Want to perform live with Garageband... How do I hook up to a PA system?

Looking to use My iMac G5 live on stage to run backing tracks while I play keyboards live. What is the best way to hook up the computer to the PA system? Can I do it direct or should I use my M-audio MobilePre USB?
Please Advise...
thanks

Setup AirPrint Printer
1. Buy an AirPrint enabled printer; see list below
http://support.apple.com/kb/ht4356
2. Run the CD provided and set printer and iPad on the same network
3. Start printing from your iPad using AirPrint

Similar Messages

Performing Live with Logic Pro - any tips?

Hello to everyone on this forum,
I only recently joined, but have been using Logic ever since I learned to engineer my own music.
I was wonderring if anyone here performing live with Logic?
I have been using this programm since version 4 and ever so happy with it as far as the recording in the studio is concerned. However the time has come to try and play it all out live.
Many of my friends suggested Ableton Live. I went ahead and purchased it. But to my great disappointment the midi section of Live is far from perfect. I couldn't get a simple task of changing programs and banks to be communicated to the external modular properly and after a week of frustration I am back on Logic's case.
Majority of my songs up till recent have all been written with audio files, where Ableton would be very useful, but all the new stuff is using the midi. So I am in split minds about the situation.
I am not quite sure how to set up a live performance of a few songs in Logic. Any tips here would be appreciated!
Also do any of you use Ableton and Logic at the same time on stage? Is it safe on one computer? I mean how likely is it to crush during the show?
Much respect to all in the know.
Natalia
imac G5 Mac OS X (10.4.7) LogicPro7.1/Saffire/Midisport2X2/NordG2Modular/KorgER1/EA1/Novation SL37

If you do a search on this forum for this very topic, you should find your answers there. Hope this helps!
X
and welcome to the forum!

My mac OS X did not come with GarageBand, how do get it for free?

My mac OS X did not come with GarageBand, how do get it for free?
I don't want to pay for garageband because it should have come with my laptop but it didn't. I got it used so that might be the problem. Also I installed leopard on it. I'm not sure if that would affect it at all. Please help. Thanks.

Okay, so you bought the machines used?
What OS version was on it when you bought it?
You bought Snow Leopard (10.6.x) and installed it?
The original version is important because there were some OS versions that did not include iLife (incl. Garageband) - you had to get it separately. And, the retail Snow Leopard disk does not include it.
So, if that is correct, then it doesn't have to have it installed. In any case, you can still buy a retail version of iLife with the full suite of apps from online retailers; either version 09 or 11 will work with your OS. Or you can just buy Garageband at the app store.

Playing live with garageband

I want to make an arrangement on garageband and have it follow my tempo when I play. I'm a music teacher. I want my accompaniments to be fuller by including a garageband arrangement. But, I'm still playing my guitar or keyboard live. My students may rush or drag, etc. Will garageband follow me when I have to adjust my playing live?

There are programs available that will allow you to adjust tempo on the fly, but nothing that can 'sense' your fluctuating tempo and compensate for that. The programs that do allow you to adjust tempo require you to either tap a button 4 times at the new pace or turn a knob on a controller that has been mapped to this tempo function on the softwares user interface. Either way you would have to stop playing whatever instrument you were playing to make the adjustment (unless you used a foot switch) and you would always be a measure/bar behind.
If you want to stick with GB you could make your arrangements and by using the tempo slider start everybody off at a much slower tempo, then you could nudge it up a few BPM every time you go through the piece.

I use iCal, work wants me to sync with Outlook, how do I do this?

Dear Community.
I'm happily using iCloud to run my diary across all my Apple devices, how do I get my current setup to sync with Outlook so my office can see my diary?
I don't want to change how I make appt's, I can make an appt on my phone, iPad or MacBook and it'll sync nicely, I just need to be able to share one specific Work diary in my iCloud/ Apple account with Outlook. I use Outlook on my MacBook for email only, I have no interest in using the calendar function other than to keep it synced to allow my colleagues to access it.
Any help would be greatly appreciated. It's bad enough that people want to be able to track my daily schedules, without having to spend hours trying to figure out how to keep the system I have for diary management and not have to move everything just to placate someone.
Thank you in advance.

