Want to Know the Life of Tool used in Production

Hai Guru,
I have assigned PRT to the Routing and the PRT (Material) is coming and getting the total Quantity required for Production but after production Iam not able to calculate the Actual Quantity (confirmed Quantity). Please guide me how to calculate the formula.
Also give me the Formula to calculate actual quantity & Actual Usuage value.
Regards
Davey

Hi,
Please go through following links which i am providing :
1) http://www.adobe.com/devnet/flash-builder/articles/ascode-coverage.html
2) http://opensource.adobe.com/wiki/display/flexpmd/FlexPMD
3) http://opensource.adobe.com/wiki/display/flexpmd/FlexMetrics
Thanks and Regards,
Vibhuti Gosavi | [email protected] | www.infocepts.com

Similar Messages

Im using a pci-6221 daq-card.I want to know the difference(use)of a line output and a port output.

Im using a pci-6221 daq-card.I want to know the difference(use)of a line output and a port output.

Hello Hellraiser24,
This question has actually been discussed in another thread here:
http://forums.ni.com/ni/board/message?board.id=170&message.id=95895&requireLogin=False
I hope this helps,
E.Lee
Eric
DE For Life!

You want to know the amount of space the transaction log for the Customer database is using. Which T-SQL command would you use?

You want to know the amount of space the transaction log for the Customer database is using. Which T-SQL command would you use?

Forced me to do a little research.
DBCC SQLPERF(logspace)
See also
http://stackoverflow.com/questions/198343/how-can-i-get-the-size-of-the-transaction-log-in-sql-2005-programmatically
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

I got tis ipad 4 wifi and cellular from ireland and i wish to go on my holidays to india with it and use a micro sim from a local carrier for network courage so i want to know the steps u take to activate the micro sim in the ipad .

i got tis ipad 4 wifi and cellular from ireland and i wish to go on my holidays to india with it and use a micro sim from a local carrier for network courage as i dont have wifi in the place tat i am staying so i want to know the steps involed to activate the micro sim in my ipad.

What roaming charges? If you have a local plan there are no roaming charges. This is a major reason for using a local plan.
Contact, or visit the website, whatever local provider you are considering and get their plan details.

I want to know the top 10-20 Store procedures used in the table.

Hello All,
There are total 3500+ Store procedures created in the server. So, I want to know the top 10-20 Store procedures used in the table. Like which store procedures are important and what are they, is there any code to find them?
I think the question might be very silly, but i don't know which store procedure to look at it.
Please help me on this issue.
Thanks.
Thanks, Shyam.

By what? CPU? Memory? Execution count?
Glenn Berry wrote this
-- HIGH CPU ************
-- Get Top 100 executed SP's ordered by execution count
SELECT TOP 100 qt.text AS 'SP Name', qs.execution_count AS 'Execution Count',
qs.execution_count/DATEDIFF(Second, qs.creation_time, GetDate()) AS 'Calls/Second',
qs.total_worker_time/qs.execution_count AS 'AvgWorkerTime',
qs.total_worker_time AS 'TotalWorkerTime',
qs.total_elapsed_time/qs.execution_count AS 'AvgElapsedTime',
qs.max_logical_reads, qs.max_logical_writes, qs.total_physical_reads,
DATEDIFF(Minute, qs.creation_time, GetDate()) AS 'Age in Cache'
FROM sys.dm_exec_query_stats AS qs
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) AS qt
WHERE qt.dbid = db_id() -- Filter by current database
ORDER BY qs.execution_count DESC
-- HIGH CPU *************
-- Get Top 20 executed SP's ordered by total worker time (CPU pressure)
SELECT TOP 20 qt.text AS 'SP Name', qs.total_worker_time AS 'TotalWorkerTime',
qs.total_worker_time/qs.execution_count AS 'AvgWorkerTime',
qs.execution_count AS 'Execution Count',
ISNULL(qs.execution_count/DATEDIFF(Second, qs.creation_time, GetDate()), 0) AS 'Calls/Second',
ISNULL(qs.total_elapsed_time/qs.execution_count, 0) AS 'AvgElapsedTime',
qs.max_logical_reads, qs.max_logical_writes,
DATEDIFF(Minute, qs.creation_time, GetDate()) AS 'Age in Cache'
FROM sys.dm_exec_query_stats AS qs
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) AS qt
WHERE qt.dbid = db_id() -- Filter by current database
ORDER BY qs.total_worker_time DESC
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

I want to use my ipad to display song lyrics. I have all the lyrics on my computer in Word format and want to know the easiest way to convert them to my ipad and what apps I should use..

