Want to do mass processing for inspection lots with status SPRQ

Hello,
My company using early lot creation for 04 inspection type. We have thousands of inspection lots with status "UD   ICCO SPRQ PRII PRSI STUP". Now due to SPRQ status, system is not closing process orders associated with thousands of inspection lots.
Is there any transaction where I can do mass processing of inspection lots to change the status "SPCO" from "SPRQ"?
Thanks
Bhavesh

Dear Bhavesh
You may have to modify the standard program to do so. Modify this program RQEVAI30.
This can help you
Regards
gajesh

Similar Messages

  • Searching for inspection lots with a specific result

    Hi,
    Is there a way to search for an inspection lot or point containing a specific result?
    Like show me all the inspection lots where characteristic "color" is entered as "red"
    thanks,

    Hi Alper,
    To get it for specific material, there is an STD report available.
    Try QGP1.
    Regards,
    Shyamal
    Edited by: Shyamal Joshi on Jan 2, 2009 7:00 PM
    Or there is an other way also but for that thing you need to strictly follow the below steps, without fail.
    - Go to any inspection lot (T Code QA13) where this MIC's result is recorded. Ideally UD should be completed for this lot.
    - In the "Characteristic" screen click on the "Chars relevant for usage decision", so it will display you all the results.
    - Now click on the appropriate MIC. e.g. click on the MIC "color".
    - Now click on the Result History or "Cntrl+F9".
    - A small selection window will pop-up.
    - Here there will be two main selections are available, 1> with Inspection Char. and 2> with Master insp. char.
    - We need to "Master insp. char." activated (GREEN)
    - Now at lower part of this screen there are four sub selection tabs such as Material, Object, Inspection lot, & time are available.
    - In all the tabs a check box "Selection Active" is available, deactivate it.
    - As soon as you deactivate it, the selection criteria will change into Yellow colored triangle.
    - Noe Execute this selection.
    - It will give you the data as you are looking for.
    Pls revert if there is any query.
    Regards,
    Shyamal

  • Inspection Lot with status CHCR

    Hi,
    I am facing following problem in QM -
    I have maintained inspection type 03 & 04 in Inspection Set up for a raw material master. When I create PO & receive material against the PO, the inspection lot is created & material is posted to inspection. The lot has following status:-- CHCR Characteristics must be created. Here the system does not allow me to post the usage decision for the lot & I am unable to post the stock to unrestricted use.
    Pl. suggest if anyone knows the answer
    Regards,
    Prashant Kolhatkar

    Hi,
    Did you go for Change inspection result before changing usage decision,
    if not go by the fallowing process.
    Menu bar-> Goto->change inspection lot
    Put the Inspected qty, results, Origi insp data, insp desc,
    click on lock tab and Accept the results.
    Then go for change usage decision and accept.
    Quality inspection results will be updated in the system and stock will be moved to respected stock type
    Regards
    Sanjay L

  • 04 inspection lot with status SPST

    Dear Experts,
    We are using Handling Unit (HU) functionality in FG material,
    1. We create HU's (say 50 HU's) using tcode COWBPACK,
    2. On creation of HU, an inspection lot of type 04 is created for 50 HU's.
    3. In regular scenario, we do GR of all 50 HU's using tcode COWBPACK,
    4. All 50 HU's are posted in to unrestricted & UD is given using tcode QA32 & status UD SPCO.... is updated in inspection lot,
    5. The HU posting in unrestricted can be happen before GR also (which observes no problem),
    But in rare scenario, we need to cancel / delete the some of HU's at that time following steps are involved -
    1. We create HU's (say 50 HU's) using tcode COWBPACK,
    2. On creation of HU, an inspection lot of type 04 is created for 50 HU's.
    3. HU posting in unrestricted is done for 45 HU's (System status SPST is updated in inspection lot),
    4. Balance 5 HU's are deleted from system using tcode HUMO,
    5. UD is given to inspection lot & status UD SPST.... is updated in inspection lot.
    Now the problem is, after settlement & variance calculation of production order when we try to update status CLSD (Close) in production order the system give an error "Inspection lot 040000XXXXXX for order XXXXXXXX has not yet been completed" this is due to system status SPST is there instead of SPCO.
    As the 5 HU's are deleted hence the stock posting can not be completed. Even we can not cancel the inspection lot due to status SPST.
    Please suggest how to resolve this issue to update the status CLSD in prodction order.
    Thanks in advance,
    Leena.

