Want to see constant text, say, TEST with strike off (like in MS word) prit

Hi
I hv a smartform, in which I hv a box with the size of 1 inch height and 10 inch width. I hv some text in it, say, "TEST", well.
Now I need to print it as strikeTEST (meaning strike off like in MS word)
So, pls. let me know How can get it?
Thank you

Thank you,
"there are ready made fonts with strike out option"........Can you pls. mention couple, so that, will get it from Google. Right now, I dont know any such.
Thank you,

Similar Messages

  • HT4428 My 128 Gb iPad cannot do airplay mirroring with Apple TV 3.  It only airplays with screen off (like iPad 1), and it can only do airplay with apps which have the airplay button.  No airplay button when sliding the bottom opened apps to the right.

    My 128 Gb iPad cannot do airplay mirroring with Apple TV 3.  It only airplays with screen off (like iPad 1), and it can only do airplay with apps which have the airplay button.  No airplay button when sliding the bottom opened apps to the right!  Note : This problem persists after HDMI cable has been changed, and Apple TV was reset.  My another iPad 4 64Gb also on the same most updated ISO has no problem.  

    I restarted the iPad, it is okay now!  I think it is because I have been using the smart cover for too long, without shutting down the iPad completely!  It just works fine with the airplay signal appearing again after restarting the iPad.

  • Want to see whole SCN number instead with +E number

    SQL> SELECT CURRENT_SCN FROM V$DATABASE;
    CURRENT_SCN
    1.0254E+13
    SQL> select name,database_role,open_mode,CURRENT_SCN FROM V$DATABASE;
    NAME DATABASE_ROLE OPEN_MODE CURRENT_SCN
    P89889 PHYSICAL STANDBY MOUNTED 1.0254E+13
    how can i see the whole number instead with +E
    Thanks in advance
    Edited by: Dharmesh Kumar on Aug 4, 2009 7:48 AM

    SQL> column current_scn format 999999999999999999
    SQL> SELECT CURRENT_SCN FROM V$DATABASE;
         CURRENT_SCN
             5183434

  • Am new at pages and cannot figure out how to insert a bullet where I want it in the text, not at the beginning of the paragraph.  Word was much easier for me

    Am new at this forum and also at pages and can't figure out how to insert a bullet where I want it in the text, not at the beginning of the paragraph.  I found word much easier to use.  Please help. Trying to do a resume.

    On a US keyboard it is Option + 8 (above the letters). •

  • Is there a way to print all text messages/sms from an iPhone4 3G? I need to go back about 2-3 years back, i also want to see the text messages, not only the tel. number and whether it was sent or received.

    Is there a way to see/print ALL text messages exchanges from my previous phone (Blackberry Storm) to iPhone4 3G?  I want to be able to print ALL text messages from 2 lines on my account. Thank you.

    If they are still stored on your phone, with the BB you may be able to print them; if not natively, you may be able to download an app that will do that.  Offhand, I'm not familiar with one, but google may help.  -The iPhone may have an app that will allow this as well.  Two to three YEARS?  That' s a lot of texting!!

  • Want to see constant value of CPU not the aggregated one from the cube?

    Hi All,
    When I see my layout with fiscyear ,it shows the aggregated values for Quantity,Cost Per Unit,0Amount,which is distributed across period.
    For example if one WBS and one uear(2008) -0Quantity(12),CPU(100) to four periods of one fiscyear.The distribution would be as shown below:- 
    Period       0Quantity      CPU            0Amount
    003.2008         3               100              300
    004.2008         3               100              300
    005.2008         3               100              300
    0006.2008       3               100              300
    Total               12               400            1200
    So in my layout I'll be able to see :-
    fiscyear        0Quantity           CPU         0Amount.
    2008                12                  400            1200
    So 12 * 400 <> 1200 which is logically incorrect.
    Is there any way by which we can get the constant or average value of CPU from the cube???
    Any help would be appreciated.
    Rgds,
    Indu

    Hi Indu,
    If you are using Query designer for generating report, you can have this property...In the properties of CPU>Calculate result as...>Average value...
    This will give you the result as average of all the values.
    Assign points if this helps u...
    Regards,
    KK.

  • I have problems with pictures in hotmail when i use firefox. The pictures still loading and no preview . have to download to my pc to see the picture. i check with other browser like explorer and work fine, it's just with firefox. please any help?

    problem loading pictures in hotmail.

