Want to convert 32 bit assembly code to 64 bit assembly
hi
Friends
I want to convert 32 bit assembly code to 64 bit.
extern "C" long sparc_atomic_add_32 (volatile long* p, long val);
static void asm_code()
asm(".align 8"); \
asm(".global sparc_atomic_add_32"); \
asm(".type sparc_atomic_add_32, #function"); \
asm("sparc_atomic_add_32:");
asm(" membar #Lookaside | #LoadLoad | #LoadStore | #StoreLoad");
asm(" ld [%o0], %l0"); // l0 = *p;
asm(" add %l0, %o1, %l2"); // l2 = l0 + val
asm(" cas [%o0], %l0, %l2"); // if (*p = l0) swap([o0], l2);
asm(" cmp %l0, %l2"); // does it match
asm(" bne sparc_atomic_add_32");// if not try again
asm(" nop"); // delay slot filler
asm(" add %l2, %o1, %o0"); // set return code
asm(" membar #Lookaside | #LoadLoad | #LoadStore | #StoreLoad");
asm("retl");
asm("nop");
}
mickeyanton wrote:
Adobe recommends going to a 32 bit Lightroom
Adobe specifically recommended that to you personally?
It makes far more sense to install 64 bit Lightroom on a 64 bit operating system.
What problems are you having with 64 bit Lightroom?
Similar Messages
-
Convert 256-bit image to one-bit
I want to convert 256-bit bmp image to 1-bit.So please help me.
armalcolm wrote:
OK here's a frameworkUmm... Drawing onto a BI of TYPE_BYTE_BINARY should achieve this in just a few lines. The API says
When color data is stored in an image of this type, the closest color in the colormap is determined by the IndexColorModel and the resulting index is stored. Approximation and loss of alpha or color components can result, depending on the colors in the IndexColorModel colormap.
Of course, if this is homework then OP will probably be required to reinvent the wheel.
db -
Just upgraded to MacBook Pro running 10.8.4. Want to convert old movie files to put in Itunes. Can't upgrade QT player preinstalled, so downloaded QT Player 7 and purchased QTPlayer 7 Pro registration code. Can not get it to upgrade. Called Apple 2x. If you have a fix, you can email me direct at [email protected]
Want to convert old movie files to put in Itunes.
What does "old movies" mean to you? File type, audio and/or video compression format(s)?
Can't upgrade QT player preinstalled, so downloaded QT Player 7 and purchased QTPlayer 7 Pro registration code. Can not get it to upgrade.
Did you follow the instructions found here?
If you have a fix, you can email me direct at [email protected]
To which fix do you refer? Activatng QT 7 Pro or converting the files? Even with QT 7 Pro activated you may need to modify your QT codec component configuration depending on the file type and compression formats used to encode your "old movies." There may be many different problems here with each having one or more "fixes." Please try to be more specific regarding your questions. Converting a muxed VOB MPEG2/AC3 file would be very different different from converting an AVI DivX5/MP3 file depending on which application you are attempting to use. -
Hi, I recently put music on my ipad (manually, I do not sync because I dont like leaving music in my itunes) I realised they take up a lot of space because of the bit rate so I went into iTunes and pressed "Convert higher bit rate songs to 128 kbps AAC" Then I pressed apply and I got the message "Are you sure you want to remover 113 apps......." I have checked and sync Apps is unticked so my question is why does it say this and is there a way around it. Also if i tick convert to AAC will it convert the songs already on my ipad or just ones I add from now on.
SeasiderChris wrote:
Hi, I recently put music on my ipad (manually, I do not sync because I dont like leaving music in my itunes
Why not? That's what it is for.
So Restoring your iPad when it crashes and losing all your music is acceptable to you?
Then I pressed apply and I got the message "Are you sure you want to remover 113 apps......." I have checked and sync Apps is unticked so my question is why does it say this and is there a way around it.
Since you now want to sync the iPad and have told it you do not want to sync apps, it will remove them all.
Check the apps you want on the iPad.
Also if i tick convert to AAC will it convert the songs already on my ipad or just ones I add from now on.
It will only convert new songs added to the iPad. -
I want to convert this excel formula into Numbers formula =INDEX(Codes!$B$1:$B$9998;MATCH(TRUE;ISNUMBER(SEARCH(Codes!$A$1:$A$9998;'Curren t Account'!E4358));0))
Without knowing the structure of the spreadsheet, or what e3xactly you are trying to do, it would be hard to advise. however, have a look here: http://help.apple.com/numbers/ipad/2.0/
-
I want to convert my source code in Labview 5.1 to labview 2011
HI
I want to convert a labview program which is in labview 5.1 to labview 2011 version
i am not able to open the program in the 5.1 version.
if there is no way to convert it ,then can you tell me if 5.1 version is avialable online that is compatible with the windows7 .?
thanks
Attachments:
plant.vi 31 KB
PID.vi 104 KB
integration3.vi 18 KBPost your request in this Version conversion Board
The best solution is the one you find it by yourself -
Want to convert Sap standard report into alvgrid
HI PLEASE HELP THIS IS CODE BELOW OF SAP STANDARD REPORT CODE WANT TO CONVERT INTO ALVGRID
LEAS HELP
REPORT RFKOPR00
MESSAGE-ID FR
LINE-SIZE 132
NO STANDARD PAGE HEADING.
TABLES: B0SG,
LFA1, "Daten auf Mandantenebene
LFB1, "Daten auf Buchungskreisebene
LFB5, "Mahndaten
LFC1, "Verkehrszahlen
LFC3, "Sonderumsätze
BSIK, "Offend Posten
BKPF,
BSEG,
BSEGA.
TABLES:
BHDGD,
T001,
T001S,
*T001S,
T074T,
T074U,
TBSL,
TBSLT,
TCURX,
ADRS,
RFPDO,
RFPDO1,
RFSDO,
FAEDE.
FIELD-SYMBOLS: .
*Hilfsfelder
*---Prüfung ob mehrere Hauswährungen verarbeitet werden.
DATA: CFAKT(3) TYPE P,
CHECKSALDO(8) TYPE P,
CHECKAGOBL(8) TYPE P,
WAERS LIKE T001-WAERS,
WFLAG(1) TYPE P VALUE '0',
WAERS2 LIKE T001-WAERS,
WFLAG2(1) TYPE P VALUE '0',
PH-LINE(132) TYPE C.
*---Ermittlung aktuelles Geschäftsjahr über Funktionsbaustein.
DATA: CURRY LIKE BSIK-GJAHR.
*-Ermittlung Zahlungseingang bei Zahlungen mit Skontoabzug--
*ATA: ZVTAGE LIKE KNB4-VZS01, "Verzugstage
ZVSKONTO(8) TYPE P, "Zahlungsvolumen bei Zahlung mit Skonto
ZVNETTO(8) TYPE P, "Zahlungsvolumen bei Nettozahlung
ZVVERZUG(8) TYPE P, "Verzugstage
ZVMALVZ(8) TYPE P, "Zahlungvolumen * Verzugstage
"KNB4-VZSxx)
ZVTYP(1) TYPE C, "Skonto oder Nettozahler
ZVPER(4) TYPE C. "Periode letze Zahlung
*---Zeilenanzahl fü Adressausgabe -
DATA: ZEILENANZAHL LIKE ADRS-ANZZL VALUE 7.
