Want To Lock A MacBook Screen Instead Of Putting It To Sleep?
The best way I found is to make a hot corner to start the screen saver. Then, you don't have to log off and stop all your services. You just come back and click the screen, enter your credentials, and... BOOM! that's it!!
Here's where you start. Click on System Preferences and click the Desktop & Screen Saver icon.
Then click on Hot Corners on the lower right corner.
Then, select from the dropdown menu the Start Screen Saver option for the corner you want it to be activated from and click Ok. For me, I selected the upper right corner.
So, now all I need to do is push my pointer to the upper right corner all the way for a couple seconds and the screen saver starts. When I get back, I just touch my mouse or touchpad and the password dialog box appears.
Basically all you need do is power everything down; modem, router, computers. Then power up in 2 minute sequences; modem, router, computers in turn. However, you should read the manual of your new Netgear router so you set it up properly. Having gone through this I can say it is quit easy. Don't use the CD supplied. Connect your Mac to one of the router's LAN ports; power the router and the Mac. Launch a web browser. You should get the router's admin page. default user name is 'admin'. Default password is 'password'. You should at least change the password so no one outside can gain access to your router. Then you should change the name of the SSID to whatever you want to call your network. Then you should set up your wireless access password protected. Then power every thing down and set up the network as above. There are tweaks you can add. If you have issues post back.
Similar Messages
-
MacBook Pro mid 2010 putting itself to sleep and restarting on wake-up?
My mid 2010 MacBook Pro has recently started having a lot of problems. It will put itself to sleep whilst I am working on it, and when I try tp wake it up it restarts showing a message saying 'Your computer restarted because of a problem. Press any key to continue..' however it doesn't tell me what the problem is. This can happen every 5 minutes or once an hour but it is becoming very irritating. I have previously done a PRAM and SMC restart, they made no difference. I can't think of any recent programmes I have installed to cause this problem, other than updating to mountain lion 10.8.5. Im not very computer savvy either, so understanding much of what is online is not easy.
This is the last panic report:
Interval Since Last Panic Report: 53736 sec
Panics Since Last Report: 8
Anonymous UUID: 255BB8B7-DD42-3D95-B10D-69FD9725FBD0
Wed Oct 16 11:29:24 2013
panic(cpu 2 caller 0xffffff7f87a6ff1a): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff80925a3000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.5/src/AppleM uxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 2), Frame : Return Address
0xffffff80815bb220 : 0xffffff800581d636
0xffffff80815bb290 : 0xffffff7f87a6ff1a
0xffffff80815bb360 : 0xffffff7f85f7026c
0xffffff80815bb420 : 0xffffff7f860431f6
0xffffff80815bb460 : 0xffffff7f86043254
0xffffff80815bb4d0 : 0xffffff7f86308278
0xffffff80815bb600 : 0xffffff7f8606bad1
0xffffff80815bb620 : 0xffffff7f85f7703f
0xffffff80815bb6d0 : 0xffffff7f85f74ad6
0xffffff80815bb8d0 : 0xffffff7f85f763ff
0xffffff80815bb9a0 : 0xffffff7f86f5b903
0xffffff80815bba00 : 0xffffff7f86f5b993
0xffffff80815bbad0 : 0xffffff7f86f3b610
0xffffff80815bbb30 : 0xffffff8005c6f789
0xffffff80815bbb50 : 0xffffff8005c70d30
0xffffff80815bbbb0 : 0xffffff8005c6e74f
0xffffff80815bbd00 : 0xffffff8005898c21
0xffffff80815bbe10 : 0xffffff8005820b4d
0xffffff80815bbe40 : 0xffffff8005810448
0xffffff80815bbe90 : 0xffffff800581961b
0xffffff80815bbf00 : 0xffffff80058a63ee
0xffffff80815bbfb0 : 0xffffff80058cf221
Kernel Extensions in backtrace:
com.apple.driver.AppleMuxControl(3.4.5)[49FEF732-D7A3-327B-A7AA-6AC5A6E3DCFF]@0 xffffff7f87a62000->0xffffff7f87a74fff
dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[B5B1F368-132E-3509-9ED5-93270E3ABB DD]@0xffffff7f87a5d000
dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff 7f85e75000
dependency: com.apple.driver.AppleGraphicsControl(3.4.5)[4A2C8548-7EF1-38A9-8817-E8CB34B8DC A6]@0xffffff7f87a49000
dependency: com.apple.iokit.IOACPIFamily(1.4)[A35915E8-C1B0-3C0F-81DF-5515BC9002FC]@0xfffff f7f85df3000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[F16E015E-1ABE-3C40-AC71-BC54F4BE442E]@0xff ffff7f85efb000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[9928306E-3508-3DBC-80A4-D8F1D87650D7]@0 xffffff7f85eb8000