    See if these OSS notes help you
    Note 622758 - Stock posting cannot be completed (HU)
    Note 532946 - HU lots: Status SPST f.stock proposal in usage decision code

  • Cancellation of Inspection Lot with Status LOLK

    Lot with Origin 08 has the status "ICCO SPCO BRRQ LOLK". Stock has been scrapped through movement type 713 from the quality inspection area but the lot is still is displaying in QA32.
    When we are trying to remove the status LOLK through QA12 system is not allowing to enter into screen and giving message "This function cannot be carried out."
    How to cancel or remove this lot?

    Hi,
    status LOLK means Lot locked for batch record
    So go to QA32 and select the relevant inspection lot and go to the Usage decision tab.
    Click the menu bar " Usage Decision" and go to
    Functions-block for batch record---deselect
    Then save the lot and come again  to functions--- cancel the lot.
    By doing this you can cancel your lot
    How to cancel or remove this lot?
    Hope your problem will sorted out
    Give a try and confirm
    Regards
    Hari

  • Inspection lot system status shows  CRTD PASG

    While running Calibration scenario in PM , Order generated with inspection lot.
    But when we go for Change data for inspection lot system status shows  CRTD PASG, its not in released state.

    Hi
    Pl check ur task list has been assigned to maintenace plan
    Once u assign U will be need to manualy release the Inspection lot by using QA02.
    You can go to QA02 and in the inspection specification Tab click on Task list push button , You may have to change the key date adjacent to the push button in same tab to say today's date. Since the specs are not got assigned to it.
    Now go to sample tab and click on calculator.
    Save your transaction Lot will be in REL state.
    Regards,
    Nitin

  • Quality Management - Insp lot with status CRTD CHDR SPRQ

    I am not able to do usage decision for Insp lot with status CRTD CHDR SPRQ but I can do usage decision for status REL CALC SPRQ.
    Can anybody know why ?

    Hi
    pl check the lot is assigned for inspectioon plan ore not.
    got QA02 check in inspecion specification TAB.
    If there is noe inspection plan (group)
    you need to create a inspection plan, and then come to QA02
    then you need clickon TAsk list/spec button in insp.specification tab.
    Pl check and try
    -ashok

  • Inspection lot with 01 origin for stock transfer (Intra company STO)?

    Hi Sap Gurus,
    As per standard SAP configuration for 101 movement type, 08 is the inspection type used for stock transfers (Intra company STO). But, there is a requirement from business to use 01 for Intra STO. Is it possible to get an inspection lot with 01 origin while GR to the delivery created for Intra STO ( Stock transfer B/n plants from same company code)?.
    Thanks in advance
    Venkat V

    Hi All,
    Thanks for your replies..
    Its STO Purchase order between two plants under same company code. System triggers movement type 101 with movement indicator B - Goods movement for Purchase order and Receipt indicator X - Stock transport order. Here system expects inspection lot origin 08 as per standard SAP configuration(OMJJ).
    I just wanted to check, is it possible to get inspection lot from 01 origin for this type of stock transfers. If anyone who worked on this area, please share your inputs. 
    Thanks in advance
    Venkat V

  • BAPI for Inspection lots

    Hi,
    I'm executing the following steps in development:
    Goods Receipt
    (Transfer Order Creation)
    Transfer Posting
    (Transfer Order Creation)
    The goal is to receive the goods in an "external" Storage Location and then repost it in an "internal" Location. The TOs are automatically generated per Customizing of the Movement Types.
    I'm using the BAPI  BAPI_GOODSMVT_CREATE.
    In case of automatical Inspection Lots (Material master, view Quality management) the Express document lands in my Wokplace Inbox with the following error message:
    Error during creation of transfer orders for material document 5000002931
    Date: 10.03.2009
    Time: 13:13:42
    Transf.reqmnt CP1 8000000325
    TRs relevant for inspection lots cannot be processed using this func.mod.
    By pressing 'Ctrl + F6', you can directly trigger subsequent processing
    Is anyone aware of the BAPI, which will work with the inspection lots?
    Thanks,
    Taras

    Hi,
    you should be able to create inspection lots when executing                 
    BAPI_GOODSMVT_CREATE. See for example the attached note 536769 that         
    is about wrong status in the inspection lot created in this way.                                                                               
    Please review your data used for testing this BAPI. 
    Best Regards,
    Arminda Jack

  • Inspection lot with stock tab for sale return from customer.

