Want to disable display of column values in Selection Panel (11g)

In 11g, double-clicking on a column from the selection panel (under the Subject Areas heading) adds that column to the analysis. It also "expands" that column so that the first 20 values of that column are visible in the selection panel, immediately under the column that was double-clicked.
I don't want to see those first 20 values of the column pop up every time I add a column to the analysis by double-clicking. And although dragging the column into the analysis does not cause the popup behavior, dragging is not my team's preferred method of adding the column.
Is there a way to disable that expansion when double-clicking to add a column to an analysis?
I suppose it also means that we would be searching for a way to turn off the little plus sign next to each column as well. I don't want to EVER see those values.

I suppose you might want to know WHY I want this turned off.
One of my columns in the repository, Region, is defined as a concatenated text string that will be treated as HTML in Analytics. I see this when Region expands in the selection panel:
Central
East
WestWhen displayed on an analysis, I see Central, East, and West as the regions, as expected. The hover behavior for each region properly shows its title (Region+Manager) as well.
If the expanded display in the Selection Panel showed Central, East, and West, I wouldn't care. But because it shows the actual text for that column (the HTML string) it's rather confusing to the uninformed. Expanding it to include other tags would make the display almost useless unless you know some HTML. Even then, it's ugly.
Edited by: Mark T. on Mar 15, 2013 6:13 AM - didn't know I could use the tag

Similar Messages

How to update zero to a column value when record does not exist in table but should display the column value when it exists in table?

Hello Everyone,
How to update zero to a column value when record does not exist in table but should display the column value when it exists in table
Regards
Regards Gautam S

As per my understanding...
You Would like to see this
Code:
SELECT COALESCE(Salary,0) from Employee;
Regards
Shivaprasad S
Please mark as answer if helpful
Shiv

Infopath display lookup column value

Hi
I have a Infopath 2010 form with which displays an employee record. Some of the columns are lookup from a sharepoint list.
How can I display the value of the lookup column instead of Id in the form.
The form has the main connection and the secondary connection for the lookup sharepoint lists.
The sharepoint lookup column is set to "Title" in additional column settings. Add a column to show each of the additional fields are all unchecked.
I searched google, but couldnt find an answer.
I tried to do the way described in http://sharepointsolutions.com/sharepoint-help/blog/2011/11/get-infopath-to-display-lookup-column-value-not-id/
But get error , since it works for repeated table.
Any Ideas?
Thanks
Venky

Hi Venky,
How did you create your look up column? Which column type is the column which your look up column looks for?
By my test, it is default behavior that the InfoPath form display the value of the lookup column.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

Horizontal display of column values

HI All,
I got a requirement in that i need to display one column horizontally
Such as
 abc abc1 abc2 abc3 abc4 --->Second column in my table
1
2
3
4--->First column in my table
 Kindly help me with this.
Edited by: Basva on Feb 22, 2011 10:47 PM

Please consider the following when you post a question. This would help us help you better
1. New features keep coming in every oracle version so please provide Your Oracle DB Version to get the best possible answer.
You can use the following query and do a copy past of the output.
select * from v$version 2. This forum has a very good Search Feature. Please use that before posting your question. Because for most of the questions
that are asked the answer is already there.
3. We dont know your DB structure or How your Data is. So you need to let us know. The best way would be to give some sample data like this.
I have the following table called sales
with sales
as
 select 1 sales_id, 1 prod_id, 1001 inv_num, 120 qty from dual
 union all
 select 2 sales_id, 1 prod_id, 1002 inv_num, 25 qty from dual
select *
from sales 4. Rather than telling what you want in words its more easier when you give your expected output.
For example in the above sales table, I want to know the total quantity and number of invoice for each product.
The output should look like this
Prod_id sum_qty count_inv
1 145 2 5. When ever you get an error message post the entire error message. With the Error Number, The message and the Line number.
6. Next thing is a very important thing to remember. Please post only well formatted code. Unformatted code is very hard to read.
Your code format gets lost when you post it in the Oracle Forum. So in order to preserve it you need to
use the {noformat}{noformat} tags.
The usage of the tag is like this.
<place your code here>\
7. If you are posting a *Performance Related Question*. Please read
 {thread:id=501834} and {thread:id=863295}.
 Following those guide will be very helpful.
8. Please keep in mind that this is a public forum. Here No question is URGENT.
 So use of words like *URGENT* or *ASAP* (As Soon As Possible) are considered to be rude.

