Want to make 3d sphere, 3d revolve isn't doing what I want

So I've got illustrator CC and I'm trying to map a pattern of a golf ball on to a sphere but it isn't doing what I'd like - it's distorting my circles the wrong way. I found a blog post about using a custom plugin, but the plugin looks like it's outdated. Wondering if there is a way to get the desired effect in CC that I'm missing? Here's the post I'm talking about, and I want to make a golf ball similar to the one in the picture. Thanks for any suggestions!
http://vectorboom.com/load/tutorials/effects/how_to_allocate_flat_objects_on_a_sphere_surf ace_in_adobe_illustrator/3-1-0-431

Nope.
Per the terms of service you agreed to-all sales are final.

Similar Messages

The iMQ 2.0 restart command isn't doing what I want.

I have installed the imq 2.0 on solaris 8 on a single host. jmq broker
is installed by following the admin guide. When I tried to use jmqcmd
shutdown bkr. It is shutdown without any problem. Then I use
jmqcmd restart bkr to restart the jmqcmd It comes up with the
following error:
Error while connecting to the broker.
[C4003]: Error occurred on connection creation. - caught
javax.jms.JMSException
Please verify that there is a broker running on the specified host and
port or use the '-b' option to specify the correct broker host and port.
Restarting the broker failed.
Eventhough I tried on different port no on the same localhost by
typing "jmqcmd restart bkr -b localhost:1111", it is still the same
problem.
When I tried to run jmqadmin, and connect to the specified broker, it
prompts with an error box as below:
Error encountered while connecting to the broker: "MyBroker":
Broker Host: 'localhost'
Primary Port: '7676'
[C4003]: Error occurred on connection creation, - caught
javax.jms.JMSException
Please verify that there is a broker running on the specified host and
port.
It seems that the port 7676 is still engaged by the broker for some
reasons. ie. the shutdown does not free up the port.
Would somebody have any idea on what went wrong?

The 'restart' option in both jmqcmd and jmqadmin is to
first shutdown and then restart a running broker.
It is not for starting a broker that has already been shutdown.
See p.130 of the admin guide.

HT1911 i can't remember my security questions but i do not want to make a new email address to reset them what do i do.

i can't remember my security questions but i do not want to make a new email address to reset them what do i do.

Welcome to the Apple Community.
Start here (change country if necessary) and navigate to 'Password and Security', reset your security questions using the link provided, you will receive an email to your rescue address, use the link in the email and reset your security questions.
If that doesn't help, you don't receive a reset email or you don't have a rescue address, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

How to save slideshow settings so when I press Ctrl-Enter it does what I want?

How to save slideshow settings so when I press Ctrl-Enter it does what I want?
eh?
R

I tested what you gave me there Rob. On my Mac I have dual monitors:
-Only blackens/show slideshow on one monitor (the main monitor, if I move LR to my secondary monitory, the slideshow is still on the first, but the second still runs normal, with LR just sitting there).
-If I disable slide durration I have to manually advance the slides with the right arrow.
-I don't have "Lightroom" (or with my current settings any) text on the screen.
-Does not repeat.
My Windows machine doesn't have dual monitors, but the others work correctly....
That is, until I thought about this differently. Since we are looking at changing Slideshow settings, I was naturally in the Slideshow module. But then I remembered the whole point of the Impromtu Slideshow was that you can view slideshow playback from any module. Once I returned to Library and clicked Command/Ctrl+Enter, then I saw exactly what you are talking about. Both monitors are blackened, slide duration is ignored, etc.
You know why? Because the Impromptu Slideshow uses one of the templates when outside of the Slideshow Module. Which one? Well, Default +, of course. How do you change that? Right-click (Command-click) the slideshow template you'd rather use and select "Use for Impromptu Slideshow".

Hello I have downloaded new version of flash player and it says that adobe wants to make changes when I insert password it does not like it?

when installing new version of adobe flash it says that adobe wants to make changes it has my name already inserted and when put password it docent accept it

thank you but where do I get systems administrator and password from?