com.apple.NVDAResman(8.1.6)[EA4F9902-5AAE-3F1D-A846-3796221C8C91]@0xffffff7f85f 0f000->0xffffff7f861b1fff
dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff 7f85e75000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[F16E015E-1ABE-3C40-AC71-BC54F4BE442E]@0xff ffff7f85efb000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[9928306E-3508-3DBC-80A4-D8F1D87650D7]@0 xffffff7f85eb8000
com.apple.nvidia.nv50hal(8.1.6)[3455BCFE-565A-3FE5-9F0B-855BCB6CC9B3]@0xffffff7 f861bd000->0xffffff7f86490fff
dependency: com.apple.NVDAResman(8.1.6)[EA4F9902-5AAE-3F1D-A846-3796221C8C91]@0xffffff7f85f 0f000
dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff 7f85e75000
com.apple.GeForce(8.1.6)[0E3D8776-A5B7-3D82-9BFD-9188170B358D]@0xffffff7f86ef70 00->0xffffff7f86fc4fff
dependency: com.apple.NVDAResman(8.1.6)[EA4F9902-5AAE-3F1D-A846-3796221C8C91]@0xffffff7f85f 0f000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[F16E015E-1ABE-3C40-AC71-BC54F4BE442E]@0xff ffff7f85efb000
dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff 7f85e75000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[9928306E-3508-3DBC-80A4-D8F1D87650D7]@0 xffffff7f85eb8000
BSD process name corresponding to current thread: Microsoft PowerP
Mac OS version:
12F45
Kernel version:
Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64
Kernel UUID: EA38B02E-2B88-309F-BA68-1DE29F605DD8
Kernel slide: 0x0000000005600000
Kernel text base: 0xffffff8005800000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 545542530158
last loaded kext at 48949381648: com.apple.iokit.IOBluetoothSerialManager 4.1.7f2 (addr 0xffffff7f86a59000, size 57344)
last unloaded kext at 155032678245: com.apple.driver.AppleUSBUHCI 621.4.0 (addr 0xffffff7f8674f000, size 65536)
loaded kexts:
com.apple.iokit.IOBluetoothSerialManager 4.1.7f2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.13.12
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.4.7fc4
com.apple.GeForce 8.1.6
com.apple.driver.AppleUpstreamUserClient 3.5.12
com.apple.driver.AppleMikeyDriver 2.4.7fc4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.1.7f4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.3d0
com.apple.driver.AppleSMBusPCI 1.0.11d1
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.ApplePolicyControl 3.4.5
com.apple.driver.AppleIntelHDGraphics 8.1.6
com.apple.driver.AppleIntelHDGraphicsFB 8.1.6
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.6.3
com.apple.driver.AppleMuxControl 3.4.5
com.apple.driver.SMCMotionSensor 3.0.3d1
com.apple.driver.AppleUSBTCButtons 237.1
com.apple.driver.AppleUSBTCKeyboard 237.1
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBCardReader 3.3.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.5
com.apple.driver.AirPort.Brcm4331 615.20.17
com.apple.driver.AppleUSBHub 635.4.0
com.apple.driver.AppleAHCIPort 2.6.6
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.iokit.AppleBCM5701Ethernet 3.6.2b4
com.apple.driver.AppleUSBEHCI 621.4.6
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleACPIButtons 1.8
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.8
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 214.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2.1
com.apple.driver.AppleIntelCPUPowerManagement 214.0.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.4.7fc4
com.apple.iokit.IOAudioFamily 1.9.2fc7
com.apple.kext.OSvKernDSPLib 1.12
com.apple.nvidia.nv50hal 8.1.6
com.apple.NVDAResman 8.1.6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.1.7f2
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOBluetoothFamily 4.1.7f2
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.driver.AppleHDAController 2.4.7fc4
com.apple.iokit.IOHDAFamily 2.4.7fc4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.4.1d13
com.apple.driver.AppleGraphicsControl 3.4.5
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.driver.AppleSMC 3.1.5d4
com.apple.driver.AppleUSBMultitouch 237.3
com.apple.iokit.IOUSBHIDDriver 623.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.6
com.apple.iokit.IOUSBMassStorageClass 3.5.2
com.apple.driver.AppleUSBMergeNub 621.4.6
com.apple.driver.AppleUSBComposite 621.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.5
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.6
