Want to Install Oracle Lite in Linux.

I have downloaded Oracle Lite for Linux. I use SUSE 7.3. I have unpacked it, but when i type ./runInstaler it says that i need to set the ORACLE_HOME. I would like to know what value do i have to set it to. Or if there is any instalation guide to download becuase i have not found it.
Thanks

Home Edition for test purpose, Yes you can, Try to install Oracle 11gR2 version on windows 7..........
But before install Oracle 11gr2, you need to unzip both files on one folder like below
See my Post If you're not unzip both files on same folder what error comes when you are try to start Enterprise manager
http://mohamedazar.wordpress.com/2010/10/17/cant-locate-compemdbconsole-pm-during-em-dbconsole-creation-oracle-11gr2/
Installation Steps watch my post video ( Grid infrastructure standalone for windows 7)
http://mohamedazar.wordpress.com/2011/01/21/grid-infrastructure-installation-standalone-server-for-windows-video-guide/
Edited by: Azar on Jun 20, 2011 2:40 AM

Similar Messages

  • I want to install oracle 10g on linux.

    i want to install oracle 10g on linux. my linux is red hat enterprise linux AS release 4. i downloaded 10201_database_linux_x86_64.cpio.gz. now, cksum 10201_database_linux_x86_64.cpio.gz shows 4294967295 while site says 2921604215. if i say gunzip /home/oracle/10201_database_linux_x86_64.cpio.gz gunzip: /home/oracle/10201_database_linux_x86_64.cpio.gz: unexpected end of file. now, please clear these doubts and also give me the link to steps on how to install. tnx

    I tried with the following command and it works for me:
    cpio -idcmv < 10*
    without gzip before

  • Problem to install oracle 10g on linux

    Hi,
    I want to install Oracle 10g on Linux
    (I have Linux X76CLLCFAUU 2.6.18-194.17.1.el5 #1 SMP Mon Sep 20 07:12:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux)
    , when i run ./runInstaller, i have the following error , do you known what is the problem :
    Démarrage d'Oracle Universal Installer...
    Vérification des exigences du programme d'installation...
    Vérification de la version du système d'exploitation : il doit s'agir deredhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Echec <<<<
    Fermeture d'Oracle Universal Installer ; le journal de cette session figure à l'emplacement /tmp/OraInstall2010-11-17_05-03-15PM/installActions2010-11-17_05-03-15PM.log

    Hello,
    Vérification de la version du système d'exploitation : il doit s'agir deredhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Echec <<<<So, when the Installer checked the OS Release, it didn't find the correct one.
    The message said that you should have one of this OS:
    Redhat-3, SuSE-9, Redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2As previously posted, you should check from the Installation Guide that you have the right OS requirements before running the Installer.
    Hope this help.
    Best regards,
    Jean-Valentin

  • Can't install Oracle 8 in Linux 6

    I can't install Oracle 8 in Linux 6 because I encounted the
    following error during installation:
    Error during action 'Running startorcl.sql'.
    Command: /u01/app/oracle/product/8.0.5/bin/svrmgrl <<!
    @/u01/app/oracle/admin/orcl/create/startorcl.sql
    exit
    What should I do ? Please help me.
    null

    Bjarne (guest) wrote:
    : Jameshow (guest) wrote:
    : : I can't install Oracle 8 in Linux 6 because I encounted the
    : : following error during installation:
    : : Error during action 'Running startorcl.sql'.
    : : Command: /u01/app/oracle/product/8.0.5/bin/svrmgrl <<!
    : : @/u01/app/oracle/admin/orcl/create/startorcl.sql
    : : exit
    : : What should I do ? Please help me.
    : I got the same error message, and I still haven't figured out
    : what to do. If there are anyone who can help, I think we both
    : would appreciate it. Please help us both.
    Hi there!
    The first thing you should do if you get ANY (almost) error when
    installing Oracle Server in RedHat Linux v6,0 is to read this
    document carefully: http://jordan.fortwayne.com/oracle/
    After hours of struggle it finally worked for me :-)))))
    Only two things to add here:
    1) If you want to be able to connect to the Linux server
    (telnet) and running utilities like sqlplus locally on the
    server, you should copy the ".profile" file to the users home
    directory, add the user to the group "dba" AND make sure that
    the $ORACLE_HOME directory has execute permissions for members
    of the "dba" group (mine had default ONLY permission for the
    owner to execute).
    2) The file "listener.ora" was (for some reason) written
    with "oracle_sid" where it really should say the real SID name
    that is in my case "ORCL".
    I just can't thank the guy who wrote the step-by-step
    Installation guide for Oracle on RedHat Linux enough... THANK
    YOU!
    null

  • How to install oracle rac on linux using virtualbox

    Hi,
    I have recently started working on oracle rac
    I have system with 64 bit os windows 7 installed
    core i3 processor with 6 gb of ram
    I want to install grid infrastructure on linux running as a virtual machine
    how can I install and configure it? Please help me .
    can ubuntu  work as a virtual machine for oracle rac?