DATA: KSALDO(6) TYPE P. "Saldovortrag
BEABZUG(6) TYPE P, "Berechtigte Abzüge
UBABZUG(6) TYPE P, "Unberechtigte Abzüge
JAHRAUG(6) TYPE P, "Kumulierter Jahresausgleich
KUMZINS(6) TYPE P. "Kumulierter Zins
Ausgabe der Mahndaten pro Buchungskreis.
DATA: INDEX(2) TYPE P VALUE 0.
Hilfsfelder
DATA: HF(1) TYPE C.
DATA: TXT_1(78) TYPE C, "Mahnbereich
TXT_2(78) TYPE C, "Mahnart
TXT_3(78) TYPE C, "Mahnempfänger
TXT_4(78) TYPE C, "Mahndatum
TXT_5(78) TYPE C, "Mahnstufe
TXT_6(78) TYPE C, "Mahnsperre
TXT_7(78) TYPE C, "Mahnverfahren
TXT_8(78) TYPE C. "Sachbearbeiter
DATA: BEGIN OF XMAHN OCCURS 10.
INCLUDE STRUCTURE LFB5.
DATA: END OF XMAHN.
Hilfsfelder
DATA: CHAR1(1) TYPE C.
DATA: FLAG1(1) TYPE C.
DATA: INTENS(1) TYPE C.
DATA: FLAG2(1) TYPE C.
*---- K o n s t a n t e n -
*---- DNULL zum Vergleich mit Datumsfeldern -
DATA: DNULL(8) TYPE C VALUE '00000000'.
*---- DECKBLATT = 'N' ==> Kein Deckblatt bei NEW-SECTION -
DATA: DECKBLATT TYPE C VALUE 'N'.
*---- 'H' = Hilfsfelder, die jederzeit fuer Berechnungen ver- -
*---- wendet werden koennen. -
DATA: BEGIN OF H,
STICHTAG(8),
OFFSET(2) TYPE P,
OFFSE1(2) TYPE P,
SOLL LIKE LFC1-UM01S,
HABEN LIKE LFC1-UM01H,
SALDO LIKE LFC1-UMSAV,
SHBKZ LIKE LFC3-SHBKZ, "Sonderhauptbuchkennzeichen
SALDV LIKE LFC3-SALDV, "Sonderhauptbuch-Saldovortrag
SHBLS LIKE LFC3-SOLLL, "Sonderhauptbuch-Lfd.-Saldo
SHBSL LIKE LFC3-SOLLL, "Sonderhauptbuch-Lfd.-SOLL
SHBHB LIKE LFC3-HABNL, "Sonderhauptbuch-Lfd.-HABEN
GBNUM LIKE lfC1-GBN01, "Geschaeftsber. Nummer ECKERT
GBUMS LIKE lfC1-GBU01, "Geschaeftsber. Umsatz
TEXT(15),
UMLOW LIKE BSIK-UMSKZ, "Umsatzkennzeichen
UMHIG LIKE BSIK-UMSKZ, "Umsatzkennzeichen
END OF H.
---- 'C' = Zwischenergebnisse, die aus Feldern des C-Segmentes ---
*---- berechnet werden. -
DATA: BEGIN OF C,
SALDO TYPE P, "Saldo
UMKZ1 LIKE LFC3-SHBKZ, "SHBKZ 1
SUMS1 TYPE P, "Sonderumsatz 1
UMKZ2 LIKE LFC3-SHBKZ, "SHBKZ 2
SUMS2 TYPE P, "Sonderumsatz 2
UMKZ3 LIKE LFC3-SHBKZ, "SHBKZ 3
SUMS3 TYPE P, "Sonderumsatz 3
UMKZ4 LIKE LFC3-SHBKZ, "SHBKZ 4
SUMS4 TYPE P, "Sonderumsatz 4
UMKZ5 LIKE LFC3-SHBKZ, "SHBKZ 5
SUMS5 TYPE P, "Sonderumsatz 5
UMKZ6 LIKE LFC3-SHBKZ, "SHBKZ 6
SUMS6 TYPE P, "Sonderumsatz 6
UMKZ7 LIKE LFC3-SHBKZ, "SHBKZ 7
SUMS7 TYPE P, "Sonderumsatz 7
UMKZ8 LIKE LFC3-SHBKZ, "SHBKZ 8
SUMS8 TYPE P, "Sonderumsatz 8
UMKZ9 LIKE LFC3-SHBKZ, "SHBKZ 9
SUMS9 TYPE P, "Sonderumsatz 9
UMKZ10 LIKE LFC3-SHBKZ, "SHBKZ 10
SUMS10 TYPE P, "Sonderumsatz 10
SONOB TYPE P, "Sonstige Umsatz-Kz
BABZG TYPE P, "Berechtigte Abzuege
UABZG TYPE P, "Unberechtigte Abzuege
KZINS TYPE P, "Zinszahlungen
KUMUM TYPE P, "Umsatz
KUMAG TYPE P, "Kum. Jahresausgleich
KREUEB TYPE P, "Kreditueberschreitung
AGOBLI TYPE P, "Gesamt-Obligo (absolut)
AGOBLI LIKE LFC1-UMSAV, "Gesamt-Obligo (absolut)
RGOBLI TYPE P, "Gesamt-Obligo (relativ)
LFTAGE(3) TYPE P, "Langfristige Überzugstage
MFTAGE(3) TYPE P, "Mittelfristige Überzugstage
KFTAGE(3) TYPE P, "Kurzfristige Überzugstage
END OF C.
