Want to create a 10 minute "blank" video, can do with QT Pro?

Hello-
I'd like to create a 10 minute blank (black background, no audio) video that I can use as a title backdrop video in iMovie 08. Someone suggested QT Pro is able to do this. Is this correct? Thank you for your feedback!

I can make a 10 minute "video" (no audio) that would be only 20KB's using QuickTime Pro.
Create an all black image file (sized to your dimensions used in your project). It could be as small as a 2X2 pixel JPEG file but you would have to adjust those dimensions after import. that would be just a few bytes of data.
Open this new image file using QuickTime Pro, select all and "copy".
Find (trim if needed) a 10 minute video (using the appropriate frame rate for your project), select all and then use "Add to Selection & Scale" from the edit menu.
Open the Movie Properties window of this new file, highlight your tiny all black video track and "Extract".
Save As to make your self contained 10 minute all black video track.

Similar Messages

I want to create a 10 minute track combining 3 songs then export as an m03 file. any help would be appreciated.

I want to create a 10 minute track combining 3 songs then export as an mp3 file. any help would be appreciated.

Pull the 3 songs into GB's timeline (the big gray area), they will appear on 3 different tracks (unless they are DRM protected songs from the iTunes Store.) You can push them around, cut them, etc. When you're finished, use the "Share" menu to send them to iTunes or save them to your disk, make sure you check the "compress" box and pick mp3 as the compression method.

Want to create an oval vignette in photoshop elements 10 with transparent background for printing w

I am fairly new to PSE and I want to create an oval vignette in Photoshop Elements 10 with transparent background for printing on white paper using MS Publisher. Using the white background on inverse selection makes a slight line impression and either it should have a defined "frame" or nothing.
Appreciate any guidance.

Try with the Elliptical marquee tool:
On the tool's option bar set feather 25-40 px (experiment)
Drag out the Ellipse to embrace the object
Go to Layer>new>layer via copy, or CTRL+J
Your selection should fade out as a vignette and be surrounded by transparency
Save this layer via File>save for web, select PNG-24, and tick "Transparency"

Want to create an add-in/webpart that can enable comments for each day in TimeSheet

Hi,
Want to create an add-in/webpart that can enable comments for each day in timesheet.
I need help how can I achieve that programmatically.
Regards,
Mehar

Hi,
I already developed this kind of customization. The system offered the possibility to clic on a cell (Project Center, or My Task, or Timesheet), to input a value to store in a custom field, or in a database.
After clicking, a Popup with different textbox, etc...is displayed: it is possible to put values, comments, or whatever.
The benefits is that with this method, you don't have to redevelop the complete timesheet grid, which would be really complex.
Instead of that, you develop a part of javascript code, which displays a popup containing asp.net code. From the aspx page, you can make what you want: modifying the value of an task/assignment customfield for exemple.
To start, you can search for the Project Server 2010 SDK, Customize Project Center: it would be a good start point.
In case of big difficulty, ask again here, and we could get in touch to give more explanations.
Hope it helps,
Sylvain

I'm trying to multi-track using an m-audio device, I can record my guitar fine. However, I want to create a new track so I can record an acoustic tambourine over the top. Instead it records the original guitar as well as tambourine? its really annoying

I'm trying to multi-track using an m-audio device, I can record my guitar fine. However, I want to create a new track so I can record an acoustic tambourine over the top. Instead it records the original guitar as well as the tambourine coming out with a really distorted sound. I've managed to record over the top of a guitar before and add diferent riffs and sounds but I've tried all of the settings but its still not working. Basically I want to record different tracks without it recording my previous guitar riffs as well. Help would really be appreciated.

Ah that was it, thanks a lot common sense really but thanks for the help

How many minutes of video can I record on my ipad mini 16gb?

How many minutes of video can I record on my ipad mini 16gb?

It all depends on how much room you have available.
I shot a 12 second video that's about 25 megs.
so guestimate 60 seconds = 150 megs or so.

I forgot my security questions and i don't want to create a new apple id what can I do?

I forgot my security questions and don;t want to create a new apple id what can I do?

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(98589)

Converting Nokia N95 MP4 videos for use with Premiere Pro?

What would you say the best way to convert Nokia N95 MP4 videos for use with Premiere Pro is?

Sheesh.
This "
How do I convert my files?" entry at the PPro Wiki might offer some insight.

I want to create an intelligent file to show all pictures with 3 stars or more. Trying this, I don't know the character of the stars to fill in the respective box ??