    Hi,
    I suggest you use Oracle Enterprise Linux on your lab.  There are a lot of step-by-step guide to install RAC on OEL.  A good example is by Tim Hall, search Google for "Tim Hall Oracle Database RAC Installation".

  • How to Install Oracle 11g on Linux for Power?

    I've installed RedHat Enterprise Linux 5.4 on IBM PowerPC server.
    Now I want to install Oracle 11g on it. But there are no Oracle 11g downloads for Linux for Power.
    Is there any workaround so Oracle 11g can be installed on Linux on Power?

    Hi,
    I think you can forget it. Oracle 10g R2 was the last version supported on Linux PowerPC.
    Cheers,
    David
    OCP 9i
    http://www.oratoolkit.ch/knowledge/howto/installation/otn.php

  • Unable to Install oracle lite 10g mobile server on windows

    Hi all,
    Basically I am a .net developer, i want to explore Oracle Lite 10g mobile database.
    for that I am trying to install Olite 10g Mobile server on my windows system it is installing upto 95%, after that nothing is happening. it is not giving any error message.
    even i waited for 5 to 6 hours then also it is at the same stage.
    In my sytem JDK 5.0 is there and Oracle Database 10g Express edition is also there.
    Please help me on this issue.

    i know that this might be silly but have you checked the guide for the installation and made sure you have all the preq?
    please check
    http://download.oracle.com/docs/cd/E12095_01/nav/portal_booklist.htm
    please check the getting started guide and especially chapters
    3 Requirements Before Installation or Development
    4 Installation of Oracle Database Lite
    i have seen that it says:
    3.3.2 Certified Oracle RDBMS to Use With Oracle Database Lite
    Use one of the following database versions with Oracle Database Lite: Oracle 9.2, Oracle 10g Release 1 (10.1.0), Oracle 10g Release 2 (10.2.0), or Oracle 11g.
    i dont know if the express edition is supported correctly.

  • Who will install ORACLE software on linux production environment?

    Hi Friends,
    there is a doubt for me on ORACLE software installation. i.e. who will install ORACLE software on linux production environment. either system admin or else ORACLE DBA.
    If DBA means, whether system admin will share the oracle root password.,
    If SYS admin means how DBA parameters during installation.
    Regards
    Sakthivel G

    NEW2DBA wrote:
    Hi Friends,
    there is a doubt for me on ORACLE software installation. i.e. who will install ORACLE software on linux production environment. either system admin or else ORACLE DBA.
    If DBA means, whether system admin will share the oracle root password.,
    If SYS admin means how DBA parameters during installation.I have a doubt - about needing any parameters during a software-only install.
    Since every version of Oracle available now (except 11.2) needs patches, a new installation should not create the database right away. Therefore, a software-only install is the most reasonable thing to do. And if no DB configuration parameters are required at s/w-only time, then it makes somewhat sense for the SysAdmin to do the install.
    Therefore, it makes sense to me that the two groups (DBA and SA) might want to work ... together. (ROFLMAO)

  • How can i install oracle 10g on linux cluster

    Dear all:
    please advice How can i install oracle 10g on linux cluster service ..
    thanks ,,

    Without RAC, you can only have one instance manage the database. One instance = one set of processes communicating via IPC.
    Unless you know of a way to have processes use memory-based IPC across nodes, you need to pick a node and install & run the database software on that node.

  • Oui-10207error while installing oracle 10g on linux in vmware

    Hi,
    I have installed vmware on windows 7(64 bit) on which i have installed Oracle Enterprise linux 5. I have set all the variables correctly. but when i try to install oracle 10g on linux, i get the error
    OUI-10207:there is not enough disk space in the OUI swap area /tmp/OraInstall2011-10-17_03-44-48PM.Please make atleast 529KB of space avaivale and retry.
    but i have around 95bg of space. My partitions are as follows
    Device Boot Start End Blocks Id System
    /dev/sda1 * 1 12551 100815876 83 linux
    /dev/sda2 12552 13041 3935925 82 Linux swap/solaris
    /dev/sda3 13042 13054 104422+ 83 linux
    Please help me in solving the problem.
    Thanks
    Viraj

    What is your swap size? try to increase size
    execute below command on terminal, paste result here.
    #swapon -s
    #free
    Tips : how to increase swap space
    http://hackertrip.wordpress.com/2011/09/11/increase-swap-space/

  • Unable to install Oracle Lite 10g on Windows 7 64-bit

    I've tried installing Oracle Lite 10g on my Windows 7 64-bit computer but I get a message saying "JDK is not installed on machine". I even have Java installed on my computer too.
    Any ideas what could be causing the issue?
    Thanks
    Gareth