I want to use my ipad to display song lyrics. I have all the lyrics on my computer in Word format and want to know the easiest way to convert them to my ipad and what apps I should use.

I would just leave them in Word...GR reads many formats very easily.
If our goal is to work on/edit the files it may be useful to look into something like Pages if you have a Mac, and the Pages for iOS devices so you could use the same word processor on both machines.
But if you convert the Word to PDF and then use GR you can still edit the files...GR will edit and annotated PDF files rather easily.

Well,Most of the time I use Firefox,but that is without making it my default browser,I want to know the benefits of making Firefox my default browser,Please do let me know.

I want to know the benefits of making Firefox as my default browser.If I do not make IT my default browser then what will be my loss ? Most of the time I use Firefox.Please help me intime.Thank You. I am using Windows Vista,Firefox 10.0.2.

Making Firefox the default simply tells Windows that you want to use Firefox to open anything on the internet. You are still able to access other browsers, it just uses Firefox to open stuff like links in emails, docs, etc. instead of Internet Explorer.
It is really a personal choice, if you want to use Firefox the majority of the time, I'd set it as default, it just makes thinks easier.

I want to change the email that iCloud uses to send security answers to and i don't know how.

Hi, i just installed my mavericks and i was going through all my settings and keychains and everyting. Last month i deleted the email account that i think we use to send the answers of the security questions on and i forgot the answers. I want to change the email that iCloud uses to send security answers to and i don't know how. Can it be done?

You need to contact Apple. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(91794)

HT201493 I use Friend finder. I just want to know the date when I added my friends? Can anybody tell me how?

I use Friend finder. I just want to know the date when I added my friends? Can anybody tell me how?

bobseufert wrote:
I thought it was a great way to lose friends. I don't know one person that would want me to be able to track their location.
I absolutely agree. I use Glympse if I need to let someone know my whereabouts for a short period of time. But, beyond that, ick!

I want to know the function moulde used to convert the unit of measure

The whole process should be done in the Portugues login language.
For the login language PT( Portuguese). In table MARA, if i choose the menu settings-> use parameters-> and chek this field (conversion field exit) . Then for any material if i check the unit of measure (MEINS), is display of all the material its shows differently, but if i select one material and see all the fields of that material, the MEINS field is changed. For example when all the materials are show the MEINS is ST. but when i select one material and display it . it shows PEC in portugues language.
I want to know the function moulde used to convert the unit of measure

HI,
There exits the conversion routine for that particular field in its domain level..
copy that conversion routine and search for that in SE37 your conversion routine
you will find the function module this gives you the internal and external formats
Fms are listed below for MEINS
CONVERSION_EXIT_CUNIT_INPUT    Conversion exit for commercial (3-char) measurement unit INPUT
CONVERSION_EXIT_CUNIT_OUTPUT   Conversion exit for commercial (3-char) measurement unit OUTPUT
For convertiung quantity into base unit of measure you can do this way
CALL FUNCTION 'ME_CONVERSION_MEINS'                       "#EC *
    EXPORTING
      i_matnr             = "give material number"
      i_mein1             = "Unit of measurement "
      i_meins             = "base unit of measure
      i_menge             = "quantity
    IMPORTING
      menge               = "quantioty in your required measurement
    EXCEPTIONS
      error_in_conversion       = 1
      no_success                = 2
      OTHERS                    = 3.
HOpe this helps you
Reward if useful
regards,
nazeer
Message was edited by:
        nazeer shaik

