Want to deactivate Workflow for single Employee

Hi Team,
We have a requriement to deactivate T&E (Trip Approvals) workflow for a
Personnel number, Basically he is a director of the company who doesn't want to
and allow his Assitant to do it on his behalf with out him receiving the
approval.
Currently we are following the below process
Trip created by Employee --> Checked and Approved by Manager --> If
not approved by 5 days, it will go to Manager's Manager (Senior level).
Now for this specific case, we need an exception process as below, where we
need to deactivate the Workflow only for Director, if not possible then the
trip's Wrokflow can be generated as below.
Trip created by Director --> Approved by Assistant.
Please guide me.
Regards,
Sandeep

Hello
You can use a standard functionnality in workflow which is substitution/delegation. The director can delegate for a specific task (trip approval) and for a period of time to another user.
So he will delegates to his assistant and the assistant will do the validation on his behalf.
It is a common requirement and delegation is often used for high level managers.
Regards
Mathieu

Similar Messages

MULTIPLE POSITIONS FOR SINGLE EMPLOYEE

HI EXPERTS,
I AM AN ABAPER AND NOW I AM WORKING WITH HR DEPT .I HAVE TO BRING MANY POSITIONS TO A SINGLE EMPLOYEE.
EX) RAM WILL BE THE AAST MANGAER FOR FINANCE AND BUSINESS EXECUTIVE AND WILL BE ONE AMONG THE BOARD OF DIRECTOR.
SO WHEN WE CREATE ACTIONS WE CAN CREATE ONLY ONE POSITION AT A TIME .
SO HOW TO CREATE MULTIPLE POSITIONS FOR A SINGLE EMPLOYEE.???

Hi,
You can assign multiple position to single employee, based on the Employment Percentage in IT001, you can assign multiple position.
This concept is especially called Concurrent Employment. Assigning of multiple position, in Concurrent Employment, SAP has developed in such a way that, it will synchronize your Work schedule and show it one screen and payroll will calculate the amount from various assignment.
I have posted the Wiki about the Concurrent Employment in the Wiki section. If you want go through that, you will get little idea.
Good Luck
Om
Reward it, if u feel helpful.

Multiple entries for single employee in salary posting document

Hi All,
Require your help badly in sorting out an issue.
For a particular provision, for ex - Prov for LTA, it is observed that multiple entries appear in salary posting document for a single employee. It is the case for other provisions too like LTA, Gratuity for numerous employees.
Account Number with Text Wage Type Pers.No. Credit Amount Crcy
14520 PROV FOR LTA-CY 9LTA LTA 700002 11,902.00 INR
14520 PROV FOR LTA-CY 9LTA LTA 700002 12,984.00 INR
14520 PROV FOR LTA-CY 9LTA LTA 700002 3,636.00 INR
Could you pl help me identify the reason and sort out the same.
Thanks
Amitava

Hi, 
How have you configured the 9LTA's provision? Is it any standard functionality for PY-IN or custom?
Good luck 
Thanks,
Amosha
 "Known is a drop & unknown is an OCEAN!"

Benefits enrollment for single employee without spouse

Currently on ECC6 (ERP 2005) and EP7......We have an enrollment reason for "anytime" reasons and within that, several plans are offered, one of which is spouse life insurance. On the backend, this works fine (ie. via PA20/30) however, for the ESS side of things, we seem to have an issue.....
Now, first off, for a single person, this would cause an error message to pop up saying the spouses' date of birth could not be determined (used in the insurance calc, I suppose) since the person did not have a spouse. Doh! Sooooo we applied a note that implements a BAdi and removes the error.
(notes applied:
- 861657 Missing spouse information during benefit enrolment
- 1012001 BADI Correction for ERP 2005 )
Problem now however, the error does not show, but the user STILL has no plans offered to them. If we add a spouse, viola...they all show up. If we keep the person without a spouse and simply remove that plan from the enrollment....still no plans offered.
Ideas?
(posted in the self-services forum as well)

Found and fixed ! Additional notes had to be applied....
Note 999510 - ESS:webdynpro application do not display any benefit plan
and the main one that fixed it....
Note 973390 - No Benefit plans are displayed for Adjustment Reason
Hope this helps others!