    Oracle lite 10g is not supported on Windows 7.    The core issue is you are running on an unsupported platform.
    You have may have to go in the docs and figure out what JDKs were supported, i think 1.4 and 1.5. and try
    installing one of those and maybe you can get uninstall to work.   This is just a guess though.
    thanks
    mike

  • Pleae help me: I want to install oracle developer on win server 2008

    please help me i am try to install oracle developer 10g on win server 2008 but failed because the version of operating system not 5 or 5.1 or 5.2 and it is 6
    so i want to install oracle developer 11g on win server 2008 but i am not found oracle developer 11g to download it
    please any one help me to solve this problem or help me to find oracle developer 11g
    Thank you

    Oracle Developler 11g is now called Oracle Fusion Middleware (FMw) 11g and can be downloaded from the Oracle Fusion Middleware Downloads page. You have to download and install WebLogic Server (WLS) 10.3.3 first, then scroll down and download and install Portal, Forms, Reports and Discoverer (11.1.1.3.0).
    When you install WLS, make sure you do not run the configuration step. When you install FMw, it will configure the WLS as part of it's configuration step.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • Cannot install oracle 9i on linux (fedora core 2)

    dear all members.
    I cannot install oracle 9i on linux (fedora core 2)
    progress bar stop at 17% no activity at hardisk. I wait for 15 hours , still no movement. file being copy is " naeet.o " , I am not sure how importance is it.
    I try several times, but still similar result....
    Amnuay U.
    [email protected]

    Hi,
    I think that Feedbak forum is not the best place for this problem.
    You should ask this into
    => Installation Forum : Database Installation
    or
    => Linux Forum : Generic Linux
    Anyway, you can find an install doc here :
    http://ivan.kartik.sk/oracle/install_ora9_fedora.html
    Nicolas.

  • Want to install Oracle Developer Suite 10g R2 on Windows 7 (64-bit)

    Hi,
    I have windows 7 (64-bit) installed on my laptop. I want to install Oracle developer suite 10g R2 on this machine but when I run the Oracle Universal Installer, it gives me error stating "operating system version: must be 5.0, 5.1, 5.2. Actual 6.1 Failed<<<<
    Exiting OUI.
    Can anyone please help me to solve this problem.
    Thanks in advance.
    Regards

    Developer Suite 10 is not certified or supported to be installed on Win7 (64bit). Although it can be done, you will have problems later if you manage to get it installed. If you really want to have it on your Win7 laptop, I encourage you to install "Windows XP Mode", which is part of Windows Virtual PC. This is free to licensed Win7 users (does not apply to Home edition). Refer to the following:
    http://windows.microsoft.com/en-US/windows7/install-and-use-windows-xp-mode-in-windows-7

  • Hi, i want to install oracle 10g on RHEL5(Red hat)  where i can get softwar

    i want to install oracle 10g on redhat5 pls some one tell me where i can get oracle software.

    Hi;
    1. As Paul mention open http://www.oracle.com/technetwork/database/10201linuxsoft-097986.html
    2. Accept license aggrement
    3. As Prabhu mention Prabhu
    Download the Complete Files
    10201_database_linux32.zip (668,734,007 bytes) (cksum - 2737423041)
    use some downloder manager like flashget etc.
    Regard
    Helios

Maybe you are looking for

  • PXI not showing up properly in MAX

    Hey everyone, I'm new to setting up remote systems in MAX and I'm having some difficulty.  I'm using all LabVIEW 2011 versions of software with FPGA and RT modules.  I'll start by listing the hardware I am using: PXI-1042 Chassis PXI-8110 Embeeded Co

  • PS CS5 can't open lightroom 2.7 files??

    Hi, can't someone tell me what's wrong with Photoshop? Previously in Lightroom 2.7 I could right click a picture and select "edit in ps cs5", and then the picture would open up in CS5 without a problem. All of a sudden today, photoshop doesn't open u

  • Problem in BPEL Human task

    I am developing the BPEL process in jdeveloper11g. I used Human task for serial approvers. When I test the service I was able to see the Recive and Callback of human task. I want to Invoke partner link (used for DB adapter) whenever first approval ap

  • If vendor and customer r same how we clear

    Hi if  for the claint both vendor and customer r same in such a case what configuration is need and if clearing is required between both what steps required i know 1 thing only eg in vendor master give customer number ,that thing only i knew , plz ex

  • Lightroom 4 and ACR 6.7

    When I import my photos from Lightroom 4 into ACR 6.7 I get a message, "The selected image uses Process 2012.  Convert to Process 2010 to adjust settings.  When I do this, I lose all of my changes I made in Lightroom 4. Thanks.