Source Formatting isn't doing what I expect

I either don't understand how it works, or it isn't working
as it should.
When I apply Source Formatting to badly formatted code, I was
expecting it
to format the td tags like this:
text
<td>
tag contents
</td>
text
In the tag library editor it says:
Line Breaks: Before, Inside, After
Contents: Formatted and Indented
Case: Lower Case
After applying source formatting all my td tags get formatted
like this:
text
<td> tag contents</td>
text
Or if there are many lines of code between the td's they get
formatted like
this:
text
<td> tag contents 1
tag contents2
tag contents3 </td>
text
What am I doing wrong?
Thanks,
Kirk

Randy,
OK, I see that setting. I wondered why it wouldn't behave. I
guess it was
doing what it is supposed to do.
I guess I have seen odd behavior sometimes in IE rendering
complex table
based layouts and have had to go in and remove that space
because it
rendered the space in the source code the same way it would
have rendered a
<br>.
I guess it is better to leave the setting to "No Break" but
dang, that sure
makes the source code look ugly. I like structured nested
code, it makes it
so much easier to troubleshoot.
Now I don't know what to do.
A friend of mine used to code crazily commented, extremely
structured html
code. (former VAX programmer) He had a program that would
strip out every
extra space, and all the comments before he uploaded it. He
kept two
versions, almost like a programmer keeps source code and
delivered code.
That would be a solution around my problem, but I am too lazy
to maintain
source and delivered code.
Thanks,
Kirk
"Randy Edmunds" <[email protected]> wrote in
message
news:elhsfc$5r0$[email protected]..
> Hi Kirk,
>
> Go to:
>
> Edit > Preferences > Code Format
>
> and you'll see a setting called "No break after TD"
which is on by
> default. Before you turn this off, please read on.
>
> The reason for that setting is because there is a
browser rendering bug
> where some browsers (e.g. IE) will render the break in
the source code as
> a break in the page. This change was not simply done in
the Tag Libraries
> settings to give due warning about this bug.
>
> Hope this helps,
> Randy
>

