Want to remove IE a lot of file helpers.

Hi ,
I need to take Internet exploder of my system,i t has all these file helpers mime , i would hope to not trash those, is there anything in particular that I need to do before I remove it.
Is there a specific way i should do it, i went to mactopia & could not get any info there no support & as of Jan 31 there will be no security for mac users,
is the message i received. I would appreciate the help.
thank you in advance .
Eme

You are very welcome.
Yes, the plugin article you found has all the information you need.
The only plugins I can think of to add to that list you only need if you want them. I find that I like PDF Browser Plugin (free for personal use) to view pdf files in browsers and the same company makes a Word plugin if you want to open Word documents in your browser.
Finally, you can watch either MacUpdate or VersionTracker for updates to plugins. These sites are also good places to look for any software you might need. They list free and shareware as well as commercial programs.

Similar Messages

I have Two Icons at the Login screen I want to remove one how do I do that?

I have Two Icons at the Login screen I want to remove one how do I do that? I am Migrating a PC to a Mac Mini and the migration hung. I ran it again and I now have two login Icons. One has all my migrated files and the other does not. I want to remove the one without the files.
Thanks

Open System Preferences>Users & Groups, unlock the lock, highlight the one you don't want click on the little minus icon.

Want to remove Lossless files from dual-format library, keep elsewhere

My iTunes library consists entirely of music ripped from audio CDs. Each CD was ripped twice, once in Apple Lossless format, once in AAC format.
For several reasons (chief among them the desire to free up a lot of disk space on my iMac), I want to remove the Lossless files from my iTunes library. But I want to keep all of the AAC files there as they are, along with my playlists (all based on the AAC files only).
However, for a measure of future-proofing, I still want to keep the Lossless files. And whenever I buy a CD, I want to still import it as both Lossless and AAC, keeping the Lossless files handy while adding the AAC files to the iTunes library.
I must obviously begin with an external Firewire drive big enough for my Lossless content. How do I proceeed from there?

I would take this approach, but others might have better suggestions.
First, when you get your external drive, copy the entire iTunes folder to the external drive which will copy everything (media files, database files, artwork, etc.).
Assuming you use the iTunes default settings where iTunes copied added items to your iTunes folder and organizes your library (meaning - everything is all self contained in the iTunes folder), then all you have to do is drag & drop your iTunes folder (not just the iTunes Music folder you find inside the iTunes folder) to the external drive and copy the entire thing.
If you want to test that it worked or would like to actually start using it from that location instead, use these instructions when you start iTunes to point it to the new location...
How to open an alternate iTunes Library file or create a new one
http://docs.info.apple.com/article.html?artnum=304447
If you are just testing, then close iTunes after you verify it works, and restart iTunes again with the same instructions and point it back to your internal drive (original) location. Now you can sort your library by "Kind" which is the format it is encoded as and all the Apple Lossless files will be grouped together. Select the first one, scroll down to the last one, Shift-Select the last one which will select all the ones in between and hit delete! Now your internal drive library is everything except Apple Lossless.
If you wish, you can switch back to the external drive library and do the same for the AAC files.
Now when ever you add a new CD you can do it a couple ways. But probably the most straight forward is to simply put in the CD, open the internal library, import as AAC files. Switch to the external library and import again as lossless.
Patrick

I want to ask about deleting files that have been deleted in the trash but I want to remove it permanently from the trash can not

I want to ask about deleting files that have been deleted in the trash but I want to remove it permanently from the trash can not, indeed I delete files that are partly contained in the application file. I want to delete files that are also quite a lot by 5 Gyga, I've tried to remove it from the normal trash remains are not removed. How should I do?

+

For File -- RFC-- File scenario want to remove sync/async bridge

For File -- RFC-- File scenario want to remove sync/async bridge
Can I work with File -- RFC-- File scenario without BPM
Regards

Hi-
Check this threads
RFC -> File without BPM
File - RFC - File without a BPM - Possible from SP 19.
File-To-RFC without using BPM

I used "my documents" for the profile folder, I removed the profile and firefox asked if i want to remove its file, and it took ALL my file except a few, all my photographs etc, are these now unrecoverable? as they are not in the recycle bin

I used "my documents" for the profile folder, I removed the profile and firefox asked if i want to remove its file, and it took ALL my file except a few, all my photographs etc, are these now unrecoverable? as they are not in the recycle bin
disaster, thanks firefox 1 year of photos lost

Thanks for the obvious question. I mean it. The very same thought came to me this morning and, sure enough, I had booted into another drive--my old one that, of course, had the old desktop, etc.
It didn't dawn on me that this was the case since I hadn't set it as a boot drive but I guess in the course of all the restarts I did, it got switched.
I'm back to normal again.

