Want to open this 93H60005.mp4.ff.avi

Hi
Im on last maverick and last MBP.
How am i supposed to open this kind of old video files please ?: 93H60005.mp4.ff.avi
I downloaded Quictime 7 but it still does not work.

You may need the VLC Media player as noted here > http://www.macworld.com/article/2098964/how-to-play-avi-movies-in-mavericks.html

Similar Messages

Task Scheduler - How do you want to open this file

When I manually select to run a scheduled task it prompts me for which program I want to use to open it. if I let the scheduled task run at its scheduled time it shows it has run but doesn't actually do the task in the action.
the action is simply to run a vbs script, in the program/script box contains the full path to the script I wish to run c:\scripts\myscript.vbs
there are no arguments. I know someone is going to say you should put cscript.exe in that box and the script location as the parameter but that's not the point, it produces a command prompt that way which I don't want appearing and this worked fine in windows
7 the way I described above. this was an upgrade from windows 7 to windows 8, so I was hoping everything was going to run fairly smoothly by keeping all my settings, but there are some odd things going on, this being one of them.
how could I make this script run like it used to and without showing the command prompt window. cmd /c cscript c:\scripts\myscript.vbs also doesn't make the command prompt window disappear, it remains until the script finishes.
thanks
Steve

Hi,
See the following post regarding running .bat with silent mode.
http://stackoverflow.com/questions/411247/running-a-cmd-or-bat-in-silent-mode
Juke Chou
TechNet Community Support

How do you get the pop up box that ask what you want to open a document with, to not pop up at all when you want to open something from your email?

When I open a attachment from an email a box always pops up that says what program do i want to open this document with. How do i get rid of this pop up box?

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/Troubleshooting+plugins
Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Can you bypass the window that asks if you want to open or save attachments? I always open them the same way.

I would like to be able to turn off the window that asks me if I want to Open this file or Save it. I get many attachments from the same place and I would like to be able to bypass this window, as I always do the same thing -- open it.

Deleted it, restarted it. tried it again. no change. repeated the whole cycle. no change. thinking about uninstalling and reinstalling, but that won't reallyk change the settings.

Reader 9 on a Mac always says it's the first time you've opened this PDF

Since upgrading to Reader 9 Intel Macs every time I click on a PDF file to open it Reader says "You are opening the application Adobe Reader for the first time. Are you sure you want to open this application". Most annoying. Never did it with V8.

Thanks a million that fixed it. Man I had loads of permissions to fix but that must have been one as it now works fine. If I could impose on your knowledge one more time. I have been talking to Dave Taylor at Gamerzines magazine. It's a series of Gaming magazines using Reader and displaying Flash content such as Game videos etc. I'm using V9 and Flash 10 but all that happens when I click on a link on the magazine it just says buffering and nothing happens. Any ideas? I've set Multimedia Legacy to Flash and Trust has Flash as Always Allow. Plus the correct link is in the Trust Manager.

I am facing 'How do you want to use this disc' whenever I read/open any lightscribe discs having data.

Hi,
When I insert a lightscribe DVD/CD into a lightscribe optical drive, then when I click to open the DVD, I faced this error 'How do you want to use this disc', although the DVD was full of data. When opening these
lightscribe DVD/CD via NON lightscribe optical drive, I noticed that the DVD/CD opened well without any problems at all.
Also, how can the System show to me 'How do you want to use this disc' , in particular when a DVD is non rewritable(DVD-R) and also contains data)?
Bear in mind, not all DVDs/CDs were not detected. However, only full lightscribe discs' (having data)
However, even blank lightscribe discs were detected without problems. When insert a lightscribe disc having data, then I faced that error. However, when inserting blank lightscribe discs I found that the disc were opened. Also,
non lightscribe discs were opened well.
When checking the device manager, I didn't see any issue with DVD/CD drive. If there were a problem unrecongnising, then I would have seen 'a remarkable mark' in front of it.
Note: I have faced this problem after trying formating a rewritable CD inserted onto the drive. Althouthg the format failed, all data on the disc was deleted. Anyway, after that, then inserting full-lightscribe discs are unregonised
Do you think the problem wth my optical drive. IF so, I would be saying why it wasn't happened with all other non lightscribe discs. If my lightscrib discs were corrupted, then why would they have opened well on another laptop.
I have done:
Press the Windows logo key+R to open the Run dialog box.
Type devmgmt.msc in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
In Device Manager, expand DVD/CD-ROM drives, right-click the CD and DVD devices, and then clickUninstall.
When you are prompted to confirm that you want to remove the device, click OK.
Restart the computer.
But the same prolbem is existing.
yes there is a virtual CloneDrive program installed on my PC, however, there is no any CD mounted into it. Even if a CD was mounted into Virtual Clondrive, there would be no problem at all, because the virtual CloneDrive is used to only
mount ISO disc images into it, and not physical discs.
Any I have do what you have said, when inserting a light-scribe disc having data, then I open it, I found this
NOTE: in the above screen shot there is a lightscribe DVD having data inserted. However, in the screen shot below, there a ightsrbe DVD not having data inserted. In the first screen shot, the disc is not reconginsed by Windows, however, in
the second is recognised.
Even when I have inserted a lightscribe disc not having data(empty), it opened well regardless of what virutal CloneDrive is enabled or disabled.
But when cliced on my problem didn't solve,
A man should convert his anger and sadness into strength to continue living in this life.