MouseEvent not doing what I want

Below is a working program. What I want is when I click on the program it's suppose to go to the other method (i.e. like a story book going to the next page) but sometimes I have to double click for it go to and sometimes it doesn't work at all. Can someone help me fix this so that is goes to the next method called. I thought I could fix this by having a getClickCount()but it doesn't work one-by-one; sometimes, i have to click 2 or 3 times to have to go to the next one. And yes, I am new to the whole program deal. So if some of you big worms can help, I would greatly appreciate it.
Roman03
* The basic framework for a wanna be story book
* @author Michael
* @version 0.00001
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
public class Zelda extends JFrame implements MouseListener
     private static final int GAME_STATE_INTRO = 0;
private static final int GAME_STATE_SETUP = 1;
private static final int GAME_STATE_PARTONE = 2;
private static final int GAME_STATE_PARTTWO = 3;
private int clicks;
private int gameState;
// private int gameCity;
String name = "heroShot.gif";
Image image = Toolkit.getDefaultToolkit().getImage(name);
String sname = "snowMan.gif";
Image simage = Toolkit.getDefaultToolkit().getImage(sname);
* Entry point for code execution.
public static void main(String[] args) {
new Zelda();
* Constructor for objects of class BattleshipApp
public Zelda()
this.setSize(600, 500);
this.show();
this.setTitle("Roman Empire Software");
this.addMouseListener(this);
this.gameState = GAME_STATE_INTRO;
* Draws the game window.
public void paint(Graphics gfx) {
if (this.gameState == GAME_STATE_INTRO) {
this.drawTitleScreen();
else if (this.gameState == GAME_STATE_SETUP) {
this.drawGrid();
if (clicks == 2) {
this.drawPartOne();
if (clicks == 3) {
this.drawPartTwo();
* Draws the 'Welcome to Battleship' screen.
private void drawTitleScreen() {
// Get an object representing the area within the window borders.
Container clientArea = this.getContentPane();
// Get the Graphics object associated with the client area.
Graphics gfx = clientArea.getGraphics();
// Get the size of the client area.
int width = clientArea.getWidth();
int height = clientArea.getHeight();
gfx.setColor(Color.black);
gfx.fillRect(0, 0, width, height);
gfx.setColor(Color.green);
gfx.drawString("Welcome to the New Roman Empire", 200, 325);
gfx.setColor(Color.gray);
gfx.drawString("(click mouse to continue)", 228, 275);
gfx.drawString("(This is the first screen)", 225, 300);
gfx.drawImage( image, 180, 0, this );
gfx.drawString("Clicks " + clicks, 400, 400);
private void drawGrid() {
// Get the info for the work area.
Container workArea = this.getContentPane();
Graphics workAreaGfx = workArea.getGraphics();
// Fill the work area with black.
workAreaGfx.setColor(Color.black);
int width = workArea.getWidth();
int height = workArea.getHeight();
workAreaGfx.fillRect(0, 0, width, height);
          workAreaGfx.setColor(Color.green);
workAreaGfx.drawString("(click mouse to continue)", 250, 375);
workAreaGfx.drawImage( image, 0, 0, this );
this.gameState = GAME_STATE_PARTONE;
workAreaGfx.drawString("Clicks " + clicks, 400, 400);
workAreaGfx.drawString("This is still a working program ", 250, 200);
workAreaGfx.drawString("I am still working out the bugs ", 250, 220);
workAreaGfx.drawString("(This is the Second screen)", 250, 240);
// Code to draw the grid lines.
// First, set the line color.
private void drawPartOne() {
// Get the info for the work area.
// Get an object representing the area within the window borders.
Container clientArea = this.getContentPane();
// Get the Graphics object associated with the client area.
Graphics gfx = clientArea.getGraphics();
// Get the size of the client area.
int width = clientArea.getWidth();
int height = clientArea.getHeight();
gfx.setColor(Color.black);
gfx.fillRect(0, 0, width, height);
gfx.setColor(Color.green);
gfx.drawString("Why ain't this thing working?", 200, 325);
gfx.setColor(Color.blue);
gfx.drawString("Some times it's the snow hero that does it", 200, 425);
gfx.setColor(Color.gray);
gfx.drawString("(click mouse to continue)", 128, 575);
gfx.drawString("(This is the third screen)", 225, 300);
gfx.drawImage( simage, 18, 11, this );
gfx.drawString("Clicks " + clicks, 400, 400);
private void drawPartTwo() {
// Get the info for the work area.
// Get an object representing the area within the window borders.
Container clientArea = this.getContentPane();
// Get the Graphics object associated with the client area.
Graphics gfx = clientArea.getGraphics();
// Get the size of the client area.
int width = clientArea.getWidth();
int height = clientArea.getHeight();
gfx.setColor(Color.black);
gfx.fillRect(0, 0, width, height);
gfx.setColor(Color.green);
gfx.drawString("Junk text who cares", 250, 125);
gfx.setColor(Color.green);
gfx.drawString("Blah Blah just have to put some text", 100, 225);
gfx.setColor(Color.blue);
gfx.drawString("Some times it's the snow hero that does it", 300, 225);
gfx.setColor(Color.gray);
gfx.drawString("(click mouse to continue)", 28, 575);
gfx.drawString("(This is the forth screen)", 225, 300);
//gfx.drawImage( simage, 118, 11, this );
gfx.drawString("Clicks " + clicks, 400, 400);
* MouseListener methods.
public void mouseClicked(MouseEvent event) {}
public void mouseEntered(MouseEvent event) {}
public void mouseExited(MouseEvent event) {}
public void mousePressed(MouseEvent event) {}
public void mouseReleased(MouseEvent event) {
clicks = event.getClickCount();
Graphics gfx = this.getGraphics();
     this.gameState = GAME_STATE_SETUP;
          this.repaint();
          if (event.getClickCount() == 2 )
this.gameState = GAME_STATE_PARTONE;
          this.repaint();
     else if (event.getClickCount() == 3 ) {
this.gameState = GAME_STATE_PARTTWO;
          this.repaint();

