Want to remove Characterstics Structure on run time ( Query Designer )

Dear Friends,
I have a query where i defined one Characterstics Structure. Its working fine.
When i run the report this structure is comming by default.
If i want to remove means drag and drop this structure like other characterstics and key figures its not working.
How can i achieve this scanrio.
Regards
Naeem

Hi,
i want to put structre in free charachterstics on run time.
It is not possible. You can include only navigational attributes in Free Char section of the Query.
You can have Structures only in Rows and Columns. You can have only two structures per Query.
Regards,
Suman

Similar Messages

HT201250 I run time machine on my iMac using an external hard drive. I just bought a MacBook Pro and want to know if i can run time machine on it using my wireless network on to the iMac external hard drive

I run time machine on my iMac using an external hard drive. I just bought a MacBook Pro and want to know if i can run time machine on it using my wireless network on to the iMac external hard drive

How do I set up Time Machine to a shared drive on another Mac?

BW Statistics - Run time Query

Hi Everyone,
I have run the Run Time Query in Bw Statistics to get information about the time spent by queries on particular infocube (overall time, initialization time, database time etc).
The sample of result is ...
Number of Navigations     : 2170
Mean Overall Time (OLAP)     : 3.5348
Overall Time (OLAP)     Time,        : 7670.592
Initializing the OLAP Processor     Time, : 1180.188
OLAP Processor                     : 4932.409
Time, Read on the Database     : 0.00
Time, Front End                     : 3.746
Time, Authorization Check     : 0.00
Time, Read Texts/Master Data     : 1554.248
Overall Number (OLAP)     : 95587
Records, Selected on Database : 0
Records Transferred from Database      : 0
Cells, Transferred to Front End     : 0
Formatting, Transferred to Front End     : 0
Number, Read Texts                  : 95587
When it says Time, Read on the Database is 0 then where is it getting the information from. Its a transaction query so it should get the data from the cube (does not have any aggregates).
The Master and text Read time is 1554.248 which means it has spent that much time reading master and text data.
Most of the time spent is on OLAP processor. Can any one give me more insight on what a query does in OLAP processor.
Also what does it mean when it says 0 records selected or transferred from database. I mean the query has to get data from somewhere. If not from database (Cube) where is it getting the data from?

Hi
OLAP Memory will be in the Application server usually.
But with the reporting Agent settings you can fill OLAP Cache Per user also or based on the Role also.
Did you test your report with RSRT
Use execute +debug and select BW Statistics optio,.
Check the execution time.
Again Execute and cchek the DB time it will be 0 but the first time it will show you some value.
Now again execute with execute and debug option this time select the option do not use cache , now you can see the difference
DB recs will have values there
REggards
M.A

Query not showing detailed result when run through query Designer or Portal

Hi,
There is one query which not showing detailed result while running through Query Designer or run in Portal.
But strange thing is that it is showing the detailed result when i run it through BeX Analyzer.
While all the other queries don't have this problem in system. All showing the correct detailed result.
If anyone have some idea on this issue plz let me know.
Regards,
Javed
Edited by: Javed Akhtar on Jul 7, 2009 3:59 PM

Hi,
We can do this setting in WAD. Please check the web template and try to remove that setting. When you have hierarchy then we can display only till certain level in portal, this setting is done in web template APIs, but in bex analyzer you can see all the detailed information.
Edited
Go through this thread for some more detailed information
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/7b5f0a95ce12d0e10000000a422035/frameset.htm
Regards,
rik

Total run time query

Hi Gurus,
I need to find out what is the total run time of a query in production. I browsed RSDDSTAT table in se11 but I don't know what is the name of the column to find out total run time. Is it qruntimecategory ? Please advice .
Thanks
Liza

Hi Liza,
Goto ST03N transaction and select the expert mode and under BW system load you can check for the query you want. Here it gives the detailed view of the query. But to do this, the statistics for the cubes should have been enabled. for that, goto RSA1, tools-> BW statistics for the infoprovider and select your infoprovider and save. then run the query and you will see the result in ST03N.
Sriram

Structure copy in BEx query Designer?

I created structure in BEx Query Designer in BI PRD which is our BI production system.
I'd like to copy structure to BI DEV which is our BI development system.
Is is possible?
If you have any solution, tell me about that.
Thanks.

