Want To Report On (Video) Queue Avg. Util/Max Util with Prime Infr 2.0

We just got Prime Infrastructure 2.0 in, and I've just been given a very aggressive time-line to implement Telepresence. We have an MPLS network with differential services configured. Particularly on the WAN routers, we have modular QoS with LLQ. I'd like to be able to find/report on the maximum utilized BW in a particular queue (with classifications of CS4, AF4X) per day, or the average BW utilization of that queue per hour is. Could someone please suggest what might be the best way to capture that information?
Thanks for any/all suggestions.
Mike.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

Regarding Video Capture Utility with Monitoring

Hi everyone,
I downloaded the "Video Capture Utility with Monitoring" example. i want to make a few changes to it.
Along with recording the video i want to capture images as well(from the video stream itself) at regular intervals of say 6 seconds.
This is where i found the Recording Video Utility example.
http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/JVidCap.htmlThis example uses a Processor, i tried to create a player object from media locator and then grab frames but it didnt work out.
Can anyone help? I am new to JMF.
Edited by: ashish.kumar.shah on Mar 28, 2009 10:06 PM

ashish.kumar.shah wrote:
Can anyone help? I am new to JMF.TBM and I developed some code a while back that does this...
[http://forums.sun.com/thread.jspa?messageID=10596692#10596692]

Store Report server Job Queue to Database

Hi,
Is it possible to store the reports server job queue to the database with a version of Reports prior to 6i?
Manish

Yes. If you have installed Reports 6.0 and Reports 6.0 patch 1 or later, you shold find a script %ORACLE_HOME%\report60\sql\rw_server.sql - run this (eg as scott/tiger or some other user), and then in the <servername.ora> file add the parameter repositoryconn="scott/tiger@mydb". Then restart the server, and you should find the queue information being pushed into the DB. Note if the API pushes too much information, or you generally want to customise it then you may - just preserve the function/parameter prototypes.
Regards
The Oracle Reports Team http://technet.oracle.com

I have a new Mac Mini, and I want to send raw video...

I have a new Mac Mini (Lion), and I want to send raw video to the Internet, using Ustream, Skype or other services. I don't need cameras, microphones, or other periphrals. My video consists of 1 volt composite (from a video switcher), and the audio is full stereo at 600 ohm line level on each channel. What do I need?
I have a video capture card on my Windows machine; but the results have been crappy at best. And the so-called "Geek Squad" at Best Buy (where I bought the Mac Mini) have been less than helpfull. Further, the on-line Apple Store shows nothing. Maybe someone here has an idea.

You are going to need a video capture device of some sort and I believe the following will be suitable.
http://www.elgato.com/elgato/int/mainmenu/products/Video-Capture/product1.en.htm l
It is available in the US as well http://www.elgato.com/elgato/na/mainmenu/products/Video-Capture/product1.en.html

Want BW Report within Portal in Editable mode

HI Gurus,
              I hav created Bex Appln iView from Query string obtained from "Query Designer". Now I am able to view Selection screen. When I enter some values and execute Report gets generated. But this report is in Display mode.
              My BW functional consultant want this report in Editable mode to update some fields. They are saying they are able to edit If they go to Bex analyzer (Execel Format).
             Please suggest me probable solution. or what I am missing ?

Values in a BW report cannot be changed.
However a report from integrated planner can be.
I expect your are on BI 7.0 with IP.
You need to create a planning cube and additional Planning Levels.
It is a rather different setup but you can read about it here.
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/6e01a04e-0a01-0010-dfbe-951c2c39d169
http://help.sap.com/saphelp_nw04s/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/frameset.htm
Best Regards
- Rasmus
Please reward points if helpfull.

When I want to watch a video on my iPod it automatically plays it on my TV. Why? And how do I fix it?

Whenever I want to play a video on my iPod, on any app, the video automatically connects to my TV.
How can I stop this and play the videos on my iPod?

Hi..
Make sure Flash is up to date.
Open System Preferences > Flash Player then select the Advanced tab then click: Check Now
About blocked plug-ins > Adobe Flash Player updates available for OS X on October 24, 2014 - Apple Support

Someone used my email address to create an apple id. I changed the password because it is freaking me out. I want to report it to Apple but dont know how to go about it. I want the Apple ID deleted. How do I go about that?

Someone used my email address to create an Apple ID. I logged in to appleid.apple.com and I changed the password because it is freaking me out. I want to report it to Apple but dont know how to go about it. I want the Apple ID deleted. How do I go about that? Is there also a way to ensure that the email address wont be used again by this person to create another Apple ID?
This is compounded actually by a Gmail issue. I have had this email address for ages, since the start of the beta. But lately in the last year or so, I am getting mail that seems to be intended for other people but it is using my email address. It is probably one of them who created the Apple ID.

Contact iTunes support: https://getsupport.apple.com/Issues.action

I want to make a video clip using two still pictures, placing side by side. I am able to make with only one at a time.

