Want to export only short part of a longer project

I have a 27 min project already edited on the timeline, but I want to export to a MOV in H264 only a portion (Approx 6 min) of it
so that someone can review it. I don't want to use Compressor
Can this be done? How???
Any help appreciated
Thanks
AppleLou.

I've amended that thread because it no longer works in 10.0.1. You can either copy and paste clips into a new project or copy and paste the compound clip into a new project to export. If you try to export the compound clip it will still export the project, unless the compound clip was made in the browser.

Similar Messages

I want to export only MP3 formatted songs to my SD card.

I bought a new power pod 360 speaker that will play music on a SD card. It only supports MP3 format, and I changed the format on all of my iTunes music library today. It actually left the original and added the new version underneath. However, I am unable to export only the MP3 songs to the SD card. Can anyone help?

mimizuff wrote:
I bought a new power pod 360 speaker that will play music on a SD card. It only supports MP3 format, and I changed the format on all of my iTunes music library today.
Good, you have rectified your past mistakes. In the future, please make sure that all music that you purchase, rip, or otherwise acquire is in MP3 format, and you will avoid this problem.
I am unable to export only the MP3 songs to the SD card. Can anyone help?
Put your Music library in Songs View, and look at the Kind column. (If you don't have a Kind column, enable it via View > Show View Options.) Any song with a Kind of MPEG audio file is an MP3.

How do I export only a part of the sequence? (storyline)

In FCP 7 it was simple to export only a portion of the sequence. How in the world do I do that in X?
Later.
Tom

If you have Compressor 4 then I think you can still export just a selected range of your timeline ... if not, or if you don't have Compresor 4 then you should be able to quickly convert a selected range to a Compound Clip, then right click that and Open in Timeline, then export that timeline (ie the original selection) ... then just step back into the main timline and Undo to get back to the pre-Compound Clip state if necessary.

Export Only Small Part Of Timeline

I want to only export the first 30 seconds of my movie, how can I do that?

Mark > Set Play Range In and Mark > Set Play Range Out.
Basic stuff - check the built-in help for this kind of thing.

IPhoto suddenly wants to export only unedited photos now. Why do no crops or light/colour adjustments get saved?

INTRO: I have used iPhoto for many years (since iPhoto 5 I believe). As a non-professional photographer, I have been very happy with the application, as it has let me do most operations I need: Photo organising, adjustments of light, levels, contrast, colour balance, straightening and crop. (I haven't even had the need for Photoshop Elements for several years.)
I usually make some adjustments to each and every shot – some big and some small – before exporting as a high quality JPEG for uploading to Flickr or other places I use them.
PROBLEM: I have recently upgraded to a new Mac and iPhoto '11, and have been using this version happily for about a month now. Earlier this week, straight out of the blue, iPhoto has decided "all by itself" to stop saving edited/adjusted/cropped JPEG exports of my Nikon RAW photos, and instead only saves the unedited version as a JPEG. None of my crops or light/colour adjustments get saved anymore! (I first noticed when a closely cropped shot came out uncropped, and a shot I'd converted to black/white came out in full colour.)
(Strangely enough, it seems iPhoto treats "original JPEGs" differently, as shots from my non-RAW cameras get exported with my edits preserved.)
Has anybody else experienced the above described problem with exporting photos? Is it a bug, or is it some setting somewhere that I am not aware of? If I can't resolve this issue, I will have to stop using iPhoto and find a new "photo lab" and establish a new workflow. I hope I don't have to.
Best regards,
Jørgen in Oslo, Norway

Hi again, Terence, and again thanks for your advice.
I tried the Rebuild Library operation during the weekend, but having some 160 GB (1400+ events and 20000+ photos from 2007–2011) in my main (corrupted) iPhoto library, the operation seemed like it would be taking the whole of Saturday and maybe Sunday as well. I started the rebuild in the morning, iPhoto Library Manager chewed its way slowly through my photos, but iPhoto kept crashing every once in a while (especially often if other applications were running at the same time). When it had been working for about six hours, the import part was finally finished, but the metadata rebuilding process looked like it would be taking hours still, and I really needed to get to work on some other things on the same machine. So unfortunately, I had to abort.
Thus, on Sunday morning, I changed strategies: I decided to use iPhoto Library Manager to break off a smaller subset of my gargantuan problem library to a new library. I had already made a full manual backup of the corrupted Library to a USB external hard drive beforehand (and I also have continuous Time Machine backups), so I am pretty lax with "destructive" stuff right now, as long as they can fix my problem. This is how I'm working now:
I created a completely fresh and empty iPhoto library, and used iPhoto Library Manager to move a handful of recent iPhoto events from the corrupted library. I have now tried some edits and exports, and the new library is behaving healthy at the moment. I'm keeping my fingers crossed – if things work as good as they seem in the days to come, I will split up my entire, corrupted 2007–2011 library into separate sets. (Maybe one or two for each year.)
And in the future, I have decided to make a new iPhoto library every 1st January and 1st July.