Hi,
The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
Notebook PC support
The number of my computer is : LM610EA#A2N.
Could anyone please at this splendid forum take some of their precious time
out to really reply my questions and solve my problems?
FIRST OF ALL:
My HP Pavilion Laptop is about 3 years old.
My
sister's Dell Inspiron laptop is 3 years old.
My HP lapotp is well-cared, as opposed to my sister's Inspiron Dell laptop,
which is always thrown in dust without caring at all. Also, its battery is
always inserted even when it is fully charged while the laptop is plugged in to
the main power supply.
However, my laptop is either used on only battery, or on plugin. Also, it is
kept from the dust.
But, I really found that the battery of the Dell laptop
still lasts about three and half hours, and there is no problem cooling fan is
not oproperly preporly.
I only remember one thing differently done on my laptop battery which is I
charged it fully, then I stored it without using it for about four months, then
when I reused it, I found it got worse over time. I.e. first time of using it
after storing,I found it empty, then I charged it again fully, however, then it
lasted about 2 hours, then 1 and half hours, next an hour, now it is only
lasting about 20 minutes without performance. If there is high performance, then
the computer shuts down suddenly.
My problem is follows:::
First: Whenever I inserted any Containing Data OR Data
CD/DVD-R LightScribe discs, I found that HP optical driver was
unable to read them. When clicking on the optical disc drive
'duble-click', then I find that disc opens as this way(NOT: With a CD/DVD player
is grayed out)
Blank Or Used CD, DVD±R,RW lightscirbe is unable to be
read:(clicking on it let it Open like a USB FlashDrive or With a CD,DVD player:
NOTE: with CD/DVD Player is grayed out)
Used CD/DVD±R/RW Non-LightScribe disc opens normal:
Blank CD,DVD±R,RW Non-LightScribe opens normal(Opens like a USB FlashDrive or
With a CD,DVD)::
My HP CD/DVD DVD±R/RW specis are::
Optical Drives
hp CDDVDW TS-L633R
Media Type DVD Writer
Name hp
CDDVDW TS-L633R
Availability Running/Full Power
Capabilities Random
Access, Supports Writing, Supports Removable Media
Read capabilities CD-R,
CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
DL, DVD+R DL
Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
DVD+RW, DVD-R DL, DVD+R DL
Config Manager Error Code Device is working
properly
Config Manager User Config FALSE
Drive E:
Media Loaded
FALSE
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 0
SCSI Target Id
1
Status OK
Trying to solve the problem,
I have done these steps in order::
I tried checking with dignostic ulitiy:
I have tried Advanced View , this is the file of output data
diagnostic utility
LightScribe System Software Settings:
SOFTWARE\LightScribe\MessageDir
C:\Program Files (x86)\Common
Files\LightScribe\
SOFTWARE\LightScribe\LSPrintDialog C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintDialog.exe
SOFTWARE\LightScribe\LSPrintingDialog
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintingDialog.exe
SOFTWARE\LightScribe\LsPrintLauncher
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintLauncher.dll
SOFTWARE\LightScribe\ResourceDir
C:\Program Files (x86)\Common
Files\LightScribe\res
SOFTWARE\LightScribe\LSPrintAPI C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintAPI.dll
SOFTWARE\LightScribe\Update\UpdateShellCommand
http://www.lightscribe.com/go/downloads/windows
SOFTWARE\LightScribe\Update\PreviousVersion
1.18.20.1
SOFTWARE\LightScribe\Update\CurrentVersion
1.18.27.10
SOFTWARE\LightScribe\Update\TrailingVersion
SYSTEM\CurrentControlSet\Services\LightScribeService\Type
16
SYSTEM\CurrentControlSet\Services\LightScribeService\Start
2
SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl
0
SYSTEM\CurrentControlSet\Services\LightScribeService\
SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName
LightScribeService Direct Disc Labeling
Service
SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName
LocalSystem
SYSTEM\CurrentControlSet\Services\LightScribeService\Description
Used by the LightScribe software components to support 3rd party disc labeling
applications using the LightScribe COM Application Programming Interface
(LSCAPI). This service needs to run for LightScribe direct disc labeling to
work.
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported
7
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0
IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1
SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Winlogon\allocatecdroms
0
SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
SOFTWARE\INTEL\Intel
Application Accelerator Not detected
Drives and Media:
Drive 0 : hp CDDVDW TS-L633R 0300 219 (E, Media
Imaging Parameter : 114
I tried running the below command line to fix potential disk issue 'Chkdsk
/r /f'
I cleaned the drive, discs, and so on.
I have uninstalled the all third-party data recording software.
I have uninstalled the Cyber DVD suite, lightscribe system software which
came pre-installed with my HP pavilion Notebook.
I have recovered my system from the Factory Recovery discs.
I have tried opening all those LightScibe discs not opening on my HP optical
drive, on a Dell optical drive, and all of them were opened well, although Dell
optical drive did not have a lightscribe feature at all., nor third party disc
recording software
However, the problem is still with opening the discs LIGHT-SCRIBE
Thus, my questions are:
How to determine if the drive is corrupted and needs to be replaced with
another one.
I think there something needed to be done on the BIOS Of my HP
laptop[[[A similar problems happened on my Desktop computer's optical
drive which is as follows:::(ALL discs are opened as empty by Optical Drive of
My Desktop Computer) ---while my optical drive of my desktop was connected to
the primary slave IDE, and the HDD was connected to the
primary master IDE, the optical drive and hard disk are functioning
well. However, I remember that while burning an image with Nero essential V: 5,
something went wrong, and then the Optical Drive of My Desktop Computer
(HL-DT-ST DVD-RAM GH22NP20) became NOT recognised/Installed on
BIOS, although it was still shown on the device manager as a
recognised device. Also, it was listed on my computer, however, when entering a
disc(blank or with data) into the drive, I found it was not recognised, and it
opened empty(no files at it), although it contains data. Thus, I decided to boot
to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was
still shown as installed on BIOS. However, the optical drive was not. Th I tried
clicking on it on BIOS and then clicking on 'enter' to try to let the device be
re-recognized. However, that made no difference. I had to take part my computer
,and then reconnected the optical drive onto the secondary slave
IDE , and let HDD connected to the same primary master IDE.
Then, I found that the problem solved and all discs became being read
normally. Aslo, optical drive became installed on BIOS]]]
What is meant with with double Layer Support.
How much does it cost?
A man should convert his anger and sadness into strength to continue living in this life.

