Want to know how to register performance mgmt arch with shared services

Hi All
I didn't find any option under EPMA in configuration utility(except deploy to application server) , how to get the remaining options . Did I make any mistake in downloading the software from edelivery. Why I'm unable to see the other options(cofig db, reg with shared services).. Basically where I will find the EPMA software.
thank You
regards
M.V

Transfer an Adobe product license
Mylenium

Similar Messages

I have switched from using a PC to an iMac and want to know how to register Lightroom 5.7 for new Mac?

I have switched from using a PC to an iMac and want to know how to register Lightroom 5.7 for new Mac?

Are you on CC or standalone perpetual licence?
If the former I believe you merely download LR from the CC site onto your iMac and log in and off you go.
If the latter, download LR onto your Mac from the perpetual licence site (not the CC version), install it and use the same licence number as with your PC.

I want to know how to register a preowned CS5.5 with ADOBE and activate it?

I want to know how to register a preowned CS5.5 with ADOBE and activate it?

Transfer an Adobe product license
Mylenium

Need help in registering HFM Sample applications with Shared Services

Hi all,
I have installed HFM 9.3.1 on the server and I have issues in locating the sample application in the HFM console. I want to register the sample application with Hyperion shared services. But when I tried opening the application, I do not see the sample application and also got an error saying,"cannot connect to server".
When I tried creating new application I got an error saying,"there is an error retrieving the user management project list.Please verify that the project exists".
All I want to do is, to provision the shared services users to the HFM sample applications. Could you provide some suggestions to overcome this issue? I'll appreciate your quick response.
Regards,
Leo

Try using the server name instead of the cluster name.

Hi i want to know how i can use my ipod with my itunes because when i connect it it odesnt apper there it just says it cannot be used because apple mobile device is not started

ipod wont apper in itunes say apple mobile device not started

Go here for corrective action.
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

How to register DI RfcSvr as an Windows service

Every time I must manully start DI RfcSvr program on windows. I want to know how to register it as a Windows service?
I try to run below command:
ntscmgr install SAPRFCService -b "D:\Business Objects\BusinessObjects Data Services\bin\rfcsvr.exe" -p "-a DI_SOURCE -g HOST_NAME -x gateway_name"
It successfully register the command to NT service but It can not start. The error message in Event Manager is:
Event ID 7009, Timeout (30000 milliseconds) waiting for the SAPRFCService service to connect. I though this is caused by no return code returned by program rfcsvr.exe.
Anybody has good idea?
TIA

Hi,
I'm in the same situation, I need to know if it's possible to record DI RFCSVR as a Windows service or not.
When I try to start the service, I get the same error
Event ID 7009, Time (30000 milliseconds) waiting for <name Service> of service to connect.
I have searched without success guides.
Any suggestions.

Registering an application with Shared Services

I just used HfmCopyApplication.exe to migrate an application from out production environment to a newly installed test environment. However, when I open in the HFM System 9 thick client in the test environment and try to "Open Application", I can see the new application listed (so I know the migration was successful), but I get a message saying "+This application is not registered with Hyperion Shared Services. Please contact your administrator.+"
Can anyone provide some insight? I don't know how to register an application that was migrated from another environment, and I'm hesitant to create a new application with the same name because I don't want to accidentally wipe the one out that was just migrated over. I've looked through the documentation for the HfmCopyApplication, but it only says that I need to register the migrated app with Shared Services... It doesn't tell me how.
Thanks.

that usually means that Workspace has not been configured to know that HFM is in the environment as well, or that for some reason you don't have access to that option.
On the machine where Workspace web component has been installed you will need to run the System 9 configuration utility and choose the task "Reporting and Analysis" and "Configure Web Server". When you get to the screen which asks you to specify the hostname and port of the individual web servers (Financial Reporting, Web Analysis etc) make sure that HFM is ticked on (checked) and that the hostname and port for the HFM web server are correct (should be port 80). Complete the steps with Next Next Next and Finish, then restart both the Apache http server and the Workspace web server (Tomcat/Weblogic/Websphere etc). After that, the next time you log in to Workspace and go to Navigate->Administer you should see the options relating to HFM.
If it is still not there, go to Help->About->Version Details and check that a version for Financial Management component is displayed. If a version number is displayed then it something to do with your access rights (maybe a Creator / Administrator group has been set in the HFM Server / Web Config utility, try to remove it and try again?). If no version number is displayed then Workspace still doesn't know about HFM component (the above step hasn't worked).
If you are not sure speak to the person who did the installation, or if you have a support contract with Oracle then contact Oracle support.