com.apple.iokit.IO80211Family 530.5
com.apple.iokit.IOAHCIFamily 2.5.1
com.apple.iokit.IOUSBUserClient 630.4.4
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 635.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.8
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.53 GHz, 4 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533654465238432D47372020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533654465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.17)
Bluetooth: Version 4.1.7f2 12718, 3 service, 13 devices, 3 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9500325ASG, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 8
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 4
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0237, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3
ThanksYou have the MacBookPro6,2, the Edsel of Macs. It may be covered by this program:
MacBook Pro (15-inch, Mid 2010): Intermittent black screen or loss of video
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider, to have the machine tested. The routine hardware diagnostics used by service providers may not detect the fault. There is a specific test for this issue.
Print the first page of the panic report, and the support page linked above, and bring them with you.
Note that the replacement program only applies within three years of purchase. If you wait beyond that date, Apple may refuse the service. In that case, you'll be quoted a price of about $300 (in the U.S.) for a depot repair. The model was discontinued in February 2011, so the replacement program will be ending quite soon.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Sometimes the replacement part is also defective, so be prepared for that possibility.
If it's too late for your unit to be repaired under the program, and you don't want to pay for a new logic board, you may be able to stop the panics by disabling automatic graphics switching.
*An SSD doesn't need to be zeroed. -
Should I be turning off my macbook at night or putting it to sleep?
I just got it and my last HP laptop was horribblee the battery life was so short. I want to keep this running as good as possible and keep the battery life good and not mess up this laptop too. I use it everyday and I keep it plugged in mostly but is it safer to turn it off at night or just put it to sleep?
Sleep.
Have a happy Mac experience-- -
Ant ideas what might be wrong, or how to fix it?
Thanks!jellybell wrote:
Ant ideas what might be wrong, or how to fix it?
Thanks!
Your caches may be corrupted. Try a Safe Boot by pressing the Shift key. You should see a progress bar. It's important to let this Safe Boot run its course without interruption; otherwise, you can trash the file system badly enough to require a restore from backup. (Been there, done that. Lesson learned!) -
MacBook screen freezing.
The screen on my MacBook keeps freezing, and it is only when I hold the sides of the screen that I am able to use to momentarily. I'm out of warranty and I don't know how I can fix it. Does anyone know how I can go about fixing this issue?
I may have (had) this same problem ... until I got it fixed today. My "fix" may provide you with some insights if your case is similar to mine, i.e. screen suddenly goes dark while I'm using it (like 99% dark - you may still see some faint outline of what was on the screen before it got dark) ... and tilting the screen may (or may not) bring the screen back (to normal) ... and you know the program (or music) is still running (while the screen is black). At times, the screen would flicker slightly ... before it goes dark, but it would resume if/when I touch a key. For the past few months, I would close the screen panel down (put it to sleep) then open it up to get the bright screen again. When that stopped working, I would tilt the screen at various angles hoping to get the screen (backlight) on again.
I called Apple Support, and they wanted $49 before they start to diagnose the problem (over the phone) because my MacBook is out-of-warranty. (I bought it in June 2008). Anyways, I searched the web and figured out that the inverter board and/or cable (to the screen - on the left hinge of the screen panel) is the problem. It seems like a common problem with MacBooks. So, I brought it into an Apple store (Genius Bar) and got these parts replaced. It's a simple job ... and it did the trick.