Well, first off, you should use mousepressed instead of mousereleased because it will fire right when you click the mouse button... it's prefered by most people I know.
Secondly, it only doesn't work because of the way you have it trying to refresh.
Take a look at this code:
   import java.awt.*;
   import javax.swing.*;
   import java.awt.event.*;
   public class Zelda extends JFrame implements MouseListener
      private static final int GAME_STATE_INTRO = 0;
      private static final int GAME_STATE_SETUP = 1;
      private static final int GAME_STATE_PARTONE = 2;
      private static final int GAME_STATE_PARTTWO = 3;
      private int clicks;
      private int gameState;
      String name = "heroShot.gif";
      Image image = Toolkit.getDefaultToolkit().getImage(name);
      String sname = "snowMan.gif";
      Image simage = Toolkit.getDefaultToolkit().getImage(sname);
      public static void main(String[] args) {
         new Zelda();
      public Zelda()
         this.setSize(600, 500);
         this.show();
         this.setTitle("Roman Empire Software");
         this.addMouseListener(this);
         this.gameState = 0;//GAME_STATE_INTRO;
      public void paint(Graphics gfx) {
         if (gameState == GAME_STATE_INTRO) {
            drawTitleScreen();
         else if (gameState == GAME_STATE_SETUP) {
            drawGrid();
         if (gameState == GAME_STATE_PARTONE) {
            drawPartOne();
         if (gameState == GAME_STATE_PARTTWO) {
            drawPartTwo();
      private void drawTitleScreen() {
         Container clientArea = this.getContentPane();
         Graphics gfx = clientArea.getGraphics();
         int width = clientArea.getWidth();
         int height = clientArea.getHeight();
         gfx.setColor(Color.black);
         gfx.fillRect(0, 0, width, height);
         gfx.setColor(Color.green);
         gfx.drawString("Welcome to the New Roman Empire", 200, 325);
         gfx.setColor(Color.gray);
         gfx.drawString("(click mouse to continue)", 228, 275);
         gfx.drawString("(This is the first screen)", 225, 300);
         gfx.drawImage( image, 180, 0, this );
         gfx.drawString("Clicks " + clicks, 400, 400);
      private void drawGrid() {
         Container workArea = this.getContentPane();
         Graphics workAreaGfx = workArea.getGraphics();
         workAreaGfx.setColor(Color.black);
         int width = workArea.getWidth();
         int height = workArea.getHeight();
         workAreaGfx.fillRect(0, 0, width, height);
         workAreaGfx.setColor(Color.green);
         workAreaGfx.drawString("(click mouse to continue)", 250, 375);
         workAreaGfx.drawImage( image, 0, 0, this );
         this.gameState = GAME_STATE_PARTONE;
         workAreaGfx.drawString("Clicks " + clicks, 400, 400);
         workAreaGfx.drawString("This is still a working program ", 250, 200);
         workAreaGfx.drawString("I am still working out the bugs ", 250, 220);
         workAreaGfx.drawString("(This is the Second screen)", 250, 240);
      private void drawPartOne() {
         Container clientArea = this.getContentPane();
         Graphics gfx = clientArea.getGraphics();
         int width = clientArea.getWidth();
         int height = clientArea.getHeight();
         gfx.setColor(Color.black);
         gfx.fillRect(0, 0, width, height);
         gfx.setColor(Color.green);
         gfx.drawString("Why ain't this thing working?", 200, 325);
         gfx.setColor(Color.blue);
         gfx.drawString("Some times it's the snow hero that does it", 200, 425);
         gfx.setColor(Color.gray);
         gfx.drawString("(click mouse to continue)", 128, 575);
         gfx.drawString("(This is the third screen)", 225, 300);
         gfx.drawImage( simage, 18, 11, this );
         gfx.drawString("Clicks " + clicks, 400, 400);
      private void drawPartTwo() {
         Container clientArea = this.getContentPane();
         Graphics gfx = clientArea.getGraphics();
         int width = clientArea.getWidth();
         int height = clientArea.getHeight();
         gfx.setColor(Color.black);
         gfx.fillRect(0, 0, width, height);
         gfx.setColor(Color.green);
         gfx.drawString("Junk text who cares", 250, 125);
         gfx.setColor(Color.green);
         gfx.drawString("Blah Blah just have to put some text", 100, 225);
         gfx.setColor(Color.blue);
         gfx.drawString("Some times it's the snow hero that does it", 300, 225);
         gfx.setColor(Color.gray);
         gfx.drawString("(click mouse to continue)", 28, 575);
         gfx.drawString("(This is the forth screen)", 225, 300);
         gfx.drawString("Clicks " + clicks, 400, 400);
      public void mouseClicked(MouseEvent event) {
         gameState++;
         if(gameState > 3)
            gameState = 0;
         repaint();
      public void mouseEntered(MouseEvent event) {
      public void mouseExited(MouseEvent event) {
      public void mousePressed(MouseEvent event) {
      public void mouseReleased(MouseEvent event) {
   }

