Want to create private blogs / diaries for clients

Hi all - I am looking for the fastest, most effective way to create private blog (diary) areas for my site's readers.
In the distant past, I handcrafted an extensive diary and note system, but today, there are two problems. The first is that compared to what is offered today, it looks like an antique, and two, I want to minimize stress for the people who run CF and SQL servers and make sure I create the most secure system possible.
I want people to create an account that includes a private "note/blog" area. Their entries can be seen sequentially by, at least, date. It would be nice to search the entries by key words, however, I'm OK with keeping things simple.
I wouldn't mind using something like a very stripped down CMS like, for example, WordPress. The issue is that I anticipate making thousands of diaries. So I'm more concerned with the CMS than WordPress itself and all of its themes.
I am aware of FCKeditor and fooled around a bit with it 10 years ago. Possibly that is all I need to concentrate on. If you recommend that, do you know of a CF group/people who are expert in it? I have the skill to craft my own and currently, no budget for outside programmers (wish this was not true), but would consider buying a module including an enrollment system already done except for final hookups.
Last, I'm aware of forum creation services. I use WebsiteToolbox for one of my sites, for example. Does anyone know of any service that could create multiple "personal" topic streams?
Hopefully, Karen

There are a couple of existing open-source CF-based CMS systems that are frequently used for blogs: Mura CMS and ContentBox. Might be worth looking into.
-Carl V.

Similar Messages

Manger wants to create a leave request for inactive employee

is this requirement possible ?
my client is asking that the manger wants to create a leave request for inactive employee on his behalf
when the manger is trying to create a leave request it is throwing the error message as Invalid personal number.
Comments required from the experts

Hi solomon,,
I dont know the reason behind
the inactive employee is showing under the mss Home page of manger.
Is there something wrong functionally/technically ?
I Know what would be the status of inactive employee. I tried to convenience my client,but no luck
Requirement is in this way :
Manger wants to create a leave request for inactive employee( on the behalf of inactive employee, the manger wants to create a leave request ) in manager self service tab from Home

Hi, can anyone tell me if I can have more than one iTunes account on the same PC. I've just bought my wife an iPad2 and want to create a separate account for her. Can I do that on the same PC as mine?

Hi, can anyone tell me if I can have more than one iTunes account on the same PC. I've just bought my wife an iPad2 and want to create a separate account for her. Can I do that on the same PC as mine? Thanks.

I would advise that you not set up a second Apple ID. It's really not necessary - having two Apple IDs won't affect how iTunes works with your iPads - and will just complicate matters. Each iPad will be treated independently and can be set to sync only the items you want on that particular iPad. If you really want to keep the two iPads separate, set up different iTunes libraries and have only those items you want on the related iPad in that library, rather than a different Apple ID. If you plan not to use a computer and just download directly to the iPads, you can again choose what apps and content each iPad gets.
But answering your specific question, you can have content from up to five iTunes Store accounts on any one computer or iPad. To create a new iTunes Store account, you'll need a different email address, and from there you just create the account the same way you did the first one.
Regards.

I just recently purchased a mini iPad for my child. It was set up in the Apple store with my Apple id. I now want to create an Apple id for my child and switch it over, how can I go about that. I already downloaded some of the games from my account.

I just recently purchased a mini iPad for my child. It was set up in the Apple store with my Apple id. I now want to create an Apple id for my child and switch it over, how can I go about that. I already downloaded some of the games from my account.

With a new account, you'll need to rebuy the games.
Each user should have their own icloud account, otherwise they end up getting the same emails, contacts, calendars, notes, reminders, etc. - usually not what you want. But if all have been sharing the same itunes ID, keep it that way, you can have different IDs for itunes and icloud.
If you already have another icloud account, and want to set it up on a device, then go to Settings>icloud, scroll to bottom of screen and tap Delete Account. This only disconnects the device from that account, no data is lost on icloud. Then enter the account ID that you want to use.
To create a new icloud account, go to
http://www.apple.com/icloud/setup/

Which product should I buy? I want to create vintage/retro posters for band and Bar

which product should I buy? I want to create vintage/retro posters for band and Bar

Good day!
Instead of buying right away you may want to avail yourself of the free 30 day trial first to see which program fits your needs.
Photoshop and Photoshop Elements may be worth a try.
If you intend to create more graphic/typographic designs Illustrator may be worth looking into, too.
Someone else may have more/other recommendations, though.
Regards,
Pfaffenbichler

