Want to erase hard drive and reinstall Tiger- quick questions

I am giving my G4 to my son in a couple of days and it now has Classic on it. My plan is to erase the whole hard drive and install just Tiger. So my thoughts are:
1.) There are no settings I want/need to preserve. I have 4 Tiger CD's- is that the right number? I think I have them all but just want to make sure.
2.) Do I insert CD holding down the C key and from some point when the CD loads, I chose Disk Utility and wipe the hard drive then? Are there different choices for wiping the hard drive? Like the number of passes?
3.) And then is it just a simple matter of installing all 4 Tiger disks?
Any other tips, tricks, advice you can give me? Tomorrow's the big day (2/1)! Thanks so much, I am a bit nervous about this......... Judy

mrstee:
Here are some directions you may find helpful:
Formatting, Partitioning Erasing a Hard Disk Drive
Boot from the install CD holding down the "C" key.
Select language
Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select Partition tab in main panel. (You are about to create a single partition volume.)
Select number of partition in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
Type in name in Name field (usually Macintosh HD)
Select Volume Format as Mac OS Extended (Journaled)
Click Partition button at bottom of panel.
Select Erase tab
Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
Check to be sure your Volume Name and Volume Format are correct.
Click Erase button
Quit Disk Utility.
Installation Process
Open Installer and begin installation.
Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
Optional: Check box to install X11 (Tiger) BSD Subsystems (Panther & earlier).
Proceed with installation.
After installation computer will restart for setup.
After setup, reboot computer.
Go to Applications > Utilities > Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select First Aid in main panel.
Click Repair Disk Permissions.
Connect to Internet.
Download and install Mac OS X 10.4.11 Combo update (PPC)
Computer will restart after installing update.
Repair Disk Permissions as previously.
Go to Apple Menu > Software Update.
Install all updates.
Computer may restart after updates.
Repair Disk Permissions, again, as previously.
Please do post back with further questions, comments or an update.
Cheers
cornelius

Similar Messages

  • Saving Mail before erasing hard drive and reinstalling tiger

    I might need to erase my hard disk and reinstall Tiger. I would like to keep my mail app how it is. Last time I tried syncing my Mail App to my online mail accounts not all the mail was downloaded to MAIL. Anyone know some ways to go about this.

    First reinstalling Tiger is rarely necessary.
    Second .Mac sync only syncs the rules and preferences for Mail. It does not sync messages.
    See KB 301239, How to back up and restore your important Mac OS X 10.4 files.

  • Need to erase hard drive and reinstall system on iMac but have misplaced original install disks. Tried to use a my copy of Snow lepord 10.6 from my Mac pro but will not boot. Can original install disks be replaced. Thanks

    Need to erase hard drive and reinstall system on iMac but have misplaced original install disks. Tried to use a my copy of Snow lepord 10.6 from my Mac Pro but will not boot. Can original install disks be replaced. Thanks

    Yes the original Install Discs can be replaced for a nominal fee. Call AppleCare, you will need a credit card and the serial number of the machine. You can use the AppleCare Contact Info for the phone number on your part of the planet.

  • Erasing hard drive and reinstalling

    Hi folks! Can anybody tell me how to erase the hard drive and reinstall OSX?

    If you are selling it, then you will want to ensure
    that all of your personal information is removed.
    So... boot from the OS X disc and select Disk Utility
    from the Apple menu. Select to reformat the drive and
    under the options select to write zeroes. This will
    overwrite all the data on your drive.
    The usual erase does not overwrite your files.
    Don't forget, if you have purchased any tunes from iTMS, deauthorise your computer, or you will lose one of you'r 5

  • Erasing hard drive and reinstalling OS

    My mid 2011 iMac (OSX Yosemite 10.10.2) has been getting very sluggish despite ensuring sufficient spare space (currently 200Gb) and running the basic Disk Utility verify/repair routines. So having done a full data back-up I am now trying to erase the hard drive and reinstall the OS. Following the recommended steps in the Disk Utility I get as far as the erase disk stage but then an error message pops up saying "couldn't unmount disk". Has anyone encountered this before or have any suggestions please?

