Want to maintain Material Master fields as default

Dear Friends,
Material Pricing Grp
Product Hierarchy
Acc assignment grp
Item cat Grroup (sales)
This fields I would like to make as default with recpective val.
Let me know if u hav solution.

Hi N Thombare
You can maintain these fields as mandatory in your material master...U must be using field reference i.e. say for eg 0001 or whatever which u can see in T Code "<b>OMSA</b>".......Against that field reference; u keep below mentioned fields as mandator i.e. in T Code "<b>OMS9</b>"........But these will help u to keep these fields as mandatory.......which means w/o entering values; u may not save material master
If required; assign these fields to field groups in OMSR
I hope it will solve your problem
Rgds

Similar Messages

Material master Fields Mandatory

Hi Guys,
i want to make some field mandatory, in Sales Org view of material master, Please help me where i have to go in SPRO for such setting
Regards,
Ashish

Hi Ashish,
First go to the respective field for which it has to be made mandatory. Note down the Table name and field name.
Go to SPRO--> Logistics General --> Material Master --> Field Selection --> Assign Fields to Field Selection Groups.
click the position field name button and enter the table name - field name (eg MARA-TRAGR for Transportation Group). Note down the Selection Group. Then go to
SPRO--> Logistics General --> Material Master --> Field Selection --> Maintain Field Selection for Data Screens
Kindly mention the field selection group that has been noted earlier and press enter.
Then in the middle Field Selection (Field Selection Group 1) can be seen select the field reference of the material type or MM01 for Create Material Master or MM02 for Change Material master as hide, display, reqd entry and Opt. entry.
Hope it will be useful, if so mention.
Regards,
Elanchezhian. K.C.

Material master fields on plant level

Hi all,
is it possible that i can restrict fields on plant level, like one material type one field i want mand. in one plant and optional in other plant.
regards,
qsm sap

hi,
Yes, it posible:
go to SPRO
Logistics - General-> Material Master->Field Selection->Define Plant-Specific Field Selection and Plant-Specific Screen Selection (OMSA)
see the settings for the plant in field reference - you need a diferent reference to the diferent plants (group together similar plants - all the ones that you want the field to be mandetory should have the same field reference)
now go to OMS9 or OMSR
and set the field as mandetory for the field reference you have made in OMSA
good luck
shachar

Reg.Material master field active & deactive setting

Dear All
How to set the material master fields as "Optional","Requirement" and "Hide". What is the tcode?
Please advise step by step.
Thanks
Rajj

first copy the screen field of mateiral master to get this press F1 on the the field adn from technical tas copy the the screen field (e.g MRP group MARC-DISGR) then go to OMSR transaction and hit field name and enter the value you have copy from mateiral
once you see that field on the screen then hit the Green yellow arrow from right side of screen whic will take the screen where oyu can make optiona, reqd or hide field.
but make sure here you make setting at appropriate field ref other wise it will impact many transaciton
e.g. if oyu want to make field optional in MM02 then don;t make field optional at ROH

Locking and locking material master fields

Hi Experts
I have a scenario where we need to lock material master field to be locked once data is maintained in the field so that its not editable for the users to change by the users, later the change should be possible for the field through an interface.
Any inputs on how to achieve this.
Thanks
Vickey

Im not sure how to get a direct solution for your scenario, but maybe you can use Authorization group to control who can access to this material instead?
Just a thought.

Mass changes of Material Master field with different values

Hi,
How to change a field in Material Master for more than thousand materials. I think MM17 can only be used for mass changes of materials with same values. I need to upload different values for different materials. Is there any other way to do this.
Thanks,
K R Vishnu Kumar

Hi Kumar.
I think you have to use LSMW for mass updation for Material Master fields with different values.
Regards,
Rahul.

I want to upload material master (MM01) using LSMW with BAPI method

I want to upload material master (MM01) using LSMW with BAPI method and also later on I may need to change the updated data.
Which business object and Method I should use so that i can do both.
Thanks
kumar n

Hi,
The business object is BUS1001.
Thanks,
Murali

Material Master Field Selection Group

Hi Experts
In Material Master
Under MRP2 View - Field # Prod Stor Loc, (MARC - LGPRO) appears & Work Scheduling view, under Field Selection Group: 77
Now I want to also add/extend this field: MARC - LGPRO in Plant Storage 1/2 view. Possible ?
What are the steps involved.
Rgds
RG

Hi,
Go to OMT3B, here select Entry "21" (Std ind.(short) tab pages) and double click on "Data screens" and here select entry "21 + 18" (General Plant Data / Storage 1) and then double click on "Subscreens" and maintain following entry;
21 18 4 SAPLMGD1 2484

Material Master Field Change

Hi Experts
I have a Field in MRP2 View MARC -> Field LGPRO (Issue Storage Location).
I am using MRP2 view, only for this field.
1) Is it possible I can move this Field to Plant/Storage location view ??
2) How to restrict this setting only for particular material types.
Regard

