Want to reduce bass in an audio track.

It seems like Audacity cannot do that. Is there another free and quality application I can use instead?

In iMovie, they are called Beat Markers. If you search for Beat Markers in the Help you should find it.
Also check out [this Tutorial by Ken Stone|http://www.kenstone.net/fcphomepage/imovie_09stone.html#markers]

Similar Messages

How Do I Reduce Window Size/Find Audio Track

I am using Elements 4.0 and it works fine except for two issues. When I launch the software, the windows are larger than my monitor screen and I have to drag the windows around to see and access the buttons for the features. I have a 17" monitor and have it set to the highest quality (32 bit, which is 800 x 600 pixels). If I reduce the quality, this will probably interfere with editing color in the images.
Secondly, in the Help section under audio it shows an audio bar under the thumbnails and says you can drag the audio bar to designate where to start music. I cannot find the window that displays the audio bar. It's not in the Organizer for slide shows. Can anyone help?
Thanks ...

Thanks. I tried that and it worked. I can now see the entire windows on my monitor screen. And the audio track now shows up in the edit window below the images. It's now possible to right click on the tracks, delete the ones I'm not satisfied with and add new ones.
However, for others out there, the change in screen resolution reduced my desktop and other windows that I open in other programs and makes it difficult for this 66 year old man to see. So I have to toggle back and forth, in between using Elements 4.0 and other programs. But that's no big deal ... just another hoop to jump through.
Thanks for the tip.
Allen

FCP 4.5 Sequence w/ No Audio Tracks

How can I create a sequence with no audio tracks? When I try to delete the audio tracks, I get an error message saying "Deleting all tracks is not permited."
Any help? Thanks

I'm getting the feeling that people are confused with what my goal is. In the timeline window, I want there to be NO audio tracks.< </div>
I understand. You're not grasping the answer.
How can I create a sequence with no audio tracks? When I try to delete the audio tracks, I get an error message saying "Deleting all tracks is not permited."< </div>
Instead of saying A1, A2, etc, there would be NOTHING. < </div>
You can't. Period. You can reduce the number of audio tracks to one but no fewer. You can create a preset, a default empty sequence, to open with only one audio track. But you cannot delete all audio tracks. Can't be done.
bogiesan

How to play multiple audio tracks simultaneously?

Hi there,
I am having problem with playing multiple audio tracks. I want to play 2 or more audio tracks at exact time (without delay) - is it possible? how can it be done?

So, essentially, you're trying to take a recording of say, a singer and a guitar player, and end up with the singer in one file and the guitar in the other. Got it.
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/Merge.html]
That sample will merge multiple input files into a single file. Because you want to play the files together rather than save them, just take the sample and strip out all of the DataSink stuff, and add the following line right after the Processor "outputProcessor" is realized...
outputProcessor.setContentDescriptor(null);
So, it'll make the following revision to the code:
     // Create the output processor
     ProcessorModel outputPM = new MyPMOut(merger);
     try {
         outputProcessor = Manager.createRealizedProcessor(outputPM);
                    outputProcessor.setContentDescriptor(null);
         outputDataSource = outputProcessor.getDataOutput();
     } catch (Exception exc) {
         System.err.println("Failed to create output processor: " + exc);
         System.exit(-1);
     }That'll make the outputProcessor play the file, as if it was a Player object. You won't have any visual controls, but if you need visual controls, then don't do that, and just create a Player object to play the outputDataSource.

