Want to select the Order type automatically when creating production order

Hi Gurus,
Please help to select the order type automatically while creting the production order..??
Please what configuration settings are avialble to make this happen to me.
THank you in advance.
Naveen.

Naveen,
First priority is the order type defined in the Production schedulling profile(OPKP), assigned to that particular material in workscheduling view. If this is not maintained then,
Second priority is configuration at MRP Group parameters in transaction in OPPR, this MRP Group if assingned to Material master MRP1 view.
Third priority is Configuration at Plant level parameters in transaction OPPQ, this defines the order type when convert planned order to Production/Process order.
Regards,
Prasobh
Edited by: Prasobh Karunakaran on May 28, 2009 8:49 PM..added MRP group paramters also

Similar Messages

  • Error when creating Production Orders: -5002 Invalid Code  [OWOR.Status]

    When creating Production Orders, I receive the error: -5002 Invalid Code  [OWOR.Status] on certain of the entries. Typically 200 orders are created at once.
    What could be causing the error?

    You may check this thread to have a reference:
    Setting the repByIns to Null
    Thanks,
    Gordon

  • User Exit/Badi to change the billing plan date when create sale order

    Experts,
    Please advise which user exit/badi can be used to change the billing plan date wen create sale order.
    My requriement is based on some rules to dynamically change the line item billing plan start date and end date when create sales order.
    I tried some user eixt in MV45AFZZ, but the date got revert to the orginal date from billing plan.

    Hi,
      check the include MV45AFZB.
    Thanks & Regards,
    Sateesh.

  • Error when creating Production Order

    Dear All,
    When i was trying to create Production Order using CO01, there was an error message that says "error when calculating cost, see log, log is deleted when saving"
    what is the problem from that error message? how can i solve this problem?
    best regard,
    MARUFAT

    Cost consist of material cost which are the direct cost, it is calculated from the component and the material itself for which the order is created. If the material is semifinished or finished check whether the accounting view for these material contains value. These material could be costed as per the method mentioned by our friend or you may enter value through MR21 (if the material is not costed atall since it is created). It is recommended to update cost through costing run and by CO member. Now if the material is Raw material you need to maintain PIR.
    The second part could be the activity cost. These follows from the routing/receipe. Mostly the costing error is due to the inappropriate defination of either cost center or activity types. You need to confirm whether activity price are define for the period.
    Appriciating you for taking a concern on the costing error and not overriding.

  • Issue when creating production order

    Hi I encountered below error message when creating the production order:
    error or warning occurrred during master data transfer,I had checked BOM and operation,all is ok (validty date),what's wrong?

    Read the master data Once again IN production order
    Thru Function --> read master data
    If You get the error
    Go to -- log --> read PP master data, You can find the error
    Share The error message

  • Order type automatically assign to product wise for order

    Hi all,
              I gave 4 types of Orders for one plant as per products.   The client ask me  assign that orders   automatically for each product in routing  how i will assign  please let me know.

    Actually routing has no relation to order type.
    You can use Production Scheduling Profile as well as Production Scheduler/Supervisor.
    Firstly, you need to create 4 Production Scheduling Profile and assign 4 Order Type to Prd Sch. Profile.
    Then you need to assign the Profile to material in Work Scheduling view.
    Another way is that you can create Production Scheduler/Supervisor and assign the Pro Sch Profile to the Prd Scheduler, then assign Prod Scheduler to Material Master in Work Scheduling view also.
    From now on, whenever a production order is created for material, order type will be get from the Scheduling Profile.
    To maintain the Prd Sch Profile and Prd Scheduler in IMG: Production > Shop Floor COntrol > Master Data

  • Valueation type error when settleing production order

    Hi ,
    We are geting error  following error when settleing the production order  " For material xxxxx valuation type 01 does not exist for plant xxxx "  wat could be the problem . Is it due to any split valueation activation problem .