Display and return value in select list.

hi,
i want to display the value in select list coming from this quary .
select student_id from class_record where class_id =:p1_class_id and SECTION =:p1_section
minus
select student_id from STUDENT_TYPE_DETAILS where class_id =:p1_class_id and SECTION =:p1_section;
but i want f_name and last name with student_id .f_name and l_name store in table s_per_det.student is also in that table.
how can i define display value and return value in this quary using 3rd table s_per_det.
How can i do this.
Thanks
manoj

Ooh, MINUS.... Can you not use a NOT EXISTS in this case, could have a big effect on the execution plan?
Something like this perhaps?
SELECT f_name||' '||l_name,
       stundent_id
FROM class_record a,
     s_per_det b
WHERE a.student_id = b.student_id
AND   a.class_id   = :P1_CLASS_ID
AND   a.section    = :P1_SECTION
AND   NOT EXISTS(SELECT 'X'
                 FROM student_type_details c
                 WHERE a.student_id = c.student_id
                 AND   c.class_id = :P1_CLASS_ID
                 AND   c.section = :P1_SECTION)Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)

Query Report - To display additional column in list selection box.

Hi,
There is query report where i want to display the additional column in list selection.
Below is the system query report, where parameter passed is card code.
When the cardcode - list selection is clicked system displays 2 columns i.e. Customer Code & No. of Records.
Now in the same list selection; is it possible to display the customer name along with cardcode only for reference.
SELECT T0.DocDate, T1.SlpName, T2.Name, T0.DocDueDate, T0.DocNum, (CASE WHEN T0.DocStatus = 'O' THEN 'Open' ELSE 'Closed' END) AS Status, T0.DocTotal FROM OQUT T0 LEFT JOIN OSLP T1 ON T0.SlpCode = T1.SlpCode LEFT JOIN OCPR T2 ON T0.CntctCode = T2.CntctCode WHERE T0.CardCode = N'[%0]' ORDER BY T0.DocNum DESC
Kindly let me know the details.
Thanks & Regards,
Yogesh Jadav

Hi Yogesh Jadav,
The answer is NO. You may only display either code or name but not both.
Thanks,
Gordon

I want to display one column values with multiple symbols

i am created one report.
my column name is offshore & on shore i want display 3 values with % symbol, then i want show 4 th value as $ 2000,
but it was allowing only one format $ or % but i need to display symbols with my values.

Try the following :
give a name to the following formula like @getvalue
Numbervar x;
if
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("ANI"), CurrentSummaryIndex) = 0 and
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Offshore Other"), CurrentSummaryIndex) = 0 and
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Syntel"), CurrentSummaryIndex)= 0 and
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Employee"), CurrentSummaryIndex) = 0 and
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Contractor"), CurrentSummaryIndex) = 0 and
//(GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Mgt consult"), CurrentSummaryIndex) = 0 and
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Clerical"), CurrentSummaryIndex) = 0 and
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Other"), CurrentSummaryIndex) = 0
then
x:=0
else
x:=(GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("ANI"), CurrentSummaryIndex) +
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Offshore Other"), CurrentSummaryIndex) +
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Syntel"), CurrentSummaryIndex))
(GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("ANI"), CurrentSummaryIndex) +
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Offshore Other"), CurrentSummaryIndex) +
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Syntel"), CurrentSummaryIndex)+
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Employee"), CurrentSummaryIndex) +
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Contractor"), CurrentSummaryIndex) +
//GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Mgt consult"), CurrentSummaryIndex) +
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Clerical"), CurrentSummaryIndex) +
GridValueAt(CurrentRowIndex, GetColumnPathIndexOf("Other"), CurrentSummaryIndex)
) * 100
Now create a new formula and check the value of the above formula :
if {@getvalue} > 50 Then
"$"&{@getvalue}
else
{@getvalue}&"%"
Hope this will resove the issue.
Thanks,
Sastry

Problem in displaying multiple column values using Narrative View

Hi All,
I have a requirement where in I need to display column 1 of an Answers report as a header and all values of column 2 below tht.
There are multiple values from column 2 for every value in column 1
Example:
Group:
Grp (This is column 1)
Activity:
Act1
Act2
Act3 (These are values from column 2)
I have used narrative view for this which looks like:
Group: @1
Activity:@2[br/]
But this displays the value of column1 along with every value of column 2. I want column 1 value to be displayed only once.
Thanks in advance
Radhika

Hi see this link it may helpful
Re: Narrative view not showing up in the report
Re: how to transpose columns to rows in OBIEE
Regards
Naresh