If you're a do-it-yourself person, you can get the parts (from Apple) and replace the components yourself. For some ideas of how to disassemble your MacBook (or other Apple computer), check out: http://www.powerbookmedic.com/mac-repair.php -
Macbook Pro drains a lot battery when sleep
When I put my computer to sleep it drains a lot battery life. Today I put my computer to sleep for a hour and it drained 3%. My computer is 3 months old and the battery only has 55 charges on it.
Good evening chilei89,
What you have reported seems absolutely fine to me. If you truly are concerned about your MBP only consuming 3% of battery power while it is asleep then you can try changing your battery consumption settings. You may also try plugging in the AC adapter or just shutting it down instead of putting it in sleep mode if you are not going to use it for a while and you are not going to use the AC adapter. I hope this helps you out. Again, I don't see anything you have to be concerned about. Thank you.
AMMOCAN -
17 inch March 26-29 (order date – shipping date) 2011 MacBook Pro, 256GB Solid State Drive, 2.3 GHz Quad-core Intel Core i7, 1 processer, 4 Cores, 256 KB L2 Cache per core, 8 MB L3 Cache, 8 GB Memory (8GB 1333MHZ DDR3 SDRAM - 2X4GB), AMD Radeon HD 6750M Video Card, Intel HD Graphics 3000 with 512 MB total of VRAM. 110 GBs of free/unused disk space remaining.
Full Specs are in subsequent post.
The issues described in the title continue even after I’ve reinstalled the operating system twice (Snow Leopard) and installed Mavericks (which is working fine and even faster). I’ve tried many commands to repair this.
If anyone has experienced any of the symptoms above or below, your advice and response will be much appreciated as well as marked. These are the details:
My Early 2011 MacBook Pro has had the typical blue screens, screen freezes and graphics issues since I bought it about three years ago but nothing like this and NEVER any load issues until about a month ago. That was when my superdrive replacement was put in.
Since then my MacBook Pro will go into hard freezes or kernel panics. Then I’ll have to power it down manually and power it up manually. It’ll then refuse to load the OS until after multiple tries. It started out just 2 or 3, then 4 or 5, then 6-12, then 20. Now it takes over 30 boots to load the OS. These boot issues also occur even if it doesn’t freeze, i.e.: when I shut it down or restart it naturally (via the Apple menu, etc.).
95% of the time it’ll load to a gray screen instead of the OS. 4% of the time it’ll load to a light blue screen. Then there are the others: the first time this happened it loaded to the striped purple and teal screen shown in the picture. This happened the next four times then intermittently for about 5 or so more times.
It also loaded gray flickering screens. Flickering screens also occurred right before it froze and had to be manually powered down and up. Then it began to load regular gray and light blue screens and all flickering screens stopped. And then bright blue screens a couple times intermittently for a few days, sometimes with lines. Sometimes it’ll load to a blank/black screen as well. I’d reset the NVRAM and SMC but it still continued, happening multiple times a day, each time taking more and more hard shut downs and hard power ons to finally load the OS.
Until I installed Mavericks, every time it finally loaded the OS Finder began indexing. After Mavericks this has occurred 95% of the time.
After talking to Apple Support they had me do a NVRAM and SMC reset again over the phone. The MacBook Pro refused to load the entire time we were on the phone. After the call it got worse. It froze over 6 times that day and at worse took over 30 boots to load the OS.
I finally had time to deal with it the next day when it froze again. After over 25 boots it loaded and I put in the Snow Leopard OS dvd and ran Disk Utility. I verified the hard drive and it said it was fine. Repaired the disk anyway and it gave this message at the end:
“Updating boot support partitions for volume required”.
Next I tried to start in safe mode and it just hung up for hours. Then started up in single mode and it loaded the OS. It then loaded normally for three times in a row. I reinstalled Snow Leopard. Everything loaded normally. I waited an hour or so and then I downloaded Mavericks. 5 or so hours later Mavericks was installed. Everything hardware wise was fine for a day and all software issues were easily fixable incompatibilities. My Mac was even faster with Mavericks. However, Photoshop did give a perhaps relevant message:
“Photoshop has encountered a problem with the display driver, and has temporarily disabled GPU enhancements. Check the video card manufacturer’s website for the latest software.
GPU enhancements can be enabled in the Performance panel of Preferences.”
