Want to change time of multiple slides in one go & synch to music

Just got my first mac, trying to create a DVDslideshowwith about 150pics and using two songs. Can't seem to work out how I can adjust length of slides to maybe 2secs each - without doingeach one imdividually and/or sych music to the amount of pics I have so it all runs and ends smoothly. Used to do this on proshow gold but its not mac compatible !!!
imac Mac OS X (10.1.x) first time mac user,

Welcome to the forum, Fresh Rose.
This posting may provide some tips:
http://discussions.apple.com/message.jspa?messageID=607322&ft=y&#607322
Karl

Similar Messages

Change duration of multiple clips "as one" overall clip?

Here's my situation:
I have a song at 127 BPM. I have a music video (muted sound) at 125 BPM.
I've spent a long time slicing up clips from the video into different channels and muliple clips to form one timeline (but with many clips and channels lined up).
I now want to change the overall duration of the video clip to match the BPM of the song (which I should have done in the first place), but the video is, as previously stated, sliced up in mulitple clips in multiple channels. How can I change the duration of all clips at one time, where the end and start of the clips still line up to eachother?
This would've been incredibly easy if there were a un-nesting feature. Where I can nest multiple clips, change the duration, and un-nest the clips to slices clips with a changed overall duration. (Which is not possible. Yes, I can drag the clips out of the nested clip, but the clips will still have the original duration).
TL;DR: How can I change duration of multiple clips "as one" overall clip?

Never mind. I've found a alternate solution. I used a time stretch calculator at http://mp3.deepsound.net/eng/samples_calculs.php and time stretched all the clips to match the BPM of the song. Now I only need to snap all the clips, which can be done one by one, but I found this trick to snap all the clips at once: http://vimeo.com/27428526.
I'll just let this thread stay open so other with the same problem can find this

How do I apply one same transition to multiple slides in one go?

How do I apply one same transition to multiple slides in one go?

After you have done either of the previous options to get the transition on the current slides, you can add the transition to the Master Slide so all your new slides will default to the same transition.

Problems copying and pasting multiple slides from one captivate to another.

I have been able to copy and paste several slides into
another captivate and suddenly this has stopped working. I am using
the ctrl key to select multiple slides (a set of 3) and the using
the Edit drop-down to select copy slide. Then, I click on the other
captivate and click paste slides. It is only bringing 1 slide, the
first one, and not the 2nd and 3rd... any ideas. I've had another
set of eyes look over my shoulder... and we're both scratching our
heads.
Also, for some reason the text entry boxes are being copied,
but the failure caption associated with it does not come along. It
also copied the button but lost the association with the text entry
box. WTH?

This might work, this might not. I have copy paste problems
on a regular basis and all that works for me is closing Captivate
down and then re open and continue. At worst, a reboot tends to
solve this glitch in my experience.
Good Luck

Changing properties of multiple resources in one transaction

Hi,
Does anyone have an idea how to change a property in multiple resources in one atomic transaction.
There are some interesting comments regarding the use of "mass calls" in various SAP documents but not really anything specific.
The changing of one property in multiple resources is not the problem. This is easy. The challenge is the operation in one transaction. There is a ITransactionManager in the KM Javadoc but this looks like more of an internal class.
Thanks.
Dick

Does this imply that the properties of these selectors can be modified simultaneously?
Correct.

I want to change my email address from the one you have on file

I want to change my email address !

Hi rumple stiltskin,
Kindly contact our chat support:http://helpx.adobe.com/x-productkb/global/service-b.html
Regards,
Florence

Multiple slides on one page

hi
i would like to print from my ipad via airprint my documents from university. to save paper it would be very helpful to print multiple pages on one sheet. (per example 4 pages on each side of my sheet). is this somehow possible via airprint. do i need a special app.
Thank you very much for your help
sf1990

I am not aware of any apps that can do that.
It may be possible to create the handout document on a computer and then click the "Save as PDF" option in the print dialogue. Then you could transfer the PDF handout file to your iPhone, which you might be able to print from there. I hope this helps!
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

I have 2 iPads and want to change the user I'd on one of them so they are not the same

How do you get a new Apple ID for one of two ipads

You realize that you will not be able to share the apps that you have already purchased with the one ID on the iPad that you want to use with a new ID, don't you? Apps, music, books, movies .... All purchases are tied to the ID that was used to make the purchase.
my advice is don't do it. If there is some real compelling reason why you need to do this like you are giving the iPad to someone else, that's another story.
iTunes: How to set up an Apple ID within iTunes - Support

Scanjet G4050- How to scan multiple slides at one time with Image Capture

Using Scanjet G4050 with Mac and OS 10.6. Thus using Image Capture to control scanner. When using the slide template for 16 slides, Image Capture only allows me to select one slide at a time.
Is there a way to fill the template with 16 slides and have Image Capture scan all 16 slides without having to select each one in turn? It is a real pain to have to direct each scan.

