Want to register ical and other iLife software

Hi,
I hope this isn't too dumb of a question. I wanted to register ical that came pre-installed on my iBook G4 computer (as well as Garage Band, etc.), but when I went to do so, I couldn't find the part number that apple's web site would accept. I tried the computer's serial number, the number on the label that the instruction manual came in (along with the software coupons that are supposedly proof of purchase), and the number that popped up in the "About ical" box. What am I missing?
Thanks, Anna

anna,
I also thought it had to be registered because in the Ical menu there's an option "Register Ical."
I can see why you thought that it needed to be registered. The registration menu has been removed from more recent versions of iCal.
Since iLife '06 was pre-installed, Software Updates will not be inhibited nor will registration be required.
;~)

Similar Messages

I had to re-install OS X recently and lost iPhoto and other ilife apps. Do I have to buy them now?, I had to re-install OS X recently and lost iPhoto and other ilife apps. Do I have to buy them now?

I had to re-install OS X recently and lost iPhoto and other ilife apps. Do I have to buy them now?, I had to re-install OS X recently and lost iPhoto and other ilife apps. Do I have to buy them now?

Welcome to Apple Support Communities
This is normal. OS X doesn't come with iLife apps, so you have to reinstall them after reinstalling Mac OS X.
If your Mac came without DVDs or you purchased it after July 2011, you have to install the iLife applications from the Mac App Store. Open the Mac App Store, log in with your Apple ID, go to Purchases and download GarageBand, iMovie and iPhoto free of charge.
If your Mac came with DVDs and you didn't purchase the iLife apps in the Mac App Store, insert the Applications DVD and install the iLife apps. Then, open  > Software Update, and install the latest iLife applications version

Im going to buy a macbook pro 13" 1199$ Is Logic Pro Good On Him? And Other Apple Software

im going to buy a macbook pro 13" 1199$ Is Logic Pro Good On Him? And Other Apple Software
Like iWeb, iMovie, And Staffs Like That?

As a hobbyist dual core Macbook Pro 13-1nch will do fine.
For professional work, you are better off with Macbook Pro 15-inch quad core i7..
iWeb is no more available from Apple. You may have to check Amzon for it.

I can't update my iPad to iOS7. It keeps saying that my updates are complete at iOS 5.1. HELP. I want to download iBooks and other apps that need iOS7.

I can't update my iPad to iOS7 . It keeps saying My updates are complete at iOS5 .1 . HELP!! I want to download iBooks and other apps that need the newer iOS7 .

The original iPad can't be updated past 5.1.1; you may be able to get compatible application versions by downloading them to a computer and then going to the Purchased screen on the device.
(100498)

What does apple plan to do for the people with 2nd gen ipod touch who want to have facebook and other apps now only compatible with ios 5?

what does apple plan to do for the people with 2nd gen ipod touch who want to have facebook and other apps now only compatible with ios 5?

poobs wrote:
what does apple plan to do for the people with 2nd gen ipod touch who want to have facebook and other apps now only compatible with ios 5?
Nothing. The 2nd Gen Touch is OBSOLETE and is WAY past its support life. If you want to run the newer apps you have to buy a newer iPod.

Quicktime and Other Apple Software Close Unexpectedly

After installing Quicktime 7.1.6 my whole computer started messing up. Every time I try to open Quicktime it unexpectedly closes before it gets a chance to open. This also happens with Itunes and Other Apple Software, even system preferences closes unexpectedly. However I can open and run photoshop with absolutely no problems. Is there a way to revert to 7.1.5 or a way to restore the operating system to a date before I installed the new version of Quicktime? I know you can do that on windows operating system.
thanks
powermac g5 Mac OS X (10.4.9)

I discuss by eMail with a developper of Graphic Converter and he confirm this problem
Really?
The latest version of GraphicConverter (5.9.5) runs perfectly with OS 10.4.9 and QT 7.1.6.
Not that GraphicConverter has anything to do with video.
It's a Quicktime crashes with .AVI corrupted files..
'AVI' can be many things. It is not a codec but a container, and if a file is corrupted you can't blame Quicktime for not opening it!
Try doing a bit of maintenance on your computers, guys.

Just bought a Macbook air. Isn't it supposed to come loaded with Numbers, Pages and other basic software?

Just bought a MacBook Air. Isn't is supposed to come loaded with Numbers, Pages and other basic software? I can't find these. Can anyone help?

