Want to create a dvd in encore, i have created dvd2-mpeg file and have timeline premiere?

hello guys
i hope you can help
i have adobe premiere cs6 and i have created a dvd2-mpeg file which i want to burn to dvd, its about 7 gb. i want to fit this on a single dvd or dual layer dvd if quality is a problem
i have been told encore can encode the files in the right format etc
please can you advise me on the steps i need to do so i can create a dvd disk please?
i have a macbook air which doesnt have a disk drive, so i will need the files to be copied on an external drive and burnt to a disk on another computer..

Hello, and welcome to the forums.
You'll need to put this onto a dual layer project, as single layer will only get you to 4.7GB (not quite as much as it seems, either, as DVD Gb are smaller than computer Gb are).
You do not mention anything about menus or navigational aids on your DVD - are these required?
Also, what form is your audio in please? MPEG audio is not a good idea, and for DVD use the files ideally need to be "Elementary streams", meaning separate video & audio files.
A simple slutiom might be to go back to your premiere pro project, and take the original timeline - before you transcoded it to MPEG-2 - and send this to Encore using Dynamic Linking. This will launch Encore for you, and place your premiere timeline into an Encore project.
There you can create your menus and set all your navigational stuff up.
When completed, simply compile the project to a DVD image - this will create an ISO file that can be moved for burning.
That's the short answer, but it can get a lot more complicated.
For starters, your audio file will need to be in a DVD compliant type- that means either LPCM or Dolby Digital.
LPCM is the best quality, but uses a lot more bits & reduces available space for your film so you need to decide how important the audio content is.
Encore will allow you to set the audio default to LPCM, and will then try to get the best fit for your video file in "Automatic" mode.
Once you can let me know the aswers above (are menus needed, what is your audio file) etc, I can walk you through the steps needed.

Similar Messages

I've created a prproj file and want to create a master DVD. Is there a simple way to do this?

I've created a prproj file and want to create a master DVD. Is there a simple way to do this?

I'm not sure I would call disk authoring a 'simple' process. Unless it's a very basic disk, or course, with but a single timeline and no menus. But the kind of disk we're using to seeing from Hollywood is anything but simple to create, and so not so simple to explain.
Might be time for some research.

Why Poor DVD quality Encore CS6 with Sony FS100 MTS files from PPro CS6

I am using PPro CS6 on a MAC Pro Quad zenon with Boot Camp. On PC side I was using PPro CS6 & Encore CS6 with MTS files from Sony NX 5U with NO Problems.
I just started using a Sony FS100 recording 1080i (60) format MTS files. When I Dynamic Link to Encore, the quality of the image is very soft compare to image from previous
projects with MTS files from Sony NX 5U.When I open a previous NX5U project, it still displays and creates an excellant dvd.Need help in solving problem.

Thanks for the advice. I tryed your method with same results.
I then tried changing project quality settings with somewhat better results
but not good enough results.
I looked at some of my previous dvds that used mts files from my Sony NX5U
and the quality was much better
that any results I am having using the Sony FS100 mts files. Even still
pictures do not look good now in Encore.
I then tried using Roxio Creator 10 Pro to make a dvd.
The results were excellant! Video files and stills are great.
I noticed that Encore CS6 is using the "Main Concept" codec to transcode.
Has something changed in the basic
settings with my Encore and can I reset my Encore to original defaults???
Any advice would be welcomed...Thanks again.
Tom

Encore DVD 2.0 Forces Transcoding on Spec MPEG Files

Since I have upgraded to Encore DVD 2.0 it insists on transcoding many of the MPEG files. The file are 720x480 NTSC and within the MPEG specs. Also the file is marked a do not transcode in the project view.
In fact if I use Encore DVD 1.5 and load the same MPEG file and create an identical project it does NOT transcode the MPEGS files.
Encore DVD 2.0 also freezes on occasion when you preview the project. Again Encore DVD 1.5 does not have that issue with the same files.
Please let me know how to correct this problem.
Thank You

The files are from DVDs I have previously created and new material. so a verity of applications. But the key here is they work perfectly with Encore DVD 1.5, and some of them were from DVD created with Encore DVD 1.0 they must have worked with with it as well.
Thanks

I want to create an intelligent file to show all pictures with 3 stars or more. Trying this, I don't know the character of the stars to fill in the respective box ??

I want to create an intelligent file in my finder to show all pictures with 3 stars or more. Trying this, I don't know the character of the stars to fill in the respective box ??
Thanks for your help.

Take a look here: http://hints.macworld.com/article.php?story=20110314131100623
One of the comments suggests you can't use greater than or less than with the star rating in Finder.
You might try a Raw Query with the kMDItemStarRating.
In the criteria popup menu, select Other, then find the Raw Query entry.
You might have to play around with the syntax, but try "kMDItemStarRating >= 3"
Take a look here for query syntax: https://developer.apple.com/library/mac/ipad/#documentation/Carbon/Conceptual/Sp otlightQuery/Concepts/QueryFormat.html#//apple_ref/doc/uid/TP40001849-CJBEJBHH

I want to create a Pdf file - do i misunderstand the product? I thought i could create a PDF similar to excel or word file or do i have to create there and convert to PDF? I bought the pack for $89.PDF Pack!

I want to create a Pdf file - do i misunderstand the product? I thought i could create a PDF similar to excel or word file or do i have to create there and convert to PDF? I bought the pack for $89.PDF Pack!