    Hello kayjayaitch,
    I'm sorry to hear you are having these issues with your iMac. If you continue to get this unmount notification, you may find the information regarding related unmount issues in the following article helpful:
    Using Disk Utility to verify or repair disks - Apple Support
    Also, if your iMac originally shipped with an Install disk, you may want to try using the Disk Utility on that Install disk, erase the hard drive from there, then try restoring from Internet Recovery as detailed here:
    OS X: About OS X Recovery - Apple Support
    Sincerely,
    - Brenden

  • Erase hard drive and reinstall Lion

    Hello Everybody,
    Is there a straightforward way to erase the hard drive of my imac and reinstall Lion. I have purchased the mac from my friend but I believe the HD hasn't been completely wiped as I can still see some of his files.
    OSX Lion was purchased and installed but is there a way to completely delete the HD, reinstall Lion and start with fresh computer?
    Thanks!

    I'm in the same boat but a slightly different twist. It appears, from talking to Apple support, that MobileMe corrupted some of my data on my iMac. Everything is backed up. It appears that some of the preferences have been corrupted because my scrolling doesn't work the way I set it. MobileMe propagated this corruption over to my Macbook Pro but I'm living with it right now. I turned MobileMe off on my iPad2 and my iPhone. I'll go and correct the issue but then the incorrect will turn itself back on. Even repairing permissions fixed stuff and they came back later. I chose to reinstall Lion. I booted CTRL+R, chose ERASE with the correct Mac format then double checked everything before reinstalling Lion. NO LUCK. Lion comes back but like the person above said, there are files still there so ERASE doesn't ERASE EVERYTHING. I still have issues with my preferences. I've installed the Lion Recovery Disk Assistant and have it loaded on a 4gb thumb drive. Now what I want to do is erase...blotto...flatline...zap... you name it, I want it GONE. Then I want to format and reinstall Lion from a totally naked disk drive. Anyone have any ideas?  Thanks very much. It was right here that I found out about the Recovery Assistant!

  • Can't erase hard drive and reinstall Snow Leopard (SuperDrive)..

    Running OS X 10.6.8
    2.13 GHz Intel 2
    2 GB 1067 MHz DDR3
    I have the original "gray discs" with Snow Leopard on them, and a SuperDrive. I would like to completely wipe the computer, and start over with just Snow Leopard. When I tried to do this yesterday following this tutorial, the whole process sort of froze at Part One, Step Three.
    For the lazy non-link-clickers, here's the instructions I followed:
    1. Turn on the computer.
    2. Insert the Mac OS X Install DVD into the optical drive.
    3. Press and hold the "C" key while the computer starts up. The computer will start up using the Install media.
    ....And that's as far as I got. The machine turned on, the DVD whirled and clicked, and the screen glowed gray for about 10 seconds. Then, it went black, and the DVD stopped whirring. Then that cycle repeated. Over and over and over and over. For over 24 hours.
    So, what is going on, here?

    Well, Kappy, you were right: my 2009 MBA came with Leopard, so those Snow Leopard gray discs I was using did not come with my machine.
    Unfortunately, I was unable to find the Leopard gray discs that must have come with the computer.
    So, I found a retail copy. And then I:
    1) Inserted the retail OS X 10.5 disc into the SuperDrive.
    2) Double-clicked "Install Mac OS X.app" in the DVD contents pop-up
    3) Clicked "Restart" when prompted by the installer.
    ....And that's as far as I got. Again, the machine turned off and then back on, the DVD whirled and clicked, and the screen glowed gray for about 10 seconds. Then, it went black again, and the DVD stopped whirring. Then that cycle repeated. Over and over and over and over... Again.
    Sigh. What is the deal.

  • With Lion, How Can I Erase the Hard Drive and Reinstall The System Software?