It comes with iPhoto, iMovie and GarageBand, but not with Pages, Numbers and Keynote. You have to download them from the Mac App Store.
Open the Mac App Store, go to Purchases and accept all these apps, so they will be downloaded and installed free of charge.
If you cannot download them, see > http://www.apple.com/creativity-apps/mac/up-to-date/

IPhoto and other iLife Apps not working

About a month ago I was having serious problems with my iMac. Ended up needing a new hard drive, so Apple sent it away, put in a new hard drive, and sent it back. I've had it for two weeks and am just now using some applications (probably should have checked everything when I got it back, oh well), and some iLife stuff and programs that come installed are not opening. I am running Mac OS X 10.4.11 FYI
What works: Mail, Safari, iChat, Address Book, Itunes, iMovie, iCal, Quicktime
What doesn't work: iPhoto, iDVD, Garageband, iWeb, Photo Booth
Just a note, iWeb is the only one that prompts me and tells me that I need to re-install iLife. When I went to download latest iLife update it told me there was nothing to update and I needed to reinstall iLife.
Also just went into the applications folder again and realized I have both Spaces and Time Machine installed, except they do not work with my OS, so I don't know why they are on there (when I try opening them just to see what would happen it says "does not work with your OS X). Also, Senuti and iPodRip also are not working, so anyone have any ideas as to programs that would let me get my music off my ipod and back on to the computer?
The programs that don't work just bounce out of dock once then go back down immediately, and do not open at all. I tried installing the software bundle package from my OS X install disk but while the install was seemingly successful it did not change anything. So AAGGHH what do I do???
Thanks in advance!

I have the Core 2 Duo in the white case, released late 2006. Definitely have been running Tiger on it (just checked and I am running 10.4.11), sent it away, got it back, and just noticed that these programs don't work and I have programs native to Leopard inexplicably on the computer for some reason. I don't really want to remove them though cause I would like to have them on in case I have to go to the Apple Store so I can point it out to them and ask some questions about why Tiger (the OS installed on the computer) applications are not working while Leopard applications are installed even though they don't work and shouldn't be on there.

How can I check for keylogger and other malicious software on a used Mac

I purchased a used iMAC (Late 2012 21.5") and it has OSX 10.9.4.
How can I ensure that it is clean and doesn't have any password or key logging or other malicious software installed in it ?
I basically want to ensure I have a clean iMac at the start and not have to worry about security.
Thanks

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received those media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

I have set up ical and address book on my mac. We have 2 separate mail accounts but want to sync ical and addresses to both phones can i do this

I have set up ical and address book on my mac
We have 2 gmail addresses and 2 icloud accounts
I would like to share the ical and address book between the 2 phones
is that possible - any help gratefully rec'd !!

He needs to add your Apple ID in settings > mail, contacts, calendars (as a secondary iCloud account), then check contacts and calendars from the options available.
Note, he would be able to enable mail, reminders etc as well at will. should he wish to do so. If you are OK with that, it should all work as you want it to.

Bugs with Lion! Cannot delete events in iCal and other stuff...

First, sorry for my English, I speak French...
I installed Lion on my MacBook Pro, my iMac and on my girlfriend's MacBook Pro and I have the same problems on each computer! Help please!
I try to delete an event on iCal and it always comes back!! I cannot delete it and I cannot delete an entire calendar too! It disappears and 10 seconds later, it's back!
I also removed an icon from the Dock but when I restart the computer, it is back in the dock!
I have also some issues with the file sharing between my Macs. Usually, I entered the username and password of the Mac and it was possible to access everything from another Mac. But now it doesn't work! I think that I must create a new user account for file sharing...
What should I do??
Thanks!!!

I have the same issues with items "re-appearing" in the dock after reboot or waking from sleep. I went into recovery mode, wiped my hard drive, and cleanly reinstalled lion to no avail. I had other issues that cleared up, but my dock is full of apps I never use...so I can only conclude its a bug.

How to identify the required version of SAPINST and other SAP software?

I have a dell poweredge machine with quad processor .
On this we installed win 2k3 std x86
when I go to my computer and properties, it shows me intel processor, and win 2k3 x86_64
Then I download the IA64 verison and X86 versions of PI71 and related Oracle software.
I tried installing Oracle 10g IA64 and it showed me an error message
Then i installed I386 Oracle 10g and it installed successfully.
While installing Pi71 software, it started promptint me that Oracle software is not found.
So after a couple of hours of struggle and research< i installed AMD64 Oracle 10G and this got recognized by the PI71 software.
My questionw rt the abvoe is - when my computer says it has x86_64 version of OS on an intel xeon processor, how did the AMD64 got into picture?
So how to correctly identify which version of SAP software to download?
Please advise - I am novice regarding OS and related issues...
Thank,
Ven

IA64bit means Intel Itenium Processor.
AMD64=(X64bit) means Intel Core 2 Duo
This X64bit technologies invented by AMD so its called AMD64.
Regards,
Nikunj Thaker

Turning off Firewall's allows for VPN, iCal and other services to work.

