Want to Display Sales Orders

I want to create a Web Dynpro that will display Sales Order Information. Not sure what I want to use as my selection criteria yet. Perhaps Partners, or Customer Numbers. Does anyone have any suggestions? Like, some good Class Methods I can use in a Service Call for accomplishing this.
Thank-You.

Try these FM's
SPP02_SALESORDER_GET           gets salesorder header and items.
BAPI_SALESORDER_GETLISTBOS     Sales Order with BOS: List of all Orders for Cus
SALESORDER_GET_SERIAL_NUMBERS  Get serial numbers of a given sales order       
BS01_SALESORDER_GETDETAIL      Sales Order: Display Order Data of Order        
BS01_SALESORDER_GETLIST        Sales Order: List of all Orders for Customer    
ISIDE_RLOEPM_SALES_ORDERS_READ Get sales orders for given accounts
Hope it works.

Similar Messages

  • Display sales orders due list in a week

    hi , i want to display sales orders due list in a week
    what are the tables need to be referred?
    Rgds
    Umakanth
    Edited by: Alvaro Tejada Galindo on Feb 21, 2008 5:06 PM

    Hi,
    The following is a list of Sales & Distribution tables :
    VBBE Sales Requirements: Individual Records
    VBEH Schedule line history
    VBEP Sales Document: Schedule Line Data
    VBFA Sales Document Flow
    VBLB Sales document: Release order data
    KONV Conditions for Transaction Data 
    KONP Conditions for Items 
    LIKP Delivery Header Data
    LIPS Delivery: Item data
    VBAK Sales Document: Header Data
    VBAP Sales Document: Item Data
    VBLK SD Document: Delivery Note Header
    VBPA Sales Document: Partner
    VBRK Billing: Header Data
    VBRP Billing: Item Data
    VBUK Sales Document: Header Status and
    Administrative Data
    VBUP Sales Document: Item Status
    VEKP Handling Unit - Header Table
    VEPO Packing: Handling Unit Item (Contents)
    VEPVG Delivery Due Index.
    Hope this might help you.
    Regards,
    Kaveri.

  • How to get display sale order in MB51

    Hi,
    How we can get display sale order in mb51 , at present only sale order with special stock "E" is been display .
    Thanks..

    HI,
    if you just want last / latest SALES ORDER for material then check table VBAP
    if last billing document then check table VBRP
    check MCBE
    Prese F6
    there you can select the columns
    Last consumptn.
    Last gds issue
    Last gds mvmt.
    Last Receipt
    VA05- Report for the sale with Material Vs Customer. or
    You can easily get that in VBAP by putting the material number for MATNR
    for more clarity please refer the below link...
    How to findout last sale transction date of perticular material
    Regards,
    Udaya.

  • Display sales order in to form

    Hi Gurus,
    I able to display sales order based on the customer number i passed from the input text field and the result list will display in a table.
    Now If i select specific sales order from the table row , I want to display that sales order on a seperate iView with all the detials of perticular sales order.
    Please guide me how to achieve this task.
    Mark Peter

    Hi,
    If you are using the two function modules  for retriving the list of sales orders and detail sales order.
    First you have to add two function modules in the custom controller and pass the first function module into first view and it displays the sales orderlist as table
    In the table when u click the specific salesorder capture the sales order and pass this is as input for secnd module that function module execute method will call in the OnLeadselection and navigation and result will display output in anothe view.
    This the way generally doing.
    If you want both views in inthe same window as Anil suggested take View set and design both views and hide second view at the loading the application.
    when you click the record on the table then display the detail in seond veiw and display it on the same window.
    This might helps you other wise post ur issues.
    Thanks.
    Lohi.

  • CM25--display sale order number

    Hi all
    With transaction code: CM25 and overall profile: SAPSFCG011. We can display: Planning Table: SAPSFCG011 Finite scheduling forw./all functs.activ. 
    then there will be three sections, in the left of the bottom section "orders (pool)", there will be disaplay field "Sql" material" "Prio" "order" "operation" "work center" etc. but I would like to display "sale order number", because our production style is make to order. so when planner pull the production order and dispatch it, the planner needs to know the sale order number. Could be sale order number displayed here?
    thanks in advance!
    DanDan