Displaying the column values of a wizard-generated form

Hello,
I created a Master-Detail page following the examples in the various Apex guides. The form is not working correctly, unfortunately. When I click the Add Row button a row is added at the bottom of the table. Once I enter data into that row and click the Apply Changes button I get an SQL Insert error. I understand error message; a hidden column is not getting populated. Having said all that, that is not my problem.
My problem is understanding how APEX is storing the data it displays in the table so I can manipulate it to place a value into that hidden column.
I read many posts about how data is stored in the fxx arrays. I've looked at my source and have seen values like f02, f03, f03_0004 and so on. So, I tried creating a report to display the contents of APEX_APPLICATION.G_F03(1). I created another report on the same page with the following SQL statement:
SELECT 'Code: '||apex_application.g_f03(1) F1
FROM DUAL;
When I run the page, the second report shows this: ORA-06553: PLS-221: 'G_F03' is not a procedure or is undefined.
Someone (I think Denes) suggest creating a process with the following PL/SQL to help locate the correct array:
BEGIN
wwv_flow.debug('******************************');
wwv_flow.debug('*** STARTING MY DEBUG HERE ***');
wwv_flow.debug('1: ' || APEX_APPLICATION.G_F01(1));
wwv_flow.debug('2: ' || APEX_APPLICATION.G_F02(1));
wwv_flow.debug('3: ' || APEX_APPLICATION.G_F03(1));
wwv_flow.debug('4: ' || APEX_APPLICATION.G_F04(1));
wwv_flow.debug('5: ' || APEX_APPLICATION.G_F05(1));
wwv_flow.debug('*** ENDING MY DEBUG HERE ***');
wwv_flow.debug('******************************');
END;
With that process in place, whenever I run the page I get an error that says ORA-01403: no data found. When I comment out the five lines that reference APEX_APPLICATION.G_Fxx the page runs, but I cannot see the remaining debug comments UNLESS I place the process to run before or after the Footer.
I hope that all makes sense.
So, what am I doing wrong about displaying the contents of the array that is storing the table?
Respectfully,
Leon

You can't reference a package variable in a SQL statement like you do in:
SELECT 'Code: '||apex_application.g_f03(1) F1
FROM DUAL;
You can only reference it in a PL/SQL block (like you did in a Before/After Footer process). If you try to use the variables before they are instantiated you'll get the no-data-found error.

Displaying Summary Column Values

I have just learned about summary columns in Developer 2000...But I can't complete the task...
I'd like to display the # of records for each value in the status column of my report. I have created the break group with Status column. Then I added a summary column choosing function: "count", source: Status, and reset at: g_status (at the group level).
What should I do next? I'd like to display counts of records (for each status value) in a separate field? How do I filter each status set? Do I need to create a separate summary column for each possible value of status?

Hello,
Is this what you are trying to achieve?
rows:
record_id Status
========= ========
rec01     Active
rec02     Closed
rec03     Pending
rec04     Active
rec05     Closed
rec06     Pending
rec07     Active
rec08     Closed
rec09     Pending
rec10     Active
rec11     Closed
rec12     Pending
rec13     Closed
rec14     Pending
rec15     Closed
output:
Active    4
Closed    6
Peding    5If so, you will need two groups, one for the Status, and another for the records.
Then, create a summary column in the status group of function 'count' and the source = record_id, and reset at g_status.
Then, in your report layout, have a repeating frame with source = status group.
Inside that repeating frame create 2 text items, one for the status text and another for the status summary.
-Marilyn

Spool ALV not displaying two column value

Hi,
In spool ALV is getting displayed. But the output is not printing the value of 2 columns , both are MATNR values. I checked the output table it is fetching the material number but ALV is not displaying it. please help its urgent. The GI material is not getting displayed.

HI Aparjitha,
As per the above screenshot I assume there should be only 2 possible cases as said by Jyoti. Apart from that there is no other chance of missing data, especially for couple of columns in the output.
If you are passing the value at run-time to MATNR and you are able to see that in output, hence your final internal table which you are passing to the ALV is not filled appropriately with MATNR values. May be those values are cleared somewhere.
It would be better if you could share some piece of your subroutine FIELDCATFILL code. Also place a breakpoint before ALV display and check if the fieldcatalog and the final internal table are having the appropriate values.
Regards,
Naresh

To display the column value though it is null

Hi all,
lineItems.ShipToCustomer.VName is having null in this case
When I execute this query I get zero records returned,the problem lies in lineItems.ShipToCustomer.VName :
select lineItems.ShipToCustomer.VName,C.VDealNumber CPRNumber, W.created SubmitDate, lineItems.VLineID LineItemNumber,lineItems.VProduct.Description Product from com.eastman.pricing.CprForm C,com.vendavo.platform.workflow.VWorkflow W where C.objectId=W.VWorkflowEntity.objectId and VID = 'CPR-013005'
When I execute after removing lineItems.ShipToCustomer.VName then the query returns one record:
select C.VDealNumber CPRNumber, W.created SubmitDate, lineItems.VLineID LineItemNumber,lineItems.VProduct.Description Product from com.eastman.pricing.CprForm C,com.vendavo.platform.workflow.VWorkflow W where C.objectId=W.VWorkflowEntity.objectId and VID = 'CPR-013005'
One more observation is when I include the column as lineItems.ShipToCustomer i.e after omitting only vname then I get one record returned.ShipToCustomer is a vector field.Anything to do with vector.
How do I get one row returned even though the lineItems.ShipToCustomer.VName is included in the query?
Thanks in advance