Hi Crackyrich,
I may have a possible solution for you. Since you have everything set up in iCloud, have you tried the Calendar sharing feature? You can create a work calendar to keep it separate from your personal calendar, and share the work calendar privately or publicly. Here's how:
iCloud: Calendar sharing overview
http://support.apple.com/kb/PH2689
You can share a calendar both publicly and privately with other people. Sharing gives you flexibility in managing calendars. For example, you could create a calendar for your child’s sports team and share it privately with just the coaches so they can edit it. You could also share it publicly with all the parents so they can view (but not change) it whenever they want.
Sharing works as follows:
Public calendars can be shared with anyone. To access public calendars, visitors need to use Calendar on a Mac, Microsoft Outlook on a Windows computer, or any other app that supports the iCalendar file format.
A public calendar can’t be edited by anyone but the calendar owner (the creator).
Private calendars can be shared with other iCloud users.
Participants can view the calendar using iCloud Calendar; the Calendar app on iPhone, iPad, iPod touch, or a Mac; or Microsoft Outlook on a Windows computer.
As the owner (creator) of a shared calendar, you assign edit privileges to the invitees to control who can modify the calendar. There are two types of access privileges that can be assigned:
Participants with View Only access can:
View the calendar and change their view (from day to week, for example), without affecting the view of other participants
Change their own calendar preferences
Participants with View & Edit access privileges can do everything listed above, plus:
Create and delete calendar events
Change details (for example, the name, date, and time) for calendar events
Track the responses of guests invited to a calendar event
Participants can’t invite new people to a shared calendar.
Note:    If multiple participants try to edit a shared calendar at the same time, the changes that are saved first are kept and reflected in the calendar. The person whose changes arenʼt saved sees a message that his or her changes werenʼt saved.
If you disable your iCloud account, any shared calendars you created become unavailable; all participants automatically receive an email notifying them that the calendar is no longer shared.
Last Modified: Jan 8, 2015
iCloud: Share a calendar with others
http://support.apple.com/kb/PH2690
iCloud: Share a calendar with others
You can share a calendar both publicly and privately with other people. For specifics about viewing and editing privileges for shared calendars, and how participants can access the calendars, see Calendar sharing overview.
Share a calendar privately
Click the Share button to the right of the calendar name in the sidebar, then select Private Calendar.
Note:    You can also share the same calendar publicly. For instructions, see the next task, “Share a calendar publicly.”
Type the invitee’s email address in the Add Person field and press Return.
Click the pop-up menu with the invitee’s name and choose access privileges (View & Edit or View Only).
For each person you want to share the calendar with, repeat steps 2 and 3.
When you’ve invited everyone and set their privileges, click OK.
Invitation emails are sent from your iCloud email address to the participants you specified.
Share a calendar publicly
Click the Share button to the right of the calendar you want to share, then select Public Calendar.
Note:    You can also share the same calendar privately. For instructions, see the previous task, “Share a calendar privately.”
To invite people to view the calendar, click Email Link.
Type one or more email addresses in the To field, then click Send.
The people you specify automatically receive an invitation email that includes the calendar’s URL. An invitee doesn’t need to be an iCloud user to accept an invitation to view a shared public calendar.
In the sidebar, a shared calendar has a dark Share button.
You can also resend invitations to one or more invited participants at any time.
Last Modified: Jan 8, 2015
Hope this helps ...
Judy

I want to access newsserver with java ,how can i do?

where have the info for this?

You may use JavaMail with NNTP service provider.
Here's one implementation http://www.dog.net.uk/knife/

Just want to say os7 is junk and I want to start over with os6 - how?

My iPad was great until I accidentally "upgraded" (well, really down graded) to os7. Will somebody at Apple tell me how to fix?

I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
You may leave comments at Apple Feedback.

