Want to remove a podcast that shows on the ipod itself but doesn't appear in the library under itunes

I have a podcats on my ipod touch that doesn't appear in the podcast library that I want to remove.  Deleting all the podcasts & replacing them with new podcasts doesn't help.  Any ideas?

Hi
Go to the apple.com to download the latest iTunes and ipod updater and install accorindingly, then do a Reset of your iPod i.e. Press "Menu"+"Select" keys. Connect it with your iBook and open iPod updater, hope it will allow you to do a Restore. If failed, then press "Select"+"Play" keys to put your iPod in Disk Mode, connect it back with your iBook, open the iTunes and you will able to see your iPod there. Then open the ipod updater and do a restore. You may need to do a few attempts in order to achieve the solution

Similar Messages

  • I have songs on my iPod Touch that I want to transfer to my music library. I can "see" my songs in the library under the iPod tab, but not in my general music library.

    I have songs on my iPod Touch that I want to transfer to my music library. I can "see" my songs in the library under the iPod tab, but not in my general music library.
    I purchased a new computer and I am trying to find the easiest way to transfer all my files over.
    Thanks,

    martyskidmore wrote:
    I purchased a new computer and I am trying to find the easiest way to transfer all my files over.
    1)  From your OLD computer...
    Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
    Full Details Here  >  http://support.apple.com/kb/HT1751
    2)  If you do not have access to the iTunes Library on your Old computer... or its Backup...
    See these 2 Links...
    Recovering your iTunes library from your iPod or iOS device
    https://discussions.apple.com/docs/DOC-3991
    Syncing to a New Computer...
    https://discussions.apple.com/docs/DOC-3141

  • Why don't I receive iMessages on my iPad when sent to my iPhone?  When I send messages from my iPad, they show up on my iPhone, but doesn't hold true the opposite way?

    Why don't I receive iMessages on my iPad when sent to my iPhone?  When I send messages from my iPad, they show up on my iPhone, but doesn't hold true the opposite way?

    Ok. So I figured out that I can add the email address to my iPhone 4s to receive the iMessages sent/received from my iPad. How do I get the messages on my iPad that were sent to my iPhone?  Is it possible?

  • The new U2 album shows purchased via the itunes store on my windows computer, but doesn't appear in my library

    the new U2 album shows purchased via the itunes store on my windows computer, but doesn't appear in my library

    On your Windows computer, go to the iTunes Store. On the right column of the iTunes Store under QUICK LINKS, you'll see an option called Purchased. Click on that and you'll see all items that are tied to your iTunes Store account. You should see the U2 album there and you can download it from the cloud. You'll now have a copy stored on your Windows computer.

  • FireFox showing 126,000+ K in the Task manager, but doesn't appear

    Hello, today I started FF. After about three minutes, it didn't appear so I double clicked its icon again. It still didn't show.
    I then opened the Task manager, and FF was 126,000+ K. I had to use another browser. I attended a webinar online, and as soon as the webinar ended, FF worked just fine. What could have caused what I experienced? Thanks for any help you can offer.

    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!

  • I am not able to download a charter toolbar it show up as being downloaded but does not appear on the homepage

    I have been trying to download a charter toolbar but it does not show up on the homepage along with the other toolbars. When I go to tools it does appear on the add on tab.

    How can I Add Extra Toolbars?
    https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars?#w_how-can-i-add-extra-toolbars
    Check and tell if its working.

  • HT4796 I can't see where are the folders that I had in my old PC on my new Mac after the migration. Even when I see it on my Mac using the search box, it doesn't appear with the right order of my old PC. I need some help, please.

    I used the Migration utilitie from Lion and eventhough I know the folders are there (with a quick search I find images etc) the proper order is not displayed.

    Migrate your Windows files or system to your Mac
    http://support.apple.com/kb/HT2518

  • Just updated to Maverick and now I cannot open any of my applications on my Airbook.  It shows the program running but no windows appear on the screen.  Help!!!

    Any ideas as to why the applications do not open in a window?

    Is an external display connected and turned off? If not, open Mission Control. Do you see the window(s) in any other spaces?

  • I have an iPod touch and an iPad4. iTunes lets me work with the iPod Touch but won't show me what's on the iPad. Any ideas?

    I have an iPod Touch and an iPad4. iTunes recognises both items and lets me work with the iPod Touch but won't work with the iPad. In fact iTunes does not respond to clicking on anything in the iPad window even though it knows that it's connected. Any ideas?

    Look her and it may give insite on what is missing. Otherwise:
    Apple will exchange your iPod for a refurbished one for $99. Likely not worth it for a your iPod. They do not fix yours.
    Apple - iPod Repair price              
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Repair it yourself if you are up to it
    iPod Touch Repair – iFixit

  • Please help! I'm unable to access content on my iPod Classic while it is connected to iTunes. The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).

    I'm unable to access content on my iPod Classic while it is connected to iTunes.
    The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).
    I can click the tabs Music, Movies etc. but I can't see anywhere to access the files themselves, no music or movies are listed, I only have the option to 'Sync' with the iTunes, which I don't want to do as there is no content on the iTunes!!! 
    I just downloaded the iTunes program.
    Very confused, pleaseee help ...

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • My battery drained. Screen shows battery with red line but doesn't seem to be recharding after 20 min.  Should I wait or do a hard restart? I haven't backedup in ages and don't want to lose pics, contacts etc.

    My battery drained. Pluged in to wall but screen shows battery with red line but doesn't seem to be recharding after 20 min.  Should I wait longer or do a hard restart? I haven't backedup in ages and don't want to lose pics, contacts etc.  Will a hard restart wipe all that out?