Registering Planning app with shared services

Hello all.
I created a new classic planning app (11.1.1) with the intention of mirroring our production app. I've copied that outline from the production app to the new app. I've also exported the sql server database used by the production planning app and restored it to the new app. Everything seems fine so far.
My question is about the registration of the new app in shared services. The production app has about 35 MSAD authenticated users. What would be the process for registering the new app with shared services and setting up users from the production app. I didn't specifically register the new app when it was created.
I'm a little apprehensive. I don't want to do anything that might affect the current production app. How can I register the new app and add users without affecting the current production app. Is it as simple as going to Administration -> Applications Settings and clicking on "Register Shared Services" and setting up new users? Or are there other steps that need to occur?
Any help is very much appreciated.
dave

You shouldn't need to register as you would of created a blank planning application at first that will be registered with Shared Serices, then the provisoning of users/groups in shared services for the planning application would be done, then you would migrate the relational database across.
You wil probably need to edit the shared services URL from within planning but no need to reregister.
Cheers
John
http://john-goodwin.blogspot.com/

How to sync user for planning from Shared Services

Hi ..
Can anybody please let me know how to sync users for planning from shared services.
Thank you.

You need to expand on your question.
But the basic concept is you create or connect (for LDAP) users in Shared Services. You also create groups as required for these users. Then in shared services you provision those user to Planning applications (directly or indirectly through groups)
Then in Planning you will see users or groups. And in planning you connect them to either members in dimensions or to objects like Forms, Task lists, Business Rules.
There is therefore no such thing as synching Shared Services with Planning.
Note: the 2 steps mentioned above can be done in batch through load utilities.
Please expand you question if necessary

Hi frnds, i am using iphone 3gs, i want to know how can i update my iphone to ios 4.3.3

hi frnds, i am using iphone 3gs, i want to know how can i update my iphone to ios 4.3.3 or any other ios.

Please note the iPhone 3G can not be upgraded beyond 4.2.1.
If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

Can you slow down a voicemail you are listening to? I can't understand what someone said to me because they spoke too fast. I just want to know how to slow down the voicemail so I can understand her if it's possible.

How can you slow down a voicemail you are listening to? Someone sent me a voicemail and they spoke way too fast for me to understand them. I want to know how to slow down the voicemail so I can understand them if that is possible.

   I have to say, this is so weird because it's actually become this way in the past week maybe, and I'm sure me saying this here will be disputed, ridiculed and belittled, and that's absolutely fair, but I've got to say it... up until a few days ago, my iTunes sync/backup area really would keep more than one backup for my one, single iPhone. They were all timed and dated with a drop-down menu (which appeared if I clicked the restore button) to choose which one I wanted to roll back to, for example. Sure, I'd read about the three backups thing etc. etc. and perhaps I got that wrong or misunderstood, but I can honestly say, I only ever had at the most two backups, that I could drop-down and choose to restore from. They were there. Same iPhone. Different dates.
   At the time, when this seemed to be the case, the backing-up process took quite a while. I would leave it to progress while I went and made a cup of tea, come back and it still wasn't finished running. So, not really AGES, but a little while.
   Now, when I perform a backup, the progress bar almost shoots across to a finish. I'll 'fess up... that worries me most of all. I can live without the luxury of a menu of backups... but if it does it once, I'd like to be sure it does it at all.
Much more importantly though, thank you for your replies so far.
Any further input, even if it's to belittle or shame is totally welcome. I'd like to understand this a bit more.
Thanks again.

I just wanted to know how to stop loading of rss feeds automatically ? In prior to FF 11 the rss feeds would display if there was no internet connection

I just wanted to know how to stop loading of rss feeds automatically ? In prior to FF 11 the rss feeds would display if there was no internet connection but now in newer version it would say live bookmark failed to load and doesn't display any feeds, in previous version it would atleast display feeds but in newer version it won't display anything:(

hello Nitin1234, the handling of live bookmarks was changed quite fundamentally starting in firefox 13 & upwards in order to improve the overall performance of the browser - now rss feeds won't get updated in the background anymore but will only be fetched when you're actively accessing them. this is probably leading to the unwanted side-effect that you're experiencing, unfortunately i don't know any way around that.
nevertheless please [[Update Firefox to the latest version|update firefox to the latest version]] (16.0.1 at the moment) to stay secure on the web, since there have been many [https://www.mozilla.org/security/known-vulnerabilities/firefox.html highly critical vulnerabilities fixed] since firefox 11/13!

I want to know how I can get all my stuff from my iPhone 3 to my new iPhone five after I have already set up from new phone?

I want to know how I can get all my stuff from my iPhone 3 to my new iPhone five after I have already set up from new phone?

You can restore a backup of the old device to a new one. This will erase everything on the new one before restoring, so this may be an issue if you already have data on the new device.
To do a backup of the old device, iTunes is the safest route, in my opinion. Many users have lost photos when performing a restore from an icloud backup.
An icloud backup does not include everything. For example,only photos in camera roll are backed up. Also, music is not backed up since you get it back from itunes and (for purchased music) from the itunes store.
To restore:
http://support.apple.com/kb/HT1766?viewlocale=en_US&locale=en_US
Go to Settings>General>Reset and tap Erase All Content and Settings. This will erase your phone. Then you will go through the setup screens again as you did when your phone is new, and when given the option, select Restore from iCloud Backup.

HT1918 i want to know how to cancel my account

i want to know how to cancel my account i get charged for buying songs when my credit card is not on my account.