Removing first line in text file... Memory and HD concern

Hello all,
I want to remove the first line of a text file. This is easy... One way
to do it, is to find the first "end of line" caracter, strip the string
and re-write the sting in file with the "strip to sreadsheet" VI.
Since the file can be quite large (about 120000 lines), is this a good
way to do it. Will it re-write all the line or just moving the "begin
of file" pointer to the second line? If it re-write the whole file,
this option is not very good since I could have to do this operation
quite often. (I want the file to be a kind of circular buffer / backup).
What do you think is the best way to do this?
Thanks!
Vincent

I think you would have to read in all the data and write it to a new file, you could either keep the data in RAM or simply write to another file then delete the original, and then rename the temp one. So obviously that is a lot of data and memory.
My main question is are you trying to use a text file as a circular buffer? If so can you tell us more about the data, ie is it strings of a constant length? Does a user ever need to read the file or could we head binary?
A solution would be to truly make the file a binary file, so you could actually seek through the file easier, and maybe make the first data chunk the location of the most recent write. The obvious danger is then writing over existing data. This solution is still risky because of the data writes.
You may want to look at some of the other file formats like HWS which maintains a hierarchy of data for you so you can simply add and remove data from it. However, a user will not be able to easily read it.

Newbie question: Why is "learn sound model" greyed out when trying to remove background sounds in a file using the Spectral Frequency display?

I am trying to remove background sounds in a file using the Spectral Frequency display. The first edit on a new file, this process works fine:
1. use brush to cover sound
2. right click, learn sound model
3. effects/noise-reduction-restoration/Sound Remover
The next time I try to remove another sound in the file, "learn sound model" is greyed out. I have to close the file and reopen to be able to make another edit. What on earth is going on? Can it only learn one sound model or something?
I'm a newbie, so thanks in advance for your advice!

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Time Machine remove all backups of this files not working

I've just left a company that had me use my MB as a BOYD...now I have to remove all of their stuff, including files held by Time Machine.
I selected their directory in TM and said "remove all backups of this file". It asked for my password and seemed to accept it.
And then nothing happened. I've left the MB plugged in, with my Seagate drive plugged in (by usb), untouched for 48 hours. Even though there is no other activity on the machine TM keeps says that its doing multi-gig backups. And yet, the files I've asked it to remove remain in my various TM backups.
I've heard that TM can be unbelievably slow....is 48 hours not long enough? My MB has 128 gig and my TM has 500 gig so this is not a lot of data.
Suggestions?

Best bet would be log problem on apples support and then set up call with support - particularly if most of the backup is not your stuff - but you want to keep your stuff.
Time Machine Cleanups don't match the length of the backup - because of collapsing of daily files into weekly files - and the hourly ones into daily.
Have you opened Time Machine desktop drive to look at the folder and see what is going on -- you should have daily backups for the last month (in days) and weekly backups back to the beginning. With the delete all of some files that may be an issue where that is the only set of files that changed in that week (if you chose not to back up system files).
Just to be sure - you are running Apples Time Machine and not the backup that came with the Seagate drive?

Removing Incorrect data from .xml files

How do I remove info in the .xml files.
When I 1st got my kit it read my fastest km as 4.55mins/km
This is way too fast as my average is 6.00mins/km.
Because the info is incorrect I am not getting congratulated by Paula or being able to improve slowly as I will never get to 4.55.
HELP

Haplogroup k,
I think you have understood me. The file was created
when the unit wasn't callibrated and recorded a false
reading which was way too fast for me and a lot of
runners also.
I want to post best results now that the machine
works right.
Most people have said that they were amazed by how accurate the Nike+ was right from the box without calibration. But I'll take your word for it.
I can get to the .xml files but it won't delete
records, that's all I want to do.
I don't know what you mean by "it won't delete records." Are you talking about your Personal Bests? No you cannot edit that fle. But you can delete a run from your Nano.
However, you can save all your run data to your computer hard-drive, then RESTORE your Nano. But that will also wipe your calibration data and everything else (personal bests). I guess you could then recalibrate before doing any runs. Then put your old run data (your old xml files) back in your "latest" folder.

