Want to remove Windows XP plug&play driver

Ok I did a stupid thing. I had just reconfigured my whole system and forgot that I still hadn't installed my iPod software and I plugged my iPOd into the computer and the drivers were installed by windows...I want to remove them and do it properly otherwise the updating is so slow because it goes through Windows first. Anybody know how to remove iPod drivers that were just installed?

Funky, I would try using Revo Uninstaller to see if it will work for you. I have used it to uninstall many programs that wouldn't go peacefully.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

I have macbook i have 2 OS. I want to remove windows. how to do that?

I have macbook(intel core duo). Now macbook has two OS. Mac OS 10.4.6 and WinXP. Now i want to remove windows from it and upgrade my OS to snow leopard. I am unable find bootcamp etc. Please suggest the procedure.
somnath.

Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

I want to remove windows 7

i want to remove windows 7

gagan jain wrote:
i want to remove windows 7
and do what exactly?
In additon to what Bob mentioned...
If you want to remove Windows 7 from your PC, then a DBAN disk works very well.
If you want to then install OS X, you can't, but you can install Linux.
If you want to install Linux on your Mac, you can't, not directly, well you can but it's a pain and not on newer machines, just the older ones pre-early 2011
If you want to install Linux on your PC, I can help you, but you have to decide what distro you want to install first
If you want Linux to look like OS X on your PC, I can help you.
If you want to dual boot Windows 7 and Linux on a PC I can help you.
If you want to triple boot OS X 10.6, Linux and Windows on your pre-2011 Mac I can help you.
If you want to quad boot, 10.7, 10.6, Linux and Windows on the same pre-2011 Mac I can help you.

I want to remove windows defender...TrustedInstaller

I want to remove windows defender and I must get permission from TrustedInstaller. I cannot find any reference to this.
Back to Win XP

Funky, I would try using Revo Uninstaller to see if it will work for you. I have used it to uninstall many programs that wouldn't go peacefully.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

I want to remove windows explorer 7 and the Yahoo toolbar, if this cannot be done I will find another browser!

I think this is pretty basic. Your browser has always been user friendly and allowed a high level of personalization. I don't like Yahoo toolbar thinking for me. I don't like the intrusive windows explorer 7. I am disturbed that you choose to base your system on this parasite. You have sold us out!
Looking for a new browser!

You can remove the Yahoo Toolbar. It probably got installed as an "optional" item when you installed some other software from the internet, maybe because you did not un-check the option to install that extra item.
*http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
If by saying '''''"remove windows explorer 7"''''', are you referring to '''Internet Explorer 7'''? How do you plan to keep Windows up to date? The Windows/Microsoft update site requires Internet Explorer on your system to use the site.
As for:
*'''''"I am disturbed that you choose to base your system on this parasite. You have sold us out! Looking for a new browser!"'''''
Firefox is not related to or based on Internet Explorer or any other browser. What ever gave to that idea?
Why are you using such an old version of Firefox? Your version is 3.5.7 which is no longer supported and no longer being updated, even for security related issues.

I have partition my Mac and install window I now want to remove window from my Mac how do I do it. Also when I turn on the computer it's opening in window. How do I open in Mac window?

I have partition my Mac and now I don't know how to get back, when I turn on the computer it open in window

Hold down the alt key immediately after power-up, select which OS you want to boot, holding ctrl when you select an OS makes it the default.

I want to remove some images from hard drive, how to tell they are linked to InDesign files?

Is there any way I can find out if the image is linked to an any InDesign file? I have a thousand .indd files on my hard drive, if I open one by one and see the links panel it would take me ages...

Willi Adelberger wrote:
That's said, if you package all files from InDesign you don't get links to linked ai files. Although they are complete for the use in InDesign you might loose the editability of linked AI files if their links are lost. So it would be a good idea to package linked ai files too but this functionality is only available in the Cloud Versions from CS6 and CC, not in the permanent license.
Wait...what?
Maybe I misunderstand the post, or I've missed something along the way, but I've been using InDesign since it was introduced, and I've never heard this before. I output packages using pre-CC versions all the time, and I've never experienced any link or editability breakage with .ai files, or any others for that matter. Can you clarify Willi? What am I missing?

