can choose any one of the three methods above, the choice is yours. I am a very strong believer that for most people (and it sounds like you are one of those people), method 1 is the best method. However, not everyone agrees.
There are drawbacks to using file names to identify your photos. One big drawback is that you must type the information into each photo's name, and this is more tedious than if you wanted to assign the keyword "mountain" to the photos, you can assign the keyword to multiple photos at once. Also, if you mis-spell the information in the file name on any photo, you have just made the photo much harder to find; whereas in Lightroom, the keyword can be assigned via a mouse click (so you can't mis-spell it), or by typing the first few letters and Lightroom (auto-fill) will find the correct keyword name. So using keywords is a much simpler way to go.
.. is this much too complicated to do that in Lightroom or even dangerous to got lost of photos?
It is very simple to add keywords, as I explained for this case. Create keywords "Austria", "Mountain", "Valley"; then select the desired photos, and then click on the check box next to the keyword name. It is much more complicated in my opinion to rename the photos in this manner.
There is less danger in doing this via keywords than the danger doing this via file names, because of potential mis-spellings.
If I spend a lot of time in editing photos (in Lightroom or Photoshop) I don't want that I loose those photos f.i. later if Lightroom won't be the software I use regarding the photos (in 10, 20 years?!)
Lightroom will OPTIONALLY write your keywords and other metadata to the files (or sidecar files in the case of RAW). Every photographic application I know of (and I'm sure those in the future) can read the keywords and other metadata. So if you ever want to switch to some other software, your keywords and other metadata are available. you can turn this option on via Edit->Catalog Settings->Metadata, check Automatically Write Changes to XMP.
So I have to create two folders - one with the originals and one with the edited exported photos?
No, you do not have to create two folders. You don't have to export everything, but if you do, you can put the exports wherever you want, including putting them in the same folder as the originals, with different name.
Why not edit them in Photoshop and save them in the second folder which I import later in Lightroom? Because it takes longer?
Wow, you really need to think about: Why are you using Lightroom?
Could you explain this to me? Why are you using Lightroom?
If your goal is to edit the photos in Photoshop, and then put them in folders with whatever custom name you want to give them, then what is the benefit of using Lightroom? You can do all of this WITHOUT Lightroom. You keep explaining that your intended goal is to use Photoshop and folders/file names, and this is a goal which AVOIDs all benefits of Lightroom. I can't understand what you think the benefits of using Lightroom are for you.
It is starting to sound to me like Lightroom is not the right software for you.
Some people want to see a movie on their TV and are able to watch a DVD (not all!). Flickr seems to be a solution for movies in a big size (many GBs) to share them with friends (?)
You haven't mentioned this before, and you should check the rules on Flickr regarding how long a video you can upload.

I want to change the Legacy assest data through as92

Hello Sap Gurus
I want to change the legacy Assest data for my client. While Changeing its give error that Transfer the data or close the Year. year 2005 is closed. In Assest data Transfer , In date Parameters given data is 31-03-2007. For 2006 Dep is not at run.
Can any one help me in this Regards.
Thanks
Raj

Hi Raj,
Use transaction code AJRW to run the Fiscal Year change for 2005 and AJAB to run Year End Close. Do the same for 2006.
Then, go back to AS92, indicate the Asset number, subnumber and the company code. Click on Take over values. Correct the APC and the Accummulated Depreciation value to what it should be and hit the enter button. This would determine your NBV for you. Save your entries.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

I want to change the selection text in the standard report/transaction .

I have added one screen field to the standard report , now i want to change the selection text in the standard report/transaction

Hi,
>
scoy123 wrote:
> I have added one screen field to the standard report , now i want to change the selection text in the standard report/transaction
Refer:-
CONSTANTS : c_comment(20) TYPE c VALUE 'write your comment'.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) c_comment.
PARAMETERS : p_matnr TYPE matnr.
SELECTION-SCREEN END OF LINE.
Hope this helps you.
Regards,
Tarun

I want to change the email address for both the app store

I want to change the email address of both the app store & iTunes I created an iTunes account then bought a family pack @me.com so everything is not straight forward I have a gmail log in for both iTunes & the AppStore & then more than one Apple ID I have just increased my cloud storage but I am tired of having to use a gmail address for the App Store & iTunes especially since gmail would appear to be less secure that @icloud.com so how do I change this ?

