Want to do PhD in SAP /ERP System / Managment Information System

I want to Full time PhD in SAP / ERP System / Management Information System in SAP Related Area with scholarships.I have done Master of technology in Information technology from Jadavpur University ( india).I have 2 years I.T experience in I.T and Academics if you can give any helpful information on that I will be grateful to you.
Thanks
Sayanta Mallick

Hello,
As an active UA member, we are interested in supervising PhD students in SAP related areas (Business Intelligence in my own case). Please be aware that, as a student, your PhD would need to have a focus on the challenges and issues in the area (many are noted in both the threads on the Community Network) and not on SAP technology per se - though you may well use SAP technology or additions to it to develop/demonstrate solutions to issues and challenges.
We offer full and part-time study options and details can be found at the following URL:
http://www.brunel.ac.uk/about/acad/siscm/disc/pg/phd
I do not mean to use this as an advert for my institution in particular - as noted in other posts there are many choices open to you.
Mark Lycett
Professor of Information Systems Development
School of Information Systems, Computing and Mathematics
Brunel University, UK.

Similar Messages

  • Error while reading the PO in the Backend system. Inform system admin

    Hi All,
    We are having a peculiar issue of 'Error while reading the PO in the Backend system. Inform system admin'.
    The P.O is in ordered status in SRM but the same is not getting transferred to backend ECC system.
    No error messages or logs in RZ20, SLG1 any where.
    All programmes like BBP_GET_STATUS_2 and CLEAN_REQREQ_UP are running fine.
    Tried pushing the P.Os manually using function module (BBP_PD_PO_TRANSFER_EXEC_V2) to backend ECC.
    It was working fine till a week ago and suddenly this problem is coming.
    We had implemented few OSS notes suggested by SAP for the issue of 'shopping carts appearing in sourcing cockpit even after P.O creation' in both development and test system.
    Now this issue is coming up in test system where as development system is working fine.
    Please let us know where to look and how to resolve this issue.
    A quick response would be highly appreciated.
    Regards,
    Teja

    I am facing the same issue with one PO in the Production system.
    SRM 5.0 , R/3 4.6C Extended classic scenario.
    I checked the status of other PO's created today. I see them in R/3. There is one PO which was created a week back which shows up as "ordered" in SRM but the PO is missing in R/3. When clicked on the details on the web, system throws the error
    Error while reading the PO in the Backend system. Inform system admin.
    Message no. BBP_CF010
    I checked RZ20, SLG1 no errors were found. I checked RFC connection, it was working fine too.
    I tried pushing the PO using the FM BBP_PD_PO_TRANSFER_EXEC, it did not solve the problem.
    In SRM WEBGUI Process PO - Item data -->follow on documents --> PO status is shown as Archived.
    Any inputs would be greatly appreciated. Please throw some light on this issue.
    Krishna

  • Travel management information system

    I everybody,
    I’ve got a problem when I use transaction : "S_AHR_61016407 - Find Documents Using Maximum Rate" in the Travel Management Information System (or any other transaction dealing with maximum rate).
    Our customizing seems OK :
    We have defined exceeding rates and if the expense exceeds the maximum rate, we have defined that a warning message must be shown (code “C”).
    When I enter a travel expense (PR05) with an exceeding rate, I can see this message.
    But when I try to see which travel expenses exceed the maximum rate, nothing is selected (I select “C” in the “Limit exceed” zone).
    I tried a Quickviewer on table PTRV_SREC and the field “ABOVE_LIMIT” is empty.
    I have found no OSS notes about this problem.
    Do you know something about it ?
    Many thanks.