    This is entirely possible... please see my post from a previous post with a similar question... what you would need to do is add field KDAUF (for planned orders) or field KDAUF_AUFK (for production orders).
    The configuration for manipulating the profiles and columns is a bit confusing in the IMG.
    However.. if you use transaction OPD0 you can open up the configuration for the default profile that you are using in production. For instance... overall profile SAPCRPG001 uses planning table profile SAPSFCL010. If you click the button to the right of the planning table profile entry it will take you to the planning table profile configuration screen. Double click on profile SAPSFCL010.
    In this transaction you will note there is an entry for Layout ID which is (if you have not changed the default config) SAPSFCLA10. If you click the button to the right of this entry it will take you to the list of Layout ID's available for you. Locate the Layout ID SAPSFCLA10, select it and double click on the "Definition of charts" option.
    In this case the graphical planning table is using three different sections. Select the section that you wish to manipulate the column headings for and double click on Grouping Names option. Select the option that shows up in the next screen then click on the Grouping Names option.
    Listed here should be the layout keys used in this section of the layout ID. Make note of the layout key(s). Execute transaction CY38. Input the Layout Key you wish to manipulate. From here you can select any field you would like to add/remove from the current listing.
    You can click the Sequence/Heading button to manipulate the specific order of the columns and how large you want those columns to be as well as what text is displayed as the heading.
    My suggestion if you are going to make changes like this is to copy the existing profiles to Z********* profiles so that you have a golden copy to work with.
    Hope that helps.
    Rachael

  • How to devolped an Interactive ALV Report to display sales orders

    hi,
             how to devolped an Interactive ALV Report to display sales orders pertaining to the selected Customers and item details in the secondary list.For this report what are the tables and fields wehave to used give with example.
    thank you
    radhakrishna

    Hi,
    look via se38 for BCALV* and SALV*.
    Try ABAPDOCU.
    Regards, Dieter

  • Requied code in abap to display sales order header text

    hi all,
    can anybody help me to send the code in abap to display sales order header text.

    Use FM, Read_text. Pass the necessary parameters like object name, id, language. You can see some of the infos in by clicking the scroll-like button.
    Reward points if useful

  • Display  Pop up message when  changing and displaying sales orders?

    Hi Friends,
    My client requirement is to display text popup during change sales order VA02 , and  Display sales order VA03.
    Pls find me a answer for this , Thanks.
    Nina.T

    Hello Nina...
    Hope you are aware of the configurations you need to maintain for the Text determination.Anyway, herewith are the steps that may help you to accomplish your requirement.
    Text Determination procedure for sales document header:
    Text can be determined at sales document header level or it can be imported from customer master. The process is...
    Define Text types: Path: Imgsales and distributionbasic functionstext controldefine text types
    Select sales document header. click on text types go to new entries and define text types. For Eg:Z1
    Define Access sequence:
    Select sales document header
    Click on change icon
    Click on access sequence control button under dialog structure
    Go to new entries and define access sequence number with description.Ex: 55
    Save it and exit
    Define text determination procedure:
    Go to new entries
    Define text determination procedure.Ex: ZX save it and exit
    Assign text id's to text determination procedure:
    Select your text determination procedure(ZX)
    click on text id's in text procedure control button under dialog structure
    go to new entries and maintain entries. Text id:assign text id (Z1) that we defined in the previous step
    Specify sequence No-10
    Check Reference: this indicator specify that the text is reference or copies from preceding object
    Text in obligatory: text will be displayed during copying. the value of this field specifies whether text is obligatory or not and if it is obligatory the how it is to be displayed
    Apart from this... you also have to maintain the text in the Customer master as mentioned in the previous mail..
    Thanks,
    Safeer Rahman

  • Creditreport that displays Sales Orders with Material Availability Date as

    Hi
    I need input if the following requirement can be met in FSCM credit mgmnt.
    Currently In FDK43 there is a total sales figure that represents the Sales that are consuming the Credit Limit assigned to the customer, unfortunately there is no drill down on this number to see which sales orders are responsible for the consumption of credit
    Do we have any sales report that displays Sales Orders with Material Availability Date as an output in conjunction with Credit limit .

    Not in standard provided. Custom program is required.
    Regards
    Hein

  • Displaying sales order from other system

    Hi Experts,
    I have a requirement of displaying sales order from other system. I will be fetching sales orders through a RFC call and displaying it in an ALV. on clicking of the sales order displayed from the ALV, I need to display it from the other system.
    How can I go about this?
    Please help.
    Regards,
    Rohan

    rohan,
    you already have answered most part of your question.
    - displaying SO from other system through RFC:
    create a remote enabled function in that target system. call this FM from your current system. (for RFC calls check this: [RFC help|http://help.sap.com/saphelp_nw04/helpdata/en/22/0425f2488911d189490000e829fbbd/content.htm]
    displaying SO by double clicking in ALV:
    --ALV's comes with a event USER_COMMAND. in this event you can pass your subroutine and in your subroutine you can do your coding... take help from sdn searches like :About FM ALV user_command Event
    hope these helps
    Somu

  • A query to display sales orders with corresponding outbound deliveries

    Hi Experts,
    Don't know if this is the right place to post the question but i would like to know if a query, in SAP, can display sales orders with their corresponding outbound deliveries, i tried using table LIKP and VBAK, VBKD didn't help. the whole idea is to enter any specified sales order number and the query will return any outbound deliveries belong to the sales order.
    Thanks in advance!

    run the se16 transaction - table VBFA.
    This table gives the Sales document flow.
    Give the sales order nos. and in the subsequent document category select delivery.
    You will get all deliveries.
    Thanks
    Ajay

  • What tables we have to include  to display sales order for paricular order

    what tables and fields we have to include  to display sales order for particular order and paricular customer?