Audio selection in Cs5.5 Encore auto plays rather then just changes audio track

I am an Encore newbie after moving from DVD SP to Encore for blu ray menu authoring. Ive read and re-read the help files and they seem to be the same for Encore versions going back to at least cs3 for this issue ... so i must be doing something wrong or Encore just cannot do a very basic thing...
I am building a blu-ray with a singel video track and 2 audio tracks. I am trying to link a menu to allow a user to select a 5.1 or 2ch version of audio for a feature film. All shoudl be straightforward. i have a menu with several buttons. Each button links to an audio track in my timeline.
However, when i test my links, instead of just changing the audio and returning to the menu (as per the instructions in the help files ), the film plays from the beginning.
The correct audio track is played, but that is not my intention at that point. I want the user to choose the audio track and then allow the user to press another play button or go to another menu and back again before the film starts.
So how do i just change the audio track but not play it there and then ?
The help says use 'specify link' so i choose that option and select the timeline, yes, select the audio track 1 or 2, yes. But there is no different way to do this if i actually wanted to play the track at that time as well. What is the fundemental bit i am missing here ? Something to do with button type or some werid overide setting i am missing ? Can Encore actually do this ? its rather frustrating having come from using DVD SP which allows you to script everything and set gprm/sprm registers, to a program that does not seem to allow you to do anything beyond very very basic authoring.
Any help would be appreciated. thanks.
mark

maniac101maniac wrote:
However, when i test my links, instead of just changing the audio and returning to the menu (as per the instructions in the help files ), the film plays from the beginning.
The correct audio track is played, but that is not my intention at that point. I want the user to choose the audio track and then allow the user to press another play button or go to another menu and back again before the film starts.
To return to menu after changing the audio or any subtitle track, you should select the desired menu in the Specify Link option and change the audio and subtitle accordingly.
In the example above, what I have done is, I went to the Specify Link, chose the menu as the target and also changed the audio track there and clicked OK
So here, after pressing Button 3 (Item 3), I would return to the menu and my aduio would be reset to audio track 2.
After that, whatever timeline I play, that would be played with audio track 2.
That is just a small example to show how it is done. Set the navigation as you like.

Putting a single audio track on iphone

I want to occasionally put a single audio track on my iphone from my Windows 7 PC.
The original format will probably be mp3. (In some cases it might be wma.)
I want to be able to select a single track and convert it to whatever's easiest to allow me to put it on my iphone. Please note I don't use itunes for audio/music.
Can I do this without itunes? In any case, looking for specific steps as I'm only familiar with using Windows Media Player with an mp3 player.

Odd, tried to edit original post, but when I clicked save, it failed.
I think I found the answer... have to use itunes, apparently there's a way to browse to a single file and import just that one then have to sync it with the iphone somehow.
If that's wrong I welcome corrections. Thanks.

Bugged audio playback? When I start working with more than 1 audio track.

Hi!
I have been using premiere elements 12 for editing FullHD videos.
Brand new for me just bought it like 2 weeks ago.
Now during the last couple weeks I have had this MAJOR proglem with editing the audio.
This problem is headache and turns my simple editing into almost impossibilites.
I have had this problem with all my projects. _ALL_
Usually the problem seems to appear when I want to start working with several audio tracks.
At somepoint my projects just get ruined, I simply cannot hear the audio tracks.
The audio starts to disapear randomly from all the audio tracks.
It is not only playback problem. When I exported the video, the audio was partly missing, same as the project.
I have tried to look help on forums and search all what I could find, but havent been able to solve this.
Small fix has slightly helped:
I export audio to single track and bring it back to project. This works but I still usually have more editing to do.
I simply cannot understand why the playback disapears, I fear it is a bug.
I found lot of earlier version problems on people with similar type of problems, but no help for this version of program.
To solve the matter I have changed my audio setting in PE12.
Tried Premiere Elements WDM Sound and ASIO4ALL V2, but same problem on both.
I have looked up that my audio playback device and PE12 matches, and are not muted, and volumes maxed.
I have deleted my C:\ appdata\roaming\adobe premiere elements & premiere elements 12 folder preferences.. not helping..
I press the update pretty much everyday hoping for new version.. But yes, program keeps telling me its the latest.
I usually only work with 3 audio track maxinum. And I am doing really the most basic stuff here..
I have set all my audios to foreground and it has given me best results, but it does not seem to take the problem away as at somepoint randomly my audio playback is missing again, randomly across the playback.
Please anyone? I am feeling hopeless here.
Info on my computer:
Operating system: Win7
Processor: AMD Phenom(tm) x4 955 processor 3.20 GHz
memory (RAM): 4GB
system: 64bit
<moved from downloading, installing, setting up forum by mod- kglad>
Message was edited by: kglad