    NITHIYASEELAN ,
    QMIS is basically deals with kind/types/ of data updation that takes place in the system
    Pls go through these links for detailed understanding
    http://help.sap.com/erp2005_ehp_02/helpdata/en/8c/fd5872a94711d1890a0000e8322f70/frameset.htm
    Reward points if useful
    Regards,
    SVP

  • QUALITY MANAGEMENT INFORMATION SYSTEM

    hello guru
    kindly explain  what is quality management information system.
    i will be really thankful if u can send me the detail step by step procedure along with t codes
    thank u
    [email protected]

    NITHIYASEELAN ,
    QMIS is basically deals with kind/types/ of data updation that takes place in the system
    Pls go through these links for detailed understanding
    http://help.sap.com/erp2005_ehp_02/helpdata/en/8c/fd5872a94711d1890a0000e8322f70/frameset.htm
    Reward points if useful
    Regards,
    SVP

  • How to discable password change in SAP ERP (or any ABAP system)

    Hello,
    We have password synchronization between Sun Identity Management system and SAP ABAP systems. This ensures that the password is identical between the network ID and SAP ID. In order to avoid any issues, we would like to disable the ability of the users to change their password in the SAP system directly (on the initial logon page). This forces the users to go through Sun Identify Management system for resetting the password (desired behavior). Can you please suggest if there is a way to do this. I remember seeing an OSS note that meets the requirement a couple of years ago but now I can't find it.
    Thanks
    Sri

    Hi Sri Vandan,
    Please check note number: 379081 if it helps for you.

  • Cluster for SAP ERP 6.0

    Hi,
    My enterprise plans to use SAP ERP 6.0. System will it is torn on a cluster from 2 nodes. As OS we plan to use Windows 2008 R2. For cluster development I use the document "Installation Guide SAP ERP 6.0 - EHP4 Ready ABAP on Windows: Oracle
    (Based on SAP NetWeaver 7.0 including Enhancement Package 1) ".
    In chapter 7.3.4"Installing the Central Services Instance for ABAP (ASCS)" for creation of cluster group it is underlined:
    k) Right-click the service and application SAP <SAPSID>.
    l) Choose Add a resource Add File Server.
    m) Double-click New File Server.
    n) In the New File Server Properties window, change the Resource Name from New File Server into SAP <SAPSID> FileServer.
    Problems in that in the parameter list "Add File Server" in the menu "Add a resource" is not present. The server possesses such role, nevertheless "Add File Server" in the list misses.
    How to me in that case to fulfill requirements on creation service and application SAP <SAPSID>?
    P.S. All updates on ноды a cluster are installed
    P.P.S Points of the instruction are carried out to k).
    Alex

    Hi,
    I'm afraid that you have used Windows Server 2008 R2 which is yet to be supported by SAP ([Reference|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1383873]).
    Check whether you have the cluster configured at the OS level and also check whether you are able to resolve the IP address of the cluster nodes from your virtual host.
    If needed get help from your network admin and carry out the necessary checks for a clustered environment at the OS/network level.
    Regards,
    Varadharajan M

  • Is SSO possible for SAP ERP and xMII

    Hi,
    Is it possible to have Single Sign-On between SAP ERP and xMII.
    The requirement is that the user wants to login to the SAP ERP and using the same credentials he/she should be able to use xMII (without prompting for login credentials again.)
    If it is not possible why is it so, and if it is then how?
    Thanks in advance.
    - Ankit

    Hi,
      UME is User Management Engine. The UME provides the centralized user management for all Java applications and can be configured to work with user management data from multiple data sources. It is seamlessly integrated in the J2EE engine of the SAP NetWeaver Application Server for Java as its default user store and can be administered using the administration tools of the AS java.
       You can configure multiple data source (DB, LDAP or ABAP) to UME for managing user data.
    For more information on UME please, refer the below link as well.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/62/cc1940d4558f5ce10000000a155106/frameset.htm
    Thanks
    R.Murali

  • PI Configuration and connection settings between SAP ERP and peoplesoft

    Can someone please share some docs or the link  for the PI Configuration and connection settings for the connection between SAP ERP and people soft system. Thanks in advnce
    Regards
    krish

    Hello,
    The following links will be helpful in this regard:
    http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nwpi711/helpdata/en/d9/f3d22f01c741bdb0e62a2f4205411c/content.htm

  • Best Practise on SAP ERP 6.0 EHP4

    Hi Tech gurus!
    I'm Luckshmanan from Bangalore,India.
    We installed SAP ERP 6.0 EHP4. Now, we need to install the Best practice in the same system.
    How to do  that?
    With regards,
    Luckshmanan.

