Want to Dsiable the Existing Records

hi All,
i am Using Database 9i and Oracle Forms 6i
i have a tabular bock of 10 records to Display and it has 4 four Records in the table
i want to do is when i fetch my Records , the Existing Records(4 Records) will Disable and the Record where my Cursor is (5th Record) will Enable , if 1 Column of the Existing Records will Disable it will be Enough for me
plzz can any tell me how can i Do this !!
thnks

hello,
this is a commoon request please try to search the forum.

Similar Messages

  • Only query on existing form without any changes on the existing records?

    Dear all,
    I am working a brand new form. The form is able to query all the records from the table. However, when I leave the form, it will ask me "Do you want to save the changes you have made?" everytime. I didn't make any changes on the existing records.
    My form only has 2 fields (one with LOV and one without).
    Does anyone know what went wrong?
    Thanks.

    How do you populate your datablock? Do you query one of your values in a Post-Query trigger?
    However you are populating your datablock, Forms is detecting that the status of the Form, Block or Record is changing.
    Also, please let us know your Forms version.
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • JDBC Scenario: Delete all the existing records and Insert

    Dear All,
    Scenario: IDoc to JDBC
    PI need to delete all the existing records in the SQL table then need to insert the records.I have created a two statements in the target structure.
    Statement1
       -> TableName
           -> action : DELETE
           -> Table : TableName
    Statement2
       -> TableName
           -> action : INSERT
           -> Table : TableName
           ->Access
               -> Elements
    I am getting below error while try to delete the records in the table.
    JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for  table/stored proc. 'Tablename' (structure 'Statement1'): java.sql.SQLException: FATAL ERROR document format: structure 'Statement1', no key element found
    Note: we use above structure in the another interface without specifying any Key for Delete operation(Server is same but different database for this two interface) and it works fine. Although the Primary keys has been set in the SQL table i am getting the above error.
    let me know what are the setting need to make in PI and SQL DB to achieve this.
    Regards,
    Manikandan Shanmugam
    Edited by: Manikandan Shanmugam on Nov 8, 2011 6:19 AM

    The straucture what you have deined for Delete is not correct, you should have key field in statement structure then only you can perform Delete operation.
    refer below link
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/7b6e85fde93673e10000000a114a6b/content.htm
    Regards,
    Raj

  • Dev-client not letting change the existing record in PA30

    Hello Experts!!
           I don’t know I have to ask this question here . I have created ALE link between our DEV system and QA system for our dry run .Two days before Basis team copy the data from PRD to Dev and also in Qa6 to make them in sink. When user is changing data in DEv6. They are getting an error message ,the is maintained in Dev_100. its not changing the existing record .Can some body explain me what’s happening here .
    Cheers
    Usman

    Hi Usman .
              you’ll say " here he comes again " . Any way you need to run <u><b>tr.BDLS</b></u> , It basically change the system name in SCC4 and also update the tables which kept the system name and after that you’ll be able to change the existing record in the system .
             hope this’ll give you the solution .Don’t forget to award points
    Thanks
    Saquib khan

  • I have an original iPhone running version 2.2.1.  I wish to get rid of the phone, but before discarding it I want to remove the email records, phone book information, and photos.  I would like to leave the other apps in place.  Any suggestions?

    I have an original iPhone running version 2.2.1.  I wish to get rid of the phone, but before discarding it I want to remove the email records, phone book information, and photos.  I would like to leave the other apps in place.  Any suggestions?

    Delete you mail account on the phone and disable to sync your mail account in the info pane in iTunes with your phone connected, same for contacts. Also deselect photo syncing in the photo pane. After the following sync, your mail, contact and photos should be gone.
    Photos inside the camera roll have to be deleted on the phone.
    Remember, that apps only can be used with the account they were bought with. If the phone will be set up with a different iTunes account, all of your apps will be removed.
    Message was edited by: Ingo2711

  • I have new music I am adding to my itunes.  My ipod has the existing music from my itunes.  I want to delete the existing music from the ipod and only select the new music just imported into itunes be sync'd on to my ipod?

    I have new music I am adding to my itunes.  My ipod has the existing music from my itunes.  I want to delete the existing music from the ipod and only select the new music just imported into itunes be sync'd on to my ipod?

    Open itunes, connect ipod, select what you want to sync ( in the music tab)  sync.

  • I have a window asking: do you want to replace the existing Normal.dotm? what should i do? I'm on OSX 10.7.5 with Office 365 14.3.2 for mac 2011.

    I have a window asking: do you want to replace the existing Normal.dotm? what should i do? I'm on OSX 10.7.5 with Office 365 14.3.2 for mac 2011.