---- 'C2'= Zwischenergebnisse, die aus Feldern des C-Segmentes ---
*---- berechnet werden. -
DATA: BEGIN OF C2 OCCURS 0,
BUKRS LIKE LFC1-BUKRS,
SALDO TYPE P, "Saldo
WEXOB TYPE P, "Wechsel-Obligo W,S,B
ANZOB TYPE P, "Anzahlungs-Obligo A
ZANFB TYPE P, "Zahlungs-Anforderung F
UMKZ1 LIKE LFC3-SHBKZ, "SHBKZ 1
SUMS1 TYPE P, "Sonderumsatz 1
UMKZ2 LIKE LFC3-SHBKZ, "SHBKZ 2
SUMS2 TYPE P, "Sonderumsatz 2
UMKZ3 LIKE LFC3-SHBKZ, "SHBKZ 3
SUMS3 TYPE P, "Sonderumsatz 3
UMKZ4 LIKE LFC3-SHBKZ, "SHBKZ 4
SUMS4 TYPE P, "Sonderumsatz 4
UMKZ5 LIKE LFC3-SHBKZ, "SHBKZ 5
SUMS5 TYPE P, "Sonderumsatz 5
UMKZ6 LIKE LFC3-SHBKZ, "SHBKZ 6
SUMS6 TYPE P, "Sonderumsatz 6
UMKZ7 LIKE LFC3-SHBKZ, "SHBKZ 7
SUMS7 TYPE P, "Sonderumsatz 7
UMKZ8 LIKE LFC3-SHBKZ, "SHBKZ 8
SUMS8 TYPE P, "Sonderumsatz 8
UMKZ9 LIKE LFC3-SHBKZ, "SHBKZ 9
SUMS9 TYPE P, "Sonderumsatz 9
UMKZ10 LIKE LFC3-SHBKZ, "SHBKZ 10
SUMS10 TYPE P, "Sonderumsatz 10
SONOB TYPE P, "Sonstige Umsatz-Kz
BABZG TYPE P, "Berechtigte Abzuege
UABZG TYPE P, "Unberechtigte Abzuege
KZINS TYPE P, "Zinszahlungen
KUMUM TYPE P, "Umsatz
KUMAG TYPE P, "Kum. Jahresausgleich
KREUEB TYPE P, "Kreditueberschreitung
AGOBLI TYPE P, "Gesamt-Obligo (absolut)
AGOBLI LIKE LFC1-UMSAV, "Gesamt-Obligo (absolut)
RGOBLI TYPE P, "Gesamt-Obligo (relativ)
LFTAGE(3) TYPE P, "Langfristige Überzugstage
MFTAGE(3) TYPE P, "Mittelfristige Überzugstage
KFTAGE(3) TYPE P, "Kurzfristige Überzugstage
ZVTYP(1) TYPE C, "Flag Skonto oder Nettozahler
ZVPER(6) TYPE C, "letze Zahlungsperiode
ZVVERZUG(8) TYPE P, "Durchschittliche Verzugst
END OF C2.
---- 'C3'= Zwischenergebnisse, die aus Feldern des C-Segmentes ---
*---- berechnet werden. -
DATA: BEGIN OF C3,
SALDO TYPE P, "Saldo
WEXOB TYPE P, "Wechsel-Obligo W,S,B
ANZOB TYPE P, "Anzahlungs-Obligo A
ZANFB TYPE P, "Zahlungs-Anforderung F
UMKZ1 LIKE LFC3-SHBKZ, "SHBKZ 1
SUMS1 TYPE P, "Sonderumsatz 1
UMKZ2 LIKE LFC3-SHBKZ, "SHBKZ 2
SUMS2 TYPE P, "Sonderumsatz 2
UMKZ3 LIKE LFC3-SHBKZ, "SHBKZ 3
SUMS3 TYPE P, "Sonderumsatz 3
UMKZ4 LIKE LFC3-SHBKZ, "SHBKZ 4
SUMS4 TYPE P, "Sonderumsatz 4
UMKZ5 LIKE LFC3-SHBKZ, "SHBKZ 5
SUMS5 TYPE P, "Sonderumsatz 5
UMKZ6 LIKE LFC3-SHBKZ, "SHBKZ 6
SUMS6 TYPE P, "Sonderumsatz 6
UMKZ7 LIKE LFC3-SHBKZ, "SHBKZ 7
SUMS7 TYPE P, "Sonderumsatz 7
UMKZ8 LIKE LFC3-SHBKZ, "SHBKZ 8
SUMS8 TYPE P, "Sonderumsatz 8
UMKZ9 LIKE LFC3-SHBKZ, "SHBKZ 9
SUMS9 TYPE P, "Sonderumsatz 9
UMKZ10 LIKE LFC3-SHBKZ, "SHBKZ 10
SUMS10 TYPE P, "Sonderumsatz 10
SONOB TYPE P, "Sonstige Umsatz-Kz
BABZG TYPE P, "Berechtigte Abzuege
UABZG TYPE P, "Unberechtigte Abzuege
KZINS TYPE P, "Zinszahlungen
KUMUM TYPE P, "Umsatz
KUMAG TYPE P, "Kum. Jahresausgleich
KREUEB TYPE P, "Kreditueberschreitung
AGOBLI TYPE P, "Gesamt-Obligo (absolut)
AGOBLI LIKE LFC1-UMSAV, "Gesamt-Obligo (absolut)
RGOBLI TYPE P, "Gesamt-Obligo (relativ)
LFTAGE(3) TYPE P, "Langfristige Überzugstage
MFTAGE(3) TYPE P, "Mittelfristige Überzugstage
KFTAGE(3) TYPE P, "Kurzfristige Überzugstage
ZVTYP(1) TYPE C, "Flag Skonto oder Nettozahler
ZVPER(6) TYPE C, "letze Zahlungsperiode
ZVVERZUG(8) TYPE P, "Durchschittliche Verzugst
END OF C3.
DATA: SHBETRAG LIKE BSEGA-DMSHB. "TYPE P.
*---- 'RTAB' = Rastertabelle fuer offene Posten -
DATA: BEGIN OF RTAB OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
"2 = Umsatzdaten
BUKRS LIKE BSIK-BUKRS,
GSBER LIKE BSIK-GSBER,
WAERS LIKE BSIK-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
SPERR TYPE P, "gesprrte Posten
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RTAB.
*---- 'RBUS' = Rastertabelle fuer Summen pro Sachbearbeiter -
*ATA: BEGIN OF RBUS OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
BUKRS LIKE BSIk-BUKRS,
GSBER LIKE BSIk-GSBER,
WAERS LIKE BSIk-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RBUS.
*---- 'RBUK' = Rastertabelle fuer Summen pro Buchungskreis -
DATA: BEGIN OF RBUK OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
"2 = Umsatzdaten
BUKRS LIKE BSIK-BUKRS,
GSBER LIKE BSIK-GSBER,
WAERS LIKE BSIK-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
SPERR TYPE P, "gesprrte Posten
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RBUK.
---- 'RSUM' = Rastertabelle pro Währung über alle Buchungskreise ---
DATA: BEGIN OF RSUM OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
BUKRS LIKE BSIk-BUKRS,
GSBER LIKE BSIk-GSBER,
WAERS LIKE BSIK-WAERS,
RAART TYPE C, "Rasterart
"1 = Netto-Faelligkeit
"2 = Skonto1-Faelligkeit
"3 = Zahlungseingang
"4 = Ueber-Faelligkeit
SPERR TYPE P, "gesperrte Posten
KUMUM TYPE P, "Umsatz
ANZAH TYPE P, "Anzahlungen
OPSUM TYPE P, "Offene Posten Summe
RAST1 TYPE P, "Rasterfeld 1
RAST2 TYPE P, "Rasterfeld 2
RAST3 TYPE P, "Rasterfeld 3
RAST4 TYPE P, "Rasterfeld 4
RAST5 TYPE P, "Rasterfeld 5
RAST6 TYPE P, "Rasterfeld 6
END OF RSUM.
*---- interne Tabelle für Periodenabgrenzung----
RANGES: BMONAT FOR RFPDO-DOPRBMON.