Not a good idea. Apple content is forever associated with the Apple ID that bought it. Apple does not transfer content from one Apple ID to another Apple ID. Apple does not merge Apple IDs. The only Apple ID that can (re)download, update and authorize content for use on Macs, PCs and iOS devices is the Apple ID that bought it.
You can however change the email address associated with an Apple ID;
http://support.apple.com/kb/HT5621

MM 335 "You want to change the profit center...'

Hi guys,
in a material master I have the field profit center blank and I want enter a value but the message MM 335 '"You want to change the profit center but material stock still exists"...I have implemented OSS notes for release 6.03 but the message continues to go out..the stock for the Plant in which I want enter Profit center does not exist, is it correct that this message goes out?In your opinion which is the correct way to update material master?I have tried to transfer all stock present in all Plants on which that material is opned with mov type 309 but the message go out again..It is a strange thing , I don' think taht the unique way is to chenge the nature of message from E to W..
thanks in advance for your attention
Bye

Stock may be there still under Plant Stock and Storage Location stock, in previous period.
TO make it Zero do the following things
If previous period stocks exist, you can make a withdrawal posting as follows:
1. Post the same amount to current period stock (for example, using movement type 561) so that previous period stock and current period stock are identical.
2. Make a withdrawal posting in the previous period for the stock together with posting date (for example, using movement type 562).
Hope the steps will help to resolve the problem.

I want to change the computer that I sync my ipod to. How do I do that without having to download all my apps again

My computer is really slow, so I want to change the computer that I sync my ipod to. What is the easiest way to change computers and get all my apps, music, pics, books etc. to the new computer for syncing?

Assuming that there is enough storage space on your iPod to hold all of your songs, the most direct way would be to combine all of the song files from your various computers to the computer you wish to use as your main library and sync all. If you don't still have all of the files that are currently on your iPod for what ever reason, there are programs that can copy non-store purchases from iPod to computer, which will allow you to follow my first suggestion. Search this forum for recommendations of which programs will work for your setup. iTunes Store purchases can be downloaded again if you have the log-in and password, but there is a limited number of times you can do that. If you have run out of authorizations, you can de-authorize all devices once per year. There is more to this than I can tell you now, so search the forum for that info too.
One thing to be careful of is that iTunes may ask you when you first hook up your iPod to a computer that is not the same as the last computer it synced to is whether you want to sync to it now. If you say yes, it will delete all of the content on your iPod and sync what ever you have iTunes set up to sync. You will want to say no to this prompt if you see it unless you have first gathered all of your song files into the new library.

I want to change the privacy settings on my e-mail, I provided the password once and now it opens without one

I want to change the security settings on my e-mail. I provided a password once and now it opens without one. I want to keep my messages private.
== This happened ==
Every time Firefox opened
== When I updated.

Websites remembering you and automatically log you in is stored in a cookie
Tools > Options > Privacy > Cookies: "Show Cookies"
See also [[Cookies]]

I want to change the order that my 9 email accounts are listed on the left sidebar (folderpane?).

Mac Snow Leopard
TB 24.5.0
Suggestions have pointed me towards finding prefs.js file, but I can't find it (library/mozilla, libary/application support/mozilla not there nor in search function)
Tried with showing hidden files too.
Really a pain as I need the more active accounts on top opened but not enough room with less active accounts stuck in the middle.
No RSS feeds, local folders on bottom OK.
Just want to change the order but can't seem to find the solution.
Free smile to whoever helps me out! Thanks

Use this add-on.
https://addons.mozilla.org/en-US/thunderbird/addon/manually-sort-folders/

I want to change the security answers but have noticed the email address is a hotmail one. I cannot remember the password and frankly it keeps telling me that the account doesn't exists. So how can I change that to my personnal email?

I want to change the security answers on my account but have noticed that the email address I listed is a hotmail one which I cannot get into. How do I change this as I only see an edit button for logging into iTunes but not one where I can change in the security answers. Thankyou

You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(94157)

I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?

I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?

Does this involve iPhoto in some way?

I have a 17" Mac Book Pro and a 13" Mac Book Pro...both use the same Apple ID. My wife now wants to change the Apple ID on the 13" to her Apple ID. How do I do this and not loose the information on that computer?

I have a 17" Mac Book Pro and a 13" Mac Book Pro...both use the same Apple ID. My wife uses the 13" and now wants to change the Apple ID on the 13" to her Apple ID. How do I do this and not loose the information on that computer?

Hello Teddy53149 and welcome to Apple Support Communities,
Follow this procedure:
Change your OS X account name and home directory name - Apple Support
As they recommend and as always when you're messing with administrator accounts back everything up first.

Want to change the storage parameters of a table

Similar Messages

Maybe you are looking for