    Hi Luckshmanan,
    You can install Best Practise addon BP-ERP 604V2 on your SAP ERP 6.0 EHP4 system as per note 1425037.
    BTW, the latest version BP-ERP 604V3 is to be released in June 2010. Maybe you can wait until BP-ERP 604V3 is released.
    With Best Regards
    Julia Song

  • Procedure for Standby Database for SAP ERP 6.0

    Hello All,
    We are using SAP ERP 6.0 with Oracle 10g with AIX 5.3.
    We are planning to setup a standby database for our SAP ERP 6.0 production system as part of remote DR site using Oracle Data Guard.
    I was under the assumption that i can first install an erp 6.0 (ABAP) system using homogeneous system copy from my erp 6.0 (ABAP) production system and then start configuring oracle dataguard.
    But the System Copy Guide "System Copy for SAP Systems Based on SAP NetWeaver 7.0 SR3 ABAP" has mentioned that "You cannot create standby systems with a system copy".
    Please suggest the best practise or the procedure for creating standby database for SAP ERP 6.0 system. Iam not looking at the steps for creating a pure oracle 10g standby database, but with SAP instances as well.
    Thanks in advance.
    CVS

    Hi,
    Please refer the below mentioned link for configuring data guard.
    http://www.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10823/create_ps.htm
    Below mentioned are the sequence of stpes, which needs to be followed for setting up data guard.
    3.1 Configuring the Primary Database
    3.1.1 Enable archiving and define a local archiving destination
    3.1.2 Create a password file
    3.1.3 Configuring the Oracle networking files
    3.1.4 Set initialization parameters on the primary database
    3.1.5 Take Offline/Online backup of the primary database
    3.1.6 Create a control file for the standby database
    3.1.7 Prepare initialization parameter file for the standby database and start the primary database with the changed pfile.
    3.1.8 Copy all files from the primary host to the standby host
    3.2 Configuring the Standby Database
    3.2.1 Configuring the Oracle networking files
    3.2.2 Create a INIT parameter file for the standby database
    3.2.3 Copy the standby controlfile to the appropriate location
    3.2.4 Create Oracle Password File
    3.2.5 Start the physical standby database
    3.2.6 Initiate log apply services
    Regards,
    Ranjith

  • SAP ERP 6.0 EHP7 upgrade optimal resources

    Hi,
            I am performing EHP7 up gradation on SAP ERP 6.0.
    SYSTEM H/W: 8 CPU's   50 GB RAM
    OS : windows server 2008 R2
    DB: oracle 11.2.0.5.0
    SAP source release : ERP 6.0
    SAP target release : ERP 6.0 including EHP 7
         I have performed above said activity on test system / development system / quality system /production system. The time to complete different systems varied beyond my expected/planned values.
         I understood that there are users logged into production system till pre processing stage of SUM tool.So the long running phases (ACT_UPG , SHADOW_IMPORT , etc ) took approximately double the time than other systems.
         May i know various other other reasons ,for productions system , which reduces performance (in terms of run time).Is there any ways to improve performance (in terms of run time) .
         I have increased R3trans processes,Batch process to higher values during configuration phase of SUM tool.What are the optimal values which can be given in for fast upgrade.
    thanks & regards
    uday reddy

    First read the SAP note 1616401 - Understanding parallelism during the Upgrades, EhPs and Support Packages implementations to understand how you can make use of parallelism when you are doing an upgrade. There is no point in having more R3trans processes assigned when there is no sufficient resources available on the server. In order to make effective use of this you should make sure there is enough CPU and memory available on the system.
    The activation phase is expected to run for a long time but there are possibilities to improve the performance by adapting the memory parameters of the shadow system. You may refer to these SAP notes 1674812 - Performance improvement for ACT_UPG
    1223360 - Composite SAP Note: Performance optimization during import
    1897538 - Long runtimes when accessing DD27S in ACT_UPG phase
    Regards
    RB

  • Higher Studies in SAP/ERP

    I am currently working in IBM India as an SAP Consultant. I am planning to do higher studies and it would be really great if I could find a course for doing MS in SAP or ERP area. Can you please suggest me good universities and the courses they provide in this area on which I can do an MS ( preferably in USA ).
    Would really appreciate your help on this.