I want to create an intelligent file in my finder to show all pictures with 3 stars or more. Trying this, I don't know the character of the stars to fill in the respective box ??
Thanks for your help.

Take a look here: http://hints.macworld.com/article.php?story=20110314131100623
One of the comments suggests you can't use greater than or less than with the star rating in Finder.
You might try a Raw Query with the kMDItemStarRating.
In the criteria popup menu, select Other, then find the Raw Query entry.
You might have to play around with the syntax, but try "kMDItemStarRating >= 3"
Take a look here for query syntax: https://developer.apple.com/library/mac/ipad/#documentation/Carbon/Conceptual/Sp otlightQuery/Concepts/QueryFormat.html#//apple_ref/doc/uid/TP40001849-CJBEJBHH

Using two T lists i want to create a UI, from which user can make selection

I want to create a UI in forms 6i, wherein there will be two T lists on the same canvas. I'll populate the left one from the record group and then make selections to the right one using four buttons in between.
I'm using the add_list_element, delete_list_element, get_list_element_label, get_list_element_value built ins to do that. But it is not working properly. Giving a lot of forms errors.
The same thing can be done in JDeveloper using a shuttle bean.
An example of the UI that i want to construct :
The kind of UI that i'm talking can be seen when we construct a new form manually, then we goto data block wizard. There we browse for a table and the wizard gives the list of the columns for that table, from this list selections can be done using the four buttons in the same way that i intend my form to do. This is the kind of UI i want to develop.
I'm very new to development in forms. I'm sure you people at OTN will help me.
Thanks,
Abhishek.

Hi Abhishek
What is happening by these
Copy(v_value, p_tlist_into); and
...This commans set list item value (list selection).
The most simple way to move all elements between lists is to populate the target list from record group, and the to clear the source list. The lack of the given method - order of elements will be same, as in group.
PROCEDURE Move_All_Elements (p_tlist_from VARCHAR2, p_tlist_into VARCHAR2) is
v_value VARCHAR2(100);
v_label VARCHAR2(100);
v_index_from NUMBER;
v_index_into NUMBER;
v_count_from NUMBER; -- Count elements of tlist_out
BEGIN
--v_index_from := Get_List_element_count(p_tlist_from);
-- Get_List_element_count never return zero!
v_index_from := Get_List_Current_Index(p_tlist_from);
if v_index_from = 0 then -- The source list is enpty
--fnd_message.debug('elements=0, so return');pause;
RETURN;
end if;
--v_index_into := Get_List_element_count(p_tlist_into);
v_index_into := Get_List_Current_Index(p_tlist_into);
if v_index_into = 0 then -- The target list contant only DEFAULT value
--fnd_message.debug('no elements, so clearing the list');pause;
clear_list(p_tlist_into);
end if;
v_count_from := Get_List_element_count(p_tlist_from);
FOR i IN 1..v_count_from
LOOP
v_label := Get_List_Element_Label(p_tlist_from, i);
v_value := Get_List_Element_Value(p_tlist_from, i);
--Add_List_Element(p_tlist_into, v_index_into, v_label, v_value);
Add_List_Element(p_tlist_into, v_index_into+i, v_label, v_value);
-- The commands are lower in a loop are not necessary.
-- The commands after the loop make too most.
--Copy(v_value, p_tlist_into);
--Delete_List_Element(p_tlist_from, i);
--v_index_from := Least(v_index_from, Get_List_Element_Count(p_tlist_From));
--v_value := Get_List_Element_Value(p_tlist_from, v_index_from);
--v_value := Get_List_Element_Value(p_tlist_from, v_index_from + v_index_into);
--Copy (v_value, p_tlist_from);
--fnd_message.debug('done for one element');pause;
--exit when v_label is null;
END LOOP;
clear_list(p_tlist_from);
v_value := Get_List_Element_Value(p_tlist_into, v_count_from + v_index_into);
Copy (v_value, p_tlist_into);
EXCEPTION
when others then null;
END;

Using two T lists i want to create a UI, from which selections can be made

I want to create a UI in forms 6i, wherein there will be two T lists on the same canvas. I'll populate the left one from the record group and then make selections to the right one using four buttons in between. I'm using the add_list_element, delete_list_element, get_list_element_label, get_list_element_value built ins to do that. But it is not working properly.
I'm very new to development in forms.
If anybody has developed such an UI in forms, please help me.
Thanks,
Abhishek.