Hi Brian,
You can create it in Word or excel and then you can Convert it into .pdf Format
Here's a feature list that depicts benefits of PDF pack: Convert Word to PDF, Convert PDF to Word & Merge PDFs | Adobe PDF Pack
Please revert back if you have any other questions or need any help.
Regards,
Rahul

I want to create an apple id and i dont have credit card

i want to create an apple id and i dont have credit card

I didn't have a credit card to enter either. If you go to Walmart or whoever you can buy iTunes gift cards use one of them instead or a visa gift card

I'm so confused!! I just want to create interactive pdf files (with video and flash files), but this free trial version is confusing!! help!?!

i'm so confused!! I just want to create interactive pdf files (with video and flash files), but this free trial version is confusing!! help!?!

Thanks for your suggestions. I checked to see if the options you suggested were set incorrectly but they were set to sync all. This led me to think the problem was actually in the iphone. I re-initialized the iphone and did not allow the system to restore any of the previous settings. In essence, I forced the phone to reset to factory settings. Then my video podcasts started syncing. All is well now. I did notice that I had seven podcasts selected that were "HD" presentations, and as such, are not compatible with the iphone. I don't know if this had anything to do with my earlier situation, but now I'm getting the video podcasts automatically. I'm happy. It wasn't much fun forcing the iphone to forget all of my preferences and I'm still customizing the phone now several days later. I think I have everything working and back to normal except I haven't identified any of my email accounts as of yet. Thanks for your help.

I have created an iMovie file and have created an iDVD menu file. I am now ready to burn a DVD. But my superdirve is broken. If I put my files on a mac without iMovie or iDVD, can I burn my DVD with Toast 11?

I have created an iMovie file and have created an iDVD menu file. I am now ready to burn a DVD. But my superdirve is broken. If I put my files on a mac without iMovie or iDVD, can I still burn my DVD with Toast 11?

no need for Toast ..
tell iDVD to create a disk-image
transfer dmg to othe Mac
launch the Disk Utility, burn that dmg .......

Creating an XLS file and Zip it

Hi All,
we have a requirement where in we have to create an XLS file from internal table. This xls file then has to be zipped and mailed.
If anyone knows how to create an xls file and zip it in WebDynpro, without using OPEN, CLOSE DATA SET etc, Please let us know. It will be of great help.
Thanks,
Anand

>2) Convert the STRING format to XSTRING format by using the FM SCMS_STRING_TO_XSTRING.
Actually you should use CL_BCS_CONVERT=>STRING_TO_XSTRING now.
>3) Use the method COMPRESS_BINARY of class CL_ABAP_GZIP to compress the XSTRING file.
You probably want to use CL_ABAP_ZIP instead of CL_ABAP_GZIP. CL_ABAP_GZIP only does compression, which is fine for storing a single packet of data in the database. However CL_ABAP_ZIP is better suited for mult-part zip (multiple inner files).
>4) Use the method SEND_WEB_MAIL of class CL_HRRCF_SERVICES_MAIL to mail across the zipped contents.
This seems to be an HR specific class. Better to use the cross application, NetWeaver provided functionality for sending mail - CL_BCS.

How to use cfdocument create a PDF file and save the file in server?

Hi,
I want to use cfdocument to create a PDF file and save it in
the server for other people to download,can you give me a idea how
to do this.Thanks.
<cfdocument format = "PDF" pagetype="A4"
orientation="portrait">
</cfdocument>
Mark

Hi
<cfdocument filename="" format = "PDF" pagetype="A4"
orientation="portrait">
</cfdocument>
Give the physical path to the filename. You have write
permission for this folder to create a PDF file.

Create a css file and use it

Hi
i use jdev 11.1.1.7
I have several items on the page . for example panelFormLayout .
i want declare several property (background-color ,...) and assing it to all of panelFormLayout .
so whenever i change color of background , background color of ALL panelFormLayout change easily .
(I created a css file and declared my property in it but i cant use it !!! )
NOW i hope to create a CSS file or(any thing you suggest) for this reason and use it .
How can i do this ?
Thanks alot

You can also download the stand-alone Skin Editor to help you create the skins and style you want.
A bit more on the topic here:
https://blogs.oracle.com/shay/entry/styling_specific_adf_components_with

Aperture Creating Large JPG file and placing it with Ref File

When I imported a group of images Aperture automatically created a JPEG file and placed it in the same folder I imported the Master images. The masters are 15.x meg and the JPEG is 3.x Meg. Any idea why this is happening - it is a new behavior

This was news to me as well. Here's what Apple has to say about it:
http://docs.info.apple.com/article.html?artnum=304868
Kind of a bothersome thing to have to do before importing (their suggestion is to move the jpgs before importing). I'd shoot in RAW only except my wife wants the jpgs on her computer while I want the RAW files on mine.
Message was edited by: Badunit

In Quicktime Pro I try to create a mov file and I get an error "-43 a file could not be found". Any ideas?

In Quicktime Pro I try to create a mov file and I get an error "-43 a file could not be found". Any ideas?

I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

Create a csv file and send it in an email

In coldfusion, is it possible to create a csv file and send it in an email, without ever saving that file on the hard drive?

Yes, you can create an email attachment without writing a file to disk. This feature was introduced in CF 8.0.1.
I've posted a sample to a previous thread on the forums.
http://forums.adobe.com/message/2123297
See the CFMAILPARAM section of CF 8.0.1 release notes for attachments without a file on disk.
http://www.adobe.com/support/documentation/en/coldfusion/801/cf801releasenotes.pdf

Want to create a dvd in encore, i have created dvd2-mpeg file and have timeline premiere?

Similar Messages

Maybe you are looking for