First of all, thank you for replying my message!
I will go and try to answer best I can.
Source media properties:
Progressive frame rate, I record this from a game.
Recording program: dxtory
codec: Lagarith Lossless codec
Format: avi
Frame width: 1920
Frame height: 1080
Data rate: 1990656kbps
total bit rate 1992192kbps
Frame rate 30/frames/seccond
Audio of video properties:
Codec: PCM
Format: 16bit, stereo
Bit rate: 1536kbps
Channels: 2(stereo)
Audio sample rate 48 kHz
In addition to that I use wav files for music and narrate
Music files sizes 20-50mb
bit rate: ~1411kbps
In total sizes of audio involved is usually something like 300mb
What are you or the program setting as the project preset in the new project dialog. See Edit Menu/Project Settings/General and its Editing Mode, Timebase, and Frame Size readings.
I opened new project and this is what i got:
Editing mode: HD 1080i
Timebase: 25,00 frames/second
Frame size: 1920 x1080
Audio is 48000 Hz
(I dont know how to change these, btw. Program don't seem to let me change editing mode.
I also looked up my most recent project and found these settings:
Editing Mode: DSLR
Timebase: 30,00 frames/second
Frame size: 1920 x1080
..and same audio settings
Do the problems persist if you start a new project? Do you find the audio problems develop when the Timeline content is fairly well developed or can the problems occur when there a minimal amount of content of those tracks? Let us look at the size and duration of this project.
Yes, I have had this problem with all my projects. Sometimes it goes away tho, just enough for me to work bit more. My work progress usually starts by clipping the video material, like 1h material to 8minutes in clips. After that I want to work with audio tracks, and here problems start! When I start working with more than 1 track, so the problem is at later stage. To fix the problem a small fix I have used, I export audio like music and effects tracks together to 1 wav and bring it back. After that, I start working with narrate track. To describe the problem with audio:
Audio Randomly starts to disapear when I playback, and can also be gone if I export the video out.
My source videos total size are usually within 80Gb max limit and audio edit material 300mb total.
In my last project my biggest source video was 47GB and leingth of 1h 4m, in addition to that I had 3 smaller videos, sizes of 1GB, 1,54GB and 300MB.
Is there any evidence that you are accidentially moving the audio track rubberband to alter the audio volume. That rubberband is the orange line that runs horizontally through the middle of the audio clip when you are looking at the wave form display style of that audio track. The rubberband represents audio volume.
No, audio volumes might have been adjusted in my tracks but they are present. The problem is usually like ~2-5seconds, a random audio track can be heard (like music or narrate) or just no sounds at all. This makes it very difficult to work with the audio. Also I gotta say that this problem starts by simply having the 2-3 audio tracks.. In my recent project the only adjustment I used to edit the audio was fade in/out.
I don't have any other audio problems with any other programs.
I am more than happy to provide more information if needed. I hope this information helps.
In addition I can say that when I close Adobe Premiere Elements 12, it crashes. No idea why.
I have also looked up my firewall settings, anything involved adobe and premiere..
In addition some effects like HD text templates make "Adobe Media Core CS6" crash. I tend to just not use em, or if I need em, I add em at end of the edits.
I hope this helps, I would really like to solve this problem.
Thank you alot for taking the time to answer! I welcome anyone to help mee too! Please giev links to similar problems too. Thank you everybody!

Cam I add more than two audio tracks in a clip in iMovie 11?

I want to add more than two audio tracks in a clip, is it possible. I'm using iMovie 11.

