Want to record edit and burn dvds of videos from canon camcorder what is the best way
what is the easiest way to transfer recordings from my canon camcorder hd to dvds after editing. The new imovie does not have idvd on it to burn dvds.
I'm assuming you're editing in iMovie? If you still have an older retail version of iLife, you can use that to install iDVD - I am using it with mavericks. Or, the retail 09 and 11 iLife disks are still available at some online resellers. The best thing out there still is iDVD with its customizable menus, themes, etc. However, there are other options for just burning: one good ons is Roxio Toast; then there is the free app Burn (basic I'm told, but works). Or google for others. Personally, I'd get iDVD.
The new iMovie (or the older versions) did not have iDVD built in - it's just a link to the iDVD application. FWIW, I prefer to use the older iMovie versions because they have more quality options to choose from when exporting. With the new iMovie, choose to export to file and choose your recording size and then you can drag that file into a burning app (or iDVD if you get it).
Similar Messages
-
I have Acrobat 9 on a PC I no longer use. I want to download and re-install on a different PC. What is the best way to do this?
Hi Chaos2015,
Could you please specify whether you have Acrobat 9 Pro or Standard version.
You need to deactivate Acrobat from the old machine and then install on the new one from a CD/DVD and then activate with the same serial key.
If you do not have installation media, then you can download the Pro version from the below mentioned link:
Download Acrobat products | 9, 8
Please note that you can activate the software on maximum two computers. For example: Your desktop at work and laptop at home
Regards,
Anubha -
Cd or dvd? rw or r? what is the best way to burn disk?
Im almost just lost all my songs, trying to do this before, so what is the best way for burning a cd from itunes?
I've heard its better with a cd and r (i believe that means you can only put songs on it once?)
please help! i rather not lose my hard earned and searched ituens music!As long as you're not having to use too many CDs, and don't care that you can't erase them, then CD-Rs would be fine. If you want to try DVDs and you had problems before, first confirm what format your drive takes - some use only DVD+R (or RW), some use only DVD-R, and some can take both - and perhaps try a different brand of disk; some brands just don't work well, and some drives just seem to prefer different brands.
-
I have 2 users on a MAC each with separate accounts (email, photo, ITunes) and I want to migrate my ITUnes Library over to a time capsule so that each usewr still has their own library bu don't want to duplicate songs. What is the best way to have both Itunes pointed to separate libraries both stored on the Time Capsule?
A bit of basics on iTunes. iTunes does 99% of what you see through a library.itl file in the iTunes folder. This file is a database and in it are references to the actual media files. These files can be anywhere in theory, but if you have iTunes set to default then they are nicely organized in media folders in the iTunes folder. You have probably moved them to some central shared location in the past, then built up two individual libraries around that central location.
iTunes is very fussy about a person dragging files to a different location, and that goes double if the other location is on a different drive. You can move files, but it is best to let iTunes do it so it can keep track. If this was just for one person I'd say go into preferences, select the other drive for media location, then close preferences. My understanding (never done this before) is iTunes will then ask you if you want to move your media. Say yes and iTunes will move it and keep track of it -- for your library. Now when you go to the other person's library, it opens and you see loads of ! because their library is still looking for the media on the same drive as the library is located on. I don't think it will work (but you could always try) to re-assign the media location to the external drive because the reference in the database is to look for such-and-such a file on the internal drive. iTunes did that for the first library as part of the move, but not for the second one. Note that typically when you want to move a single user's collection from drive to drive we advise moving the whole iTunes folder, library files and all, to another drive, but you don't have that structure.
So I'm not sure what to advise. If it were me and I was absolutely gung-ho on doing this I would re-assign the media with one library. Then edit the .xml version of the library file for the second library so it points to the new file locations and import this into a fresh iTunes library for the second user. This isn't the perfect solution because nominally the .xml version does not 1005 replicate all the characteristics of the original .itl file (which cannot be edited).
Or maybe some other user bas a better idea. -
My hard drive died. I installed a new one and want to restore from my Time Machine back up, but my DVD drive will not read my Snow Leopard upgrade disc. It did read the grey Tiger install discs that came with the coumputer, so I now am back to 10.4.11, but how do I restore from my Time Machine backup from this point? The system does recognize the Time Machine Drive, but "restore from backup" simply copies the entire contents to new hard drive. have access to an external USB DVD drive, but I cannot boot my Snow Leopard upgrade DVD from it.
