Want to modify FC 5.5 video skin. (need controller bar to disappear)
There seems to be a limited degree of control over the video controller skins in Flash catalyst. I want the nice appearance of 'no controller' plus the capability of of play, stop . fullscreen. ie. Have the bar appear on mouseover. I'm not a great coder, but can usually muddle my way through once I have some direction.
Thanks!
Hi Trisha,
The only modern Mac's with video cards are the Mac Pro and Xserve (server) systems. They both are priced quite a bit higher than any Mac Mini.
Some systems, like the Mac Book Pro laptop can be ordered with different graphics cards, but that has be done when the system is built, as it is not replaceable once the system is built. To find out which systems, go to store.apple.com. For each system that you select, you can see if there's an option for a better video card.
David
Similar Messages
-
CS4- Adding a modified audio track to video - help needed ASAP
Hi!
I have an exhibition coming up in a couple of days and I interviewed some people for that, but they all wanted their voices changed.
Now, I imported the avi. file and put it on the timeline. (30 fps [640x480 (1,0)], 11024 Hz - 8-bit Twos-com)
I extracted an audio file in wav, then changed the pitch in audacity and then imported the new audio clip to CS4. But I cannot group or export them in any way. What is going on? What am I doing wrong? I need the video work with modified voices but I can't get it to work. I am losing my mind and running out of time. I would really appreciate any help!
PS: I am a total Premiere noob. So please be patient with me.But I cannot group or export them in any way.
Not sure that I am following you here. Do you mean that Audacity is not allowing you to Save_As?
Now, if you wish to have all of your Audio Tracks into one WAV file, just do an Export, choosing Export Audio only, by unchecking Export Video. Check that Multiplexing is set to None, where it should default with Audio-only.
Open that file in Audacity, edit as needed, then Save_As, and Import that edited Audio file. Drag it to the Timeline in a clear, Targeted Audio Track of the proper channel-count, and then you can Mute the existing Audio Track(s) in the Audio Mixer, or just turn each Track OFF in the Track Header.
If you mean something else, help me understand what you need to do.
Good luck,
Hunt -
I want to watch an iTunes rental video on my MacBook Pro but AirPlay the audio to my AirPort Express linked speakers. However the AirPlay icon isn't available when arching the rental video in iTunes. Is there another way? Do I need to but an AppleTV? I don't own a TV, hence why I want to watch on my MacBook Pro.
Welcome to the Apple Community.
With or without an Apple TV you can't send video to one device and audio to another using AirPlay. -
Can I transfer data from my G4 to my IMac over a firewire without them syncing or messing either one up - do not want to modify either one...!
Boot the G4 Mac into Target mode...
http://support.apple.com/kb/HT1661
That should make the G4 look like a big FW drive to the iMac. -
Dear all,
I want to automatically extract my iphone-videos from the iPhoto library since I have way over 25 000 objects in there. Afterwards I would like to import them into iMovie. Anyone having an idea? Or is there no possibility to do so?
Thanks in advace
AndreasFile -> New Smart Abum
Photo -> Is -> Movie
and export those:
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue. -
Video Skin not working in embedded SWF
Are there issues with using a video skin on an swf that sits on a web page? Specifically, I have an swf that has a FLVPlayback component. The skin and its path are specified in the Parameters tab; autohide set to true.
When the FLV in the swf plays, the skin appears on a mouse_over, as it should be. However, if the swf has the same dimensions as the flv, and the mouse rolls away, then it appears to me that the swf never "gets the message" that the mouse is no longer over it... and therefore the skin does not hide. Is this normal?
If so, what's the work around? Designing the swf to be larger than the flv? I'd rather not, as that makes for some un-elegant (is that a word?) designing.
Thanks,
DavidFixed it.
var vSound1 = new Sound(this);
var vSound2 = new Sound(this);
var vSound3 = new Sound(this);
playSound1 = function () {
this.vSound1.start();
on (press) {
this.playSound1();
} -
Really really really really want to modify objects in an iterator call
Hey,
I know you are not really allowed to do this, but I am iterating over some objects and I want to modify them while iterating over them without getting a ConcurrentModificationException.
Collection collection = myHashMap.values();
for (Iterator iter = collection .iterator(); iter.hasNext())
MyObject obj = (MyObject) iter.next();
modifySomethingWithinMyObject(obj);
not only does modifySomethingWithinMyObject(obj) modify the object being passed in but it also may modify other values within the hashmap.
This is really killing me. anyone know how to get around this?I know you are not really allowed to do this, but I am
iterating over some objects and I want to modify them
while iterating over them without getting a
ConcurrentModificationException.If you're using HashMap in a concurrent situation you should synchronize it. That takes care of the ConcurrentModificationException.
You're not allowed to modify the HashMap structure while iterating through it (other than by using the metods available in the Iterator itself). If you do you may get something like a BadStructureException or so.
You can modify the objects stored in the HashMap as long as you don't modify anything used by the equals or hashCode methods (if you've overridden them), but in a concurrent situation you should synchronize all object methods that modifies the objects content. -
I want to transfer my VHS-C videos to DVD.
I want to transfer my VHS-C videos to DVD using my I MAC (Mid-2011). I have the camcorder (Panasonic PV-IQ305) to use. I also have a VHS player I can use.
Does the Panasonic camcorder have the play thru capability? If it does you can connect the camcorder to your Mac with a FW cable, put in a tape, launch iMovie and play the tape in the camcorder to import it into iMovie. If the camera does not have play thru see if you can find one that does. Then connect your VHS player to the camera and the camera to your iMac.