Performance analysis with SE30

Hi,
I want to know about performance analysis with SE30 How much should be percentage of DATABASE SYSTEM and on ABAP how to reduce the load of system and which is more critical load on DATABASE OR abap, also for my report i have checked with different parameter according to the posting period which i have selected the graph is changing
regards,
zafar

There are a variety of materials on the subject of Performance Analysis and SE30. If you'll take the time to search the blogs and articles in SCN, I'm confident you'll find something useful...
Percentages vary, depending upon what we're doing, which tables we're using, how many tables, etc. So, there are no hard and fast rules about what the percentages should be (so far as I know). Generally, very high database percentages can predict long runtime if one is obtaining a large number of data rows, and suggest (to me, at least) the need to review the select statements within the ST05 trace tool, to be sure I'm utilizing index and doing so optimally for each table I'm reading, that I'm not bypassing SAP buffers if not necessary, etc.

HT4622 Collaborating with GarageBand using iPads

A friend and I want to start collaborating with GarageBand using our iPads. What is the easiest way to share project files so they can be worked on by either of us? Thanks for any help.

The easiest way would be to share the GarageBand Project to iCloud and and access it from iCloud. Only that would require you both to use the same AppleID with iCloud, and that is not recommended.
The other way to transfer projects between iPads requires a detour to your computers. If you both have macs, share your GarageBand project to iTunes on your mac, then copy it to your friend's mac and share it to your friend's iPad using your friend's iTunes library.
How to share GB projects from IOS devices to Macs is described here:
Share GarageBand songs
See the paragraph:
Send a GarageBand song to iTunes:
Tap the My Songs button, then tap Edit.
Tap the song you want to send, then tap the Share button .
Tap Share Song via iTunes.
Do one of the following:
To send the song as a GarageBand song, tap GarageBand.
To send the song as an audio file, tap iTunes, then tap Share.
After you tap the iTunes icon, you can choose the quality of the file GarageBand sends to iTunes. You can also add artist, composer, and title information that appears in iTunes.
Sync your iPad with your computer.In iTunes, the exported song appears in the Documents list in the File Sharing area when GarageBand is selected.
Do one of the following:
Drag the song from the GarageBand Documents list to the Finder.
Click Save As, navigate to the location where you want to save the song, then click Save.
You can open the GarageBand song in GarageBand on your Mac, or play the audio file in iTunes (or any compatible audio application) on your computer. GarageBand songs cannot be opened on a Windows computer.
If your friend has a PC and not a mac, it will be more involved, see: Re: Loading a .band file back into Garageband (iPad 2)
Regards
Léonie

Performance issue with MSEG table

Hi all,
I need to fetch materials(MATNR) based on the service order number (AUFNR) in the selection screen,but there is performance isssue with this , how to over come this issue .
Regards ,
Amit

Hi,
There could be various reasons for performance issue with MSEG.
1) database statistics of tables and indexes are not upto date.
because of this wrong index is choosen during the execution.
2) Improper indexes, because there is no indexes with the fields mentioned in the WHERE clause of the statement. Because of this reason, CBO would have choosen wrong index and did a range scan.
3) Optimizer bug in oracle.
4) Size of table is very huge, archive.
Better switch on ST05 trace before you run this statements, so it will give more detailed information, where exactly time being spent during the execution.
Hope this helps
dileep

Step by Step how we can connect SAP CRM to External system..

Hi Experts,
I want to know the informations of how we can connect sap CRM to External system, and what are the settings we have to do ,to enable XIF adapter..
This is very imp requirement kindly give support.., how we can connect to other system..through XIF Adapter..??
IS it possible to create ZBAPI in SAP CRM..?
Thankz in Advance
Regards
J Sarathi

Hi,
- Xif adapters and service process the BDOC messages.
- adapters for inbound and outbounfd processing.
-it will forward the messages from the inbound queues to the control component.
-BDOC is a business document where the flow of data to and from the CRM system takes place.
-Bdoc is a container that contain business data
- it describes the hierarchial structure of the business data.
-you can also create custom specific BDOC types,
-BDOC's as a data container to process business objects as one unit and this avoid having to transport several individual tables.
Bdoc types are found in BDOC repositry.
Bdoc types have two part
Header- consist of one single segment so-caooed control segment
Body - consist of one or more data segment
Idoc having three types of data:
control record
Data record
status record
hope it will useful.
thanks
Hemant ghiya