You need to move the entire sub screen. If you go to SPRO->logistics General> material master>configuring material master--> define structure of data screens for each screen sequence. Say select 21 that is std ind ( short) tab pages and make a copy of that say Z1. In that if you go to MRP2 view the sub screen containing storagelocation field is with screen number 2484.
Now if you go to Plant storage data view 1 and select dialog structure subscreens; here the screen with 0001 can be changed to 2484. However since this is related to MRP view the maintainance status needs to be changed to D from L else you will not be able to see the fields. But if you change the status to D the orginal sub screens of Plant data/storage1 will not appear.
You will have to check that these subscreens can be moved to Gen plant data/storage2.
Finally you need to assing this Z1 under same node but assign screen sequences to user/material type/transaction/industry sector under that
SREf Trans Sref user Sref Matl type Sref : industry Ssq
01 * relevant material type * z1 ( the one which was created as above)
However material master being very critical it is advised not to make such changes and if any changes are made it has to be thoroughly tested for the impact.
Regards
Sangeeta

How to set 'Material Master' tab as default in standard transaction CG54?

Hi All
I am having a requirement to call the transaction CG54 from a custom program. On calling the transaction, I need to put some default values to the input fields and the default tab selected should be 'Material Master'. I am able to default input fields using BDC Transaction call. Can anybody guide me how to set Material Master tab as the default tab selected?
Thanks in advance
Rinzy Deena Mathews

Hi All
Solved the issue by myself.
Initialization of tab in transaction CG54 is based on the values in the standard table TCGSGP - EHS: Search parameter (reproduction from SET/GET memory).
Calling of the transaction CG54, with default values and parameters can be done with the help of following standard function module:
*-- Types
TYPES : BEGIN OF t_obj_tab.
          INCLUDE STRUCTURE rcgapplobj.
TYPES : END OF t_obj_tab.
TYPES : tt_obj_tab TYPE t_obj_tab OCCURS 20.
TYPES: BEGIN OF t_zplm02,
           sbgvid TYPE zppr_de_sbgvid,
         END OF t_zplm02.
*-- Internal Tables
DATA: li_obj_tab    TYPE tt_obj_tab WITH HEADER LINE,
        li_report     LIKE rcgstdrecn OCCURS 20 WITH HEADER LINE,
        li_variant    LIKE rcgstdrecn OCCURS 20 WITH HEADER LINE,
        li_subid_tab TYPE espre_subid_rep_tab_type WITH HEADER LINE,
        li_report_m   LIKE rcgstdrecn OCCURS 20 WITH HEADER LINE,
        li_variant_m LIKE rcgstdrecn OCCURS 20 WITH HEADER LINE,
        li_subid_tab_m TYPE espre_subid_rep_tab_type WITH HEADER LINE,
        li_zplm02     TYPE STANDARD TABLE OF t_zplm02.
*-- Structures
DATA: ls_addinf     TYPE rcgaddinf,
        ls_rcgradmsel TYPE rcgradmsel,
        lw_zplm02     TYPE t_zplm02.
*-- Variables
DATA: lv_trtype     TYPE rcgdialctr-trtype VALUE 'D',
        lv_actype     TYPE rcgdialctr-actype VALUE 'D',
        lv_viewappl   TYPE tcgl3-repappl     VALUE 'MATMASTER',
        lv_sel_valdat TYPE rcgradmsel-valdat,
        lv_sel_langu TYPE rcgradmsel-langu,
        lv_ucomm      TYPE syucomm,
        lw_gen        TYPE char10,
        lv_flag       TYPE esp1_boolean,
        lv_werks      TYPE werks_d,
        lv_bsbgvid    TYPE zppr_de_bsbgvid.
*-- Parameters
ls_addinf-aennr      = sy-datum.
ls_addinf-valdat     = sy-datum.
ls_rcgradmsel-sbgvid = iw_gen.
ls_rcgradmsel-matnr = p_matnr.
ls_rcgradmsel-namcat = 'MATNR'.
ls_rcgradmsel-reprefflg = abap_true.
ls_rcgradmsel-numcat = 'NUM'.
*-- Application Object
li_obj_tab-repappl = 'MATMASTER'.
li_obj_tab-objectkey = p_matnr.
APPEND li_obj_tab.
*-- Evaluate selection screen and fill keytab
CALL FUNCTION 'C1G0_KEYTAB_FILL_FROM_RADMSEL'
    EXPORTING
      i_radmsel             = ls_rcgradmsel
      i_valdat              = ls_addinf-valdat
      i_actype              = lv_actype
      i_flg_popup_no_param = abap_true
    IMPORTING
      e_flg_cancel          = lv_flag
    TABLES
      i_applobj_tab         = li_obj_tab
      e_keytab_report       = li_report
      e_keytab_variant      = li_variant
      e_subid_refreport_tab = li_subid_tab
    EXCEPTIONS
      OTHERS                = 1.
*-- Initilize Report Header Buffer
    CALL FUNCTION 'C1AP_ESTDH_BUF_INIT'
      EXPORTING
        i_aennr = ls_addinf-aennr
        i_valdat = ls_addinf-valdat.
*-- Parameters
    ls_addinf-aennr      = sy-datum.
    ls_addinf-valdat     = sy-datum.
    ls_rcgradmsel-sbgvid = iw_gen.
    ls_rcgradmsel-matnr = p_matnr.
    ls_rcgradmsel-namcat = 'MATNR'.
    ls_rcgradmsel-reprefflg = abap_true.
    ls_rcgradmsel-numcat = 'NUM'.
*-- Application Object
    li_obj_tab-repappl = 'MATMASTER'.
    li_obj_tab-objectkey = p_matnr.
    APPEND li_obj_tab.
*-- Initial report block tree of information
    CALL FUNCTION 'C1G2_ENTRY_INQUIERY'
      EXPORTING
        i_trtype              = lv_trtype
        i_actype              = lv_actype
        i_addinf              = ls_addinf
        i_viewappl            = lv_viewappl
        i_sel_valdat          = lv_sel_valdat
        i_sel_langu           = lv_sel_langu
        i_rcgradmsel          = ls_rcgradmsel
      IMPORTING
        e_okcode              = lv_ucomm
      TABLES
        i_keytab_report       = li_report
        i_keytab_variant      = li_variant
        i_subid_refreport_tab = li_subid_tab
        i_applobj_tab         = li_obj_tab.
With Regards
Rinzy Deena Mathews.