(I have OpenGL enabled in Photoshop and it was already checked when this error occurred).
Two days ago I went to Disk Utility to repair permissions while logged in to a non-admin account. Verified and repaired the disk, then verified permissions. Everything fine. After repairing permissions however, it gave a weird error box:
"Unapproved caller, SecurityAgent may only be invoked by Apple software".
The box stayed “stuck” in the Disk Utility window. My MacBook Pro then failed to do anything. I manually powered it down and up. It loaded to a gray screen with the error message box again: "Unapproved caller, SecurityAgent may only be invoked by Apple software".
It then refused to load anything else but this message box on a gray screen even after rebooting it multiple times in safe, verbose and single modes and after resetting the NVRAM and SMC. I went online with an iPad and entered in the error and got some advice. I tried to run fsck and erase the /var/folders/ via single user mode but it still loaded to a gray screen with the error message. I just decided to skip to the end and Cmd-R loaded into recovery mode and reinstalled Mavericks again. That worked: the message has not appeared since.
Some people have said this error is related to a hard drive cable failure. I know that this cable was tampered with during the optical drive replacement procedures because I watched them do it.
Everything was fine for a day. Then yesterday my MacBook Pro froze while trying to open a VLC file. It took 12 boots to load the OS. I tried single mode once and verbose mode once. 10 times it loaded to gray screens, even in those mode. A Safe boot lead to a bright blue screen. Finally reset the SMC and it loaded on the 12th time.
Just five hours ago the same thing happened except it took over 30 boots to load the OS. Single, verbose and normal boots, NVRAM and SMC resets lead to gray screens. Safe boots lead to bright blue screens with and without lines (see pictures). Finally loaded on a normal boot.
I know I should have tried safe booting, verbose, single and recovery modes, disk utility, fsck and other command methods earlier this month but in the end, these methods have not solved the problem anymore than resetting the NVRAM or SMC.
There seems to be conclusive evidence that it’s a hardware problem, stemming from last month, the FIRST AND ONLY time my MacBook Pro was opened up. Maybe it’s the hard drive cable, but it could also be the graphics card and/or logic board (something that’s always been defective on this MacBook Pro, in my opinion). Many early 2011 MacBook Pro owners have given evidence to the latter possibility online.
The first time it started it seemed to stem from me using iPhoto and Photoshop a lot. I had both running continuously for about two weeks. This is another reason for suspecting the graphics card/logic board is at fault (in addition to three years of screen/graphics glitches). And since the card is soldered to the board and the board connected to the cable...I also have serious battery draining issues, something else that got bad after the Apple Superdrive repair. And the battery is connected to the board...
Also, since downloading Mavericks, windows from every app get blurry/fuzzy when I scroll or zoom in. I have read that this is happening to a lot of folks though for various reasons.
I guess it could always be the hard drive. I just don’t know. I’m taking it in to Apple, but can't right away because it’s not local. I know they’ll be able to run a test on the hard drive. I wanted to see if anyone else has had this problem (especially the purple and teal striped screen) before they start poking around, possibly creating another problem that goes beyond my Apple Care Plan allotment.SPECS OF MY MACBOOK PRO:
Model Name: March 26-29 2011 MacBook Pro (order date – shipping date)
Model Identifier: MacBookPro8,3
Processor Name: Quad-core Intel Core i7
Processor Speed: 2.3 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 8 MB
Memory: 8 GB Memory (8GB 1333MHZ DDR3 SDRAM - 2X4GB)
HARD DRIVE: 256GB Solid State Drive
DISPLAY: MBP 17" HR Antiglare WS Display
AMD Radeon HD 6750M:
Chipset Model: AMD Radeon HD 6750M
Type: GPU
Bus: PCIe
PCIe Lane Width: x8
VRAM (Total): 1024 MB
Vendor: ATI (0x1002)
Device ID: 0x6741
Revision ID: 0x0000
ROM Revision: 113-C0170L-573
gMux Version: 1.9.24
EFI Driver Version: 01.00.573
Intel HD Graphics 3000:
Chipset Model: Intel HD Graphics 3000
Type: GPU
Bus: Built-In
VRAM (Total): 512 MB
Vendor: Intel (0x8086)
Device ID: 0x0126
Revision ID: 0x0009
gMux Version: 1.9.24
Displays
Color LCD:
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Battery Information:
Model Information:
Serial Number: C01111403GLDGKMAE
Manufacturer: DP
Device Name: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0406
Hardware Revision: 0001
Cell Revision: 1102
Charge Information:
Charge Remaining (mAh): 4583
Fully Charged: No
Charging: Yes
Full Charge Capacity (mAh): 7765
Health Information:
Cycle Count: 276
Condition: Normal
Battery Installed: Yes
Amperage (mA): -4487
Voltage (mV): 11306
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 15
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: No
Current Power Source: Yes
Display Sleep Uses Dim: No
GPUSwitch: 2
Battery Power:
System Sleep Timer (Minutes): 15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 5
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: No
GPUSwitch: 2
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 85
Revision: 0x0000
Family: 0x0085
Serial Number: 0x007ad8c5
Charging: Yes
Current operating system: 10.9.3 (Mavericks) ; Installed on 6/21/14
Previous operating system: 10.6.8 (Snow Leopard); Installed 4/4/11
Reinstalled multiple times. Last reinstall: 6/21/14 -
How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?