---- In die Felder RP01 bis RP05 werden dynamisch die von aussen ---
*---- eingegebenen Rasterpunkte uebertragen -
DATA: RP01(2) TYPE P, " 0
RP02(2) TYPE P, " 20
RP03(2) TYPE P, " 40
RP04(2) TYPE P, " 80
RP05(2) TYPE P, " 100
RP06(3) TYPE P, " 1
RP07(3) TYPE P, " 21
RP08(3) TYPE P, " 41
RP09(3) TYPE P, " 81
RP10(3) TYPE P. " 101
*---- In die Felder RC01 bis RC10 werden die Rasterpunkte in -
---- charakterform abgestellt. (fuer REPLACE-Funktion in Variabler -
*---- Ueberschrift) -
DATA: RC01(4) TYPE C, " 0
RC02(4) TYPE C, " 20
RC03(4) TYPE C, " 40
RC04(4) TYPE C, " 80
RC05(4) TYPE C, " 100
RC06(4) TYPE C, " 1
RC07(4) TYPE C, " 21
RC08(4) TYPE C, " 41
RC09(4) TYPE C, " 81
RC10(4) TYPE C. " 101
*---- Felder für Umsatzkennzeichen -
*---- für Ausweis der Sonderumsätze----
DATA: HUMKZ1 LIKE LFC3-SHBKZ,
HUMKZ2 LIKE LFC3-SHBKZ,
HUMKZ3 LIKE LFC3-SHBKZ,
HUMKZ4 LIKE LFC3-SHBKZ,
HUMKZ5 LIKE LFC3-SHBKZ,
HUMKZ6 LIKE LFC3-SHBKZ,
HUMKZ7 LIKE LFC3-SHBKZ,
HUMKZ8 LIKE LFC3-SHBKZ,
HUMKZ9 LIKE LFC3-SHBKZ,
HUMKZ10 LIKE LFC3-SHBKZ.
*---- GBZAEHL - In diesem Feld wird vermerkt, fuer wieviele Ge- -
*---- schaeftsbereiche ein OP-Raster ausgegeben wird. -
---- Wird das Raster nur fuer einen Geschaeftsbereich ge- -
*---- druckt, so entfaellt das Summen-Raster. -
DATA: GBZAEHL(3) TYPE P.
---- TOP-FLAG '1' = bei TOP-OF-PAGE Einzelpostenueberschrift ausg. --
*---- '2' = bei TOP-OF-PAGE Ueberschrift fuer Raster ausgeb. *
*---- '3' = bei TOP-OF-PAGE ULINE ausgeben. -
---- '4' = bei TOP-OF-PAGE Stammsatzueberschrift ausgeben --
DATA: TOP-FLAG(1) TYPE C.
*---- SEL-STAMM 'J' = Stammsatz wird ausgewertet *
*---- 'N' = Stammsatz wird nicht ausgewertet *
*---- SEL-POSTN 'J' = Stammsatz hat Posten gerastert *
*---- 'N' = Stammsatz hat keine Posten gerastert *
DATA: BEGIN OF SEL,
STAMM(1) TYPE C,
POSTN(1) TYPE C,
POST2(1) TYPE C,
END OF SEL.
*---- SATZART '1' = Stammdaten -
*---- '2' = Faelligkeitsraster -
*---- '3' = Einzelposten -
DATA: SATZART(1) TYPE C.
*---- RART = Erste ausgewaehlte Rasterart -
DATA: RART(1) TYPE C.
*---- TAGE = Tage nach denen die Posten sortiert sind -
DATA: TAGE(4) TYPE P,
*---- NTAGE = Tage fuer Netto-Faelligkeit -
NTAGE(4) TYPE P,
*---- STAGE = Tage fuer Skonto1-Faelligkeit -
STAGE(4) TYPE P,
*---- ATAGE = Alter der Belege -
ATAGE(4) TYPE P,
*---- UTAGE = Tage fuer Ueber-Faelligkeit -
UTAGE(4) TYPE P.
*---- RASTERUU dient zur Sortierung der Einzelposten. Die Posten -
*---- gemaess ihrer Rasterung die Werte '1' bis '6' -
DATA: RASTERUU(1) TYPE C.
*---- RAART Rasterart -
---- Die einzelnen Felder der Feldleiste werden bei SART-OF-SELECTION
*---- mit 1 oder 0 bestueckt. -
*ATA: BEGIN OF RAART,
NET(1) TYPE C, "X = ausgewaehlt, ' ' = nicht ausgewaehlt
SKT(1) TYPE C, "X = ausgewaehlt, ' ' = nicht ausgewaehlt
UEB(1) TYPE C, "X = ausgewaehlt, ' ' = nicht ausgewaehlt
END OF RAART.
DATA: BEGIN OF GB,
GSBER LIKE BSIK-GSBER,
WAERS LIKE BSIK-WAERS,
END OF GB.
*---- Variable Ueberschriften -
DATA: BEGIN OF VARUEB1,
FELD1(45) TYPE C,
FELD2(14) TYPE C,
FELD3(14) TYPE C,
FELD4(14) TYPE C,
FELD5(14) TYPE C,
FELD6(14) TYPE C,
FELD7(14) TYPE C,
END OF VARUEB1.
DATA: BEGIN OF VARUEB2,
FELD1(45) TYPE C,
FELD2(14) TYPE C,
FELD3(14) TYPE C,
FELD4(14) TYPE C,
FELD5(14) TYPE C,
FELD6(14) TYPE C,
FELD7(14) TYPE C,
END OF VARUEB2.
DATA: VARUEB3(132),
VARUEB4(132),
VARTXT1(40),
VARTXT(40) TYPE C.
*---- Variable für Ausgabe der Sonderumsätze----
DATA: SHBBEZ LIKE T074T-LTEXT.
DATA: ASUMS TYPE P. "
*---- Interne Tabelle für Bezeichnungen der SHBKZ----
DATA: BEGIN OF BEZSHB OCCURS 10,
SHBKZ LIKE T074T-SHBKZ,
LTEXT LIKE T074T-LTEXT,
END OF BEZSHB.
*---- Interne Tabelle für Zwischenspeicherung -
DATA: BEGIN OF BLKEY,
BUKRS LIKE BSIK-BUKRS,
BELNR LIKE BSIK-BELNR,
GJAHR LIKE BSIK-GJAHR,
BUZEI LIKE BSIK-BUZEI,
END OF BLKEY.
DATA: BEGIN OF RTAGE,
NTAGE LIKE NTAGE,
STAGE LIKE STAGE,
ATAGE LIKE ATAGE,
UTAGE LIKE UTAGE,
END OF RTAGE.
DATA: BEGIN OF HBSIK OCCURS 10.
INCLUDE STRUCTURE BSIK.
INCLUDE STRUCTURE BSEGA.
INCLUDE STRUCTURE RTAGE.
DATA: END OF HBSIK.
DATA: BEGIN OF REFBL OCCURS 10.
INCLUDE STRUCTURE BLKEY.
INCLUDE STRUCTURE RTAGE.
DATA: END OF REFBL.