Hi
If you want the object which is there in PRD to DEV system means, the only way is to do transportation. but to do reverse transportation, you should have STMS connection from your PRD to DEV system.
The better way is to create the structure again in DEV system.
If you want to go with reverse transportation, consult your basis person.
Regards,
Venkatesh

How to use a structure at run time....

Hi gurus,
I am confused on how to use the structure in our report..why do we need it...Please help me with that...
Thanks
Cheers:Jim

Or you could simply use a structure in your program to group like fields together. So that you could maybe clear them all at one shot.
For example, say that you have a structure with fields a - z.
data: begin of structure,
        fielda type c,
        fieldb type c,
        fieldc type c,
        fieldz type c,
        end of structure.
So in your program, it is now important for you to clear these fields, if you would have defined them one by one without the structure, you would have to list them all in your CLEAR statement, but instead, since you have them in a structure, you can some say....   CLEAR STRUCTURE.
Regards,
Rich Heilman

I want to connect oracle 10g developer run time forms to oractle data base

Hey,
Would any body want to tell me, how come i can connect oracle dev 10g from its forms with oracle 10g data bases
I am waiting
bye

Try asking this on the Oracle Forms forum:
http://forums.oracle.com/forums/category.jspa?categoryID=19
In any case you need to set-up a sqlnet connection from your client to your server. Use the Network Configuration Utility that comes with the Oracle Forms installation.

IC WebClint - Run time query update 'CL_CRM_QUERYBUSACT_RUN_BTIL'

Hi All,
I m right now using this query class 'CL_CRM_QUERYBUSACT_RUN_BTIL' to get the results in one of the views. Need to change the input parameter from one numeric value to another one in the runtime, where exactly to update this?? Whether to link the Query class with the view/controller class & if it is so where to do it??
Thanks in anticipation,
Rahul Pawar

Hi Rahul,
Instead of copy, you can inherit the class to new z class if the required method is public or protected. Then override the method in your z class.
Before calling your z query class check the search node collection. It should refer to collection of your class.
Check do_init_context method. You can create the object of your new class and add into collection.
Hope this helps you.
Regards,
Swapna

Pass value at run time from one structure to diffrent structure

hi experts.
i m workin on crm domain and faching problem to pass value from one stucture to another . problem is that i want the output in xml file so i need all the values interm of segment.
initialy i have this structure.
DATA: BEGIN OF struc1 occurs 0,
       ST_ORDERADM_H TYPE CRMT_ORDERADM_H_WRKT,
       ST_PRICING    TYPE CRMT_PRICING_WRKT,
       ST_ORGMAN     TYPE CRMT_ORGMAN_WRKT,
       ST_PARTNER    TYPE CRMT_PARTNER_EXTERNAL_WRKT,
      END OF struc1.
and using fm CALL FUNCTION 'CRM_ORDER_READ' i got values on this structure at run time.
MOVE LT_ORDERADM_H to STRUC1-ST_ORDERADM_H.
MOVE LT_ORGMAN      to STRUC1-ST_ORGMAN.
MOVE LT_PARTNER     to STRUC1-ST_PARTNER.
MOVE LT_PRICING     to STRUC1-ST_PRICING.
and after that using
try.
CALL TRANSFORMATION id
    SOURCE data_node = STRUC1
    RESULT XML xmlstring.
    CATCH cx_st_error.
endtry.
CLEAR:   tab_xstring,
         lv_filename,
         lv_path,
         lv_fullpath,
         lv_user_action.
REFRESH: tab_xstring.
lv_bytes = XSTRLEN( xmlstring ).
IF lv_bytes > 0.
lv_xstring = xmlstring.
DO.
    APPEND lv_xstring TO tab_xstring.
    lv_xcnt = XSTRLEN( lv_xstring ).
    IF lv_xcnt > xsize.
      lv_xstring = lv_xstring+xsize.
    ELSE.
      EXIT.
    ENDIF.
ENDDO.
now it convert to xml file .
problem is it gives me value of all field associated with standared structure.
but client requirment is that he want only selected values of given structure.
so i think i make a new structure for given value but i m not able to get values in new structure.
thanks

Hi,
create a structure in se11 with following fields
ST_ORDERADM_H.
ST_ORGMAN.
ST_PARTNER.
ST_PRICING.
for example as STRUCT2.
data : begin of i_struct2 occurs 0.
   include structure struct2.
data : end of i_struct2.
MOVE LT_ORDERADM_H to i_STRUCt2-ST_ORDERADM_H.
MOVE LT_ORGMAN to i_STRUCt2-ST_ORGMAN.
MOVE LT_PARTNER to i_STRUCt2-ST_PARTNER.
MOVE LT_PRICING to i_STRUCt2_PRICING.
then
try.
CALL TRANSFORMATION id
SOURCE data_node = i_STRUCt2
RESULT XML xmlstring.
CATCH cx_st_error.
endtry.