How I can solve this problem or manipulate it ports 80,443 are closed by ISP and they don't want to open it

hi,
I see that I have a particulier abonnee of my ISP , which has closed all the ports for security reason and they don't want to open any of it 80,443 ect.
suppose If I want to use Essential server 2012 how I can solve this problem , essential wants domain name whith A record.
I asked DDNS service provider if I lease from them a domain name whith A record would that help to open or manipulate the port 80,443 they said that I have to solve this problem myself . they lease only domain names with dynamic dns records.
so what can be a solution the ISP provider won't open this ports , how I can solve this problem . domain name with ip adres is not helping so what it's go to help?
thanks
johan
h.david

The domain name in this instance is only used for remote access, and is seperate from the active directory domain name.
If your ISP blocks port 80 and 443, and you dont intend to use remote access anyway, the wizard will likely not complete successfully whether you have a valid domain name or not.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Can someone help me? How do I change the option to pick where or what program I want to open a file after I've downloaded it? I tried to look for an option for this and can't find it anywhere.

For example I download a file and I click on it and there will sometimes be a window that opens saying what program I want to open the file with? And then it'll also have a check box saying if I want to use this program for all files I download. I can't change it when I download the file because that one file I keep downloading keeps crashing my Firefox and I have to force quit. It's really getting on my nerves. It's an online statement I'm trying to view and I want to get rid of that problem!! Is there anyway to change that option without going to that download page?