DATA: BEGIN OF HLFB1 OCCURS 10.
INCLUDE STRUCTURE LFB1.
DATA: END OF HLFB1.
DATA: BEGIN OF HT001 OCCURS 10.
INCLUDE STRUCTURE T001.
DATA: END OF HT001.
*---- Interne Tabelle für Ausgabe der Obligos -
DATA: BEGIN OF AOBLIGO OCCURS 12,
OBART TYPE C, "Flag für Obligoart 1 = Kontokorrent
" 2 = SHBKZ
" 3 = sonstige SHB
SHBKZ LIKE T074T-SHBKZ, "SHB-Kennzeichen
LTEXT LIKE T074T-LTEXT, "Bezeichnung
OBLIG TYPE P, "Obligobetrag
END OF AOBLIGO.
*---- Declarationen für Accessibility /ALV GRID -
data: ACC_MODE type c.
Data: UEBTEXT(22) type c.
Data: UEKTEXT(15) type c.
Data: TITTEXT(100) type c.
Data: DATTEXT(10) type c.
DATA: BEGIN OF RTAB_ALV OCCURS 30,
SORTK(1) TYPE C, "0 = Summe Gesber
"1 = Summe aller Gesber
"2 = Umsatzdaten
BUKRS LIKE BSIk-BUKRS,
lifnr LIKE LFA1-lifnr,
busab like lfb1-busab,
SORTL LIKE lfA1-SORTL,
LAND1 LIKE lfA1-LAND1,
GSBER LIKE BSIk-GSBER,
WAERS LIKE BSIk-WAERS,
hwaer like rf140-hwaer,
RAART like RF140-RAART, "Rasterart
shkzg like bsik-shkzg,
XGUTS TYPE C, "Gutschrift
KUMUM LIKE RF140-KUMUMHW, "Umsatz
ANZAH like rf140-anzbthw, "Anzahlungen
OPSUM like RF140-gsaldd, "Offene Posten Summe
RAST1 like RF140-rast1, "Rasterfeld 1
RAST2 like RF140-rast2, "Rasterfeld 2
RAST3 like RF140-rast3, "Rasterfeld 3
RAST4 like RF140-rast4, "Rasterfeld 4
RAST5 like RF140-rast5, "Rasterfeld 5
RAST6 like RF140-rast6, "Rasterfeld 6
END OF RTAB_ALV.
*"General Data
TYPE-POOLS: SLIS.
*DATA: BEGIN OF GT_OUTTAB OCCURS 0.
INCLUDE STRUCTURE rtab_alv.
*DATA: END OF GT_OUTTAB.
Data: GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
G_EXIT_CAUSED_BY_CALLER,
GS_EXIT_CAUSED_BY_USER TYPE SLIS_EXIT_BY_USER,
G_REPID LIKE SY-REPID,
G_GRID_TITLE TYPE LVC_TITLE.
*"Callback
*Data: GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
G_STATUS_SET TYPE SLIS_FORMNAME VALUE 'PF_STATUS_SET',
Data: G_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
G_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
G_TOP_OF_LIST TYPE SLIS_FORMNAME VALUE 'TOP_OF_LIST',
G_END_OF_LIST TYPE SLIS_FORMNAME VALUE 'END_OF_LIST'.
*"Variants
DATA: GS_VARIANT LIKE DISVARIANT,
G_SAVE.
Global structure of list
fieldcatalog
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
sort
*DATA: GT_SORT TYPE SLIS_T_SORTINFO_ALV.
events
*DATA: GT_EVENTS TYPE SLIS_T_EVENT.
*----- Structure for specific color settings -
*DATA: COL_TAB_T TYPE SLIS_T_SPECIALCOL_ALV,
COL_TAB TYPE SLIS_SPECIALCOL_ALV.
DATA: G_TABNAME TYPE SLIS_TABNAME VALUE 'RTAB_ALV'.
print
*DATA: GS_PRINT TYPE SLIS_PRINT_ALV.
*---- FIELD-GROUPS -
FIELD-GROUPS:
HEADER,
STAMMDATEN,
OP-RASTER,
EINZELPOSTEN.
INSERT
LFB1-BUKRS " Buchungskreis
lfB1-BUSAB " Sachbearbeiter
LFA1-LIFNR " Kontonummer
SATZART " Satzart
RTAB-SORTK " Sortkz fuer Tabelle RTAB
" '0' = normale Eintraege
" '1' = Summeneintraege
GB " Geschaeftsbereich
" - GB-GSBER
" - GB-WAERS
RASTERUU " Kennzeichen fuer Detailposten bzw Raster
ab hier nur fuer Einzelposten -
TAGE " Rastertage fuer Detailposten
BSIK-UMSKZ " Umsatzkennzeichen
BSIK-BLART " Belegart
BSIK-ZUONR " Zuordnungsnummer
BSIK-BELNR " Belegnummer
BSIK-BUZEI " Belegzeile
INTO HEADER.
INSERT
Addressdaten
ADRS-LINE0 " 1. Zeile Adressenaufbereitung
ADRS-LINE1 " 2. " "
ADRS-LINE2 " 3. " "
ADRS-LINE3 " 4. " "
ADRS-LINE4 " 5. " "
ADRS-LINE5 " 6. " "
ADRS-LINE6 " 7. " "
ADRS-LINE7 " 8. " "
ADRS-LINE8 " 9. " "
ADRS-LINE9 " 10." "
Umsatzdaten
C-KUMUM " Umsatz
C-BABZG " Berechtigt. Abzuege
C-UABZG " Unberechtigt. Abzuege
C-KZINS " Zinszahlungen
C-KUMAG " Kum. Jahresausgleich
Obligos
C-SALDO " Saldo ohne SHB-Vorgänge
C-UMKZ1 "SHBKZ 1
C-SUMS1 "Sonderumsatz 1
C-UMKZ2 "SHBKZ 2
C-SUMS2 "Sonderumsatz 2
C-UMKZ3 "SHBKZ 3
C-SUMS3 "Sonderumsatz 3
C-UMKZ4 "SHBKZ 4
C-SUMS4 "Sonderumsatz 4
C-UMKZ5 "SHBKZ 5
C-SUMS5 "Sonderumsatz 5
C-UMKZ6 "SHBKZ 6
C-SUMS6 "Sonderumsatz 6
C-UMKZ7 "SHBKZ 7
C-SUMS7 "Sonderumsatz 7
C-UMKZ8 "SHBKZ 8
C-SUMS8 "Sonderumsatz 8
C-UMKZ9 "SHBKZ 9
C-SUMS9 "Sonderumsatz 9
C-UMKZ10 "SHBKZ 10
C-SUMS10 "Sonderumsatz 10
C-SONOB " Sonst. Obligen
Limits
C-AGOBLI " Absolutes Gesamtobligo
Zahlungdaten
LFB1-ZTERM "Zahlungsbedingung
LFB1-ZAHLS "Sperrschlüssel für Zahlung
LFB1-ZWELS "Zahlwege
LFB1-XVERR "Zahlungsverrechnung
LFB1-WEBTR "Wechsellimit
LFB1-BUSAB " Sachbearbeiter
lfa1-sortl
lfa1-land1
INTO STAMMDATEN.