How to connect to Xbox Live with the Actiontek GT704-WGB wireless router

If the title got you here, then you are probably a Verizon DSL customer who is trying to connect your Xbox to Xbox Live with the Actiontek GT704-WGB wireless router and are getting nothing but errors saying, "your NAT is set too high", or, "Your MTU setting is too low", etc. Well, after many calls to Xbox support, Actiontek support, and Verizon support, I finally came up with the solution myself.
All that is needed is a little techie know-how about router settings and you'll do just fine! However, if you are uncomfortable with doing it yourself (and it is really really easy to do!) then you can call Verizon support and have a tech support rep remotely conntect to your PC and make the changes for you: however, you have to speak with someone in advanced tech support and to do that you have to agree to a 1 year support contract to the tune of $14.95 per month in order for them to do it! Scam??? You be the judge!
So, here are the steps to take to get it working and by the way, YOU CAN NOT GET THE XBOX TO CONNECT TO THIS ROUTER WIRELESSLY!! YOU MUST CONNECT YOUR XBOX TO THE ROUTER WITH AN ETHERNET CABLE IN ORDER FOR THIS TO WORK!!! If you don't heed this warning, you will unfortunatly go through all the steps below, only to find that you get the same errors but, ethernet is faster than wireless so it's better!....right?.....right? (hears crickets chirping)....right? Oh well, I tried! Also, you must have your Xbox on in order to change the router settings (which you'll see why later) Anyway, here's the steps:
1) On your PC, open a browser window and type in the address bar: 192.168.1.1 and press enter.
2) You will then see the interface on which you will make changes to the router's settings. If at any time you are prompted for a username and password (which should happen right after you press enter) the defaults are: username: admin password: password. If you have changed these, enter what you changed them to.
3)Click on the icon on the top labelled "Advanced Setup"
4)In the left section, click "WAN IP Address"
5)At the warning screen, click "yes"
6)Scroll down until you see "MTU setting" and enter 1370. NOTElease don't be tempted to either enter 1500 or leaving it at 1500 (which is the default) because you might know that 1500 is the maximum at which this can be set which is TOO HIGH AND WILL NOT WORK! Trust me and enter 1370 and then click on "apply"
7)Click on the top icon labelled "Security"
8)In the left column, click on "applications". This is where we are going to open the 3 ports that Xbox Live uses to communicate with your Xbox.
9)In the drop down box labelled "PC Name" select "Xbox 360". This is why you had to have your console on and connected cuz if you didn't, it would not show up on the drop down list!
10)Under "category" click on the bubble next to "user"
11)Click on "New" which is one of the blue buttons near the bottom.
12)As for the rule name, I entered "Xbox" but you can put whatever you want but I'd use that so you know it's the ports you opened for the console.
13)For protocol, select TCP. (Yes you will also open the same ports for UDP but for some reason if you select TCP.UDP instead of doing them seperatly it doesn't work.....I dunno why!?
14)For all 3 "Port start", "Port End", and "Port Map Start" put the # 80.
15)Click "apply"
16)Now, select UDP and put the same port # 80 and again click "apply"
17)Repeat steps 13 through 16 except with the numbers 3074 and 53, clicking apply after each one. What you should have now on the bottom are a list of all the ports you opened, one TCP and one UDP for each number totalling 6 entries.
18)Click "back" to return to the Applications screen.
19)If you have to, select Xbox 360 for PC name, and click the bubble next to "user" and you'll now see the entry called "Xbox" or whatever you called it.
20)Click that entry to highlight it and then click the blue "add" button to the left and then click "apply" at the bottom.
21)Close the browser screen and turn off your PC and Xbox and any other hardware connected to the router.
22)Turn the router off and unplug it and wait about 5 minutes. It can take this long for any residual current in the router to dissapate and for the NAT table to clear itself.
23)Turn on the router and wait for the internet light to come on green meaning the router has booted and has an internet connection.
24)Turn on the Xbox AND ONLY THE XBOX!
25)There is no need to go into network setting as when the Xbox is connected by ethernet, it automatically configures and connects intself. You can, however go into network settings and perform a connection test but this to is not necessary.
You now should be able to connect to Xbox Live! If not, you've done something wrong and must either go through all the steps again or let Verizon do it for you (for a fee that is).