    I plan on buying a used iMac with a Core 2 Duo so that I can run Lion.  Since Lion can only be purchased at the Mac App store what if I needed to erase my hard drive and re-install the system software.  How can I do this without a DVD with the OS on it like I have for Snow Leapard.  I suppose that I could boot from my Snow Leapard DVD and do the erase.  Then, I supposed I would be able to download Lion again from the Mac App Store without paying for it again.  But, how would you erase a hard drive and reinstall the system software when purchasing a new Mac with Lion already installed and no DVD at all with the OS on it?
    -- Kaydell

    When someone purchases any Apple computer with a DVD Drive, they should have recieved two DVDs... One contains the Operating System (up to Snow Leopard, Lion no longer ships on DVD) and the other contains the SYSTEM SOFTWARE (i.e. iLife and iWork). To install the software, they just insert the DVD with the SYSTEM SOFTWARE into any compatible Mac and run the installer. There is no need to erase the hard drive to install SYSTEM SOFTWARE. Maybe a friend can let you borrow the SYSTEM SOFTWARE DVD. The other option is to purchase the software via the App Store.
    FYI... App Store purchases are linked to the PURCHASER'S APPLE ID. So if you buy a used Mac from a friend and that Mac already has Lion installed on it,that Lion purchase is linked to YOUR FRIEND'S APPLE ID, not yours. So if you want to download Lion again, you will have to enter your FRIEND'S APPLE ID AND PASSWORD. You can always have your friend re-download Lion and make you a DVD copy.

  • I believe my macbook pro hard drive is bad.  I erased the drive and reinstalled the OS and the macbook still runs really slow.  I dont know if the hard drive is the issue.

    I believe my macbook pro hard drive is bad.  I erased the drive and reinstalled the OS and the macbook still runs really slow.  I dont know if the hard drive is the issue.

    Did you try an SMC reset too? It's easily done and none of those resets to the best of my knowledge hurt anything. When I was fooling with my system, which at one point was a home made Fusion setup, I needed to reset the SMC sometimes to get the drives recognized. Reading the documentation the sudden motion sensor is drive related but that seems to be about it.
    Some more specifics may be needed about the drive itself, the model number of your unit, and the OS version you're running.
    At present, the problem seems sort of odd to me. FWIW cable problems can be quite intermittent. I used Scannerz to find some of the problems on my original system that I later converted to a new HD and SSD combo. It can find lots of problems if you learn how to use it right (HD problems, logic board system faults, and cable problems) but you need to get a system at least partially up and running to use it, and it doesn't sound to me like your there right now (in other words, don't go out and buy it because at this point I don't know how it could help you)
    Another word of advice would be to not go out and start throwing parts at a problem unless you have a good idea what the source of the problem is. If you have a logic board problem, new drives and new cables won't make it go away, you'll just be wasting your money. Logic board problems, cable problems, and drive problems can all have very similar end user symptoms. The article that I linked above named "Hard Drive Problems" has a section on general symptoms of problems and if you read the article it becomes clear there's a lot of overlap associated with different types of problems.
    I assume that your unit isn't under warranty. If, by chance it is I wouldn't even fool with it and I'd take it to Apple and let them deal with the problem. You also might want to check with whatever Apple sources you have available to test your system, like an Apple store, and see how much they'll charge (if anything) to evaluate the system.
    I certainly hope this helps.

  • Hi, I want to format my hard drive and reinstall my PC. How can I transfer my Acrobat Standard licence ? Regards.

    Hi,
    I want to format my hard drive and reinstall my PC. How can I transfer my Acrobat Standard licence ?
    Regards.

    First you should deactivate any Adobe programs you have installed so that you free up the activation for when you want to reinstall.  When you are ready to reinstall, do so using the installation files - transferring generally does not work.
    Before you do anything you might want to check to make sure you have access to installation files for reinstalling the program(s).

  • How do i erase the hard drive and reinstall?

    How do i erase the hard drive and reinstall everything? My computer is running slow and i thought with having a 2.4ghz processor and 4gb of ram would make speed not a factor but obviously i was wrong in that my comp is running slow. Not as slow as my pentium processor desktop but its too slow for my tastes. Im waiting to get an external hd so i can save my songs and pictures to before i do erase everything.

    Go to finder and in Spotlight, type in erase and install. The second choice is "Reinstall OS X. Print that out and follow the directions.
    Good Luck.
    Adam

  • I have a iMac 6,1 that I want to reformat the hard drive and reinstall Snow Leopard version 10.6.3 . I don't know how to reformat

    I have a iMac 6,1 that I need to reformat the hard drive and reinstall Snow Leopard version 10.6.3 . How do I reformat ?