Items on ipod that do not show up on Device list, want to remove them

A pod cast and a video I downloaded from itunes and copied to my ipod are on my ipod but when I connect the ipod they do not show up on the lists of items on the device. I can see and play them on the ipod, but cannot find them on the list of items on the ipod when I connect to itunes...
I want to remove them and can't
baffled....

They should be able to help you. You must have the iPod set to manually managed. Podcasts generally work best when set to auto-sync.
To find these files it is easiest to create a smart playlist on the iPod itself with the right rules to find the files while it is set to manually manage. To delete files through a smart playlist you will need to hold the "Alt" key on the keyboard then hit the Delete key. Atl/Delete is for Mac but may be a combination of Delete and Shift, Control, or Windows key on Windows PCs.

Add/Remove Programs - export to text file?

Hello,
I am wondering if it is possible to export a list of everything in add/remove programs to a text file for inventory purposes.
I have not found any easy method to do this short of copying reg files or installer 3rd party software. Since the idea is to save time neither of those are viable solutions.
Does anyone have any ideas?
-Justin

You could try this vbs script that lists installed programs and add info to a text file.
Michael Petersen
Option Explicit
Dim sTitle
sTitle = "InstalledPrograms.vbs by Bill James"
Dim StrComputer
strComputer = InputBox("Enter I.P. or name of computer to check for " & _
                       "installed software (leave blank to check " & _
                       "local system)." & vbcrlf & vbcrlf & "Remote " & _
                       "checking only from NT type OS to NT type OS " & _
                       "with same Admin level UID & PW", sTitle)
If IsEmpty(strComputer) Then WScript.Quit
strComputer = Trim(strComputer)
If strComputer = "" Then strComputer = "."
'Wscript.Echo GetAddRemove(strComputer)
Dim sCompName : sCompName = GetProbedID(StrComputer)
Dim sFileName
sFileName = sCompName & "_" & GetDTFileName() & "_Software.txt"
Dim s : s = GetAddRemove(strComputer)
If WriteFile(s, sFileName) Then
  'optional prompt for display
  If MsgBox("Finished processing.  Results saved to " & sFileName & _
            vbcrlf & vbcrlf & "Do you want to view the results now?", _
            4 + 32, sTitle) = 6 Then
    WScript.CreateObject("WScript.Shell").Run sFileName, 9
  End If
End If
Function GetAddRemove(sComp)
  'Function credit to Torgeir Bakken
  Dim cnt, oReg, sBaseKey, iRC, aSubKeys
  Const HKLM = &H80000002 'HKEY_LOCAL_MACHINE
  Set oReg = GetObject("winmgmts:{impersonationLevel=impersonate}!\\" & _
              sComp & "/root/default:StdRegProv")
  sBaseKey = "SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\"
  iRC = oReg.EnumKey(HKLM, sBaseKey, aSubKeys)
  Dim sKey, sValue, sTmp, sVersion, sDateValue, sYr, sMth, sDay
  For Each sKey In aSubKeys
    iRC = oReg.GetStringValue(HKLM, sBaseKey & sKey, "DisplayName", sValue)
    If iRC <> 0 Then
      oReg.GetStringValue HKLM, sBaseKey & sKey, "QuietDisplayName", sValue
    End If
    If sValue <> "" Then
      iRC = oReg.GetStringValue(HKLM, sBaseKey & sKey, _
                                "DisplayVersion", sVersion)
      If sVersion <> "" Then
        sValue = sValue & vbTab & "Ver: " & sVersion
      Else
        sValue = sValue & vbTab
      End If
      iRC = oReg.GetStringValue(HKLM, sBaseKey & sKey, _
                                "InstallDate", sDateValue)
      If sDateValue <> "" Then
        sYr =  Left(sDateValue, 4)
        sMth = Mid(sDateValue, 5, 2)
        sDay = Right(sDateValue, 2)
        'some Registry entries have improper date format
        On Error Resume Next
        sDateValue = DateSerial(sYr, sMth, sDay)
        On Error GoTo 0
        If sdateValue <> "" Then
          sValue = sValue & vbTab & "Installed: " & sDateValue
        End If
      End If
      sTmp = sTmp & sValue & vbcrlf
    cnt = cnt + 1
    End If
  Next
  sTmp = BubbleSort(sTmp)
  GetAddRemove = "INSTALLED SOFTWARE (" & cnt & ") - " & sCompName & _
                 " - " & Now() & vbcrlf & vbcrlf & sTmp
End Function
Function BubbleSort(sTmp)
  'cheapo bubble sort
  Dim aTmp, i, j, temp
  aTmp = Split(sTmp, vbcrlf)
  For i = UBound(aTmp) - 1 To 0 Step -1
    For j = 0 to i - 1
      If LCase(aTmp(j)) > LCase(aTmp(j+1)) Then
        temp = aTmp(j + 1)
        aTmp(j + 1) = aTmp(j)
        aTmp(j) = temp
      End if
    Next
  Next
  BubbleSort = Join(aTmp, vbcrlf)
End Function
Function GetProbedID(sComp)
  Dim objWMIService, colItems, objItem
  Set objWMIService = GetObject("winmgmts:\\" & sComp & "\root\cimv2")
  Set colItems = objWMIService.ExecQuery("Select SystemName from " & _
                                         "Win32_NetworkAdapter",,48)
  For Each objItem in colItems
    GetProbedID = objItem.SystemName
  Next
End Function
Function GetDTFileName()
  dim sNow, sMth, sDay, sYr, sHr, sMin, sSec
  sNow = Now
  sMth = Right("0" & Month(sNow), 2)
  sDay = Right("0" & Day(sNow), 2)
  sYr = Right("00" & Year(sNow), 4)
  sHr = Right("0" & Hour(sNow), 2)
  sMin = Right("0" & Minute(sNow), 2)
  sSec = Right("0" & Second(sNow), 2)
  GetDTFileName = sMth & sDay & sYr & "_" & sHr & sMin & sSec
End Function
Function WriteFile(sData, sFileName)
  Dim fso, OutFile, bWrite
  bWrite = True
  Set fso = CreateObject("Scripting.FileSystemObject")
  On Error Resume Next
  Set OutFile = fso.OpenTextFile(sFileName, 2, True)
  'Possibly need a prompt to close the file and one recursion attempt.
  If Err = 70 Then
    Wscript.Echo "Could not write to file " & sFileName & ", results " & _
                 "not saved." & vbcrlf & vbcrlf & "This is probably " & _
                 "because the file is already open."
    bWrite = False
  ElseIf Err Then
    WScript.Echo err & vbcrlf & err.description
    bWrite = False
  End If
  On Error GoTo 0
  If bWrite Then
    OutFile.WriteLine(sData)
    OutFile.Close
  End If
  Set fso = Nothing
  Set OutFile = Nothing
  WriteFile = bWrite
End Function
Deploy deploy deploy