This article contains instructions for reinstalling OSX on older Macbook Airs. It should also apply to your situation. Give it a try.
-
Recent software upgrades has changed the way my iPhone syncs with my macbook and items entered on my iPhone are no longer uploaded to my macbook. I've tried to fix it and seem to have made things worse, my iPhone now has a long list of calanders that I don't want and can't delete and nothing is uploading to my macbook.
You need to look at Mac's iTunes, check > System Preferences > iCloud.
If you use iCloud for Calendar, Contacts then turn off those items in iTunes, Info tab with your iPhone connected and selected. -
I want to give away my old Mac Powerbook G4 to a friend, what is the best way to cleanly do this?
I want to give away my old Mac Powerbook G4 to a friend. Ideally I'd like to get my iphoto/itunes library deleted, but am afraid it will delete itself on my new MacBookPro as well. This would be tragic. Ideas?
If you used the migration assistment then your data will be okay.
I (and most of the people here) would strongly recommend you reformat the computer before giving it to anybody -
What is the best way to make my file in FCPX Compatible for a DVD.
I am working with a file that is about 53 minutes in length. The video is broken up into 14 3to5 minute videos. During my project, as I completed each video, I saved a master file and shared as APPLE PRO RES so that I wouldnt lose anything as this is my first time working with FCPX. This made a hi-def quicktime file of each video (came out great). Now I need to put the entire project together. My individual master files are about 4g a piece and I would imagine putting them together, will be way too large to make a dvd with.
My question is what is the best way to put it all together and export/share? I have all of the original projects still in FCPX, do i copy and paste them into one big file? Then share, and If I share what format should i share with? I need to take the file, throw it on a external HD and put on my laptop to create the DVD in IDVD. Needs to be decent quality for the DVD. I have read that I can create a DVD right from FCPX, but that would be impossible as I am working on a new imac with no burner!
ANY HELP WOULD BE GREATLY APPRECIATED!jpqb48 wrote:
My question is what is the best way to put it all together and export/share? I have all of the original projects still in FCPX, do i copy and paste them into one big file? Then share, and If I share what format should i share with?
All sounds good.
Create a new project and paste your 14 videos (projects) sequentially into it, Perhaps insert a gap clip and put in chapter markers if you want. Share>DVD. Should create a high quality disk.
Good luck.
Russ -
What is the best way to clean up your mac and make it faster and run to an optimum level?
Hi Everyone, Hope all is well
Iv been running my mac pro for a long time now, its a Mac pro, 2x 2.26 GHz Quad Core Intel Xeon. 12 GB 1066 MHz DDR3 Ram
Over time now it has become slower, at the moment its still running fine but im sure over time it has probabally collected unwanted data etc. i just dont want it to become a problem as its only going to be used more and more... i now notice that some of the regular programs which i open do take a little while longer to open and i sometimes see that little round Mac loading the sign (the round multicolor wheel).., is there a way to clean the mac up? so that it can run more smoothly and just a better over all feel.,,, the machine is still running beautifully but its time i give it more care and revive it a little more..
What are the best ways to do this, i dont trust any of these non apple based products which claim they can clean ur Mac etc.
Any solutaion and advice that u guys can give would be great and i would be very thankful
Thanks in advanceFor immediate speed improvements, upgrade to a Solid State Drive and upgrade your conventional hard drives to new ones, because the newer ones are faster at reading and writing than the ones from 5 years ago.
By Re-installing your OS onto a solid state drive, the system will boot much faster, and your programs will launch much faster.
I use a small SSD (only 60GB) which contains only OS X and all my apps. All of my personal files are on the large mechanical hard drive. If you still use the drive that shipped with the Mac, then it might be a good idea to replace it.
Depending on what kind of work you do, then additional RAM will help. Swapping CPUs should only be done if you are really in need of the improvements they would bring.
You appear to have the 2009 dual-CPU Mac Pro, which is the most challenging model to swap CPUs into. -
The main reason i bought a Mac was to edit and burn my own videos. I now find i cant burn any of my videos to DVD, What am I supposed to do?
Why can't you do this? There's plenty of third-party software that can do the job. Download a few from
MacUpdate or CNET Downloads and try them out before choosing one to purchase. -
I've been using a flip video camera since 2009 and all of my videos are in the flipshare library. What is the best way to burn all these videos to a DVD that will play on my DVD player/tv? The flipshare library is taking up too much space on my Macbook and I wanted to delete these videos once they were all tranferred to DVDs.