INSERT
RTAB-RAART "Rasterart
RTAB-SPERR "gesperrte Posten
RTAB-KUMUM "Umsatz
RTAB-ANZAH "Anzahlungen
RTAB-OPSUM "Offene Posten Summe
RTAB-RAST1 "Rasterfeld 1
RTAB-RAST2 "Rasterfeld 2
RTAB-RAST3 "Rasterfeld 3
RTAB-RAST4 "Rasterfeld 4
RTAB-RAST5 "Rasterfeld 5
RTAB-RAST6 "Rasterfeld 6
INTO OP-RASTER.
INSERT
BSIK-BUDAT " Buchungsdatum
BSIK-BLDAT " Belegdatum
BSIK-CPUDT " CPU-Datum
BKPF-USNAM " User-ID
BSIK-WAERS " Wahrungsschluessel
BSEGA-NETDT " Nettofaelligkeitsdatum
FAEDE-NETDT " Nettofaelligkeitsdatum
BSIK-ZFBDT " Zahlungsfristen-Basisdatum
BSIK-BSCHL " Buchungsschluessel
BSIK-ZLSCH " Zahlungsschluessel
BSIK-MANST " Mahnstufe
SHBETRAG " Hauswaehrungsbetrag
BSEGA-DMSHB " Hauswaehrungsbetrag
BSEGA-WRSHB " Fremwaehrungsbetrag
INTO EINZELPOSTEN.
BEGIN_OF_BLOCK 1.
*ELECT-OPTIONS:
GESBER FOR BSIK-GSBER.
PARAMETERS:
MONAT LIKE RFPDO-DOPRBMON.
SELECT-OPTIONS:
KKSALDO2 FOR RFSDO-KOPRSAL2, "Saldovortrag
AGOBLIG2 FOR RFSDO-KOPRAGO2. "Absolutes Obligo
RGOBLIGO FOR RFSDO-DOPRRGOB. "Relatives Obligo
SELECT-OPTIONS:
LAND FOR LFA1-LAND1,
KONTENGR FOR LFA1-KTOKK,
SACHBEAR FOR LFB1-BUSAB,
AKONTS FOR LFB1-AKONT,
AKONTP FOR BSIK-HKONT.
SELECT-OPTIONS:
BUDAT FOR BSIK-BUDAT,
BLDAT FOR BSIK-BLDAT,
NETDT FOR BSEGA-NETDT.
PARAMETERS: N_BELEGE LIKE RFPDO-BPETNBEL
DEFAULT 'X', "Normale Belege.
STAT_BLG LIKE RFPDO-BPETSBEL. "Statistische Belege
END_OF_BLOCK 1.
*ELECT-OPTIONS:
BERABZU1 FOR LFC1-BABZG,
UNBABZU1 FOR LFC1-UABZG,
ZINSE1 FOR LFC1-KZINS,
JHRAUSG1 FOR LFC1-KUMAG.
BERABZUG FOR BEABZUG NO-DISPLAY, "Berechtigter Abzug
UNBABZUG FOR UBABZUG NO-DISPLAY, "Unberechtigter Abzug
ZINSEN FOR KUMZINS NO-DISPLAY, "Kumulierter Zins
JHRAUSGL FOR JAHRAUG NO-DISPLAY. "Kumulierter Jahresausgl.
BEGIN_OF_BLOCK 2.
PARAMETERS:
SORTART LIKE RFPDO1-KOPRSOAR DEFAULT '1', "Doku
VERDICHT LIKE RFPDO1-KOPRVERD DEFAULT '1', "Doku
RASTVERD LIKE RFPDO1-KOPRRAST DEFAULT '0', "Doku
KONZVERS LIKE RFPDO-DOPOKONZ, "Konzernversion
XBUKRDAT LIKE RFPDO3-ALLGBUKD DEFAULT 0, "Bukr.daten
KAUSGABE like rfpdo3-ALLGKAOR.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(30) TEXT-030.
PARAMETERS: RART-NET LIKE RFPDO-DOPRRNET DEFAULT 'X'.
SELECTION-SCREEN COMMENT 33(01) TEXT-028.
PARAMETERS: RART-SKT LIKE RFPDO-DOPRRSKT DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(01) TEXT-028.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RART-ALT LIKE RFPDO1-KOPRRALT DEFAULT 'X'.
SELECTION-SCREEN COMMENT 03(28) TEXT-031.
SELECTION-SCREEN POSITION POS_HIGH.
PARAMETERS RBLDAT LIKE RFPDO2-KORD10BD.
SELECTION-SCREEN COMMENT 61(12) TEXT-032.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN COMMENT 37(01) TEXT-028.
PARAMETERS: RART-UEB LIKE RFPDO-DOPRRUEB DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(31) TEXT-026.
PARAMETERS: RASTBIS1 LIKE RFPDO1-ALLGROGR DEFAULT '000'.
SELECTION-SCREEN COMMENT 35(02) TEXT-027.
PARAMETERS: RASTBIS2 LIKE RFPDO1-ALLGROGR DEFAULT '020'.
SELECTION-SCREEN COMMENT 41(02) TEXT-027.
PARAMETERS: RASTBIS3 LIKE RFPDO1-ALLGROGR DEFAULT '040'.
SELECTION-SCREEN COMMENT 47(02) TEXT-027.
PARAMETERS: RASTBIS4 LIKE RFPDO1-ALLGROGR DEFAULT '080'.
SELECTION-SCREEN COMMENT 53(02) TEXT-027.
PARAMETERS: RASTBIS5 LIKE RFPDO1-ALLGROGR DEFAULT '100'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(31) TEXT-029.
PARAMETERS: FAKTOR LIKE RFPDO-DOPRFAKT DEFAULT '0'.
SELECTION-SCREEN COMMENT 35(1) TEXT-028.
PARAMETERS: STELLEN LIKE RFPDO-DOPRFAKT DEFAULT '0'.
SELECTION-SCREEN END OF LINE.
PARAMETERS: PZUOR LIKE RFPDO2-DOPRZUOR.
PARAMETERS: UMSATZKZ LIKE RFPDO1-DOPRSHBO. "DEFAULT 'WSABIMVD'.
PARAMETERS:
TITLE LIKE RFPDO1-ALLGLINE,
LISTSEP LIKE RFPDO-ALLGLSEP,
MIKFICHE LIKE RFPDO-ALLGMIKF.
PARAMETERS:
P_LVAR LIKE Gs_VARIANT-VARIANT DEFAULT SPACE modif id 508.
END_OF_BLOCK 2.
AT SELECTION-SCREEN OUTPUT.
if acc_mode is initial.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = '508'.
SCREEN-active = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
endif.
AT SELECTION-SCREEN ON AKONTS.
Konvertierung der Kontonummer
LOOP AT AKONTS.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTS-LOW AKONTS-LOW.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTS-HIGH AKONTS-HIGH.