I learned that the Dock is positioned at the chosen edge of whatever Display is positioned farthest to that side. E.g. for the Dock to be positioned on the right side of the Cinema Display (instead of the right side of the MacBook), the Cinema Display must be oriented (by dragging) to the right of the MacBook monitor on the "Arrangement" tab of the Displays Preference Panel.
-
I want to mirror my MacBook Pro's screen to my HDTV. I had it at one time by clicking the Mirror Icon on my upper menu bar but I do not have it any more?
What am I missing? In the System Perferences the display menu seems incomplete. There is no where in there to set my MacBook Pro to mirroring.
Can someone please help me?
I would apprecate any help I get.
ThanksThe mirroring selection is in the "Arrangement" tab and only shows up on the MacBook Pro LCD, not the external display.
-
We are wondering if we can use airplay monitoring to share screens from a single macbook to multiple apple tv's. We want to "broadcast" the same screen to monitors in different rooms
Thanks for the help.No
-
I have adobe acrobat 11 reader writer I want to use the pointer symbol on full screen instead of the hand, iwas able to do it on adobe 10 also when in full screen i can't open attachments unless i right click and open it then it boots me out of full screen is there any way i can click on the attacment without going out of full screen
I don't know why the change, but the pointer appears in the same way as it does on the main screen, not a pointer. There does not appear to be anyway to change it. You may want to submit a comment to the Features Requests: Acrobat Feature Requests. I also submitted this as a bug.
As a clarification, your "adobe acrobat 11 reader writer" is not informative. There is Acrobat 11 and Reader 11. Writer is not a product as such. So you have referred to Acrobat in a contradictory manner. In the future, please just indicate Acrobat 11 or Adobe Acrobat 11. -
Can I move my iWeb from mac-mini to my new macbook pro ? iLife 11 does not have iWeb and I really want to use it to update my website on my new macbook Pro instead of Mac mini
There is no license required for iWeb. Just do a Wyodor suggested and you'll be ready to go. If you're running Lion however, consider the following:
In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT -
MacBook Pro won't download, taken to dark gray screen instead.
When I click on a download link or pdf file link I am taken to a dark gray screen instead of starting the download or viewing the pdf. This just started happening. I haven't made any changes and installations to my Mac. I can right click and choose the "Download Linked File" and it will download fine but it's a pain when I am just trying to view an online PDF.
I'm running MacBook Pro 10.6.2 bought in Jan 09. Any help is greatly appreciated. Thank you!I can provide screenshots of the problem. In this example I tried to download flash player from Adobe. http://www.biggfx.com/example1.jpg When I click the "Agree and install now" button I am taken to the dark gray webpage which normally I am not redirected to another page just the automatic download begins. http://www.biggfx.com/example2.jpg As you can see in the address bar this is the .dmg page where the download is suppose to start. Nothing happens. No download to my desktop or my download folder.
Usually I can just right click the link button and save the file to my desktop. In this situation I am unable to because the button also acts as an agreement.
This is the same situation when I click on a .pdf link, instead of seeing the pdf in the window, it's just gray.