Multiple class types for material master classification display default.

Hello,
We are running on R/3 4.7. We use several different class types for our material masters (001 and Z01). The problem this creates is the end user having to constantly tell the system which class type to use when going to the classification screen for different materials with different class types. If a user views one material's classification page with a particular class type (001) then looks at another material with a different class type (Z01) the system tries to pull in information from the last materials class type (001). The system tells the user there are no assignments for the class (001) in the material their viewing but there is one for class type (Z01). The user then has to select the class type that applies to the material master their trying to view. Is there a way for the system to automatically see when a material has only one class type assigned to it for it to automatically default it in without the user having to specify the class type?
Thanks,
JRW

Hi,
Check the configuration, have you maintained default class type for material type.
Logistic General> Material Master> Basic Setting> Material Type> Define attributes of Material Types>Select the material type> Double click on material type--> Class type
Edited by: P. Dhamane on Jun 4, 2010 3:21 PM

Material Master Field Restriction

Hi Team!
is it possible to restrict the setup of some specific field for an specific view in Material master, and let the rest of the field to be updated for the normal users that used to?
the views that I'm talking about are the MRP1 & MRP2 at the material master, the idea is that no one can modify certain fields that belongs to them,
could it be possible, pls let me know.
regarDs!!

Hi
You cannot restrict the material master feilds based on the user, because the feilds in the material master are not user specific.
It is based on the material type and also you can modify based on plant specific and industry specific.
May be you wont give certain users for authorization for MM02 transaction ,for that you cantact the SAP security guys in your
team,
If you want no one can change the MRP veiws you can do in the configuration settings,T,code OMSR the table name is MARC and based on the feild name you select the Display only, so no one can change the values.
Thanks

Material Master Field Selection

Hi,
I want to know whether the field from costing view of material master MBEW-HRKFT is made mandatory for a material type or not?
how can I check the same?
Thanks in advance

Hi,
1. First go to OMS2 > Here for material type, get the "Field reference Key"
2. Then go to OMS9 > Here in search help of Field sel. group, search for "MBEW-HRKFT" and select it. (It will come as 41)
3. Now click on "Position" buttom and enter the Field reference Key got in Step1 and selct it by pressing enter button. Now select "Reqd Entry" Radio button
But, it will activate all the relevant fields in Costing view, not only this field.
So go to OMSR, here search Field Name "MBEW-HRKFT" and assign a new selection group (For e.g. 239)
And now In OMS9 - Do necessary field selection for this Field sel. group 239 as suggested in above steps (1/2/3)

How to maintain material master data in plant....

Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
Balu

Hi,
Please check the below link for MMR creaion .
http://web.mit.edu/sapr3/windocs/bpmdb01m.htm
Regards,

Material Master - Field in MM to enter NDC (National Drug Code) or similar

Hallo Experts,
Is there somewhere in the material master where one can enter codes for identification such as NDC - National Drug Code?
The reason I asked this is because it is a custom requirement for some goods that are considered drugs which we trade with other companies across the border (Mostly US). This information (Coming from a field in the MM) needs to be EDI'd and hence I am in search of a field in the MM that could house this code. Its Kind of like the Harzadous material number but in our case WM is not implement. Is there a possibility?
Will appreciate your response,
Thanks,
LN.

Hallo Experts,
Is there somewhere in the material master where one can enter codes for identification such as NDC - National Drug Code?
The reason I asked this is because it is a custom requirement for some goods that are considered drugs which we trade with other companies across the border (Mostly US). This information (Coming from a field in the MM) needs to be EDI'd and hence I am in search of a field in the MM that could house this code. Its Kind of like the Harzadous material number but in our case WM is not implemented. Is there a possibility?
Will appreciate your response,
Thanks,
LN.

Want to maintain Material Master fields as default

Similar Messages

Maybe you are looking for