Installing Run Time engine question

Hi,
I am new to this and I am looking for information on how to set up a test system PC.
I have the 2014 developer software and one test seat but need to know how to install the labview 2014
runtime engine and anything else that I need in order to use this test system PC to run Labview and teststand
applications that I create with my development system PC...
Is there any tutorials or instructions out there that I can download that will tell me everything that I need to install and how on my target test system?
Thanks

the Installation instructions are on the Download Page
Installation Instructions
Close all NI software.
Run the LVRTE2014_f1Patchstd.exe self-extracting executable and follow the prompts.
Repeat these steps for all development systems where you want to install the LabVIEW 2014 Run-Time Engine (32-bit).
The installation files for the Run-Time Engine are automatically extracted to a directory on disk. The installer does not remove the files after installing, if you want to remove these files from disk, be sure to note their location during the unzipping process.
Jeff

How Could I Pass Parameter at run time in form 10g???

I want to pass parameter value with run time,
Example:
When my form run I want to see only the employees of department 10,
& want to pass value 10 when my form run.
http://machine:port/forms90/f90servlet?form=c:\applications\doc_flow\doc_sign&userid=test/test@fil10g...........?
Najeeb

Although your example will work, it is not recommended to use blank spaced in a URL if it can be avoided. The preferred way of passing custom params would be to use the otherparams parameter. For example:
http://server/forms/frmservlet?form=helloworld&otherparams=param1=val1
If there are more than one parameter/value pair to pass, separate using a plus (+) sign. For example:
http://server/forms/frmservlet?form=helloworld&otherparams=param1=val1+param2=val2

How to bind chart type at run time

Hi,
I want to select chart type at run time using a drop down , i know the class name (CL_WD_BUSINESS_GRAPHICS) which
has to be bind. but iam unable to bind the class.
can any one help me.

Hi,
**... check view exists
check me->if_salv_wd_view~r_view is bound.
*... get wd root uie for adding graphic control uie
data:
    lr_wd_root type ref to cl_wd_transparent_container.
lr_wd_root ?= me->if_salv_wd_view~r_view->get_element( if_salv_wd_comp_table_ui=>c_uie_root ).
check lr_wd_root is bound.
*... use a group container
data:
    lr_wd_group type ref to cl_wd_group.
lr_wd_group ?= me->if_salv_wd_view~r_view->get_element( if_salv_wd_comp_table_ui=>c_uie_graphic_container ).
*... if wd uie group container does not exist create group container
if lr_wd_group is not bound.
    lr_wd_group = me->if_salv_wd_comp_table_ui~create_graphic_container( ).
endif.
*... get wd uie graphic
value ?= me->if_salv_wd_view~r_view->get_element( if_salv_wd_comp_table_ui=>c_uie_graphic ).
*... if wd uie graphic does not exist create graphic
if value is not bound.
    data:
      l_source_category type string,
      l_source_series   type string,
      l_source_point    type string.
    concatenate if_salv_wd_comp_table_data=>c_name_node_graphic '.'
                if_salv_wd_comp_table_data=>c_name_node_graphic_category
                into l_source_category.
    concatenate if_salv_wd_comp_table_data=>c_name_node_graphic '.'
                if_salv_wd_comp_table_data=>c_name_node_graphic_series
                into l_source_series.
    concatenate if_salv_wd_comp_table_data=>c_name_node_graphic '.'
                if_salv_wd_comp_table_data=>c_name_node_graphic_series '.'
                if_salv_wd_comp_table_data=>c_name_node_graphic_point
               into l_source_point.
    value = cl_wd_business_graphics=>new_business_graphics(
              view                 = me->if_salv_wd_view~r_view
              id                   = if_salv_wd_comp_table_ui=>c_uie_graphic
              bind_category_source = l_source_category
              bind_series_source   = l_source_series ).
    data:
      l_bind_value type string.
    data:
      lr_wd_category type ref to cl_wd_category.
    concatenate l_source_category '.' 'LABEL' into l_bind_value.
    lr_wd_category = cl_wd_category=>new_category(
                       view             = me->if_salv_wd_view~r_view
                       bind_description = l_bind_value
                       bind_tooltip     = l_bind_value ).
    value->set_category( lr_wd_category ).
    data:
      lr_wd_series type ref to cl_wd_series.
    concatenate l_source_series '.' 'LABEL' into l_bind_value.
    lr_wd_series = cl_wd_series=>new_series(
                     view              = me->if_salv_wd_view~r_view
                     bind_point_source = l_source_point
                     bind_label        = l_bind_value
                     bind_tooltip      = l_bind_value ).
    value->add_series( lr_wd_series ).
    data:
      lr_wd_point type ref to cl_wd_point.
    concatenate l_source_point '.' 'LABEL' into l_bind_value.
    lr_wd_point = cl_wd_point=>new_point(
                    view              = me->if_salv_wd_view~r_view
                    bind_value_source = l_source_point
                    bind_label        = l_bind_value
                    bind_tooltip      = l_bind_value ).
    lr_wd_series->set_point( lr_wd_point ).
    data:
      lr_wd_value type ref to cl_wd_numeric_value.
    concatenate l_source_point '.' 'VALUE' into l_bind_value.
    lr_wd_value = cl_wd_numeric_value=>new_numeric_value(
                    view       = me->if_salv_wd_view~r_view
                    bind_value = l_bind_value ).
    lr_wd_point->add_value( lr_wd_value ).
    me->if_salv_wd_comp_table_ui~add_child_to_container(
      r_container = lr_wd_group
      r_child     = value ).
endif.