    Hi
    Check in MM60, the valuation type maintained for material/ plant combination, if it doesnet exists then create the material type with 01 valuation type in plant.
    Also check in OMWC, valuation category and valuation types are correctly assigned to plant.
    Thanks
    Edited by: Praveen Raghavendra on Apr 16, 2009 8:53 AM

  • Backflush Components With Movement Type 101 When Confirm Production Order

    Hi PP Gurus,
    I found that we have a backflushing material (procurement type: F) in 'Good Movement' with movement type 101 instead of 261.
    The movement type of this material (procurement type: F) in reservation is 261. How did system determine the movement type 101 there?
    Is there any user exit used there?
    Appreciate any help. Thanks.
    Regards,
    Sun Qiang

    >
    Qiang Sun wrote:
    > Hi Arun,
    >
    > The control key has not been changed.
    >
    > In another production order, the error ocurred on another component which is the first line in 'Goods Movement'.
    >
    > Cheers,
    > Sun Qiang
    Hi,
    Pl check in component overview which operation has been assigned to pericular material in Operation tab.
    It should be 10.
    Arun

  • Can I select the Storage type of Azure Backup from April, 1, 2015 ?

    Can I select the Storage type of Azure Backup from April 1, 2015 ?
    I want to select the Storage type for saving money and for purpose.
    "$10 per protected instance for each 500GB per month + Storage consumed".
    The price of Azure Backukp from April 1, 2015.
    I want to select the Storage type.
    LRS type = for client pc backup to saving money.
    GRS type = for critical server backup to protect against disaster.
    Regards,
    Yoshihiro Kawabata

    Short answer - yes, in the new pricing model, you can select LRS and GRS storage.  That being said, we are going to update this and other questions related to the pricing change with a list of FAQs hopefully by next week. Please bear with us
    Thanks
    Shreesh

  • Spliting the sales order qty when iam creating production order

    HI
    I have sales order haveing qty 100 ,then iam creating the production order with respect to salesorder number and item by co08.
    i want to split the order qty while iam creating production order .and after complitiung the sales order qty sysytem should not allow to create production order .
    how can i do this

    Hi,
    1. I dont think in standard it is possible.
    2. You need to find a control mechanism using the user exit only.
    reg
    dsk

  • Auto Material & Capacity Availability check when releasing Production Order

    Dear Experts,
    Is there any configuration in Production Planning that will automatically check material availability and capacity availability automatically when a Production Order is released?
    Meaning to say, users will not need to manually click on the Check Material Availability and Check Capacity Availability button.
    Please advise.
    Thanks in advance.

    Hi,
    I've solved the problem. Just maintain the config in transaction OPJK.
    Thanks

  • How to save LIST_LINE_ID of Price List when create Sales Order Line

    I dont know how save the LIST_LINE_ID of the Price List on Sales Order or anywhere when create Sales Order Line.
    I create with the following steps:
    Step 1: Create Price List for Item A with two line: Line 1 (Unit Price = 10,5, Pricing Attribute with Tax Classification Code = 5%), Line 2 (Unit Price = 11, Pricing Attribute with Tax Classification Code = 10%)
    Step 2: I create Sales Order Line with Item A, Tax Classification Code = 5% --> Unit Selling Price = List Price = 10,5 but dont bookorder
    Step 3: I update the Unit Price of Line 1 into 11.55.
    Step4 : I book this Sales Order. Howerver, I use form personalization to customize Book Event: if the Unit Price of Item on Price List > Unit Selling Price then cant not Book. But I dont konw List Price of Sales Order belong the line of Price List.
    Please help me check this issue. Thanks for your supports.
    BinhTC
    Email: [email protected]

    Bob's right - except that if you have OM: List Price Override Privilege set to 'Unlimited' (and from your scenario it sounds as if you have) it is possible that the value in unit_list_price will vary from what was originally retrieved from the price list.
    In that case, a safer bet is to use :LINE.original_list_price in your personalization as this will always contain what was originally retrieved and will mean you can avoid any repeat lookup via list_line_id.
    Regards,
    Jon

  • Resrtict -  copy from option while creating Production order

    Dear all,
    I want to know how to  Block  the "copy from" option while creating Production order(CO01).
    Regs.
    S.R