MODIFY AKONTS.
ENDLOOP.
AT SELECTION-SCREEN ON AKONTP.
Konvertierung der Kontonummer
LOOP AT AKONTP.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTP-LOW AKONTP-LOW.
PERFORM ALPHAFORMAT(SAPFS000)
USING AKONTP-HIGH AKONTP-HIGH.
MODIFY AKONTP.
ENDLOOP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_LVAR.
Gs_VARIANT-REPORT = SY-REPID.
Gs_VARIANT-VARIANT = P_LVAR.
PERFORM F4_FOR_S_LVAR USING Gs_VARIANT.
P_LVAR = Gs_VARIANT-VARIANT.
AT SELECTION-SCREEN.
IF NOT RASTBIS5 IS INITIAL.
IF RASTBIS5 GT RASTBIS4
AND RASTBIS4 GT RASTBIS3
AND RASTBIS3 GT RASTBIS2
AND RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
IF NOT RASTBIS4 IS INITIAL.
IF RASTBIS4 GT RASTBIS3
AND RASTBIS3 GT RASTBIS2
AND RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
IF NOT RASTBIS3 IS INITIAL.
IF RASTBIS3 GT RASTBIS2
AND RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
ENDIF.
ELSE.
IF NOT RASTBIS2 IS INITIAL.
IF RASTBIS2 GT RASTBIS1.
ELSE.
MESSAGE E379.
EHi Laxman,
I have checked the program and found out following:
the field "acc_mode" which gets populated by FM "GET_ACCESSIBILITY_MODE".
If this field is initial, then normal list gets displayed and
If this field has value, then ALV grid gets displayed.
regards,
Dharitree -
Please need help converting AS2 to AS3 code
Hi, I want to convert an AS2 code to AS3. Someone can tell
what is wrong. (it is about a speed effect) - Thanks a lot.
mport flash.filters.BlurFilter;
import fl.transitions.Tween;
import fl.transitions.easing.*;
var duration:Number = 15;
var t1:Tween = new Tween(mcToTween1, "_x", Elastic.easeIn,
133, 367, duration, 0);
var t2:Tween = new Tween(mcToTween1, "blur", Elastic.easeIn,
0, 0, 1, true);
t1.onMotionChanged = function() {
oldx = x;
oldy = y;
x = mcToTween1._x;
y = mcToTween1._y;
speedx = Math.round(Math.abs((x-oldx)));
speedy = Math.round(Math.abs((y-oldy)));
mcToTween1.filters = [new BlurFilter(speedx*2, speedy*2, 1)];
trace(speedx);
t1.onMotionFinished = function() {
t1.yoyo();
};use:
MovieClip(parent.parent.parent).rdcmndPause=1;
this.addEventListener(KeyboardEvent.KEY_DOWN,keydownF);
function keydownF(e:KeyboardEvent):void{
fscommand("KEYPRESSED", e.keyCode);
if(e.keyCode==32){
MovieClip(parent.parent.parent).rdcmndNextSlide=1; -
I want to convert my static wordpress theme to responsive
i am using a static theme for my blog http://tnpscexamnews.in, i want to convert the existing theme into responsive using dreamweaver. i need some tutorials about how to create responsive css for existing theme using dreamweaver.
I had a quick look at the existing website's html code, and the code isn't that bad - a RDW retrofit could be made to work relatively quickly for a quick RDW make-over.
But you will have to hand code it - that would be the most efficient.
Steps:
1) make the current fixed design fluid by setting a min-width and max-width on the container div. Then apply a width of 90% for some margins on the sides. While you are at it, clean up some of the html. For example that wrapper div isn't doing much.
2) remove the 990px width for the header. Add a clearfix to contain the floats in the header.
3) Add a surrounding main content container for both the main content and sidebar divs. Add clearfix.
4) convert the column widths to percentages. (target/context *100) So for the sidebar: 328/990 *100 gives you the width in percentage. Do the same for the main content container. You now have fluid columns, and a design that is responsive up to a point.
5) do the same for the footer columns.
7) Next, set up two media query breakpoints: one for tablets, one for desktop screens. Move the current desktop layout code in the desktop media query part. The first media query breakpoint is not a breakpoint at all, and you should start with the mobile css without adding a media query. Hide content you do not need for the initial mobile setup. Then display in the media queries whatever you need at the tablet and desktop level.
8) fix stuff that breaks. Test, test, and test.
This type of retrofitting is quite controversial, but it can be done quickly IF you know what you are doing. I have seen an article about this topic in "the responsive web design handbook 2014" which is out now (page 78 and on). I would get that bookazine.
And play with the inspector in Chrome/Firefox to test stuff. Not all sites can be retrofitted, but I did a quick test, and had a working fluid design for your home page in less than two minutes.
Good luck! -
Hello
My English ability is ver poor sorry
I want to read pdf and display in web page (use jsp)
I have two problem
first, read pdf by html (not just text, jpedal is good)
sencond, save image(jpedal can do)
but I can't know image position....
anyway, I want to convert pdf to html
plz recommend good library.codingMonkey wrote:
DanCrintea wrote:
HTML to PDF with Java, using OpenOffice.org - example here: [http://www.dancrintea.ro/html-to-pdf/|http://www.dancrintea.ro/html-to-pdf/]
You can use OpenOffice.org, running as a server and command it remotely for document convertion.
Besides HTML to PDF, there are also possible other convertions:
doc --> pdf, html, txt, rtf
xls --> pdf, html, csv
ppt --> pdf, swf
Code example:
import officetools.OfficeFile; // this is my tools package
FileInputStream fis = new FileInputStream(new File("c:/test.html"));
FileOutputStream fos = new FileOutputStream(new File("c:/test.pdf"));
// suppose OpenOffice.org runs on localhost, port 8100
OfficeFile f = new OfficeFile(fis,"localhost","8100", true);
f.convert(fos,"pdf");
-----------------------------------------------------------------------------------------------------------------------------------------Methinks someone is close to getting their account blocked for resurrecting hordes of zombies.Indeed. Abuse already reported -
Muse CC thinks that ALL of my assets have been modified and wants to "convert" my site.
I opened up my muse site and somehow Muse CC thinks that ALL of my assets have been modified and wants to "convert" my site. It makes me a bit worried.
Here's what I've done since opening the site without a problem:
I used the in-browser editing feature to change simple numbers on a single page - the home page - I got the regular notice to review and update - that worked with no problems.
I have added several Muse-Themes widgets/templates/tools
I've had a computer crash that required a hard re-boot to correct, Muse and this site were running at the time. (now that I think about it, this might be the problem)
I don't recall whether Muse CC has updated in the last week (since it worked correctly for me)
I run anti-malware software and virus protection - both of which run in realtime scanning internet connection, file downloads, etc.
Can someone assure me that everything is OK - that sometimes this happens?
My next step as I leave here is to login to my site and check file sizes to see if there's a significant difference...yes, I'm worried about viruses - I have great software but all software can be overcome by determined (and annoying) people.
thanks for your attention to this and hopefully everything is just fine if a bit glitchy. I can work with glitchy :-)Thank you Akshay for replying so quickly. Lots of work to do then on my part.