Otherwise you'll need to use a converter like the Canopus converters. They are not inexpensive but do an excellent job. I used the ADVC-100 model to convert all of my VHS videos to digital and then burn to iDVD. There are undoubtly other converters on the market that do the same function. The Canopus is the only one I've seen discussed in this community.
If you could borrow a camcorder with pass thru you could save a few $$$.
OT -
One structure is created and using in 3 queries, i want to modify that stru
hi gurus,
one structure is created and using in 3 queries, i want to modify that structure in only one query but it will not effect other two.wat should i do for that?
thanx in advace,
i will assign points,
srinivas.Hi srinivas,
This scenario could be frequently seen in a project. I assume the structure you mentioned is saved as a global structure, then in the query which you want to modify, right click on the structure and choose "Remove Reference". This function copies the global structure to a local one, in which you can change it and the other two won't get affected.
Hope this helps.
Regards,
Aaron -
I want to display computer contents (email videos, YouTube videos) on my Panasonic HDTV. Can a model from Jan. 2010 do this? Thanks.
Yes, easily — but to get the audio to the TV through the same HDMI cable as the video, you'll need an adapter like the ones I linked in this thread:
https://discussions.apple.com/message/15205259#15205259 -
I want to modify the "find" box to be avble to only search for whole words.
I want to modify the "find" box to look only for matching "whole words," otherwise--it's pretty pointless!!!
Also, it is early in the day for this forum as far as activity by the contributor's who really know CSS coding. I bet someone else will have the codes you need later today.
-
I want to modify the payment term in BP
Hi,
I want to modify the payment term in BP. I have this message when I try to modify:
"do you want the system to replace all associated payment term settings automatically?"
I can choose YES or NO: what changes if I choose the first or the second choice?
Thank you in advanceHi ,
No will change for only one Business Partner -that the one you are using
For yes , it will change other all business partner with using default list .payment term
Once you change , you can verify the payment term using this
SELECT T0.[CardCode], T0.[CardName], T1.[PymntGroup] FROM OCRD T0 INNER JOIN OCTG T1 ON T0.GroupNum = T1.GroupNum
*Note -Always test in test environment
Thank you
Bishal -
Want to modify GR/GI SLIP Field into change mode.new to badi
Hi,
I want to modify GR/GI SLIP Field into change mode , so my customer can change data whenever he wants.. This field exist in vl02n transaction.
Right now it is in disabled mode .I am new to badi , so please guide me .
Regards,
Ranu.
Edited by: ranu sharma on Nov 4, 2009 8:16 AMHi,
Please note this is the client requirement to have the field editable, so please do not convey the edit entires in table to users, this is basically for our reference only,
In this case, you'll have to use the user exits to make the field editable in SAP for users, kindly check the below user exits, and take help of delveloper on the same.
Exit name Description
SDVFX001 User exit header line in delivery to accounting
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50S0001 User Exits for Delivery Processing
V56TDLIF Filter Delivery Items for Shipment
Thanks & Regards,
Rahul Verulkar -
Want to modify the partner in the fast entry tab of the trnx : crmd_order
there r 4 partners in the fast entry tab.
such as sold to party, ship to parth,
service business partner and execution partner.
in this i want to modify the execution partner with new value replacing the old one.
i tried using crmd_order_maintain, but it only adds new partner in the transactino tab but not deleting the old one.
if the execution partner field is blank then only it updates the execution partner with new one, otherwise it only adds the new execution partner in the transaction tab. leaving fast entry tab's execution partner unchanged...
<b>ITS URGENT PLEASE... PLEASE HELP ASAP...</b>
thanks in advance...
sham deshmukhHi,
All these BP informations are stored in table CRMD_PARTER. So one way one is to Modify the table directly using MODIFY command. For that you need to understand table relationship between CRMD_ORDERADM_H CRMD_LINK and CRMD_PARTNER.
Regards,
Amit -
Is Adobe doing any work to extend the Flex 2 VideoDisplay
class with more sophisticated controls, similar to what can be done
in DreamWeaver or Flash skins with seek sliders etc ? I realise
could do extend VideoDisplay or VideoPlayer myself, but it would be
nice if there was a simple way to emulate the extensive library of
video skins that come with DreamWeaver & Flash.
ThanksI have moved this question to the Flex 2 General Discussion
Forum...
Maybe you are looking for
-
Portal Runtime Error in ESS iview
Hi All, I have implemented ESS 50.4 on EP 6.0 SP9. For SAP IAC iviws i am getting following error. Portal Runtime Error An exception occurred while processing a request for : iView : pcd:portal_content/AFDB/Role/ESSRole/Office/SAPInbox/SAPInbox Compo
-
Permissions for files in /sys
Many files in /sys or /proc/sys are not readable (I get a "permission denied"), even as root. Now I do some experiment: cat /sys/module/usbhid/uevent cat: /sys/module/usbhid/uevent: Permission denied and now: [root@pcolivier /sys]# ls -l /sys/module/
-
Got this empty images after some time of work with mavericks. Anyone else with this trouble?
-
IPhone / iPod (keyboard and mouse bluetooth support)
I would like apple adopt bluetooth and keyboard support for the update on iOS 8+. I love using it like a little computer where I can use my keyboard and mouse to go through the content. Reasons: 1. Easier to click on small icons on games and software
-
Implementing interfaces and packages part deux
Ok, I've been reading some more posts, and it seems like a lot of people have the same issues as I have right now. One suggestion that i read was to go into the directory that is the package name. That is if everything is in package Grid, then go int