    Agree with Richard:
    -Your device needs both the CR and LF. To accomplish this:
    option 1: Concatenate the "end of line" string constant (this is a combination of CR and LF, located in the string pallete) to all your outgoing commands. Make sure in the "Visa configure serial port" the "Termination character enable" flag is false.
    option 2: Concatenate only a CR to your command's strings. Make sure in the "Visa configure serial port" the "Termination character enable" flag is TRUE AND that the termination character is set to 10 (meaning LF) which I think is the default.
    Details can be seen in this link:
    http://digital.ni.com/public.nsf/allkb/862567530005F09C862565BE005AB500
    "Adding Termination Characters to VISA Serial Writes in LabVIEW"
    Interesting would be to configure the serial port to accept not one but two termination characters. The above links refers to the document "Developer Zone Tutorial: Termination Characters in NI-VISA.", where this is supposed to be possible. The document however is 404'ed.
    If someone find a working link please post it.
    Regards

  • I have an iPhone 4s that i have been using and have alot of new contacts, on my itunes i have registered an old iphone that i dont use i want to sync my contacts from the iPhone 4s but i cannot get past the page where it introduces you to your new iPhone

    I have an iPhone 4s that i have been using and have alot of new contacts, on my itunes i have registered an old iphone that i dont use i want to sync my contacts from the iPhone 4s but i cannot get past the page where it introduces you to your new iPhone

    When you see the old number come up in the suggested choices look for a blue arrow to the right of the Contact. Tap the blue arrow and then tap Remove from Recents.

  • HT1918 Please help!!! I cannot update all my free installed programs on my iPhone 4S. I want to remove my credit card info from my Appe ID but there is no none !!!

    Please help!!! I cannot update all my free installed programs on my iPhone 4S. I want to remove my credit card info from my Appe ID but there is no none !!!

    Had you never backed up the phone before? When you saw the iTunes logo and cable, the device was in recovery mode. The data was already lost. The only way to recover from that is to restore the device, which will delete all of your data. You will only be able to restore to your last backup, whenever that was. Sorry this happened, but this highlights the importance of doing regular backups. The backup is the only protection you have against a problem like this.

  • I tried installing an update to QuickTime. An error occurred and it wouldn't install. I tried removing the QuickTime program, but a window appeared telling me that a fatal error  ccurred during installation and I could not remove the program.  Now what?

    I tried installing an update to QuickTime. An error occurred and it wouldn't install. I tried removing the QuickTime program, but a window appeared telling me that a fatal error  ccurred during installation and I could not remove the program.  Now what?

    I tried removing the QuickTime program, but a window appeared telling me that a fatal error  ccurred during installation and I could not remove the program.
    I think we'd better see if some other application (other than QuickTime itself) has dropped old QuickTime componentry in the system files on the PC. (If there's a version mismatch between the old componentry and the "QuickTime proper" componentry, that can create those symptoms.)
    So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view options on the PC.
    1. Open My Computer from the desktop or Start menu.
    2. In the Tools menu, click Folder Options.
    3. Click the View tab.
    4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
    5. Click OK.
    Now in My Computer, open your C drive.
    Open the "Windows" folder.
    Open the "system32" folder.
    What files and/or folders can you see in there with QuickTime in the file/folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out.

    I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out. I am trying to determine what is wrong with the drive.
    I need the data on the drive and it won't show up in Disk Warrior. I have tried different Mac's and different USB cords only to find the same outcome. When selected in Disk Utility the information read as such...
    Disk Description : WD Elements 1023 Media                      Total Capacity : 500.11 GB (500,105,740,288 Bytes)
    Connection Bus : USB                                                               Write Status : Read/Write
    Connection Type : External                                                     S.M.A.R.T. Status : Not Supported
    USB Serial Number : 575837314135304D36373132        Partition Map Scheme : Unformatted
    As the drive shows in Disk Utility there must be some life left in it surely. There is a possibilty that the physical connection between the USB cord and the external drive is damaged but since the drive shows up I believe it's unlikely... before I give it to the pro's is there anything else I can do to diagnose the issue?

    Hello,
    I have just experienced the same thing!
    Although my external drive shows in Disk Utility, it does not show in Finder.
    And the Verify/Repair buttons are also greyed out.
    Also, although the drive is 2TB. DU shows it as having Total Capacity of only 4.14GB! (Which should be the Free Space).
    I was wondering if you solved your problem, & if so, would you share your solution.
    I´m afraid to Erase in case I lose all my Data on the drive.
    Thanks in advance for your reply!

Maybe you are looking for

  • Ref.Cursor Problem - URGENT

    Hi Friends, For my report ( calc.rdf ) , I am passing two input parameters P_Client_ID, P_Plan_ID. In .rdf, I had a ref.cursor for selecting records based on two input parameters values. case1: P_client_ID = 'SRINI' P_Plan_ID = '3232' My report is ge

  • Adobe form references

    Hi all,              I am new to working in ADOBE forms and i dont have any specific material regarding ADOBE Forms. So frnds if anyone having material regarding adobe forms , can they send that to this id [email protected] Thanks, satya

  • Error 952 Database is in Transition

    One of our SQL 2005 database started to give us "Database is in transition...Error 952". We were trying to Take the DB offline when this problem occurred. Restarting SQL service did not help us. We were unable to do anything with this database as we

  • Driver for N9010A for Labview 2011

    I am looking for a driver for Agilent N9010A Spectrum Analyzer for Labview 2011, I see the drivers for 8.6 and 2010 but we need it for 2011. Thanks

  • New version of Pages v. 3.0.2

    Today a new version of Pages came out, version 3.0.2. Software update didn't give much detail: "This update addresses compatibility with Mac OS X." Anyone know what changed?