Hi jpbear
I am going to take credit for finding the solution that the HP Photo Suite from OSX 5 works in subsequent Mac OSX. Look at this web page.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4019&lc=en&cc=us&dlc=en&sw_lang=&product=3236...
If this doesn't work for you, I am willing to guide you to finding the page. I downloaded a copy a few minutes ago and it was still available. The Photo Suite is actually an amazing set of applications but the one you want to use with your HP ScanJet G4050 is HP Scan Pro. I continue to use it with OSX 9 but other people have reported that it continues to work with OSX 10 as well. It allows me to scan the 16 slides on the bed individually with one pass. It also has some colour balancing function.
Frangelica

Changing metadata for multiple photos at one time

Hi,
Is there a way to change the metadata (ie information) of multiple photos at a single time.
For example, I have a ton of pictures from a vacation. I would like to be able to select all of those photos and add the name of the vacation to all of them.
Thanks,
BT

1) Select all the photos you would like to modify
2) Select Photos->Batch Change
3) Set the drop-down to 'Comments'
Have at it!

Time machine multiple macs sharing one HD via Wifi

I need help with time machine app.
I would like to use one external hd for multiple macs to backup with time machine.
I read about different method, the one that I think is better for me is to sharing the HD on a network.
I have one Imac and two macbook.
What I did is to connect the HD to the Imac and than I shared the HD volume with sharing files.
I create two accounts for the macbooks and then I connected them.
So far so good.
But I din't use this network configuartion for the first backup, what I did instead was to connects the different computers one by one with thunderbolt.
Now I had to change the destination dirve from the old HD (connected via thunderbolt) and the "new" shared HD - actually is the same drive!
I thought that the macbook time machine app just recognize the last backup and just makes a new one from that point.
But it seems doing a new backup. (Last backup: none)
It creates a new file Macbook of Alessandro.sparsebundle
Any tips?
thanks in advance
Alessandro

Start with B 5/6.
Time Machine Troubleshooting

I want to use Time Machine to restore from one IMAC to a different IMAC. How do I do that?

I use Time Capsule to back up two different IMACs. I want to use the back up from machine A to restore machine B.
When I am on machine B I can't see the back up on machine A. How do I do this?

Look at Q16.
The whole 14-17 is good to read so you understand what you are doing.
http://pondini.org/TM/FAQ.html

I am giving my old macbook pro to my mother as a present, and i want to change the itunes account to hers, with none of my music there. how can i do this?

how can i change accounts to make it like completely empty for her?

Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
       A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
       B. Clone to an external drive using using Carbon Copy Cloner.
          1. Open Carbon Copy Cloner.
          2. Select the Source volume from the Select a source drop down menu on the left side.
          3. Select the Destination volume from the Select a destination drop down menu on the right
              side.
          4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
              sure to opt for that.
               Destination means a freshly erased external backup drive. Source means the internal
               startup drive.
Step Two - Prepare the machine for the new buyer:
          1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
          2, Remove any Open Firmware passwords or Firmware passwords.
          3. Turn the brightness full up and volume nearly so.
          4. Turn off File Vault, if enabled.
          5. Disable iCloud, if enabled: See What to do with iCloud before selling your computer.
Step Three - Install a fresh OS:
     A. Snow Leopard and earlier versions of OS X
          1. Insert the original OS X install CD/DVD that came with your computer.
          2. Restart the computer while holding down the C key to boot from the CD/DVD.
          3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
              Optionally, click on the Security button and set the Zero Data option to one-pass.
          4. Install OS X.
          5. Upon completion DO NOT restart the computer.
          6. Shutdown the computer.
     B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because
                   it is three times faster than wireless.
          1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
              Utilities window appears.
          2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
          3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
              on the Erase tab in the DU main window.
          4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
              and set the Zero Data option to one-pass.
          5. Click on the Erase button and wait until the process has completed.
          6. Quit DU and return to the Mac OS X Utilities window.
          7. Select Reinstall Lion/Mountain Lion and click on the Install button.
          8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

Change center of multiple clips in one operation

Say I have 10 JPG files each as 10 second clips. I drag them to the timeline, I select all of them. I now want to move all of them into the top left quadrant of my canvas. I can't see how to do it given that motion seems to be set on a clip by clip basis. Is there some way of creating a filter that I can drag onto the selection to affect all clips? Again I can't seem to see one in the filters list. Is it a question of joining all of the clips into a single clip and thus applying a single motion in the viewer?

Adjust one image the way you want it. Copy, select the images, and use the paste attributes function.

Why are multiple slides under one table of contents button?

I'm using Captivate 8, and notice that when I preview my course, the table of contents buttons directly correspond with each slide but then after that, the remaining slides are lumped under one table of contents button. How can I fix this? In other words, when looking at the table of contents, it looks like my course only has 6 slides when in reality there's 30...many of which are lumped under the last button.

You have to scroll, they are not under one button at all.
Good practice is to group slides, then you'll see the hierarchy in the TOC and you are able to collapse all groups. That way the TOC will have a clean look, and the user can open a group to see the individual slides.

Want to change time of multiple slides in one go & synch to music

Similar Messages

Maybe you are looking for