Compressor beautifully does what I want . . . SOMETIMES!

Hi,
I want to compress something (for YouTube) we shot with a Canon XF300 camera which exports as a Self Contained movie from FCPro at a data rate of about 70mbs. YouTube can take a file up to 2 gig - so for best quality, I'd like Compressor to compress the video at about 30mbs - that'll keep it just under 2 gig, so this is the best quality way for YouTube.
But when I'm done, the data rate is way down at around 18mbs. Of course, it still looks great on the MacBook Pro screen - it looks perfect - but I'd like to use the higher data rate of 30mbs because I think (in theory) because YouTube compresses it again, I'm best off starting out with the highest data rate I can - for minimal loss. When I tell compress, for other projects, to use 3 mbs, or 10mbs, or 1mbs - it listens very well. But it won't do 25 or 30, sometimes?
I'm using h.254 and I'm telling the Data rate to "Restrict to 30,000 kbs" - but it actually gives me about 20,000kbs
How do I get it to "listen" to me! (I have the latest version of everything.)
Thanks,
Larry

Ian, I completely agree with you. And we work frequently with running horses, close ups of them with the background flying by in fast pans . . . .and even in worst case scenerios - even with overcranking - you really can't see the difference much over 20 mbs.
BUT . . . I know with more compression comes more loss. And when YouTube re-compresses it again - that's where the visible loss creeps in. So I figure, give YouTube what they want - up to 2 gig per movie. If YouTube gets it at 30mbs, it will look much better (and will lose less when they compress it again) -- then if YouTube gets it at 16mbs.
THAT'S why I want Compressor to do it at 30mbs - so YouTube will "wreck" it less as it has more data in it to start. It's NOT for our first generation compression . . . it's for YouTube's 2nd generation compression - it'll look better giving them a higher data movie.
So why not give them what they want?
So how do I get Compressor to simple DO what it's told? Is there another way to approach this? I thought when you tell COmpressor a data rate, that's what it does. And it does - but not all the time. So the issue is, not "it looks OK at 18mbs." The issue is I have other reasons why I need 30mbs, how do I simple tell Compressor to do that, and have it do it?
Oh, interestingly, if I take (sometimes) a 20 second piece of a 5 minute movie, compressor WILL compress that at 30mbs! But then when I do the whole thing - it fails to keep the data rate at 25 or 30mbs. THAT'S what's puzzling me!