I would recommend going into device manager on your PC and making sure that you have correctly installed the IR dongle. Also what version of hotsync manager are you currently using?
Post relates to: Treo 800w (Sprint)

When I want to open a PDF document The box that pops up asking if I want to open or save does not come up and it always saves. I need this changed.

When the window opens to ask if I want to save or not comes up it does so for WORD documents just fine, however, for PDF documents it never asks (it used to). Now it just automatically saves them without asking. I need this changed. I went into applications and changed the setting to always ask but it still is just saving, them no window pops up asking what I want firefox to do with the file like it does with a WORD document. IF I cannot get this resolved I will not be able to continue using firefox. I teach and I have students submitting articles etc in pdf format, I cannot constantly save all pdf files. I just want to open them, review them and then move on. There must be a way to change this so that the window asking what I want firfox to do with the pdf files opens.
thank you,
kkwright

Deleted it, restarted it. tried it again. no change. repeated the whole cycle. no change. thinking about uninstalling and reinstalling, but that won't reallyk change the settings.

When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?

When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?

mostafa182 wrote:
... how I can solve this problem?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

I want to open excel spread sheets make additions and export back to pc users. Is numbers suitable for this activity?

I want to open excel spread sheets make additions and export back to pc users. Is numbers suitable for this activity? I am using a MACBook Air

just read this in an other answer:
Pages can open docx files, Numbers can open xlsx files. Each can export to can export .doc or .xls to the newest Word or Excel format.respectvely, but not to the more recent .docx or .xlsx.
Translation is not perfect in either direction. Numbers and Excel handle some similar features (eg. pop-up menus vs data validation) differently, and the translator cannot translate from one implementation to the other.
If much of your work is going to be transferred between your machine and Windows machines running either MS Excel or MS Word, with editing taking place at both ends of the tunnel, then you'll probably be better off with Office, or one of the Office clones on the Mac end.

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

URGENT--Need to supress "Do you want to Open or save this file" for (CSV AND DOC FILES) in IE 8, IE 9 on Win XP and Win 7

Hi
In our Task in Salesforce we generate one CSV file and one doc file after one button click on salesforce screen. we need to download these two documents without the popup message "Do you want to Open or save this file"
Pls suggest Registry Edit Option Or any IE browser configuration or any
code to get rid of this popup as this is very critical for our Task.
Thanks
Kartik

Thanks Alex... I saw this in another Forum and could you pls let me know if this works...that is there is no prompt on CSV download
Begin in: HKEY_LOCAL_MACHINE - to change settings for all users
HKEY_CURRENT_USER- to change settings for the current user
Then browse to Software->Microsoft->Internet Explorer->Main->FeatureControl->Feature_Restrict_File_Download
And then set the Value iexplore.exe to 0. If it doesn't exist: Create it (DWORD).
Thanks
Kartik

After updating my MacBook Pro to yeosemite I want my old screen saver picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this

After updating my MacBook Pro to yeosemite I want my old desktop picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this folder. It is in TimeMachine".

Can you browse the Time Machine drive from Finder?
If you can and you know where the picture was stored ie on your desktop you can browse through the folder structure to the picture copy it and paste it somewhere on your new install before right clicking it and 'set as desktop background'

I am unable to open files on amything!!! a box pops up that asks me what do i want to open the file with..every time!! I want files to open when i click on them!! This happens with emails, websites, everything

I try to open attachments in emails and they will not open! A box comes up asking 'what do I want to open the file with', and it wants me to select from a list of options like - Firefox, IE, Word, Yahoo Browser. When I make a selection (usually Firefox) a new tab opens with a blank page! This always happens on attachments, links, websites......everything!

These files were lost two years ago.
That's not consistent with what you wrote in your first message. I can't help you unless I know what's going on. Either you do, or do not, have backups of all the data you want to keep. If you do not, then the first thing you need to do is back up those files. It makes zero sense to do anything else. In order to back up, you'll need either of two things: another Mac, in working order, with a FireWire port and enough space on its internal drive to hold your files; or an external drive, also with enough space.
On the other hand, if you do have backups, or if you simply don't care about any of the data, then the solution to your problem may be quite simple. All you have to do is boot from your installation disc (your profile says you're running Mac OS 10.5), erase your internal drive, reinstall the Mac OS, then restore your data from backup. You will need to be selective in restoring software, because incompatible software may be what caused the issue.
But it's also possible that you have a hardware failure, in which case you can't get your computer working again until it's repaired.

Want to open this 93H60005.mp4.ff.avi

Similar Messages

Maybe you are looking for