I followed jtktlw's instructions to the letter. Problem was I had already enabled UPnP before doing so. Afterward I disabled UPnP and rebooted....no change. I reset the MTU to 1500...boom, it works. Seems for me all I needed was to open the right ports to get it to work.

How can I record my guitar amp with garageband?

Hello, new member and new to recording with garageband!
I would like to capture the live sound of my guitar amp using garageband. I know there are many modelling and FX options using GB, but I really want to hear how my amp sounds.
I'm using the following:
-macbook pro and garageband
-Presonus Inspire 1394 interface
Traynor YCV 50 all-tube guitar amp
-Shure SM57 mic
-Yamaha SG700 electric guitar
So far, the results have been dismal. My main instinct was to keep all levels in the green and go for it. I used the most basic setting in GB with no effects added. All attempts sound like I'm playing into a garbage can.
Any quick tips would be appreciated, please and thanks!

Your setup should be getting excellent results.
Are you using a real instrument track?
Are you sure garageband is getting the input from the Shure and not the built in mic?
Is the mic close to the speaker / pointed at the speaker / have you tried pointing it at different parts of the speaker?

How can I remove an account and apps from another user from my Ipod. My nephew used to live with me and everytime I sync my Ipod his stuff is added to mine. I have no way to contact him for his password.

I need to know how to remove an iTunes account associated with my computer. My nephew used to live with me but has moved out. Everytime I sync my iPod touch his stuff is added to my device. I have no way to contact him to get his password. How can I make this go away. He listened to music that is very offensive to me and I dont want it in my library or playlists. Any help would be greatly appreciated.
Thank you in advance,
Shelly

You can use computer iTunes to help.
Connect your iPod Touch to Computer's iTunes
In iTunes, select your iPod Touch under DEVICES (left pane).
On right pane select Music at the top.
Now you can de-select the music/playlist or anything you don't want and click Sync button bottom right.
You can do the above for Apps, Books, etc.
You can of course, de-authorize the computer in iTunes menu Store.
Note: That will make everything using his AppleID inaccessible.

How do I create ringtones from iTunes songs with Garageband?

I have an iPhone 5s. Is it possible to convert itunes songs into ringtones with Garageband ios?

Yes, you can, if you sync your iTunes songs to the Music.app.
See this Help-Page:
http://help.apple.com/garageband/iphone/2.0/index.html#chs39284d66
Share a GarageBand song as a ringtone or text tone
In the My Songs browser, tap the Select button, then tap the song you want to export (or touch and hold the song).
Tap the Action button , then tap Share Song As Ringtone.The Export Ringtone panel opens, showing the name for the ringtone. By default, the ringtone uses the same name as the song.The maximum length for exported ringtones is 30 seconds. If the exported ringtone exceeds the maximum length, a dialog appears. Tap Continue to have GarageBand shorten the ringtone automatically, or tap Cancel to return to the song so you can shorten it.
To rename the ringtone, tap the name and type a new name.
Tap Export.
In the Ringtone Export Successful panel, do one of the following:
To return to the My Songs browser, tap OK.
To choose a use for the ringtone, tap Use sound as, then do one of the following:
To use the ringtone as your standard ringtone, replacing the existing ringtone, tap Standard Ringtone.
To use the ringtone as your standard text tone, replacing the existing text tone, tap Standard Text Tone.
To see a list of your contacts, tap Assign to Contact, then tap the contact you want to use the ringtone with.
To return to the My Songs browser without assigning the ringtone, tap Done to return.
The next time you sync your device, the ringtone also appears in the GarageBand File Sharing area in iTunes. You can drag it to the Tones list to add it to your iTunes ringtone library.
And see this page, how to add a song from the Music.app to a track in GarageBand:
Import a song from the Music app http://help.apple.com/garageband/iphone/2.0/index.html#chsb3f15dc4

Want to perform live with Garageband... How do I hook up to a PA system?

Similar Messages

Maybe you are looking for