Ipad 2 doing what it wants. Help?

Why is my iPad 2 doing what ever it wants. By clicking into apps itself etc. Have to switch it off every time, even that is a challenge as it sometimes won't let me. have to reset it. Had to reset 6 times in about an hour. Anyone know how to fix it? Please anything would help.

Hello:
If the iPad is in warranty, I would either take it to an Apple store or call Applecare. The device may be faulty.
Barry

I want to make my G4-450 Dual faster.. what can i do???

G4 DP Firewire
768mb ram right now
30G internal HD
70G Lacie external
Running current Tiger
i use it for web, design and audio production.. running all the current apps like Photoshop, illustrator, flash, dreamweaver, reason, reycle, deck & peak..
things are working pretty good.. but i occationally get the spinning ball doing certin things in thr apps.. its funny, it happens with itunes VERY OFTEN, like when i chose a new song it can happen.. happens when clicking a new playlist sometimes.. and often when changing album info (sometimes when just clicking text to edit in itunes)
overall im pleased with the performance with my 6 year old G4.. but i dont have the cash to upgrade to a g5 just yet, and when i do it will be another $2400 tower like i did when mine came out..
so what is my bet options to upgrade my G4??
..is it true that i can get my ram up to 2G??? ..and would that improve things? ..should i think about getting a new processor upgrade?? ..are there any tips to get things faster without an upgrade??
thanks for any help guys!!!
Patrick
450Dual Firewire Mac OS X (10.4.4) 768 MB RAM

Hello Patrick.
I own the same model of G4 as you and would like to make a few suggestions from my past experience. Karl Texler did a splendid job explaining things already, I just had a couple of things to add.
1st- Add RAM, but only 1.5GB. I had some wierd problems with my tower that ended up being having too much RAM (2GB) installed. Reducing it down to 1.5GB eliminated ALL these problems.(And in case anyone reading this was wondering, it wasn't a bad stick of RAM, just too much installed.)
2nd- Upgrade the HD. 7200RPM and 8MB Cache minimum. 120GB is the max internally on the ATA66 bus, unless you invest in a PCI controller card. In that case you could go PATA or SATA and as large a HD as you want. SATA is noticeably faster than PATA and probably the better investment. You will also be able to use the SATA in a newer computer down the road. BTW, you can clone your current internal drive onto the new drive quite easily.
3rd- Upgrade your video card. If you want Core Image support in Tiger, you will need an ATI 9600/9800. These cards will also benefit you if your a gamer. I would lean towards the 9600. Its cheaper, does not require an additional power source, and it runs cooler. If none of the above applies, an ATI 8500/9000 would be a good choice.
4th- Upgrade your CPU. As Karl said above, the G4 upgrades w/2MB L3 Cache are considered best for 100MHz bus Macs. My OWC has been flawless, although I did put a quieter fan on it. The original was annoyingly high pitched, now I can't even hear it.
I hope this helps you in your upgrading process. Please don't hesitate to ask for more info. I really enjoy the process of upgrading a computer. Dare I say Macs AND PC's. Yes, I own and enjoy both for their respective qualities.
Happy Mac'ing.
G4 MDD 1.25GHz DP FW800-ATI 9800 128MB-2GB RAM Mac OS X (10.3.9) G4 Gigabit 1.5GHz OWC-ATI 9000 OEM 64MB-1.5GB RAM

Booting an LC 475? Want to make it stop loading the program it does...

Hi all, and thanks for having me, I've got a couple of old lc475 machines that are currently installed in arcade games in the form of fibreglass wizard fortune tellers! ( http://www.merlinthewizard.com/ ) but i want be able to use it as a normal computer aswell, (being used at home, want to entertain and teach my kids) it autoloads merlin everytime, and i have no way out of this, it takes a different code for each month aswell, which comes at a cost to me atm. as i don't have any great experience with mac's, i'm hoping to find out how to stop this loading merlin automatically initially, Thanks in advance for any advice and help..
I have two of these machines, and will only end up using one as fortune teller/pc, the other one is destined to be gutted, and modified to take a larger touchscreen for a jukebox hosting pc. meaning i'll have a spare computer, touch monitor etc if anyone wants one!