    Dear,
    In our organization there are two scenarios,
    1)     Make to order- Strategy group -20
    2)     Make to stock- Strategy group -10
    I have maintained 05 inspection types in QM view for sale return inspection from customer.
    1) In make to order scenario Inspection lot created with inspection stock tab which is OK.
    2) But in make stock scenario no inspection lot is generated.
        Remember I donu2019t want inspection lot without inspection stock tab as per insp. type-06
    So please suggest me, what can I do for getting inspection lot with stock tab for make to stock scenario.
    Regards
    Shabbir Kureshi

    Hi
    QCC0>Quality inspection>Inspection lot creation>Inspection for shipping>Assign Inspection Lot Origin to Delivery Type-->aganist delivery type Enter 05 inspection lot origine
    Also in OMJJ check whether QM in active for mnt type 651
    Regards
    Sujit

  • Manual Inspection Lot for Inspection Lot Origin '04'

    Dear SAPians,
    We are presently getting Automatic Inspection lot with the Closing of Process order against Inspection Lot Origin '04'. Now there is a requirement came to generate Manual inspection lot against Inspection Lot Origin '04' but System is STOPPING US and giving an Error Msg. You Cannot Enter A Material  for the Specified Origin. I feel that there is some customizing issue. Please suggest.
    Thanks

    Yes Atul,
    The system is correcting you, remember the 04 type lot triggers in reference to the Order!!!!
    So don't enter the Material, just enter the Plant and inspection type i.e. 04 and press enter in QA01 trx.
    The system will ask you for the Order number.
    NOTE:- This will be manual lot (Other inspection), so will not have the stock posting tab at UD, though it will have number range of 04.............
    Regards,
    Shyamal

  • Certificate creation for inspection lot

    Dear all,
       Is it possible to create test certificate for inspection lot of type 04. what is procedure to create this test certificate.
    Thanx & regards,
    Harish Parab.

    Hi Harish,
    You can generate an inspection certificate for the inspection lot generated for 04 insp type.
    U need to use QC21 Certficate for inspection lot transaction ( U can search the lot for ur production order)
    Basic steps to be done
    1. Create certificate profile
    2. Assign profile with out any recipient.
    3. Generate certificate
    Regards
    Venugopal

  • Bapi or FM to read data for inspection lot

    Hi Experts
    I need bapi or FM that will read all specifications and result value for entered inspection lot
    the data that we also got in transaction qa13
    I need exactly that data
    Thanks
    Taran

    hI,
    Check the below bapi's
    GetDetail : Load detail data for inspection lot [ BAPI_INSPLOT_GETDETAIL ]
    GetList : Select inspection lots [ BAPI_INSPLOT_GETLIST ]
    GetOperations : Select inspection operations for inspection lots [ BAPI_INSPLOT_GETOPERATIONS ]
    SetUsageDecision : Make automatic usage decision [ BAPI_INSPLOT_SETUSAGEDECISION ]
    StatInterface : QM-STI Interface [ BAPI_INSPLOT_STATINTERFACE ]
    Reward if helpful.
    Regards,
    nagaraj

  • What is the IDOC for Inspection Lot Edit

    Hi All,
       What is the IDOC for Inspection Lot Edit and Cancellation in QM module?
    Thx&regards,
    Khaja.

    Check these..
    in TCode: we30
    ->INSPECTIONPLAN_CREATE01
    ->MATQM01
    ->QPMK01
    Regards,
    Ramesh.

  • What is the BAPI for Inspection lot change - QA02??

    Hi Guys,
    Can anyone tell me plese, What is the BAPI for Inspection lot change - QA02?
    Thanks

    Hello,
    This BAPI suppose to be able to do that for you:
    BAPI_INSPLOT_SETUSAGEDECISION
    Best regards,
    Marcin

Maybe you are looking for

  • My ipod nano 7th generation is connected and recognised by my new windows 8 laptop but not recognised as a device on itunes

    Hi.  Can anyone help please.  I have downloaded all my music onto my windows 8 laptop. I have tried to sync my ipod nano but am unable to select 'sync' under 'devices' - doesn't allow me to do so.  Ipod is connected and recognised by my laptop.  Help

  • Dropship Process - Account assigned PO with Freight

    Hi Experts Scenario - We have a process defined for third-party drop ship with PO Account assigned to 'Y - 3rd Party W/O SN' and to a GL account based on this account assignment.  We have an automatic price determination for a condition type for 'Dro

  • FTP can access through URL?

    Hello All, My client wants to access the FTP server through URL. Which adapter i need to use FILE or SOAP to send or receive the data. Thanks and Regards, chinna

  • IMac 27" Static Noise through external monitors

    Hey, I recently bought a 27" iMac and I'm running a pair of Yamaha HS50Ms out for monitoring audio recording. When I'm not playing sound the speakers output static from the computer (presumably hard drive noise or something?). It's especially noticea

  • Onclick event in flash

    Hello, i have an flv  movie file that i need to convert to swf and add an onclick event to  it. i was able to do the first step by importing the flv movie and  export it as swf. how can i add the onclick event? this swf will be an  advertisement for