    Dear Ramesh,
    You can do this Via SHD0
    Just check the below link
    [Regarding Backflushing(MFBF) fields making display;
    Regards
    kumar

  • How do you shuffle the image order when creating a new slideshow in apterture 3?  i would like to do this automatically when creating a new slideshow.  i see how you do it when you just play a slideshow.

    how do you shuffle the image order when creating a new slideshow in apterture 3?  i would like to do this automatically when creating a new slideshow.  i see how you do it with presets when you just play a slideshow, but i don't see an option to randomly shuffle the slide order when you create a new slideshow.  i know you can sort it by different fields, but i want it to be random.  thanks.

    If you want to rearrange images in random order you can try an AppleScript:
    retrieve a list of selected images from Aperture
    shuffe the list properly
    create an album in Aperture and add the images from the list to the album (make sure that the album set to be orederd manually)
    Here  is a sample script that shuffles the selected images and displays them in random order in Full Screen Mode:
    on removeItem(ims, i)
      -- remove the item at position "i" from a list ims
              if ims is {} then return {}
              if (length of ims is 1) then return {}
              if i < 2 then return rest of ims
              if (i = length of ims) then return (items 1 thru (i - 1) of ims)
              if i > (length of ims) then return ims -- should be error?
              return (items 1 thru (i - 1) of ims) & (items (i + 1) thru (length of ims) of ims)
    end removeItem
    on shuffle_items(ims)
      -- shuffle the items of the list "ims" randomly
              local numitems, ims_shuffled, nextrest, nextpick, i
              set numitems to length of ims
              if length of ims < 2 then return ims
              set ims_shuffled to {}
              set nextrest to ims
              repeat until nextrest is {}
                        set i to (random number (numitems - 1)) + 1
                        set nextpick to item i of nextrest
                        set beginning of ims_shuffled to nextpick
                        set numitems to numitems - 1
                        set nextrest to removeItem(nextrest, i)
              end repeat
              return ims_shuffled
    end shuffle_items
    on shuffleIms()
      -- retrieve the selected images from Aperture
      -- and display them in random order in full screen mode
              local imageSel, shuffled, i
              tell application "Aperture"
      activate
                        set imageSel to (get selection)
                        set shuffled to my shuffle_items(imageSel)
                        set fullscreen to true
                        if imageSel is {} then error "Please select some images."
                        repeat with i from 1 to count of shuffled
                                  reveal {item i of shuffled}
      delay 3 -- chnage that to the time you want
                        end repeat
                        set fullscreen to false
                        return shuffled
              end tell
    end shuffleIms
    shuffleIms()
    Some more code snippets to go from here:
    To create an album:
                        tell library 1
                                  if not (exists album "shuffledAlbum") then
      make new album with properties {name:"shuffledAlbum", image version:shuffled}
                                  end if
                        end tell
    And to add the images from the shuffled list to the album:
                        repeat with i from 1 to count of shuffled
                                  duplicate item i of shuffled to album "shuffledAlbum"
                        end repeat
    Regards
    Léonie

  • Prod Order Type Automatic selection

    Dear Sir,
    In MTO, after MRP run, during the conversion of planned order to production order, how system detect the production order type automatically if I have more that one production order type.
    Thanks and Regards,
    Chetan

    Dear Chetan,
    1.Check if the production scheduling profile/production scheduler has been assigned in the material master.
    2.If only production scheduler has been maintained means,then in OPJ9,check whether this prod.scheduler has been linked to
    prod scheduling profile(through which the default order type can be set),if only prod scheduling profile means then directly check
    in OPKP for this profile what is the order type.
    3.IF no prod.scheduler/prod scheduling profile has been maintained means check whether any MRP group has been assigned in
    MRP1 view which has the default production order type settings in OPPR.
    Check and revert back
    Regards
    Mangalraj.S
    Edited by: Mangalraj.S on Aug 22, 2011 12:37 PM

Maybe you are looking for