Hello All,
Today I decided to spend the day playing around with our new Mac Leopard Server on the bench. Here is what I found today and I was hoping someone might have some insight. We setup our MacPro with one NIC to ISP via static IP and the other to our switch running the LAN. Our DNS is setup so that apple.ourdomain.com points to the static NIC. And on the inside it's running the standard 192.168.1.1/24 for the LAN. Well all services seem to be running and setup fine today but after setting up one test MacBook Pro and then connecting to dialup outside our LAN/WAN we could not gain access to iCal (kept telling us network connection failed) or to VPN. But after about an hour of playing with the Standard config I found that if I disable the firewall in server admin and server prefs then I can VPN in via PPTP and L2TP as well as connect to iCal and to the Wiki/Webservices.
I had been trying for an hour and watching the logs for all services to find a failure as to why this remote workstation could not gain access to services inside but now I know for sure it's the built in firewall. Has anyone else seen this and do any of you regulars have any suggestions? I can put a Cisco PIX in front of the MacPro but the built in IP Chains firewall that I have disabled to give me remote services should be more than suffice to protect my calendar. I mean it's not like I am hiding the cure for cancer here...
DM

Here is the current output.
00001 allow udp from any 626 to any dst-port 626
00010 divert 8668 ip from any to any via en0
01000 allow ip from any to any via lo0
01010 deny ip from any to 127.0.0.0/8
01020 deny ip from 224.0.0.0/4 to any in
01030 deny tcp from any to 224.0.0.0/4 in
12300 allow tcp from any to any established
12301 allow tcp from any to any out
12302 allow tcp from any to any dst-port 22
12302 allow udp from any to any dst-port 22
12303 allow udp from any to any out keep-state
12304 allow tcp from any to any dst-port 53 out keep-state
12304 allow udp from any to any dst-port 53 out keep-state
12305 allow udp from any to any in frag
12306 allow tcp from any to any dst-port 311
12307 allow tcp from any to any dst-port 625
12308 allow udp from any to any dst-port 626
12309 allow icmp from any to any icmptypes 8
12310 allow icmp from any to any icmptypes 0
12311 allow igmp from any to any
12312 allow udp from any to any dst-port 1701
12313 allow tcp from any to any dst-port 1723
12314 allow tcp from any to any dst-port 113
12315 allow udp from any to any dst-port 500
12316 allow tcp from any to any dst-port 5190
12316 allow udp from any to any dst-port 5190
12317 allow tcp from any to any dst-port 5222
12318 allow tcp from any to any dst-port 5223
12319 allow tcp from any to any dst-port 5269
12320 allow udp from any to any dst-port 5297,5678
12321 allow tcp from any to any dst-port 5298
12321 allow udp from any to any dst-port 5298
12322 allow gre from any to any
12323 allow ip from 192.168.1.0/24 to any via en1 keep-state
12324 allow udp from any 68 to any dst-port 67 via en1
65534 deny ip from any to any
65535 allow ip from any to any
Devin

Ical and other applications crash/freeze after upgrade to tiger

I upgraded to Tiger over a year ago, and this problem has persisted since then. I haven't had time to fix it, but I really miss ical and the other programs that crash.
This is whats going on:
my ical, mail, ichat and address book freeze upon opening, or open and then crash. None of these programs work. I have tried all of the trouble shooting articles on the website. I have reinstalled tiger (twice) using archive + install.
I have also created a new user account, and i did not experience the problems on that account. So, i know it is my user account. However, I don't know what that means, and I don't know what i can do.
Any and all assistance is greatly appreciated. I can try to post the crash reports (if someone would find them helpful and can tell me how to find them..)
thanks again for any help, I really appreciate it.
Kate

See this other discussion which uses a different phrase / set of keywords ("iCal hangs"):
http://discussions.apple.com/thread.jspa?threadID=545343&tstart=0
(I've been learning that the phrase you use in searching is critical in getting to the issue you are researching—and you can not use a Boolean AND or OR in these searches, so finding out common phrases to use can be a big help.)
G3 Desktop Mac OS X (10.4.7) 70GB Maxtor internal, 1GB Ram, La Cie 120GB Firewire, Iomega 160 USB

Software Update, App Store, Terminal, iCal and other Apple Apps will not open.

Hi,
I've exhausted all my search methods and still haven't fixed this issue. I have been disconnected from the internet for about 5 months up until now while continually using my MacBook Pro (early 2011) daily for work. Problems arose about a month and a half ago when I noticed the terminal would not open. I trashed the corresponding plist files as recommended by other websites and trouble tickets. Still no avail, the affected programs all seem to be original software that came with Mavericks. When I try to open any of them (Software Update..., App Store, Terminal, iCal, iTunes Store) nothing happens. The dock makes a space for the icon and then before anything even bounces it quickly closes the space again. I've tried opening the contents of the applications and running the root program directly.
Possibly other relevant information
Ran Repair Disk Permission on the Macintosh HDFound errors on drive and repaired them
iTunes will open, but the store in unresponsive (White screen)
Ran into issues copying files to Macintosh HD from an external USB driveError example "JX879.MXF is in use" and then it would cancel the copy while nothing else was open
At the same time of these issues my internal iSight camera no longer exists according to the system report
Upgrading to Mac OSX 10.94 Mavericks had no affect.
Reset the System Management ControllerHave a recent history of the computer behaving abnormally slow
Any information anyone could give me would be great. Thank you!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Want to register ical and other iLife software

Similar Messages

Maybe you are looking for