How export only a part of timeline montage ?

In -Out Range Selection not work...share always export entire timeline.
cheers
silvio bonomi

So if I want to go through a lot of large videofiles and just render here and there usefull clips (which are my base-videos for other software like Resolume and Max6), I have to create as many new projects? Oh no...
1. Is there a quick combination of keys to start a new project with one selected clip on the timeline?
2. Is it possible to make a render queue of several projects (like in After Effects)?

Export only of developped pictures

Hi, I am a beginner in Lightroom 4.3.
I loaded some folders with my pictures. In Lightroom I developed some of it, others I did not.
Now I want to export only those pictures which I developed. I know, I can manually select at the bottom line all pictures showing a +/- sign and the export them. This is quite a lot of work with my 800 pictures.
Is it possible to tell Lightroom that it just selects and exports the developed pictures?

Ahhhh, I was scratching my head over that one (trying to provide answer).
My thought was to simply filter on the appropriate attribute or metadata, but a criterion of "has adjustments" is not available for filtering (though it is for Smart Collections). I wonder why Lightroom's filter criteria aren't the same as for Smart Collections?   An oversight?
Phil

Export only selected objects of a drawing

Hello,
I want to export only some objects of a drawing to png. Therefore I select them via click + Shift. I used CorelDraw before and there i can select, in the export window, "Only marked objects" (don't know the exact English term). Is there a comparable option to Corel?
Thanks,
Slodomir

off the top of my head i don't know a way of doing this automatically...maybe i just don't know of it...
My work around would be:
unlock everything
select your objects
invert your selection
hide the now selected objects
export...
bit of a work around but you could do an action to speed it up if you've got a few to do.
hope that helps

How to Export only some tables with procedures and packages

Hi...
I want to export only some tables and packages and procedures. Can anybody please guide me how to do this.
Thanks in advance.......
pal

could you please more elobarate in your question? do you want to export data from tables or you want to get the table structure, source of procedures and packages?
Thanks
M Thiyagarajan

Export - only tables with data

Hai Everybody!
I have a database in Oracle, which is having hundreds of tables. When i export the database, all the tables will be exported into the .dmp file.
i want to export only the tables, which are having atleast one row to the .dmp file.
Can anyone help me by providing the solution.
Thanks
JD

JayaDev(JD) wrote:
version 10gIn 11g, there is feature called "deferred segment creation". It means, if you create a new table and do not insert any data into it, Oracle will not create segment for that table, hence it will not be displayed in dba_segments.
That is why, if you try export that table with exp utility, it will not be exported.

How to export only the data displayed in table of a jsp page to Excel

Hi All,
I want to export only the data that is displayed in the table of a jsp page to excel. But with my current code everything is getting exported to excel.
<input type="checkbox" name="download" onclick = "form.submit()"/> Export to Excel
response.setContentType("application/vnd.ms-excel");
response.setHeader("Content-disposition", "inline; filename=fileName.xls");
the table is displayed in the jsp using the following code:
<table cellspacing="2" cellpadding="3" border="1"
width="100%"> <tr> <%for (int i = 2; i <= cols; i++) {%>
<td>
<%
out.println( rsmd.getColumnName(i) + " ");
} %>
<% while (rsettaba.next ())
out.println("<tr>");
for (int j= 2; j <= cols ; j++) {
//out.println("<td>"+rsetallcl.getString(j)+"</td>");
String varnl = rsettaba.getString(j);
if ( varnl == null )
out.println("<td> Empty </td>");
else
out.println("<td>"+rsettaba.getString(j)+"</td>");
out.println("</tr>");
%>
</td>
</tr>
</table>
please can anyone help how to just extract only the data in the table of a jsp page to excel.
Edited by: Ramky48 on Dec 9, 2009 9:51 PM