    That is not what I said.
    Normal.dotm is a template, not a .doc file. It is the template that every new document is based upon, IF you changed any of the template settings (font size or other attributes) then you will be prompted to save the changes.
    Did you? (or is this an old Windows Template)

  • Want to change the Result Recording Result

    Hi All,
    I have a problem Please help me out or suggest me is it possible to do-
    Result Recording is done and saved for a particular lot and result is accepted and i did UD for that and accepted as well as i posted to un-restricted stock with Acceptance and saved.
    Now my client want to chance the result and reject it and post it to blocked stock again do UD.
    This is our normal requirement here.
    Regards,
    siddharth shanker

    Hi,
    You have to explain your  client the process and its pros and cons, once you give UD and post the stock then how will that be canceled. Keeping apart SAP, in actual domain practice also  when you accept the lot you can't reject it on same challan, you have to so separate process.
    Here best way is to assign 08 Insp type to that material and create the lot using 322 movement type (MB1B) and again reinspect and post it to block and send back to vendor. This is only if you need to record results again, otherwise you can directly post from unrestricted to Block stock using movement type 344 i.e. from unrestricted to block then purchase person will send it back to Vendor. You can raise notification to keep record of this movement.
    Best Regards,
    Shekhar

  • I want to delete the transactional record from database table

    Hai,
    I want to delete the transactional data from database table with out using the dialog programming is it there any trancation for this.
    for master data we have the transaction code for delete the records. The t.code is 'OBR2'.
    Plz help in that cse.
    Thanks and regards,
    P.Naganjana Reddy

    Hai,
    Plz help me urgent.
    I am asking i want to delete transactional data from database table without using the dialog programming.
    Thanks and Regards,
    P.Naganjana

  • Sub: Our Client wants to change the existing Release procedure.

    Dear Friends,
    Requirement:
    Our requirement is to remove one of the Release Code from the existing release sequences, with out affecting the old Purchase Orders.(including Released and Partially Released)
    Changes we done:
    Once we remove the specific release Code and found that it affects all the Purchase Orders (both Released and Partially Released) which are relevant to this removed code.
    Is there any other way to do this changes with out affecting the old Purchase orders (we don't have Work flow in the Release Strategy).
    Regards,
    Dhan

    Hi,
    If you want to change the release code, then what are the open order which or not released and in process make sure those PO's are released then you can change the release code.
    Else System wouldnt allow you to process further, then you need to create new PO's, So avoiding this first release all the open PO's and partial release PO's then you do change the release code.
    Thanks & Regards,
    Dhanush.

  • Problem in modifying the existing record in table control

    Hi Experts,
    I have one table control.I have entered one record and save it.When I am modifying the same record a duplicate record is created.I need if I modify the same record that record should only modify.How to delete the duplicate record.

    Hi,
    In Flow logic.
    LOOP .                        
      MODULE tbc_modify ON CHAIN-REQUEST.
      MODULE tbc_mark.     
    ENDLOOP.    
    In module.
    MODULE tbc_modify INPUT.
      MODIFY t_data
        FROM fs_data
       INDEX tbc-current_line.
      IF sy-subrc NE 0.
        APPEND fs_data TO t_data.
      ENDIF.                              
    ENDMODULE.                            
    MODULE tbc_mark INPUT.
      DATA: tbc_wa2 LIKE LINE OF t_data.
      IF tbc-line_sel_mode = 1
      AND fs_data-mark = 'X'.
        LOOP AT t_data  INTO tbc_wa2
         WHERE mark = 'X'.
          tbc_wa2-mark = ''.
          MODIFY t_data
            FROM tbc_wa2
            TRANSPORTING mark.
        ENDLOOP.                          .
      ENDIF.                             
      MODIFY t_data  FROM fs_data
        INDEX tbc-current_line
        TRANSPORTING mark.      
    ENDMODULE.
    Edited by: sapabap403 on Aug 31, 2011 9:29 AM

  • Software migration to SAP but want to keep the existing database

    Dear experts,
    My company is planning to replace existing business applications (ASP or ASP .NET applications & Oracle database) with SAP software. Some applications are even still under development. To avoid complete code rewriting, is it possible to keep the existing database & only use ABAP for application logic & user interface instead?
    Thanks in advance.
    Regards,
    Haris

    Hi,
    SAP database table structure and ASP .NET database table structure are totally different. Hence simply keeping the base oracle database same and changing the covering programming layer from ASP to ABAP won;t help.
    You will need to redevelop everything in ABAP from scratch.
    Hope this answers your query.
    Regards,
    Deepak Kori