The kind of UI that i'm talking can be seen when we construct a new form manually, then we goto data block wizard. There we browse for a table and the wizard gives the list of the columns for that table. This is the kind of UI i want to develop. I hope the people at OTN would not dissappoint me.
Abhishek

How many minutes of video can my iPhone 4S record?

I have about 2.5GB free on my iPhone 4S, and I was wondering, about how many minutes of video would I be able to record with that?

Here's a discussion that says one hour = one gigabyte:
https://discussions.apple.com/thread/3774059?start=0&tstart=0

I want to create super-precise crop boxes. Can I create crop boxes from guides?

I am looking to make extremely precise crop boxes. I would like to position four guides in the shape of a rectangle and then create a crop box of that rectangle. Does Acrobat Pro include this functionality? Is there some other way I could achieve the same result?
I know that I can fine tune the margins in the Set Page Boxes window until the crop lines are perfectly aligned with the guides but that is very time-consuming and I was looking for a faster solution.

Thanks for the reply, Bill. I have already tried the snap to grid option. The problem with it is that the grid lines most likely will not be where my guide lines will be. Now if Acrobat Pro had a snap to guides option then that would help, but it doesn't, as far as I'm aware.

Video files exported with QuickTime Pro 7.2 can't be transferred to iPod

If I use the default Export to iPod export choice in QuickTime Pro 7.2 to export video files and add them to my iTunes 7.3 library, when I try to sync them to my 5th generation iPod with video (November, 2005), I just get the "can't be played on this iPod" message. I can create, transfer, and play video files on my iPod if I create them a different way (by using iSquint, ffmpegX, or No Frills DVD2iPod, for example). Exporting to mpeg4 using h.264 results in the same problem, even though I've used settings I know worked before. The export to iPod export choice does not offer any customization of settings. Although this problem is new, I can't be sure the immediately previous version of QuickTime Pro didn't also have the problem, but I know I have successfully used QuickTime 7 to create videos that could be transferred and played on my iPod in the past. How can I use QuickTime Pro 7.2 to create video files that will be compatible with my iPod? Thanks.
Mac OS X (10.4.10)

I can also verify this (QT Pro 7.2 exporting to .mp4 not compatible
with video iPod [firmware 1.2.1 on both 5G/5.5G units]).
This results in the unusual situation where custom H.264 output
is operable on the iPhone but not the iPod.
Example: your iPhone should play
http://homepage.mac.com/retiarius/sample.elements.mp4
but it won't transfer to a video iPod.
Yes, the workaround is to 'export for iPod' or do the conversion
within 'iTunes', but this in many circumstances will generate
larger files.
The closest description of this situation is:
http://lists.mplayerhq.hu/pipermail/ffmpeg-devel/2006-September/015930.html
Perhaps Apple will release a video iPod firmware update soon
to get the 'uuid' atoms and whatever watermarking they are
using these days straightened out.
I'm surprised this hasn't been noticed more by video podcasters
who dutifully use Apple's own QT Pro encoding tool to optimize
filesizes via the tunable H.264/.mp4 codec settings.

Creating an offline website that you can share with other people

I want to create a dynamic document where my client can click on something on the document and it will link him to another document. I have created a document that can do this through dreamweaver in the form of a website. The only problem is that my client does not want the information in this documentation to be online. So I need to find a way to basically make my website available to him offline.
So in essence I need to be able to share my website through a more discrete form, such as dropbox or email. The problem with this are the links. I can obviously easily share all my html files to my client but all the links will be broken since he will place the other html files on his computer. I have thought of trying to put the files on dropbox and just link them to that but it does not seem to work.
Has anyone done something like this in the past? I think what I need to do is make the link look within its own origin folder or maybe I'm looking at this from the wrong angle.
I would say my level of competence with dreamweaver is about beginner to novice and I understand the fact that I could create a website with password protection or something similiar but that is not ideal.
Thanks

AndrewCSDunn wrote:
I think what I need to do is make the link look within its own origin folder or maybe I'm looking at this from the wrong angle.
You hit the nail right on the head there.
I've created literally hundreds of HTML "local" site documents like that. I've run them from Flash Drives, CD-ROMs and Hard Drives. The KEY is to create the site in its own folder and make SURE all links point to files within that Root folder and don't have the "absolute" path. ("page.html" - NOT "File:///C/users/[username]/documents/sites/sitename/page.html")
Once you have it done, you can zip it or burn it or copy it to another drive and the links will work as long as all the files are in the root folder and subfolders.

Want to create a 10 minute "blank" video, can do with QT Pro?

Similar Messages

Maybe you are looking for