You, you can add several.
Good Tutorial Here

DVD pro 2 - commentary audio / track

Hi all.
I want to add a directors commentary audio track to my DVD 2 project.
I have read the book and bought the T-shirt, but can't see how to add a second audio track and give viewers the option to select audio track 2 as opposed to the one exported with the video.
Any clues?
Cheers.

http://www.geocities.com/mypix013/MINMOVIE.zip
Small project and may be all you need. Basically the menu says play the 160 APAC audio or the 256 APAC Audio (BTW both audio has no sound, sorry)
If you press 160 A1 is played, and if 256 A2 is played.
The track has two markers (1 and 2) and has two stories (160 and 256). For the rest open inspector to see what is going on. First press F3 key to set to advanced layout (in the event it does not open like that)
Then click on the 160Stream story, you will see that it has one chapter in it. When you play the story it wwill play until the next chapter (which is 2 and which is NOT in the story. Only include the markers for the parts you want to play)
Then look in the inspector for the story under the general Tab, you will see that Audio Stream 1 is checked and alll others are not for 160, and for 256 Audio Stream 2 is checked, and the others are not.
You can look in the Simulator and see the audio stream in SPRM 2, or (probably better) just bring two different audio files into the tracks so you can here the difference
Let me know if you want some more details or you need something more than this

How to delete the left channel only in the audio track

Hello All,
I have put some video in the timeline that was recorded with a camcorder that only had mono sound. What I want to do is delete the audio track that has no sound, duplicate the audio track that has sound so that there are two audio tracks.
Now I've tried several different ways to do this, but it seems that FCE will only let me delete both audio tracks. How do I just delete one audio track and leave the other one intact?
Thanks for your help.
Mike

Select the audio. Then select Modify>Stereo Pair. You can then select the empty track to delete it. Then double click the remaining track to load it into the Viewer and set the Pan control in the Viewer window to 0.

Locking video clip to audio track?

I have a bunch of video clips in my sequence. A couple of the clips I want at certain points of the audio track and I dont want them to move but when I ripple delete video clips in fron of them it shifts the clips back (moving them away from the specific spot on the audio track). Is there a way to lock a video clip to a certain part of the audio?
I tried "grouping" the video clip and the audio but that doesn't seem to work as the video clips still move.

You can't lock a clip, only a track. Move the desired clips to a higher track and lock that.

Replacing the whole audio track to a clip

I had a long clip of a one long concert shot, i have it in a viewer now and what I want is to replace the whole audio track before to import it in the project and or creating subclips or putting keywords, can I do it?

alidav wrote:
well i imported the new audio track and have synced to the video one and in the new syincronized clip i deactivated the original audio, is this what you would do?
Yes

2nd Audio track from merged .m4v files does not play on iPod Touch

I used Handbrake to encode two .m4v files of a concert DVD that spans two DVDs. I then took those two files and combined them into Quicktime Pro to create a single .m4v file. The file plays fine in QT but when I transfer the file to my ipod, only the first audio track (from the first file) plays. Once the video from the second file plays, the audio is silent. Here's what the movie properties look like:
Enabled Name Start Time Duration Format
====================================================
Y Video Track -- 0:00:00:00 -- 2:21:53:90 -- H.264
Y Audio Track1 -- 0:00:00:00 -- 2:21:53:90 -- AAC
Y Audio Track2 -- 1:27:28:87 -- 0:54:24:02 -- AAC
N Text Track -- 0:00:00:00 -- 2:21:53:90 -- Text
Any suggestions?
Thanks,
Dan