Is there a list of CC apps that have been updated to their 2014 versions, so that I can check that I have all the updates?
Many thanks,
David Perkins
(Brighton, UK) -
i have pdf file with content along with background picture ... I want to convert the same pdf to .epub how can i???
If you're using Fluid Grid Layouts, none of these methods will work. I think the very best you can do is determine the min-height required for desktops & tablets. Mobile devices don't need min-height because those divisions will stack on top of each other.
To illustrate with a working example,
http://alt-web.com/FluidGrid/Fluid2.html
The relevant CSS code:
/* Special Rules for Tablets */
@media only screen and (min-width: 481px) {
.gridContainer >div {min-height: 255px;}
/* Special Rules for Desktops */
@media only screen and (min-width: 1025px) {
.gridContainer >div {min-height: 325px;}
Nancy O. -
I want to convert a movie that I've created in iMovie from PAL to NTSC.
I've created a large movie using PAL but now want to convert it to NTSC to send to my family in Canada. It took ages to create. Is there an easy way of doing the conversion? I don't want to have to do it all again.
Hi
A. Using iMovie'08 to 11 - Will not give 100% result - as You want interlaced SD-Video = NTSC
B. Converting from PAL to NTSC - is Never 100% loss free - but You lose a bit
I use iMovie HD6 or FinalCut - as they can deliver 100% over to program that converts.
• iMovie and iDVD can convert - BUT RESULT WILL BE Very POOOOR.
My notes on How I do it
PAL to NTSC or NTSC to PAL
A. Copying commercial DVDs - No Not possibly at all - Not even legal to discuss.
B. Home made DVDs (DVDs without copy protection)
C. Movies from iMovie or FinalCut
• Save as full quality QuickTime .mov and convert this with JES_Deinterlacer (free on Internet)
NTSC ---> PAL.
• Most often not necessary - Most stand alone PAL DVD-players playback NTSC
(if TV is old in BL/W)
PAL ---> NTSC.
• If played on Mac - not necessary AT ALL
• If on NTSC DVD-player - CONVERSION IS NEEDED - nearly no Stand alone NTSC-DVD-players
playback PAL at all.
To do this You need to convert the PAL DVD to streaming.DV or full quality QuickTime .mov
• I use Roxio Toast™ to do this (There are no free converter)
• JES_Deinterlacer (free on Internet) to convert to NTSC
• Set up an NTSC project (29.97fps or 30) in iDVD and import then burn
I burn to
• Verbatim DVD-R
• Set down burn speed in iDVD to x1 or x4 recommended by many
• Secure a minimum of 25Gb free space on internal boot hard disk before burning (IMPORTANT)
PAL is 25 fps and an analog TV standard of 625 lines
NTSC is 29.97 fps and 520 lines
NTSC (29.97fps) 520 lines - about 640x480 pixels (square) 720x480 rectangular (narrow) pixels
PAL (25 fps) 625 lines - about 768x576 pixels (square) 720x576 rectangular (narrow) pixels
to use a photo 702x480 resp 576 then add 9 pixels on each side to add together as 720
If iDVD hangs on PAL or NTSC.
Bengt W wrote
Deleting iDVD pref. file - should return You into NTSC mode.
Yes iDVD can switch to PAL - BUT as You see with a rather lousy result.
a. Need to convert to PAL - most often not - Most PAL-player can playback NTSC
and on a fairly new TV in color. (old TV in Bl/W)
(Other way around - from PAL to NTSC most often a must - few NTSC-player can use PAL)
b. IF MUST - then use JES_Deinterlacer to do this conversion - so much better and free.
My list on this (or rather PAL --> NTSC - just think the other way around)
I have to send it overseas
That too can be a problem. As USA = NTSC = 29.97fps and EU = PAL = 25fps.
DO Not let iMovie or iDVD do this conversion from one to the other - Result will be Very
BAD
I save the movie as a full quality QuickTime .mov file then I use JES_Deinterlacer to do the conversion - then I cont. in iMovie or iDVD with project set accordingly.
JES_Deinterlacer is free on Internet and there are Pro applications but not that much better and costs are astronomical.
PAL-DVDs - don't play in US
NTSC-DVDs - usually plays well in EU
All plays well on a Mac - What ever.
Allosaurus writes
Thank you SDMacuser. I dumped all the plist icons with no result, and was getting pretty plist off when it occurred to me to delete all the previous dvd.proj files. Bingo. That did the trick. So thank you for all your help and the additional information you provided.
Yours Bengt W -
Want to convert tif image file into jpg image file , pls help me
hey coders, i want to convert a tif image file into a jpg image file , can u all help in this
In it's simplest form, it's two lines of code.
BufferedImage bi = ImageIO.read(/*the tif file*/);
ImageIO.write(bi,"jpeg",/*output file*/);Though, you need to install [JAI-ImageIO|https://jai-imageio.dev.java.net/binary-builds.html] read the tif file into a BufferedImage. -
I have the CS5 Master Collection for Windows, but want to convert my license to a Mac.
I have the CS5 Master Collection for Windows, but want to convert my license to a Mac. I already have the CS5 Suite installed on the Mac. What do I need to do from here? I tried reading up a little bit on this and saw some people said in order to do this you would also need to upgrade your product version. Please tell me this is not the case, as that would be the dumbest and most frustrating customer service move ever to already faithful Adobe purchasers...
Thanks for any help you can give!in order to do this you would also need to upgrade your product version. Please tell me this is not the case, as that would be the dumbest and most frustrating customer service move ever to already faithful Adobe purchasers...
Unfortunately, upgrading to CS6 or joining the Cloud are your only options.
Platform swapping (Win to Mac and vIce versa) is only available to CS6 owners.
Order product | Platform, language swap
Maybe you are looking for
-
Can I control two Macs with one keyboard & mouse simultaneously?
I'm presently the operator and head audio tech for a major Off-Broadway show. I'm running the show on Ableton Live 6 through a Mac Mini, using a MOTU 828mkIII as the Firewire audio interface to the console. "Show control" is basically straight music
-
EP6 monitoring in Solution Manager 4.0
I just installed Solution Manager 4.0 and try to setup monitoring for our EP6 SP15. Currently I have ran the registration from Visual Admin on Portal, in RZ21 of the solution manager I can see the portal server as remote agent, in RZ20 under "J2EE en
-
I cannot find the software and need to put it on a new computer. How do I do this? I do not remember where the software is yet it is on my computer along with Photoshop CS6 extended. I have that disk but cant find anything else.
-
How to assign addEventListener to 52 Buttons?!
Hi there! I am not an expert in Flash and my problem might looks silly. But anyway, my problem is that, I have 52 Button instances on Scene 1 as bellow: B1 , B2 , B3 , ... , B52 and I want to assign seperated actions for each of them. The way I curr
-
Error 2738 installing iTunes to PC
can't find any info on what this is and how to remediate - any clues? thx