I've rebooted, relaunched and tried different browsers. Same problem, although in firefox I get a white page not gray.
Hope this helps.
Thank you! -
When lock My MacBook under Maverick i want to prevent Display sleep. How to to this?
When lock My MacBook under Maverick i want to prevent Display sleep. How to to this?
I agree this is works when MacBook is locking after some time. Once I press keyboard shortcut to lock, Display also is set to sleeping mode, So question is how to prevent this in this case?
Thank you! -
Have two mail accounts and i want to keep them separate but want to EASILY switch back and forth from the main screen instead of going through, Settings, Mail, and selecting account. Major pain the butt. This has been a request from Apple users for many years. it's great you can now combine all emails into one, but some people want them kept separate and have separate icons on the main page. They could easily do this by having one "MAIL" account as white and another red. Or put MAIL 1 and MAIL 2. Or an actual label that the mail accounts are called on the ICONS!!
Help!eshghoolak wrote:
...I could switch back and forth between accounts while in the mailbox, with one button. I think that is what you are referring to? Whoever said it's just a simple switching - you obviously haven't had the pleasure of using an Android device. It's not that quick to go back and forth - definitely not efficient...
Not that it matters a lot, Android vs iPhone interface is largely a matter of personal preference and what you know... I'm not sure which one you're saying is not efficient...
In any event...
I currently have two email accounts setup. My iPhone main page Mailbox settings reads:
Mailboxes
Inboxes
All Inboxes
Gmail
[email protected]
Accounts
Gmail
[email protected]
I wish there an efficient way to move back and forth while in the "Inbox" between accounts. Also, Why does one gmail account show as "Gmail" and another as the actually address?
The names are based on the names you gave the accounts when you set them up.
Settings>Mail, Contacts, Calendars.
Tap the account you want to re-name. Go to the "Description" field and put in what ever you want.
Second, there is no way to quickly choose a bunch of emails to delete. I have to manually go into each one and move it to the Trash folder.
If you tap the edit button in the upper right while in mail, you can select multiple items to move, delete or mark (flag).
I don't want any of the condescending remarks, that I've read here and in other forums. I'm honestly looking for a solution, which I think you are too! One thing I realized is that iPhone users in these forums are really defensive and quick to say "that's how it is, live with it, if you don't like it go away" Um...the only thing that tells me is you are pretty bitter and have kept telling yourself that, to force yourself to like your device. I prefer to express my issues, and find solutions. There is ALWAYS a solution...
I think what you will find is that many people here, myself included, tend to get a bit short with people who start off with attacks or whining about how something has been asked for for years and should be easy, rant about things that have already been beaten to death multiple times in the forums, talk about how much better Android or BB are at something (really... if it's that much better, why did they buy an iPhone to begin with?), etc., or continue to ask questions that could easily be answered with a simple search, or even just by looking back at the last dozen posts to the forum, half of which probably asked the EXACT SAME question.
I don't think any of us go out of our way to be rude or uncivil. That said, attacking the people who are attempting to help you is much more likely to generate a response of 'if you don't like it, go away', than it is to generate something that will be truly helpful.
Maybe you are looking for
-
Copy data Between different servers.
Hello Floks! I´m trying to migrate my essbase server to another machine. All is done, planning is installed and is working. When I copy the database folders (in my case Hyperion\Essbase\App\...) to the new server and i want to start the database, it
-
Linking Oracle Process id with windows process id
hi, i am using oracle database 11g(11.1.0.6.0) in windows 2003 server. i have an oracle session established through an application server. i have found the process id of that session by comparing the v$session and v$process tables. Now i want to comp
-
New Objects always created in $TMP
All my new objects/transfer rules/etc are created in $TMP. How do I tell BW to prompt for a package when activating?
-
Line weight will not reduce below 1pt
I'm creating vector files for a laser cutter, which requires cut lines to be weighted at .001. This normally works fine, but for certain shapes, the weight keeps resetting to 1. This seems to happen at random, whenever I create a shape with a pen of
-
Excel file will not open on new air book after file transfer
i transfered through airdrop and email both an excel file which it auto zips and it won't open on my air book in numbers it keeps replicating the zip. Any ideas