Ramky48,
Why did you open a new thread when you had gotten quite a few responses and suggestions on the [url http://forums.oracle.com/forums/thread.jspa?threadID=998411]thread where you asked the same question - seems the best thing to do would be to continue on the same thread?
However, your question has nothing to do with JDeveloper/ADF. If you'd like to do it the ADF way, it's trivially easy - you can use the [url http://download.oracle.com/docs/cd/E15523_01/apirefs.1111/e12419/tagdoc/af_exportCollectionActionListener.html]af:exportCollectionActionListener component, which does what you are asking for. If you want to use a straight JSP way, there were several good suggestions in the other thread you opened, or Googling "jsp export to excel" will get you about 4.6 million hits; the first 10 or so look pretty promising.
John

Display only a part of a blog post in the summary view

Hello,
Has anyone come across an effective way to set the size, either by pixels or the number of characters, that is displayed for blog posts in the summary view? I'm working with a blog that has some very lengthy posts, and we want to reduce the amount that people
have to scroll down the page on the homepage of the blog.
It's worth noting that I've come across a couple different potential solutions, but have had issues because the body of the post is an "enhanced rich text" field.
Thanks in advance for any help!

Hi Bogan,
According to your description, my understanding is that you want to display only a part of the blog post in the summary view.
I recommend to edit the homepage in SharePoint Designer and modify the XSLT to achieve your goal.
Here is a link for you to refer:
http://heatherwaterman.com/2011/05/customizing-the-blog-posts-in-a-sharepoint-blog-template/#lightbox/10/
Here is a similar thread for you to take a look:
http://social.technet.microsoft.com/Forums/en-US/77465d4d-0db7-4736-8358-e9b853a644d7/default-blog-site-summary-view-of-posts?forum=sharepointgeneralprevious
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How do I export only part of a pdf?

how do I export only part of a pdf?

Hi eannablack,
The only way to export part of a PDF is to remove the pages that you want to export. And to do that, you need Acrobat. You are welcome to try Acrobat for free for 30 days. For more information, see www.adobe.com/products/acrobat.html.
Best,
Sara

I have created an extensive slideshow w/music on my MacBook Pro iPhoto. How do I export a slideshow so that I can burn a DVD from it? "Help" does not offer info for this request, only if you want to export to another Apple device. Help!!!

I have created a lengthy slideshow with music on my MacBook Pro under Iphoto. What steps do I need to take in order to burn a DVD copy of this slideshow? "Help" does not offer info for this transaction, only if you want to export to another Apple device and it shows that you must first export to Itunes. Can anyone help me with information on just copying to a DVD? I don't want to email it or show it on another Apple device. I want to be able to burn multiple copies on DVDs as a gift...... Can it be done? I'm not real computer savvy

Connect the device to the computer.
In iTunes, select the content desired to sync.
Sync.
This is all described in the User's Guide, reading it may be a good place to start.

Bridge cs6 export - only hard drive option is present. I want ftp and social network module

I want to export my images right from the bridge. Uploading them to different social sites and ftps is a bit of a hassle and it is easy to forget something in the process. It would be so much better if I could just drag files to desired locations/presets.
I've seen something like that in the blogs (but with lower version of CS) where people have facebook and other options. But I can see only hard drive module.
Is it possible? If so - why don't I have this option? What can I do?

If you don’t see the four modules, click the flyout menu and choose “Manage Modules.”
Make sure all four are checked. If you don’t see the four listed, click the little gear, and from ITS flyout menu, choose “Check for Updates.” When you’re through, click the small “Done” button at the bottom to return to the Export Panel main window.
You can start using the export modules directly, but every time you use them you’ll have to go through a long export process. Use presets to streamline this operation, by saving all the work for re-use. You can create multiple presets; for example, you might have several presets for Facebook depending on whether you want to send the images to your wall, or a specific album. We’ll step through the Facebook setup first.
In the Export Panel, highlight “Facebook” and click on the “+” icon at the bottom to Add a new Preset.
The “Add Preset” dialog appears, and the first thing you will need to do is authenticate with Facebook. Note that you will need to authenticate every time you create a new preset, even with the same service, but you won’t need to authenticate when you actually export your images. Click on “Sign In.”
Two things happen: Your browser will be launched, and you’ll see the authentication page from Facebook. You’ll need to enter your credentials, and you can check “Keep me logged in to Adobe Bridge Export Panel.”
Etc. etc.
You can follow the rest of the instructions here:
http://www.tipsquirrel.com/exporting-from-bridge-cs5-to-social-media-sites/

Want to export only short part of a longer project

Similar Messages

Maybe you are looking for