Thanks for the help, I've just found that i don't have a mouse or keyboard to suit, but i'll locate one in next day or two.. hopefully! It gives me 3 chances to get the password, to access merlin, then auto shuts itself down. I just can't justify continuiing to buy the monthly access password for $35 p/m, when the only use it has is by my kids every 2nd weekend! I'm not trying to make money from it, (although it does need a coin to pass through mech. to activate merlin once past password, i'm sure this would be simple to detour once software sorted) and just out of curiosity, as it asks for a code for a given date, and i have an older code, would reverting the date on pc fool the program into thinking it was january again?

I have a full sketch in Illustrator that I want to make symmetrical, how do I go about doing this?

Hey guys, I'm somewhat new to Illustrator and I have a scanned in sketch of a man's face that I would like to make perfectly symmetrical. How do I go about doing this? Thanks in advance!

Justin,
You may redraw either half with the Pen Tool (or another tool) and reflect a copy.
And you may go a step further:
It is quite possible to create a symmetrical drawing live with the help of Illy, with the inbuilt tools, without any external plugins, if you just start in the right way. Obviously, it is much better to see the whole appearance while you create it.
You may see the reflection live after each Anchor Point if you start out as follows (for Pen Tool with vertical reflection to the right, similar for other directions):
1) Create the first two Anchor Points of your basic path;
2) Effect>Distort&Transform>Transform>ReflectX with 1 copy and the middle right side Reference Point chosen;
3) With the Pen Tool ClickDrag (or Click) anew from the second Anchor Point and go on;
If you wish, you may:
4) Object>Expand Appearance and Ctrl/Cmd+J to join the half paths.
Ctrl/Cmd+Z Undo is your friend: you can just go back and redo while drawing the basic path.

I just get my iphone 4 and had bought a song from Apple on the itune and want to make thats music to ringtone for my iphone, what to do ?

How to make the song i just bought from apple itunes store to ringtones

See Create free ringtones with iTunes 10 video - CNET TV

Wanting to make another i-tunes for another computer .. what will happen?

Hey ... I have my main i-tunes on home desktop , but i find when i am out sometimes i want to add another song to my ipod from my laptop ... so i want to instal another copy of i-tunes on my laptop to add songs, but i dont want it to easre the songs on my ipod already plus i dont want all my songs from my ipod on my laptop ... is there a way to do this and if so how ... and what problems might this cause for my ipod / main itunes on my home computer???
Thanks Blandkid
Dell Windows XP

If you want seperate accounts for managing apps and purchasing content, basically yes, you need two account and would need to repurchase. However, if you just want seperate ID for iMessgae, icloud and such, you can do that and still continue sharing the same Id for apps and itunes.

How do I tell if some kind of malware has been installed on my computer? My daughter answered the phone and they had her go to a site for ammyy admin. I don't think she was successful at doing what they wanted but how do I make sure?

I don't know how to tell if the phone scam that was pulled on my daughter was successful or not? They had her go to a site for Ammyy Admin. My husband who was home at the time and not at all computer literate thinks that it wasn't successful but how do I tell for sure?
Thanks!!

It's not very likely that any harm came of this. It sounds as though they were trying to get your daughter to enter some personal information into the website. If she did not do this then don't lose any sleep over it.
If she did, just change whatever passwords that might have been associated with the personal information she provided.
If your computer starts exhibiting some heretofore strange behaviour, pay attention to it so that you might describe what it is. As I say this is unlikely to happen.

Want to make 3d sphere, 3d revolve isn't doing what I want

Similar Messages

Maybe you are looking for