I want to create a authorization group for cic0 tcode.

i want to create a authorization group for cic0 tcode.
in detail...
in cic0 tcode i will enter business partner name
and press enter it gives me list of same names..
i want to restrict as per the region..there...
for exapmle....
if i enter name as raja
it gives me a list of raja in all region
but i want for a particular region....
how to create a authori object.....................
Regards
Anbu

https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a92195a9-0b01-0010-909c-f330ea4a585c
If you start SU21, find the authorization object and double click on it you should be able to see who the author is.
Or you can findout through SUIM

Screensaver for iCal and iPhoto? Want to create a central hub for family

I want to create a central hub for the family to view iCal (e.g., daily and upcoming events) and also iPhotos. Is there a screensaver program that will automatically show this stuff on a Mac desktop when not in use?

The only way to do that is to do the lined pages in other software (Word, pages, Pagemaker, etc) and print them to PDF using the send PDF to iPhoto option - see Old Toad's tutorial #19 for more details - http://toadstutorials.info/
LN

Want to create unix shell script for Clone procedure in 11i and r12

Want to create unix shell script for Clone procedure in 11i and r12 .Can anyone help me on this as I m new to oracle apps and scripting.
Thanks in advance .

user11958935 wrote:
Thanks but I want it for application cloning ie adcfgclone and autoconfig etc .Please see old threads for similar topic/discussion.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Automate+AND+Rapid+AND+Clone&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Automate+AND+AutoConfig&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

I want to create a cover page for a document that is not included in the page count. How can I do this?

I want to create a cover page for a document that is not included in the page count. How can I do this?

Menu > Insert > Section Break at bottom of cover page.
click in following page > Inspector > Layout > Section > Page Numbers > Start at: 1
Peter

Want to create new protection group for 2 members which are already under another protection group.

Want to create new protection group for 2 members which are already under another protection group. I have 12 servers under xyz protection group, want to move 2 members server to new protection group. How it is possible without loosing current backups.

Hi,
It all depends if the data source was originally co-located on the same replica shared with other data sources. If not then DPM will simple re-use the same replica and pick up where it left off. If it was co-located, then the old replica and RP
volume is shared and the RP's will expire as new ones are made on the new replica and RP volume created when it's re-protected.
Moving Between Co-Located and Non-Co-Located Protection Groupshttp://technet.microsoft.com/en-us/library/ff399045.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

WRT110: I want to create an access rule for one client for one application during one time period

I have a problem with one of the clients on my LAN which is running uTorrent to detriment of everyone else. It saturates the pipe. I have been unable to prod this user into bothering to tweak their settings to throttle bandwidth back and so have resorted to an access rule on the router which kicks that MAC address off during a particular time period during the day. But as irritated as I am about this slacker sense of outrageous entitlement, kicking them off entirely seems a tad heavy handed even for me.
So, In the router I can create a rule per MAC address and specify time. But is it possible to limit this to denying uTorrent ONLY? And if so what port or port ranges would I use.
Alternatively I already use a QoS setting for one of my VoIP TA's. Would I gain anything by degrading the application indirectly by creating a QoS = LOW for that port range? Again, I don't really care about any other application, just uTorrent and just that client. How much degradation is there really in setting QoS to LOW?

Well it wont make much difference, when you enable QOS service on your router. Yes it is possible to Deny uTorrent application from your Router. When you are Under "Application and Gaming" Tab, Under "Blocked Application" you will find "Application Name" , "Port Range" and "Protocol" so you need to input under Application Name "uTorrent" and under port range you need to input the port number which uTorrent application use and then under protocol select "Both" and click on ADD. Then again in Application you will find uTorrent , select and click on (>>) right arrow so it will block that application on your Router. By doing this it will block uTorrent from your Router.

I want to create a blog on my website but don't know where to start.