    Sales order detials are stored in VBAK ,VBAP tables,
    U can have selection screen for customer, and upon entering the customer name, u can extract the data from the above two tables.
    Regarding order, is it Purchase order? if so, u cant extract based on perticular order, coz, these orders are not generated in SAP, they come from Customer and can be registered in Sales order for only reference.
    Regards,
    Sujatha.

  • Display Sales Order Result List for a customer from ECC

    Hello Experts.
    I have a requirement to display list of sales order posted for a particular date or sold-to-party or ship-to-party.
    System landscape is as below:
    My ECC system  holds all the data. Orders and subsequent documents are created here.
    My CRM system does not have any Sales related data stored on CRM system.
    Client requires to search for sales orders created for a customer.. based on few search parameters. and display the result list.
    From the Result list,Navigate to see the Over View page, Also, with partner information and material information as assignment blocks.
    How could i achieve this?
    Another Point is we do't not want to create or Edit or even Display ERP Sales Order on UI.
    We want to have UI look.
    Kindly, if someone has implemented this scenario or used standard CRM objects to achieve this functionality please share.
    Thanks

    Hi Nageshwara,
    You need Lean Order(LORD) Interface set up for such kind of requirement.
    There should be a trusted RFC Destinations needs to be set up in the CRM system and an ERP Profile to be set up in the IMG Path CRM --> Transactions --> Settings for ERP Transactions Maintained via CRM ---> Define Profiles for ERP Sales transactions. If these things are properly setup you can use the component ERP_S for searching for Sales Order in ECC using the criteria that you mentioned in your question.
    Regards,
    Mahesh

  • How to display Sales Order Document No into Invoice  ALD document

    Hi everyone
    I need to know how to bring in the sales order number into a UDF on a sales invoice which i will then pull into the invoice document using ALD.The client creates a sales order and copys into a delivery and THEN copys into an Invoice therefore it loses the original base number
    SBO only displays the delivery number into the invoice and the sales number in the delivery - it will not take the sales order all the way into the invoice.
    I can see that it brings it into the remarks field but this also brings in text, which i dont want displaying in ALD document.
    can anyone help either with a formatted search or if you know how i can strip out the text from the remarks field.
    any suggestions will be much appreciated
    Thanks

    You can use the next query:
    Select o.DocNum
    From DLN1 d
    Join ORDR o On o.DocEntry=d.BaseEntry and d.Linenum=0
    Where d.DocEntry=$(INV1.BaseEntry)
    (You should replace the ')' with '']' and the '(' with  '[')
    But this is usable only when the user derives the invoice from one delivery and the delivery from one order.

  • Display sales order without using VA03

    Hi,
    VA03 t-code is used to display a sales order in SAP. Please let me know if there are any other ways exist to display a sales order.
    A quick response is appreciated.
    Regards,
    Bijay Achary

    Let me rephrase my question again..
    Actually I am going to implement one User exit for automatically determination of Terms of Payment. I wanted this user exit to be hit for sales order "Create" and "Change" mode, but not for the "Display" mode.
    Hence I wanted to make sure that apart from VA03 t-code, are there any other way to view the sales order in "Display" mode.
    Thanks,
    Bijay

Maybe you are looking for

  • Multiple Account Assignment issue with BAPI_PO_CREATE1 for service POs

    Whle creating service PO through BAPI_PO_CREATE1, The account assignments at the service line items were not being added correctly at the item level, instead they are getting split further wrt tax jurisdiction. This is occuring when an item have mult

  • Ipod Not Popping Up On iTunes.

    Okay, so I plugged my Ipod into my USB port, and opened up iTunes, but my iPod didn't show up where it is suppose to be. I've had this iPod for a year now, and this never happened. I can't sync my iPod or do anything with it. Can anyone tell me how t

  • Error creating groups in SCSM using PowerShell

    Hello Everyone, I am trying to create a bunch of groups and queues within SCSM to seperate work items and CIs from different customers. For example, I have started off by entering the console and creating a group called "Company 1" in my groups (foun

  • Why can't i get or use or install Windows Live Mes...

    Can i please somehow get Windows Live Messenger on my C7?I don't wanna use Nimbuz or Ebuddy etc,tried those but don't like them,too much hassle,need help please.

  • Lost Homeshare Icon...easy fix hopefully?

    Small problem. I inadvertantly said no thanks to the homeshare facility and the icons on the playlist dissapeared. how do i get them back please as I want to share the library on my daughters laptop upstairs?