Any help is greatly appreciated.Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever. -
What is the best way to copy a DVD I made from iMovie? It was HD720 and I don't want to lose any quality in the copies. I need to distribute it to about 20 people. It's 42 minutes long.
You will need to save it as a video to the camera roll.
Import it into windows as you would a photo.
Then purchase DVD authoring software, and create a DVD. -
What is the best way to back-up my Hi-8 video tapes and then load them onto my i-Mac so I can edit them on i-movie? A camera store will convert them to DVD for $32/120min. Will I lose a lot of quality that way?
Quality is not much of an issue with Hi8, the main issue is age of the tapes. The older the tapes, the more degraded the images are going to be. Regardless of how you transfer the video, the quality is going to be pretty much the same.
The "best" way depends on how valuable the images are to you and how many tapes you have. I did a similar project last winter with a collection of 14 Hi8 tapes that dated from 1994 to 2002. I bought a converter bridge (Canopus), maximum RAM for my Mac, and a huge hard drive. I also decided to get Final Cut Express because it had more ability to enhance the pictures after downloading them. I am very happy with the results, but it cost me nearly $1200 for the upgrades, equipment, and software.
The only other thing to consider is to be sure that if you go with an outside vendor (like the Camera Store) that the files they provide for you will be in a format that iMovie can recognize.
Good luck. -
I finally was successful in burning a CD of a slideshow I created in iPhoto, however, it is blurry. What is the best way to burn to a CD or DVD for clarity. Also, I realize if burned in iPhoto it will only be playable in iPhoto. Help! This is needed soon for a wedding reception!
What version of iPhoto are you using? How do you plan to view the slideshow at the wedding reception, on a TV screen? If so then you will need to send the slideshow to iDVD and burn a disk from there.
If you're in iPhoto 11 and the slideshow was created in the slideshow mode and not from an album, then go to the Share menu and select iDVD. That will create a QT movie of the slideshow and import it into iDVD.
In iDVD select your theme and setup the menu as you'd like. If you want the movie to begin plahying immediately when the disk is inserted into the DVD player go into the Gallery mode and drag the movie into the Autostart bin at the left.
Click to view full size
If you want the movie to loop continuously go to the Advanced menu and select Loop.
Click to view full size
When you're finished setting upb the iDVD project save it as a disk image via the File ➙ Save as Disk Image menu option. This will allow you to check it with DVD Player before tryingto burn to disk. Mount the disk imnage by double clicking on it and launch DVD Player and play. If the movie plays as you want and everything is good you can burn to disk with Disk Utility at the slowest speed available to assure the best burn quality. Always use top quality media: Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT -
What is the best way to Burn a DVD Movie
What is the best way to Burn a DVD Movie, do I need a specific program?
pamelafrommelbourne wrote:
What is the best way to Burn a DVD Movie, do I need a specific program?
If you're trying to copy a commercial movie and burn it to disc, then it is expressly against the Terms of Use of this community to describe any method to illegally copy or circumvent copy protection DVD's
If you've made a movie and want to author a DVD, then you should use iDVD, Toast or, if you're really skilled, Final Cut Pro X.
If you just want to move a movie to a DVD, which probably won't play on a DVD player, then just insert a blank DVD, and move it over from the finder. Click burn.
Maybe you are looking for
-
SteelSeries Siberia V2 MSI Dragoon Army Edition - Member Unboxing and Review
Hello guys, So I finally received the SteelSeries Siberia V2 MSI Dragoon Army Edition I won from the forum event. I did some unboxing photos and a short review as well. Hope you guys like it. Front of the box. It is totally different from the ordinar
-
Viewing quicktime video in my website
I created a website and inserted a QuickTime vide in it. I can view it on my PC, but when I go to my website on my i-pad, just a black square with and symbol shows up. Can anyone help me?
-
Getting Class instance of a class
Dear Friends, I need to get Class instance of a class in my project. Inorder to use the reflection API 's the package name of the class is needed , but it may not be available Only available thing is the name of the class file and the location where
-
Hi, has anyone done an example where you are at a page, say Page1.jsp that has a text box and a button, when you click on the button a javascript popup window must open(Page2.jsp). Page2.jsp has a text box and a button. The user will enter a value in
-
I configured an iMac in a Windows based environment as far as networking goes. The individuals who will be using the system are configured as non-administrators on the system. The problem arises when they are trying to open an InDesign CS2 file. They