So basically, anytime I combine more than one mp4 file in QT7 Pro, it will always create multiple audio tracks when doing a simple "save as" (vs. export as)
Not exactly. QT has it own set of rules. As you noted, the video track had no problem merging into a single track. This would not have happened if you had merged video compressed differently or added an image/stretched image sequence. Not knowing your specific work flow or settings, I hesitate to make any claims here. Frankly, when merging audio, I normally prefer to use GarageBand when I want to create a single master audio track and still retain control of the other tracks for mixing purposes. However, I could just as well have exported the audio in the original file using QT Pro to a single audio file and used that audio track to replace both original tracks keeping both the original video and chapter tracks. It is all a matter of which work flow you consider easiest for a particular job or project.
If I've exported out my chapter file as a plain text file, how do I go about reintegrating that withing the final mp4 file using QT?
http://www.apple.com/quicktime/tutorials/chaptertracks.html
The above link is a somewhat old tutorial explaining how to create a chapter text track from scratch. Since you already have the chapter track, just refer to the steps indicating how to add the text file back to your main movie file. (Ignore the step that says to set a "Preload" option as this pop-up has been removed.)

I want to make a copy of slide show create from my own photographs and with a an audio track behind them. I have carefully followed the iDVD tutorials and burnt the result to a disc but image quality is very poor. What is wrong?

I want to make a DVD of a slide-show with an audio track behind the photographs. I have carefully followed the iDVD video tutorials but the result is far from satisfactory. The quality of the images on the resulting DVD are blurred and indistict although the original photographs are of a very high quality. Where am I going wrong? Would I have better results from a different program than the inbuilt iDVD and if so so what programs have others found to be better? I should be grateful for some expert guidance.

Hey Falcopebo,
Thanks for using Apple Support Communities.
Looks like you have image quality issues when using iDVD to burn.
iDVD 7.0: Burned DVD has interlacing, pixelation, or image quality issues
http://support.apple.com/kb/ht4078
A standard DVD made by iDVD is made to the standard DVD resolution of 720 X 480, which is smaller than most HDTVs and monitors. When expanded to fit the entire screen or monitor, the image will distort slightly due to upscaling to fit the screen or monitor.
Have a nice day,
Mario

Why I have to mute Audio Voice Recording Track always in order to subdue the voice recorded when I want to solo other tracks, audio or midi for listening.The other audio tracks don't sound without being muted. Please advise how to deal with this .Thanks

Why I have to mute the Audio Voice recording track ( the first voice track ) always in order to sudue its recorded sound while I want to listen to other
tracks ( either audio or midi tracks ) in solo ?The other audio tracks with voice recording do not have to be muted in order not to interfere with other
tracks turned on solo. Can someone kindly explain this phenomenon and any way to fix this ?
Thanks
Dan

Thanks, ATR,
I wll try this--but I still am unclear on how to do what the Manual says is possible: select clips on another track that WILL be moved, if I so desire, so as to remain synched to the main Video track.
UPDATE:
In the case of inserting Freeze Frame, I just tried both Ctrl method and Alt method, and neither worked.
1. Put Video on Vid1 track
2. Put Music on Sound Track
3. Ran a few seconds of Vid
4. Stopped Vid, selected Freeze Frame
5. Held down Ctrl key while clicking "Insert in Movie" also tried with holding down Alt key.
Result: a 3 second still was inserted int the Vid1 track. A corresponding gap was created in the Sound Track.
6. Slid the final part of the Sound Track to the left along the timeline to re-connect it to the next segment created by the above process.
Result: the video following the final Freeze Frame was pushed to the right end of Video1 track.
7. Slid the Sound Track all the way to the left.
Result: the entire Video 1 Track contents were pushed to the right and divided in pieces.
I documented each step with screen shots which I can send if you want them and if I can figure out how to do it.
UPDATE #2
In the case of inserting a video clip to the Timeline, I just tried both Ctrl method and Alt method, and neither worked.
1. Locate video in Project Assets
2a. R click video in Project Assets (pull-down menu appears), hold down Ctrl, click Insert to Timeline.
Result: Vid clip is inserted on Video 1 track, Sound Track is separated with a corresponding gap.
2b. R click video in Project Assets (pull-down menu appears), push Alt
Result: pull-down menu disappears as soon as Alt is pushed down.
I can stil drag the Vid clip but it's one more manual step...I love shortcuts!!

Want to reduce bass in an audio track.

Similar Messages

Maybe you are looking for