I want to know the difference between Days column and Day1 Column

Hi All,
I used this query:
SELECT to_char(return_date_time,'dd/mon/yyyy hh24:mi:ss') Test,
DECODE ('I', 'I', DECODE (1, NULL, NULL, 0, NULL, SYSDATE + 1)) Days,
DECODE ('I', 'I', SYSDATE + 1) Day1
FROM fm_curr_locn
WHERE patient_id = 'DU00002765'
output:
Test
Days
Day1
26/oct/2013 00:00:00
26-OCT-13
10/26/2013 3:06:59 PM
I want to know the difference between Days column and Day1 column and why the days column didnt show the time
Please anyone help.....
Regards
Shagar M

Pleiadian wrote:
It is the decode statement that is doing this.
The format of decode is:
decode(expression, search1, result1, search2, result2, searchn, resultn, default)
All result fields must be of the same datatype and will be of the datatype of the first result (result1 in this example)
In your example (the decode for the field Days) the first result is a NULL. I suspect (gurus? anyone?) that Oracle will use the varchar2 overload of the decode statement, and the date field will be converted to varchar2 using your NLS_DATE_FORMAT settings.
In the second decode statment (Day1) the first result is of datatype date, so the result of the decode statement will be a date field (and will be parsed as such by your sql development tool)
I agree, as NULL is the first result returned the datatype is undetermined, so Oracle is picking VARCHAR2 over others, and causing an implicit datatype conversion on the resultant date value, whereas the other which is returned as a date will use the local settings of the client tool being used.
I can replicate the 'issue' in Toad, and it's rectified if we cast the first returned value of the decode statement...
SELECT DECODE ('I', 'I', DECODE (1, NULL, CAST(NULL AS DATE), 0, NULL, SYSDATE + 1)) Days,
DECODE ('I', 'I', SYSDATE + 1) Day1
FROM dual

I want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged

i want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged
pls give braef intro about all this things, i have searched on sites but i am not getting exact thing and meaning pls help
and i wnat to complete hardware exam of mac what should i do
thanks
vicckey

GSX, if you're referring to Apple's service by that name, is available only to employees of Apple-authorized service providers or self-servicing accounts. Unless you are employed by such an organization, you cannot access GSX. If you are employed by such an organization, they should set you up and give you the appropriate login information.
If you are interested in becoming a certified Apple hardware technician, you can find information here:
http://training.apple.com/certification/acmt
Please note, though, that certification does not in and of itself give you access to any of the Apple resouces for support organizations; diagnostic tools, parts ordering, etc. You again must be employed by an authorized Apple support provider before you can gain such access.
I have no idea what "knowlaged" might be.
Regards.

I have pavilion g6 1313 ax. I want to know the full process of partition.

I have a hp pavilion G6 1313AX with OS windows 7 64-bit. i had deleted the recovery partition(D). i want to know the full process of partition of the HDD or if there is any way of doing partition without effecting the current OS. The size of C- is 441 gb nd i wanna to reduce it.

You could use a partition program like partition magic but I would still make sure you have all your important pictures and documents saved to an external device or copied to another machine just in case.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

I purchased CS5 Design Standard about 5 years ago. Now I am trying to install second PC, but I got a message like " This serial number is not correct." I want to know the correct serial number, but I missed my ex adobe ID because I've changed my E-mail

I purchased CS5 Design Standard about 5 years ago. Now I am trying to install second PC, but I got a message like " This serial number is not correct." I want to know the correct serial number, but I missed my ex adobe ID because I've changed my E-mail address.

It is not clear to me what your issue is with not being able to sign in to your Adobe account to find the serial number. You should still be able to sign in and find your serial number if you registered the software.
If your first PC is a Windows machine you might be able to extract the serial number from it using the Belarc Advisor
http://www.belarc.com/free_download.html

How do i connect my macbook pro to another screen (a fujitsu siemens) i got the cable for it but i want to know the settings so i transfer desc to the fujitsu screen.

How do i connect my macbook pro to another screen (a fujitsu siemens) i got the cable for it but i want to know the settings so i transfer desc to the fujitsu screen.

Welcome to Apple Support Communities
If you have the cable, just connect it to both and the desktop will show up on the external display. Then, you can select different modes, changing arrangement in System Preferences > Displays > Arrangement, or using shortcuts > http://support.apple.com/kb/ht5019

Want to Know the Life of Tool used in Production

Similar Messages

Maybe you are looking for