My server is Lunarpages and they have Wordpress for creating a blog.
Can you direct me to simple bulleted instructions on how that might interface with using my website template that is consistent for all html pages?
I already have eBlogger.com blog but when I try to use their edit HTML feature and paste in my template code, I get an error message that the "meta" code doesn't have an end tag. They say I need to add the end tag. Here's the code they pointed to:
<meta http-equiv="Content-Type"content="text/html; charseet=iso-8859-1">
My template works fine with my website. What do you think is happening here with eBlogger? Lunarpages forum recommends I set up with Wordpress. Trying to save time here. But if WP works better overall, I'll do it.
I basically want these things:
use my template so it's consistent with all pages.
blogg not only allows me to post but also comments and automatic archiving (i.e. past 60 day)
Have best security for blog.
I also want to add a button that lists those social networks I post on. I am hoping it's possible to set up one blog and have what I post automatically posted on the others (i.e. Facebook, Google, eBlogger). Is that possible? An example of a link Lunarpages has:
http://www.addthis.com/pages/toolbar-landing?utm_source=hm&utm_medium=link&utm_content=ATI EToolDL_orig&utm_campaign=ATCMIE_DL

WordPress is in a class of it's own. It began it's open source life as a blogging system but it has evolved into a powerful, feature-rich CMS (content management system). In short, if you elect to use WordPress on your domain, you might just as well use it for your entire web site.
To work with WordPress, you will need a firm understanding of HTML, CSS and how PHP includes work.
WP requires you to set-up a dynamic work environment (see links below)
Find a WP Theme you like that won't require much customizing on your part.
Related Links:
http://wordpress.org/
Get one of the following testing servers for your OS and follow the installation instructions.
WAMP for Windows
http://www.wampserver.com/en/
XAMPP for Windows
http://www.apachefriends.org/en/xampp-windows.html
XAMPP for Mac
http://www.apachefriends.org/en/xampp-macosx.html
MAMP for Mac
http://www.mamp.info/en/downloads/index.html
Setting up a PHP development environment for Dreamweaver
http://www.adobe.com/devnet/dreamweaver/articles/setting_up_php_05.html
Creating a WordPress Theme in DW
http://www.adobe.com/devnet/dreamweaver/articles/creating_wordpress_theme_with_dreamweaver _pt1.html
Best of luck,
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web-design.blogspot.com/

I have a iPhone, and iPad. I just got a iPod. I want to create a new account for the iPod and use the same credit card information. Is this possible?

I have an iPhone, and IPad. I just got a iPod. I want to create a new apple ID for the iPod so I can access face time and messages separately. However can I use the same credit card account?

Just do it. You can use the same credit card for multiple accounts.

Steps to create a logical system for client 001.

Hi,
In client 000 go to transaction scc4. There you create your new client for sap netweaver abap trial version for BI?
Here, can you give me steps to create a logical system with client 001 using tcode scc4.
Thanks,
Kannan

hi
     First log on to SAP R/3 server connections Go to SCC4 in R/3 & in Scc4 BW server. A screen opens in that logical name of the system would be opened in both (R/3 & BW).
     Take notepad in it save .R/3 & BW logical names go to R/3 & click SM59 to create R/3 connections click then a screen opens gives BW logical name in RFC Destination option & give connection. type 3 & give some description & then press enter.
     You will get another screen under it then at target host gives BW server name we will get it from BW logon change ID, IP address option & give the system no. The system no go to logon pad just drag it then you will see the name.
     Then click on log on securities go to log on give BW server details like No, client user Password. Then save it then click test connection tab if there are errors then it gives yellow color if they are no error the whole thing come as white.
     Then click on the Remote Logon then we go to BW server give RFC SM59 & click create. Then give the server name which is at the bottom right corner give it then give the no, name, password in logon Security save it & test connection & then remote logon.
     R/3 - B W - R/3
     Logical connection source system connection is used to transfer the data from R/3 to BW. Go to BW system& click RSA1 go to source system option go to top to the source systems right click on it. Then click create then a screens opens then.
     PC Flat file , DB  Database
     Select the option manual then a screen appears RFC Destination, Logical source name then click OK then it goes to opens other screen save it test connection then remote login then it go back to the then a screen opens then click only activate.
     BW  RS1  SOURCE SYSTEM  CREATE MANUAL AUTOMATIC CELL
     R/3  Test connections login  back  replicate method  active data R/3 Source system you will able to.
regards
ashwin

I want to Create an Customised Viewer for my company to view a PDF document.

Hello
     I want to Create a Customised Viewer to view a PDF document.
     I will be creating Setup.exe after Desiging the Viewer with content, only that Setup file will be sent to the end user.
     Please help me which software is best to Design and Create the viewer.
     NOTE : The viewer required User name and Password and other security features.
Thanks
Suresh

when i go to set up his itunes account with my mastrcard it rejects it. I'm using Visa for my account

Want to create private blogs / diaries for clients

Similar Messages

Maybe you are looking for