Shared Computer - Want Creative Cloud Application for single user only on Mac

Hi, the creative cloud icon appears in the menu bar for all users on our family mac. I only want it for my own user, not for my family users, because they are asked about CC user and password. How can I set it up so that it doesn't appear in the menu bar for the other users? Note: The menu "Settings" can only be reached when logging on to Adobe CC first - so this is not an option as they don't have such a user.

Hi,
unfortunately the description on how to disable doesn't work (I found it already in the internet before).
- For my own user (and also when I'm logging on with a family user), the Creative Cloud App doesn't appear in the list of apps. (See screenshot).
- For other users, it the "Log In Items" (German: Anmeldeobjekte) doesn't even appear (see screenshot).

Workflow call for Single Step Release Cancellation in PO

Dear All,
I want to start warkflow for "Single Step Release Cancellation" of PO at header level (not for Rejection button), but there is no event available for this in BUS2012. How can I perform this? Is there any enhancement that is called after record updation in database (after post)?
Regards
Nadeem

Hi,
In CDHDR Table while you performing the Transaction are you getting an Entry.
If you got it you have to configure in SWEC.
Check this [link|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80ddeba4-e780-2b10-7bb2-fc7a33efabbd].
Regards,
Surjith

Workflow for LIV- MIRO

Hi SAP Guru
I want to activate workflow for Logistic invoice verification (MIRO)
My requirement is :- At the time of MIRO , system will post a payment bolck (say "P") and will not allow to make payment to the users and it will trigger a workflow . Once the same is release by the designated person ( in workflow) then only system should allow payment posting for the invoice.
Pls let me know how to activate this workflow.
Is it possible in standard system or we need to develop a workflow.?
pls let me know how to go about this
Regards
Ajay

hi,
Single click is possible if you have maintained all the defaults as below,
1. Your PO qty will always be equal to your GR qty (so you need nt change the GR qty)
2. Sloc populate frm the PO (so no need to key the sloc)
3. Make the default OK in the MIGO default setting.
and if all this done then as soon you enter the PO and line item number you can just save it.
For MIRO,
Just make the ERS setting then no need to do any MIRO.
Thanks,
Suresh

To generate quota only for disabled employees

Hi All,
i have one requirement here. i need to generate quota for challeneged employees. but there is no separate ESG for time quota to identify challeneged employees.
i created challeneged groups in challenge infotype 0004. ans assigned this challenged group in genaration rule for quota types. but it is showing quota for all employees in time evaluation , It is not picking up the information from IT 0004.
i want to resrtict quota for all employees. it should display challenged quota only for challenged employees, when i assign challenge group in generation rule for quota types.
can anybody provide me the solution for this. it isd urgent. rewards will be given.
Regards
Vani

Hai..
Check Infotype 82.. Special Absences..
Special Absence Data
Additional Absence Data
Define Types of Additional Absence Data
Create Workers' Compensation
Define Events for Absence Data
Link Absences to Additional Absence Data

How to trigger workflow for already created purchase order ?

HELLO EXPERTS
let me clear my scenario first . i have 1 purchase order whose workflow is not triggered . means it is showing me message no workflow that have already worked for this object.i have created 1 more purchase order taking reference of this purchase order means both are same same message for this po also. it was happening because event linkage for the business object bus2012 is not activated but now it is enabled and i have created third purchase order with reference to above po means this third po is also same as above 2 no change other than po number but for this workdflow is getting triggered . now i want to trigger workflow for orignal first po but for my first po it is showing me same message that no workflow that have already worked for this object. what i have to do to trigger workflow for this po. i have performed this steps in test system. i have workflow number

Hello !
      You can trigger the workflow from SWUE.Enter bus2012 and created for object type and event respectively.
      Click object key button where enter the purchase order number which have been already created.
      But, why do you want to trigger the workflow again for already created purchase order ?
Regards,
S.Suresh

Workflow for Time-Sheet Approval through ESS in Portal

Hi,
We want to implement Workflow for Time-Sheet Approval through ESS in Portal.
Can you please tell in detail what configurations are needed to be done in portal like UWL?
Please explain in detail.
Thanks,
Rajani
Edited by: Rajani Nandagiri on Nov 19, 2009 10:31 AM