    -> If images are missing then check that you aren't blocking images from some domains. See:
    http://kb.mozillazine.org/Images_or_animations_do_not_load
    -> Check the permissions for the domain in the current tab in Tools > Page Info > Permissions
    -> Check that images are enabled: Tools > Options > Content: [X] Load images automatically
    -> Check the exceptions in Tools > Options > Content: Load Images > Exceptions
    -> Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images)
    -> There are also extensions (Tools > Add-ons > Extensions) that can block images.
    Troubleshooting extensions and themes
    https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    Check and tell if its working.

  • Want to see what images on my site will look like at different resolutions

    I have a website: http://gpcpi.com/news.php and I am trying to see if firefox has a plugin or extension that allows me to see what the images will look like at different resolutions. There is a site: http://viewlike.us/ that does what I am talking about but it gives me problems.
    any plugins that do this?

    *Web Developer: https://addons.mozilla.org/firefox/addon/60

  • I took my SIM card out of my iPhone 4S and now I can't text the people with only iMessage like people with iPod 5 and with iMessage I can't text them back but I can text people that has

    Please help asap

    If you took the SIM out you will not be able to use SMS because you need a cel carrier for that.

  • How to see through text?

    I've read some online advice about this, but perhaps my question is more complex.  I want to see through text, so a flag photo shows up inside of it.  But below that is another photo (suitcase).  So the text with the flag photo  inside is on top of a suitcase image.    So, how to do?  Mucho many thanks in advance!

    In this case it might be easiet to convert the text to outlines (select the frame not the text itself, so you get a "compund path"), then cut the image and select the type you converted, paste into.

  • Can not see long text description of a characteristics in portal

    Hi experts,
    I designed two queries via Query designer and published them to portal but I can not see the the long text description of "Name" attribute belongs to 0BPARTNER characteristics.
    One of the queries shows only the last name of partner in portal while it is showing full name and last name in Bex Analyzer. The other query shows only the key value in both portal and Bex Analyzer.
    I want to see long text description in both queries.
    For an additional information, I'm extracting data from CRM 5.00 to BW 7.00
    What will be the reason for this and how can I solve it?
    Can anyone help me for this issue, it's a kind of emergency situation.

    Hi,
    we have the same problem.
    We want to change <b>only</b> in the screen variable the hierarchy text (from default to long\medium text) but even if there's a possibility to do this, really it doesn't happen anything - it' s possible when you start query, in the selection screen inside every the variable there's a command "User Settings" in which manage what you want to see (I put display custom, as text, medium text).
    I try to do this also in query analizer, selecting variable (hierarchy) and enter in this (user setting), changing in display custom as text - medium text, but even if I save this settings, really doesn't happen anything.
    It seems the system isn't sensitive to this selection...
    By now, if someone has an answer, please write us!
    Thanks in advance,
    Alessandra Mirone

  • How can i see the text of one view?

    I want to see the text of one view stored in my Oracle DB, then i run the next query:
    SELECT TEXT FROM ALL_VIEWS WHERE VIEW_NAME = view_name;
    The problem is that the information return me truncated.
    How can i see the text of one view?
    Sorry, my English is terrible.
    I'm from Argentina.

    Use 'set long 100000000' at sql prompt. Run your query again.

  • Standard Report to see list of purchase orders with  Payment terms

    Hi  ,
    I want to see list of purchase orders with corresponding  Payment terms.
    Is there any standard report available ?
    I checked ME2L,  ME2M , ME80FN and ME81N ...
    But there is no option to add payment term field ZTERM in layout option.
    kindly let me know if there is any way..
    Thanks & Regards,
    Hari priya

    Hi krishna ,
    Thanks for your prompt reply..
    I know we can use dynamic selection for payment term as input seelction...
    but in i want to display payment terms  for list of purchase order in output.
    Is there any way to add zterm- payment term field in output layout of reports.
    Thanks &Regards,
    Hari priya

  • I want to see the calls received, dialed, missed separately

    I have iphone4, I want to see the dialed , received, missed calls separetely, similar for messages, i want to see it as a list with received and sent seperately. there is no option in settings to do this, which is a normal feature for all phones

    Yes, there is no option for that like on normal phones, maybe iphone not a normal phone.
    You can give feedback to apple at http://www.apple.com/feedback
    Maybe in a future OS update they might incorporate your feedback.

  • Short dump when trying to see the text elements of main window

    Hi ,
            The form is running properly in 4.7 c . But when the same is copied in ECC5.0 (unicode) , i 'm getting short dump while trying to see the TEXT ELEMENTS .
                    The message is like ' trying to create a field with zero length'.
    Regards,
    Jytoi.

    hi
    I've never worked on ECC 5.0 version..however, I can only tell u that this could be the issue that code written in 4.7 may not be supported in 5.0..so try to get a good idea of ECC 5.0 before u start coding in this..
    regards,
    shamim

Maybe you are looking for