I want to make a video clip using two still pictures, placing side by side. I am able to make with only one at a time. Also, I am able to move the picture using Transform. But unsuccessfull in making with two stills in same clip. Thank you for reply.

If you want a Picture in Picture effect, stack one still on top of the other with a connect edit. Use Transform to scale and reposition the top image.
Russ

I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!

video
What version of Premiere Elements do you have and on what computer operating system is it running?
Please review the following workflow.
ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
But please also determine if your project goal is supported by
a. format of your source
and
b. computer resources
More later based on details that you will post.
ATR

I want to use a video projector with powerpoint can I use my mac to drive it- and what about sound?

I want to use a video projector with powerpoint can I use my mac to drive it- and what about sound?

Hi Scott,
You should be able to. If the projector has a speaker with acceptable sound, that's one option, otherwise powered speakers or a surround system.
What connections does the projector have?
Exactly which MBP do you have?

I want to upgrade my video card in my HPE H8-1020 - It is a Eyefinity Radeon HD6570

I want to upgrade my video card in my HPE H8-1020 - It is a Eyefinity Radeon HD6570. I want to upgrade to a professional monitor for photo editing and would like to know what is available?

Jimg-evv, welcome to the forum.
What is the make/model of the monitor that you want to buy. I will provide the information for you, but it would help me to know more about the monitor.
You can upgrade the video card. However, most mid-level cards require at least 400W to operate properly. The power supply unit (PSU) in the computer is 300W. A card that would work for your needs would require a PSU upgrade, as well.
I recommend at least 500W; 600W would be even better because it would allow for future upgrades. I like OCZ and Corsair PSU's.
You would need a PCI Express x16 video card. I like XFX, EVGA, Sapphire and PNY in that order. If you upgrade the PSU, this card should work for you.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

I want to upgrade my video drivers and need help

I have a Hp Pavilion A1530N desktop. i want to upgrade its video card to get more out of gaming. I want to know which is a good card to upgrade to and if i will be able to put it in myself without taking my desktop elsewere?

Hello Cesar and Hockney,
Thanks for the posting and response. The A1530N desktop has the following the processor:
Base processor PentiumD 820 (S) DC 2.8 GHz
800 MHz front side bus
Socket 775
ChipsetIntel 945G
This desktop reached its end of life at HP in 2009 which means parts may not be available from HP.
Here is the link to review product specifications for the A1530N:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00674957&lc=en&cc=us&destPage=document&dlc=en&j...

When i want to download au video to work on it, it says that it not possible because of codec or something else i d'ont know how to say in english

When i want to download au video to work on it, it says that it not possible because of codec or something else i d'ont know how to say in english. It is impossible to do anything.

barbara.glet
Thanks for the reply. I need to zero in on your situation a bit more with your help...
When you go to import your .mts file into Premiere Elements 9.0/9.0.1 and you cannot, do you see this type of message only where your specific file
would be named as not support
From Premiere Elements 9.0/9.0.1 using Get Media/Files and Folders
or
Are up looking for your file in the space to the right and wanting to drag it to the Timeline, but you see the thumbnail
with the two arrows on page as seen in panasonic_lumix_dmc_ thumbnail in screenshot below.
But, that has two arrows, one red and the other green. And, you wrote that your two arrows were red.
Or something else other than what is shown above.
If it is as represented in the second screenshot, it is likely that you moved, deleted, or rename that file once it was imported
at another time into the Elements Organizer. In that case, we need to reconnect the file to the project. More on that later
once you supply the above details.
Thanks.
ATR

I used a GarageBand loop in a video I made for youtube. I want to submit this video for revenue. First, is this legal? Second, youtube requires written permission to use songs, and provides a comment box for proof of permission. What do I put in this box?

I used a GarageBand loop in a video I made for youtube. I want to submit this video for revenue. First, is this legal? Second, youtube requires written permission to use songs, and provides a comment box for proof of permission. What do I put in this box to prove It's ok for me to make ad revenue from my video?

Yes, you can use GarageBand loops for commercial purposes. Here's the Apple Doc:
http://support.apple.com/kb/HT2931
(Basically the only thing it excludes is to re-distribute the loops as loops.)
I don't know about the YouTube form, maybe you just fill in "Apple Loops", they certainly have come across this before.

I want standard report to get material MATNR for Which PO isn't created

hi
i want standard report to get material no for which Purchase Order is not created.
only those Material no for Which PO is not generated.
thanks.

Hi,
go to me23n transaction and in the top extreme left click the
Purchase order tab it will show you a drop down list where you will have a option called other purch. order click this and enter the purchase order for which you want to know the exsistence of that purchase order.
if Purchase order is present it will show the order otherwise it will through you an error message.
hope this helps.

Want To Report On (Video) Queue Avg. Util/Max Util with Prime Infr 2.0

Similar Messages

Maybe you are looking for