    Hi Archana,
    No unfortunately I did not have any luck finding universities with this course except for the one mentioned by Vimal. Although I found out that most universities provide a course MIS ( Management Information System ) where ERP is a part of it.
    Please do let me know if you all find out any other information regarding this course.
    Thank you so much !

  • Legal Issues for SAP ERP o ERP in general

    Hi experts,
    Can someone please help me finding some documentation about legal issues tha any enterprise that wants to work in the SAP ERP world must put an eye on? I have bees searching in several webs and I find no response about this. Any article or blog would be welcome too.
    Thank you very much.
    Artur.

    No Reply, so I close.

  • Guidelines to Installation on SAP ERP 2004 SR1

    Hi Friends!
    This is Anand Here
    I am totally new to SAP
    I was trying to install SAP on 2003Server
    while installing the ABAP System-Central Instance
    I Got this error message
    An error occurred during the installation of component SAP ERP 2004 SR1>ABAP System>Oracle> Non-Unicode>Central Instance Installation. Press the log View Button to get extended error information or press OK to terminate the installation. Log Files are written to SAP ERP 2004 SR1>ABAP System>Oracle> Non-Unicode>Central Instance Installation
    The following error occured and the installation could not proceed
    ERROR 2007-12-27 20:33:33
    FSL-00001 System Call Failed. Error 5 (Access is denied.) in execution of system call 'FindFirstVolumeMountPoint' with parameter (
    ?\Volume{c682cb5b-b31d-11dc-be09-806e6f6e6963}\), line (77) in file (synxcfsmit.cpp).
    ERROR 2007-12-27 20:33:33
    MOS-01235 Module function getInfo of module CIa0sMount Failed,
    Can Somebody help me with this

    Hi Anand,
    Seems like you failed to complete the pre-installation steps...
    As far as i can see there a Mount access failure, meaning the shares or mounts necesary for the installation are either unavailable or the user <sap>sid don't have enough rights to use it.
    Check all your pre-intallation steps (included on the installation guide available at SAP Marketplace) and try it agian.
    regards
    Juan

  • Information systems

    Hi,
    The client Director was mention in a meeting that we will be having Customer Information Systems or Information systems for Reporting in SAP. This helps in generating reports of customers based on different criteria like open item display, aging, by credit representative. A litlte configuration is required to set up which will use the customer information and creates Logistics Infromation tables.
    Any idea what this is and what are all the reports we can use with this.
    Could someone throw some light on this.
    Regards,
    Satya

    Interesting, I usd the same txt and I got 1 link which is of not much use. I tried the search in this link
    http://www.sap.com/industries/automotive/index.epx
    I dont know why I am not abl to get it.
    I have a question, in standard SAP, in the spro, we have, Financial Accounting-Ar and AP-Information system. In the Information system, there are 2 components AR and AP in which we have drilldown reports and other options. Is this the same as "Customer Information Systems". What kind of reports are generated using this?
    I hope you understand my question. Please help me with this.
    Regards,
    Satya

Maybe you are looking for

  • RSD...just stops on its own?

    So about a month ago the dreaded RSD started happening to my macbook. I tried several times to make appointments to see a "Genius" at my apple store, however unless I wanted 11am or 1130am on any day I tried...I couldnt get in, and forget any times o

  • Enhancement Miro list of delivery notes

    Hi, I searched on forums i didn't find. Does there an Enhancement with values list of Delivery Notes in MIRO? Thank you

  • Watermark disappears in Lightroom 5.2

    I use Lightroom 5.2 to edit photos and store them in my Flickr gallery. In LR5 I use a Watermark for copyright purposes. However, the photo in Flickr shows the photo without the watermark. Flickr has a standard "Copyright" and "All Rights Reserved" p

  • ORA when using DB LINK declared as variable

    Hello all, I am working on oracle 10g: and I have the below set serveroutput on; declare db_link varchar2(30):='ARCH_LINK'; begin dbms_output.put_line (''||db_link||''); -- statement 1 procedure@''||DB_LINK||''('param1','param2'); -- statement 2 end;

  • Can I run a set up without a cd for a WRT54g V5

    can I run a set up without a cd for a WRT54g V5 ?