This query is specific to the project i'm working it is called VQL which mostly follows the SQL standards that is why i'm not able to use nvl() which is not implemented in VQL....
The problem which i'm facing i have explained below:
lineItems.ShipToCustomer.VName is having null in this case
When I execute this query I get zero records returned,the problem lies in lineItems.ShipToCustomer.VName :
select lineItems.ShipToCustomer.VName,C.VDealNumber CPRNumber, W.created SubmitDate, lineItems.VLineID LineItemNumber,lineItems.VProduct.Description Product from com.eastman.pricing.CprForm C,com.vendavo.platform.workflow.VWorkflow W where C.objectId=W.VWorkflowEntity.objectId and VID = 'CPR-013005'
When I execute after removing lineItems.ShipToCustomer.VName then the query returns one record:
select C.VDealNumber CPRNumber, W.created SubmitDate, lineItems.VLineID LineItemNumber,lineItems.VProduct.Description Product from com.eastman.pricing.CprForm C,com.vendavo.platform.workflow.VWorkflow W where C.objectId=W.VWorkflowEntity.objectId and VID = 'CPR-013005'
One more observation is when I include the column as lineItems.ShipToCustomer i.e after omitting only vname then I get one record returned.ShipToCustomer is a vector field.Anything to do with vector.
How do I get one row returned even though the lineItems.ShipToCustomer.VName is included in the query?

How to display a column value with in string?

Hai all,
Select name from TAB1;
output: JAGAN
            RAMU
            SIVA
            Sanjay
So my requirement is to display these data in string(With in single Quotes) like below.
           ' JAGAN'
            'RAMU'
           ' SIVA'
            'Sanjay'
Let me know if it is possible.......
Thanks in Advance.....
Jagadekara Reddy

Like this ,
SELECT ''''||ENAME||'''' FROM TAB1;
Cheers!

Display Column Value Once

Hey,
I am trying to only display a column value one time for a record, not a static value. The value changes and there can be many values. I do not think grouping will work since the Date value is dynamic. I am using Oracle for Toad 10.5. There are 4 records with this test data.
select Date, Person, Language, Country
from TableA
TableA
Date            Person Language   Country
01/25/2013       James   English
12/20/2012       James   English
                                     US
                                     AFWould like to only display
Date            Person Language   Country
01/25/2013       James   English
12/20/2012
                                     US
                                     AFThanks for reading this thread!
Edited by: Nikki on Jan 7, 2013 1:08 PM

Hi,
You can use the analytic ROW_NUMBER function to see if a given row is the 1st row in a group, and only display the person and language columns when it is:
WITH     got_r_num     AS
     SELECT       dt          -- DATE is not a good column name
     ,       person, language, country
     ,       ROW_NUMBER () OVER ( PARTITION BY person
                                  ,          language
                           ORDER BY          dt
                         ) AS r_num
     FROM      table_x
SELECT       dt
,       CASE WHEN r_num = 1 THEN person   END)     AS person
,       CASE WHEN r_num = 1 THEN language END)     AS language
,       country
FROM       got_r_num
ORDER BY person, language, dt     -- If wanted
;Your front end may also have a way to hide those values when you want. The BREAK feature in SQL*Plus does this; I don't know if Toad has anything comparable.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) where the query above produces the wrong results, and also post the right results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ {message:id=9360002}

Single query for displaying all but 1 column values for all tables

Hi,
All the tables have SYS_CREATION_DATE column.
But I dont want to display this column value
Can someone suggest some way in which i could achive this?
Oracle version:11gR1
OS:SunOS
Cheers,
Kunwar
Edited by: user9131570 on Jul 6, 2010 7:57 PM

user9131570 wrote:
@Tubby
I *want to display table-wise the values of all but 1(SYS_CREATION_DATE) columns in my database.*
I need this in order to compare it to another database for all these values .Let me make a wild guess at what you are getting at.
Given these two tables
create table emp
   (empid number,
    empname varchar2(15),
    empaddr   varchar2(15),
    sys_creation_date date);
create table dept
   (deptid number,
    deptmgr varchar2(10),
    sys_creation_date date);you want to somehow combine
select empid,
         empname,
         empaddr
from emp;with
select deptid,
         deptmgr
from dept;into a single sql statement?

Want to disable display of column values in Selection Panel (11g)

Similar Messages

Maybe you are looking for