Hi,
Solved.
Re: How to Configure UWL in Portal
http://help.sap.com/saphelp_erp2005/helpdata/en/ca/115e4088dc0272e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/39/a1bb5c4c0d4ab4a417e87ef35f1efa/frameset.htm
Thanks,
Rajani

Workflow for G/L

Hello,
       I want to create workflow for G/L accounts., But I am unable to get the business object with events, which would trigger the workflow when G/L is created using FS00 tcode.
           Can any one help me to trigger the workflow, as soon as the G/L is created.
Thanks and Regards,
Poornima...

Helllo,
        Mr.Swaminathan,
             Thanks for ur answers, I am using 4.7 version, I dont find any events under bussiness objects BUS2069 , BUS3006, Can u help me out, with triggering events for GL Account Creation..
With Regards,
Poornima.

Workflow for release strategy of Po's

Dear Experts,
We want to have Workflow for release strategy of Po's please let me know what settings are to be done from MM side. & form Abap what developments are required.

Hi
Pl check the below link
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/enterprise-resource-planning/sap%20mm%3a%20purchase%20requisition%20with%20classification%20and%20workflow%20approval.pdf
SAS

Server initiated workflow for windows mobile

Hello,
I have used SUP 2.0 for message based client to develop the workflow.but I want to devolop workflow for SAP which will
be must have server initiated .I have also tried the" sup_tutorials_mobileworkflow_james ",,but james is manual .so is there any
another possible way for server notification which is directly generated by SAP.Please replay as early as possible.

Hi there,
SAP can generate notifications for the SUP server to recognise and send to devices. There are tutorials and whitepapers provided on the [Sybase Infocentre website|http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01333.0200/doc/html/fre1252343452818.html?resultof=%22%44%43%4e%22%20%22%64%63%6e%22%20] which show detailed instructions on how to achieve this.
Cheers,
Brenton.

Want to deactivate T&E (Trip Approvals) workflow for a Personnel number

Hi Team,
We have a requriement to deactivate T&E (Trip Approvals) workflow for a Personnel number, Basically he is a director of the company who doesn't want to and allow his Assitant to do it on his behalf with out him receiving the approval.
Currently we are following the below process
Trip created by Employee --> Checked and Approved by Manager --> If not approved by 5 days, it will go to Manager's Manager (Senior level).
Now for this specific case, we need an exception process as below, where we need to deactivate the Workflow only for Director, if not possible then the trip's Wrokflow can be generated as below.
Trip created by Director --> Approved by Assistant.
Please guide me.
Regards,
Sandeep

Hi Sandeep
A quick and dirty approach is to set a start condition to check the employee Personnelnumber<> Director's personnel number.
However, if this personnel number is changed in future then a workflow change will be required.
Chances are less that the org unit "Number" will not change, assuming that the "Director" position in your setup is heading the whole company (the parent org unit (there is none above). So, best is to check if the triggering personnel number is NOT the HEAD of the Org Unit XXXX (the XXX org unit is the company - top most org unit)...provided that "Head of Org Unit" is marked in your org structure.
regards,
modak

Create Multiple tasks for Single Item in List using state machine workflow in sharepoint

Hi,
I want to create multiple create tasks for Single Item in List based on Assigned to column using state machine Workflow through visual studio
Here Assigned to column allows multiple users. so i have to create task for every user based on column .
I'm trying for this but i didn't got any solution
Please provide solution for this.

Hi,
According to your post, my understanding is that you wanted to allow multiple users to approve.
There are some articles about creating parallel tasks in state machine workflow, you can have a look at them.
http://www.codeproject.com/Articles/477849/Create-Parallel-Task-in-State-Machine-Workflow-in
http://msdn.microsoft.com/en-us/library/office/hh128697(v=office.14).aspx
http://social.technet.microsoft.com/Forums/office/en-US/b16ee858-4360-479a-a686-4ee35b7be9db/sharepoint-2010-workflow-creating-multiple-tasks?forum=sharepointdevelopmentprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Want to deactivate Workflow for single Employee

Similar Messages

Maybe you are looking for