I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

It's almost impossible. The new iMacs have a Target Display Mode, but it's built to do that. Without ripping your screen out, finding an acceptable power supply, frame, and whatever electronics to convert a Thunderbolt signal to the screen, the cost will be much larger than buying a cheaper HiDef monitor that runs with an HDMI to Thunderbolt cable to your MacBook 15. In fact, you can sell your 17" MBP for a lot of money, unless it's broken or something, buying you a really sweet monitor.
By the way, I found your answer by searching this forum. I would suggest using the search function here in the futuere.

I want to remove my credit card from my daughter's itunes account but i can't delete the information without getting a notification that i must have the fields filled out

I want to remove my credit card from my daughter's itunes account but i can't delete the information without getting a notification that i must have the fields filled out. When she first got the ipod touch, we did not need to supply credit card information for her to set up her account. Only now that I entered it for one purchase, I can't remove it. Now my daughter has purchased over $300 in downloads the last two weeks.

You definitely can.
To remove your payment information open iTunes and go into your account. An easy way to access your account is from quick links on the store home page. After you login there will be a payment type listed with an edit button next to it. Click edit then select none under card type (next to visa, mastercard, etc).
Afterwards at the bottom of the page select done, then your card will no longer be on file. It will prompt you for a card next time you try to download something that isn't free.

I want to remove my credit card info from my account.

I want to remove my credit card info from my account and turn my account back into a Free account that I can only download Free apps. Can I do this? I have tried to edit the information but the None selection does not appear to be clicked. Im stumped.

You definitely can.
To remove your payment information open iTunes and go into your account. An easy way to access your account is from quick links on the store home page. After you login there will be a payment type listed with an edit button next to it. Click edit then select none under card type (next to visa, mastercard, etc).
Afterwards at the bottom of the page select done, then your card will no longer be on file. It will prompt you for a card next time you try to download something that isn't free.

Want to remove IE a lot of file helpers.

Similar Messages

Maybe you are looking for