Remove windows Installation from Old WD hard drive and Install Fresh Copy on the New One.

Hi Community! I just bought a new WD Blue 1 TB hard drive, my old hard drive is WD Blue caviar 500 GB, running on Windows 7 ultimate 32 bit.
There are two things I wish to do: 1. Firstly, if it's possible, I would like to copy some videos, images, music etc. from my OLD Drive to the new one.
Please note that, I don't have an external disk to do it, I know that would've been less complicated, but that's not an option at this point. 2. Secondly, once that is done, if possible, I want to remove windows 7 installation from my old hard drive, re-partition it to make it just the storage drive, and finally install
fresh copy of windows 7- 64 bit to the new Hard drive.
Please note that, my old Hard drive is installed on windows 7- 32 bit and now I want to install a fresh copy of Windows 7-64bit instead of 32bit, because I am upgrading my
configuration with better ones.
I am adding 4 GB corsair vengeance ram to my 2 GB corsair ram, so that is 6 GB in total.
I am adding 1 TB hard disk to my 500 GB Hard disk, so that is 1500 GB.
Both my processor and mother board supports 64 bit.
Intel® Pentium® Processor G2020 (3M Cache, 2.90 GHz) And this Mother board - "Biostar H61MGV3"I know that you could clone the partition and migrate the installation from one hard drive to another using the Acronis True Image WD Edition Software, but I don't want that.
In simple words, say I have a dos computer, I installed my 1TB WD hard drive, installed a fresh copy of windows 7-64bit. So my computer is up and running. Now, I have another hard
drive which I wish to use, that is 500GB WD, but it has Windows 7-32 bit installed in it.
So what I want to do is, make this old hard drive a complete 500 gb storage device and remove the windows installation from it, without loosing music, videos, etc. and then lastly
copying the music and other media to the new hard drive, and formatting it completely.
I am perhaps making this very complicated, I know you would have better easier solution for this.
I am frustrated, your help would be appreciated, thanks a lot. Sincerely, Abe

Since you don't want to clone the drive (I agree with you), you can just swap drives and install Windows on the new drive. Windows won't complain that you are installing on a different drive because it only cares if you change more than one piece of hardware at a time. The problem will arise when you copy the files from the old drive because you cannot just connect it via SATA. That would confuse Windows, as both installations were run on that hardware. You need to mount it in an external dock via USB 2.0/3.0 which will isolate the details of the OS. After you copy all necessary files, you can use WDC Lifeguard to write zeros to the entire disk and then create a new partition. After that you can mount it via SATA because it will be a new drive. Do NOT be in a hurry to wipe the drive however, as you don't want to forget something.

Run Windows from an external drive......

I want to boot Windows from an external drive. Why would Apple not allow this to be done. It makes no sence to me at all. You would still have to run Windows from the intel-Mac. To make you waste good MacOS space on the internal drive is a shame. I know... I can remove Windows and re-gain my "lost" space. However, my kid needs to run some school programs that are in the Windows format only. I hope that someday Apple will let BootCamp run from an external drive also.
Apple //GS

I run OS X from one drive, have my home account on a second drive and improves performance.
VMware image is on non OS X boot drive which I think helps so there isn't I/O contention.
OS X shouldn't really be doing much paging regardless of what you are running if you have enough memory. A lot of system and application paging 'maps' to VM, and you can't disable or want to with either Windows or OS X. The Windows \C: is going to be wherever the VM client is located.
Now, whether VMware or Parallels running as an application is paging and using OS X swap, that just depends on your system memory, and goes to OS X boot drive like any application.
OS X can run off external and you could install some windows programs to use an external drive (FAT or NTFS partition) to free up space also. Or use Parallels and put the VM there.

How can i remove windows 7 and reinstall a fresh copy of windows 7

how can i remove windows 7 and reinstall a fresh copy of windows 7

Assuming you installed Windows in a Boot Camp partition, start up Boot Camp Assistant and select the menu item to remove Windows and return the drive to a single partition. Then run Boot Camp Assistant and select the menu item to install Windows 7.

I need all the vi which is related to tktds8k plug play demo.vi in TDS2024B osil

I want to run the tktds8k plug play demo.vi which is in TDS2024B osilloscope's PC commumication CD-ROM but I don't hve the vies which are in this program. would you mind helping me,please?
thank you.