  • While i am trying to save the existing record with same fields in cloud DTO using flex4 mxml app

    hi,
    i am doing flex4 web application with mxml tags,
    i  am having one text box and one datagrid and one save button. text box  having one company name, data grid having employee names.
    when i click save button which is placed in outside the datagrid it will save all the details in cloud DTO.
    Now  my requirement is text box having the same company name and when i  enter same employee name in datagrid and click save button means it wont
    allow to save that record, and through msg box with some alerts.
    this is my code:
    private function saveRecord():void
                 refreshRecords();
                 model.employeeDetailsReq=new EMPLOYEEDETAILS_DTO();
                     var lengthindex:uint=model.employeeDetailsReqRecordsList.length;
                     var i:int;
                     for (i = 0; i < lengthindex; i++)
                     if((model.employeeDetailsReqRecordsList.getItemAt(lengthindex).employee name==customerdet.selectedItem.employeename)&&
                          (model.employeeDetailsReqRecordsList.getItemAt(lengthindex).employeeNumber==customerdet.s electedItem.employeeID)){
                         Alert.show("you cannot Add Same CustomerName and Invoiceno again");
    (when this line come the error through like this: Index '8' specified is out of bounds.
    else
    var dp:Object=employeedet.dataProvider;             
    var cursor:IViewCursor=dp.createCursor();
    var employeename:String = employeename.text;
             model.employeeDetailsReq.employename = employeename;
    model.employeeDetailsReq.employeeNumber=cursor.current.employeeID;
    var sendRecordToLocID:QuickBaseEventStoreRecord = new
                         QuickBaseEventStoreRecord(model.employeeDetailsReq, new
                             KingussieEventCallBack(refreshList))
                     sendRecordToLocID.dispatch();
    <mx:Button  id="btnAdd" x="33" y="419" enabled="false" label="Add" width="65"  fontFamily="Georgia" fontSize="12" click="saveRecord()"/>
    employeename and employeeID are datafields of datagrid. datagrid id=customerdet
    employeeDetailsReqRecordsList---recordlist of save records
    please help .
    any suggession or snippet code welcome
    B.venkatesan

    sorry but you question  is not very  clear...are you trying to show the item clicked on the datagrid on the input box? with an alert? you should look at "listevent" if thats the case?... sorry i just dont follow.
    Miguel

  • TS1702 When I tried to update existing Pages app it did not complete loading update and has 'locked' into loading mode. I do not want to trash the existing Pages because it contains documents I need. Any advice?

    My problem is that when attempting to load updateed Pages the app has frozen in 'loading' mode and will not complete the loading. It is now unusable and does not respond to turning off the iPad and restarting. The Pages icon is in 'shadow' and will not respond . Cannot get the red minus symbol. Can get X symbol but do not want to trash it because it contains many documents I do not want to lose.  Suggestions welcome!

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

  • I want to import bookmarks (.json) from my old computer BUT i do NOT want to overwrite the existing bookmarks on my new computer. How can I do this? Other solutions simply restore (i.e., overwrite)...

    Windows 7, FF 10.0.2. (The old computer was probably like XP and a very old version of FF...)

    All good ideas!! However, here's another twist. There are actually TWO old computers--my old personal laptop and my old work computer--different sets of bookmarks. And no, I don't have access to either computer anymore.
    However, it sounds like I can do two iterations of AliceW's suggestion--i.e., Export my current bookmarks, restore first old computer bookmarks, export restored bookmarks, restore second old computer bookmarks, then reimport both created sets to merge into a new super bookmarks. Is that correct?
    I think I'll go take a walk in the park first to clear my head... then I'll come back and try it. It sounds quite easy in principle.
    Thanks to all!!! I'll let you know how it goes! :)

Maybe you are looking for

  • How do you separate 3 devices that are using one account on itunes?

    I do not wish to have my families downloads on my device or vice versa!

  • TV Out (HDMI or composite) iOS 4.3.3 iPhone 4 problems

    Hello, thanks for helping me out. I have an iPhone 4 (GSM) on iOS 4.3.3, and I read that during the 4.3.X updates that they "fixed" the TV out. I don't know if there really was a problem... So I tried playing Rage HD on it with the TV Out Composite c

  • Reg : Getting trigger name

    Hi all, Is there any way to get all the TRIGGERS defined for an specific field item. For eg: If an Text Item has 3 triggers namely (When-Validate-Item, Key-Next-Item & Post-Text-Item). Programatically can we get those names ? Thanks & Regards,

  • How osb handle end point offline for long time

    Hi all, In my project, the messages will be sent real time to distributed client, each client is only have one end point, so there is no load balancing could be applied. I already set the retry count, iteration interval and also offline endpoint URIs

  • Update Date types based on actions

    Hi Gurus, I have a requirement to update date types within a date profile based on a certain action condition. I have 3 date types: Downtime Start Downtime End Total Downtime Duration The priorities in my transaction have, x, y, z for example and x i