My Prompt back ground colour changes during run time in Client / Server Env

Dear Friends, 
 My Prompt of text items are changing its back ground colour according to the Text item's back colour during runtime. This doesn't look good. My look and feel of my application gets spoiled due to this. I tried with Visual Attribute (both prompt & Text item) but of no use. I don't want to use text label as I want to change the prompt during run time. Please help me. 
 Form during Design time 
<IMG SRC="C:\Documents and Settings\Administrator\My Documents\My Pictures\myform1.jpg"></IMG>
Form during Runtime 
<IMG SRC="C:\Documents and Settings\Administrator\My Documents\My Pictures\myform2.jpg"></IMG>
 Thank you.
Regards,
Senthil .A. Perumal.
My version of forms is Forms [32 Bit] Version 6.0.8.8.0 (Production).


Dear Kevin,
Yes I agree with you, but in my case as this application supports bilingual (English & Arabic), I want to change the prompt of the text at run time. Can I change the text of boilerplate text at runtime?
Thank you for your reply.
Regards,
Senthil .A. Perumal.

Open GRPO run time correct report

Query expert,
We are using SAP B1 9.0
We need Open GRPO Report run time query
Example - We made GRPO on 01/09/14 with 5 line items after that we made A/P Invoice on 05/09/14 with 3 line items
If we generate open GRPO report as on 05/09/14 than GRPO showing Open for 2 line item but next date we made again rest 2 line item A/P Invoice
on 08/09/14
Finally after few date we want to generate how many open GRPO as on 05/09/14 than 2 line item data not showing in Open GRPO list but actual 2 line item closes on 08/09/14.
Please help how to made such run time query so that we get correct open GRPO report from SAP.
Thanks
Regards
Mukesh Singh

Hi,
Try this,
/*select from opch a */
Declare @tilldat Datetime
/* where */
set @tilldat=/* a.Docdate */'[%0]'
SELECT A.DocNum,A.DocDate,B.ItemCode,B.Dscription,B.Quantity,
CASE WHEN B.Quantity - ISNULL(C.Qty,0)=0 THEN 'Closed' else 'Open' End LineStatus,c.Docdate 'InvoiceDat'
FROM OPDN A INNER JOIN PDN1 B ON A.DocEntry=B.DocEntry
LEFT OUTER JOIN
(SELECT SUM(B.Quantity) Qty,B.BaseEntry,B.BaseLine,Max(A.DocDate) Docdate
FROM OPCH A INNER JOIN PCH1 B ON A.DocEntry=B.DocEntry WHERE A.DocType='I' AND B.BaseType='20'
GROUP BY B.BaseEntry,B.BaseLine) C ON C.BaseEntry=B.DocEntry AND C.BaseLine=B.LineNum
WHERE A.DocType='I' AND ISNULL(C.Docdate,@tilldat)<=@tilldat
Thanks & Regards,
Silambu

Want to remove Characterstics Structure on run time ( Query Designer )

Similar Messages

Maybe you are looking for