If you do not have your card registered to your iTunes Store account, then these are most likely fraudulent charges to your credit card directly rather than an unauthorized purchase through your iTunes Store account. Report the charges as fraudulent to your bank. They will probably cancel your existing credit card and issue you a new one.
Regards.

Hi. I wanted to know how to use my macbook retina to the best of its potential.

This is what the system is currently showing:
EtreCheck version: 1.9.12 (48)
Report generated 21 June 2014 18:32:04 GMT-3
Hardware Information:
MacBook Pro (Retina, 15-inch, Late 2013) (Verified)
MacBook Pro - model: MacBookPro11,3
1 2.3 GHz Intel Core i7 CPU: 4 cores
16 GB RAM
Video Information:
Intel Iris Pro - VRAM: (null)
NVIDIA GeForce GT 750M - VRAM: 2048 MB
Color LCD 2880 x 1800
System Software:
OS X 10.9.3 (13D65) - Uptime: 3 days 9:47:47
Disk Information:
APPLE SSD SM0512F disk0 : (500.28 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.42 GB (266.59 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple Internal Memory Card Reader
Apple Inc. iPhone
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Anywhere
Kernel Extensions:
[not loaded] net.kromtech.kext.AVKauth (2.3.6 - SDK 10.8) Support
[not loaded] net.kromtech.kext.Firewall (2.3.6 - SDK 10.8) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.tunnelbear.mac.tbeard.plist Support
[running] com.zeobit.MacKeeper.AntiVirus.plist Support
[running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.kodak.BonjourAgent.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.kodak.KODAK AiO Annual Opt.plist Support
[loaded] com.kodak.KODAK AiO Firmware Updater.plist Support
[loaded] com.kodak.KODAK AiO Software Updater.plist Support
[running] com.kodak.StatisticCollection.plist Support
[running] com.spotify.webhelper.plist Support
[running] com.zeobit.MacKeeper.Helper.plist Support
User Login Items:
iTunesHelper
Music Manager
Spotify
Google Chrome
Internet Plug-ins:
FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 10.1.10 Support
AdobePDFViewer: Version: 10.1.10 Support
Flash Player: Version: 13.0.0.214 - SDK 10.6 Outdated! Update
Default Browser: Version: 537 - SDK 10.9
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
Searchme: Version: 1.3
Amazon Shopping Assistant: Version: 1.1
Slick Savings: Version: 2.0
Ebay Shopping Assistant: Version: 1.1
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
npsf_uni: Version: sf 3.3.2.1 Support
3rd Party Preference Panes:
Flash Player Support
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 465.12 GB Disk used: 216.84 GB
Destinations:
ZU UK 2013-14 [Local] (Last used)
Total size: 931.51 GB
Total number of backups: 8
Oldest backup: 2014-03-16 03:19:04 +0000
Last backup: 2014-06-07 16:39:22 +0000
Size of backup disk: Adequate
Backup size 931.51 GB > (Disk used 216.84 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
      2% WindowServer
      2% fontd
      1% Google Chrome
      0% mds_stores
      0% com.apple.WebKit.Networking
Top Processes by Memory:
262 MB WindowServer
147 MB softwareupdated
147 MB Google Chrome
131 MB com.apple.MediaLibraryService
131 MB iTunes
Virtual Memory Information:
9.41 GB Free RAM
3.67 GB Active RAM
447 MB Inactive RAM
1.58 GB Wired RAM
78.53 GB Page-ins
0 B Page-outs

Follow these instructions to uninstall MacKeeper. They have been tested with the most recent version of MacKeeper. Earlier versions than the one released in 2012 require more extensive work to uninstall all its components. Never install such junk on a Mac.
If you actually used MacKeeper to alter your system, e.g. "remove excess binaries" or such, you will need to reinstall OS X as well as all your additional software. Uninstalling MacKeeper is insufficient to reverse the corruption it is capable of - once again, that is if you used it.
If you merely installed MacKeeper but did not use it to perform any particular action, the following instructions will suffice.
If you used MacKeeper to encrypt any files or folders, use MacKeeper to un-encrypt them first.
Quit the MacKeeper app if it is running.
Open your Applications folder: Using the Finder's Go menu, select Applications.
Drag the MacKeeper icon from your Applications folder (not the Dock) to the Trash.
You will be asked to authenticate (twice):
You do not need to provide a reason for uninstalling it:
Just click the Uninstall MacKeeper button. You will be asked to authenticate again.
After it uninstalls you may empty the Trash and restart your Mac. All that will remain is an inert log file that does nothing but occupy space on your hard disk.
May I suggest that you review the following setting in System Preferences?
Although you may easily override that setting, it will serve to protect you from inadvertently installing garbage. The overwhelming majority of Macs I come across have the MacKeeper installer file already present in their Downloads folder, often multiple copies of it. The downloaded file itself can do nothing until it is opened and installed, and the above setting (known as Gatekeeper - not to be confused with MacKeeper) will prevent that from occurring.
I wanted to know how to use my macbook retina to the best of its potential.
Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
Don’t install Java unless you are certain that you need it:
Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
Java can be disabled in System Preferences.
Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

Want to know how to register performance mgmt arch with shared services

Similar Messages

Maybe you are looking for