Hi Marzi,
when this vi ("PlugPlayDemo.vi") is provided by the cdrom coming with your scope then all subvis needed by this vi should be contained on this cd too...
Which vis are you missing?
Does the manual given here help?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Removing windows xp from my imac

I want to remove windows xp home edition from my imac

I recently had XP in Boot Camp and then installed it again in VM ware. I just dragged the Boot Camp partition into the waste bin to get rid of it and XP

Cant install windows with 2 hard drives attached

i have an sata drive that i use for boot drive and ata for back up. i can not install windows on the sata drive if the ata drive is hooked up. windows only sees the ata drive. it will not give me a choice to install on the sata. if i unhook the ata i can install just fine on the sata. does anyone have any ideas why?
it's like when i have windows installed on the sata drive, then the windows xp pro cd does see it and lets me install on that drive only, it won't let me choose sata or ata. but if there is no OS installed on anything it only goes to the ata drive. i only want to install windows on the sata drive and do not want to keep unhooking my ata drive constantly when i reinstall windows on the sata.
can someone please help?

Danny you don't have to stay out, I just already said stuff and you told me to do something i already said i did.
Here is my current settings to get it to show my ata drive in windows and i boot from the sata cus windows is on it. currently when i install windows if no OS is on either drive it will auto install on the ata and i don't want that. i want to have a choice what drive and where to install on which means i would always install on the sata drive. but it just installs on the ata not giving me a choice. if windows is installed on the sata already then it will offer me that drive only and not allow me to select the ata. when i do a complete reformat reinstall i must unhook the ata drive and then it will work on the sata drive.
on chip ata mode - legacy
ata config- sata only
sata keep enabled - yes - greyed out. i had to mess with other native or something mode and change it to yes in order to get it like this and work for me. why?
pata keep enabled - yes- adjustable
pata channel selection - both
combined mode option - pata 1st channel - greyed out
sata ports definition - p0-1st./p1-2nd. adjustable
config sata as raid - no, greyed out.
is this a weird set up? and exactly how do i get it so i never have to unhook my ata drive again?
each drive they are all on their own channels. ata by itself, dvdrw by itself and sata by itself. all master.

My Macbook pro was stolen 09/12, the police just returned it to me. I want to remove all the data and start over. Format the drive's etc. I have windows 7 on 1 partion and mountain lion OSX on the apple partition. How is the best way to do this?

My Macbook pro was stolen 09/12, the police just returned it to me. I want to remove all the data and start over. Format the drive's etc. I have windows 7 on 1 partion and mountain lion OSX on the apple partition. How is the best way to do this?

Have a look here...
what-to-do-when-your-hard-drive-is-full.html

I want to triple boot Have Snow Leopard and XP on separate drives and I want Windows 7 on another drive, can it be done by temporarily removing the xp drive and installing windows 7 on another internal drive?

I want to triple boot my Mac Pro I have Snow Leopard and XP on separate drives (osx on drive 1, xp on drive 2) and I want Windows 7 on another drive (drive 4, drive 3 is used by osx for storage), can it be done by temporarily removing the xp drive and installing windows 7 on drive 4?
I realise bootcamp only allows 2 operating systems and refit could change the size of my current xp drive to accomodate W7, that is not an option here for various reasons one being the drive is pretty much at capacity with only about 30gig free (I work with video so that free space fluctautes quite a bit). I have a brand new drive 4 with 1TB set aside ready for W7 but I'm unsure how to go ahead?
any help or advice would be really appreciated, thanks

Boot Camp is used to support Windows on the same drive.
You can have a different OS on every drive.
You could have Windows 7, Vista, and XP all on one drive if you so choose.
I recommend not putting Windows and OS X on the same dirve when talking about Mac Pro - unless you just need something small and lite.
Remove all your other drives while you install Windows 7.
You could even relocate XP - if you need it even - or recover the hard drive space.
You should always keep 30% free for Mac OS; same for data/media drives.
Considering 1.5TB WD Black $110.... and you want OS X to be on a fast high performance drive as well.

Want to remove Windows XP plug&play driver

Similar Messages

Maybe you are looking for