    Boot the ssystem from the OS DVD. Once it is booted run Disk Utiltiy. Select OS Extrended (Journled)
    See http://support.apple.com/kb/HT3910?viewlocale=en_US&locale=en_US

  • My 2009 MacBook Pro keeps restarting even after I wiped the hard drive and reinstalled OSX.

    About a month ago, my laptop started to randomly turn off: I would be using either Chrome, Photoshop (the free CS2 version available from Adobe's website) or Powerpoint, and the screen would go blank. I would then have to hold the power button for a while until the little light at the front of the computer would flicker and it would restart. I brought it to the Mac Store where they tested it and said it looked fine. They suggested I erase my hard drive and reinstall OSX as a precaution.
    Fast forward a month, I have been very busy with work and hadn't been able to fix this problem. It wasn't that bad, only once every couple of days, sometimes more, sometimes less, I could work despite this problem.
    Then, I installed OSX Mavericks. The installation started in the morning, but, like an idiot, I paused it to go to work. Later on, I completed the installation, it looked fine, but then all day long my laptop would suddenly restart and go to a grey screen that said in multiple languages "Your laptop restarted because of a problem, press any button to continue the restart." A computer technician friend of mine checked it out and said it was probably due to the badly installed OSX and suggested that I erase my hard drive and reinstall OSX.
    I backed up all my files, erased the hard drive and reinstalled OSX. Everything looked fine.
    Then it happened again.
    Any ideas of why this is happening?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Can i recover photo files lost when i wiped out my hard-drive and  reinstalled mac os x?

    Can i recover photo files lost when i wiped out my hard-drive and  reinstalled mac os x?  I know that when a computer is wiped cleaned that the info is still on the hard drive, how do I access it?  Can I pay someone to access it?  Long story short, everything was saved to my external hard drive except my photos, by mistake of course.

    You have to stop using the drive immediately.  Completely stop.  Do not boot the computer from the drive.
    File recovery software: Try using an application such as Data Rescue 3 - http://www.prosofteng.com/products/data_rescue.php or FileSalvage - http://subrosasoft.com, or one of the ones listed in the (old) link below. Some have free trial versions that let you see if the software will help before you decide to buy. You will also need a second hard drive equal to or larger in size than your first drive as a destination drive for recovered files.
    http://data-recovery-software-review.toptenreviews.com/mac-recovery-software
    It is critical that you do not use the computer or even turn it on until you have rescued your files. Files only have the directory reference to them removed when you empty the trash or otherwise delete them from a computer (unless you use secure erase, in which case they are gone forever or can only be potentially be recovered by very expensive means) and are still present on the computer. However, their space is marked as available to any other file creation done on the computer (even done by you booting the computer) and there is risk that your files will be overwritten by the computer.
    Even if the above works, do not expect the results to be pretty or even 100% successful.  Files will often lose their names and you will have to re-name them one by one.

  • Formated hard drive and reinstalled operating system

    I recently formated my hard drive and reinstalled my operating system. There was some application and music that I purchased on my ipod touch that I forgot to backup. They are still on my IPOD but not on Itunes on my computer. Is there any way of getting these back?
    Thanks,
    Marckc

    If you only want to copy your purchases to the computer that can be done using iTunes, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
    For everything else (including purchases) there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod Touch or iPhone. You'll find that they have varying degrees of functionality and some will transfer data (such as playcounts and ratings), movies, videos, photos, podcasts and games as well.
    A selection of iPod/iPhone to iTunes utilities:
    Senuti Mac Only (iPod Touch & iPhone compatible)
    SharePod Windows Only (iPhone and iPod Touch compatible)
    TuneJack Windows Only (iPhone and iPod Touch compatible)
    iPodRip Mac & Windows (iPhone and iPod Touch compatible)
    Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
    iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
    iGadget Mac & Windows (iPhone and iPod Touch compatible)
    iRepo Mac & Windows (iPhone and iPod Touch compatible)
    iPod Access Mac & Windows (iPhone and iPod Touch compatible)
    TouchCopy Mac & Windows (iPhone and iPod Touch compatible)

Maybe you are looking for