Want to send a quattro pro spreadsheet file to my ipad ?

Trying to email a large quattro pro spreadsheet file to an i pad by converting it to an adobe file and then changing it back to a corel file
on the ipad. Can this be done if so how?

Sorry this is the Adobe FormsCentral Forum. You might want to try to post your question on other forums.
Gen

Similar Messages

No Video when using the "Send To Soundtrack Pro Audio File" Command

Hello FCP Users,
After reading and rereading the FCP and STP manuals and scouring the boards; I still can not figure out how to view my video clip while I'm editing/sweetening audio in STP. I have even used the DVD tutorial in an attempt to figure it out (all works fine and good with the tutorial example), but I'm stuck here the real world.
I'm thinking their must be some preference setting somewhere in STP that I've missed. Any suggestions would be greatly appreciated!!!
Best regards,
Jeff
From the Manual:
Soundtrack Pro creates a new audio file project (with the file type .stap) for the clip. The clip can contain video and audio or contain only audio.
In the Final Cut Pro Timeline, Control-click the clip, then choose “Send To >
Soundtrack Pro Audio File Project” from the shortcut menu."
Mac Pro, dual core, 3GHz, 8GB Ram Mac OS X (10.4.9)

Rob,
The audio consists of two separate audio tracks A1 is from a lav mic and A2 is from an on-camera mic.
It was captured DV.
If I rt click the video clip in the "video tl" the "Send To Soundtrack Pro Audio File" in the dialog box is grayed out/not available for selection, but the Send To Soundtrack Pro Multitrack Program is available to select.
If I choose to Send To Soundtrack Pro Multitrack Program I get the following an error message: Error sending selection to Soundtrack Pro.
I've tried de-selecting the "linked selection" in the tl and rt click the audio clip in the "audio tl" and that allows me to "Send To Soundtrack Pro Audio File" , but no video in the utility window of STP.
If I select the "linked selection" in the tl and rt click the audio clip in the "audio tl" the "Send To Soundtrack Pro Audio File" in the dialog box is grayed out/not available for selection, but the Send To Soundtrack Pro Multitrack Program is available to select.
If I choose to Send To Soundtrack Pro Multitrack Program I get the following an error message: Error sending selection to Soundtrack Pro.
It looked all so simple in the tutorial. I'm going on five hours of trying to find an answer to this issue any other suggestions before I slit my wrists? Thanks for your input.
Jeff
Mac Pro, dual core, 3GHz, 8GB Ram Mac OS X (10.4.8)

Cannot use the Send to Soundtrack Pro Audio File Command

I cannot use the Send to Soundtrack Pro Audio File Command, only the Multitrack and it's starting to really get on my nerves. It is unhiglighted. If I unlink the clip and select only half of the audio, the option re-appears. I have no idea what is wrong.

As an audio file, you can only send one clip at a time. This is a feature, not a bug. See the book for more information.
Russ

Unable to "Send to: Soundtrack Pro Audio File Project"

With a solo clip in its own sequence, I wanted to do some audio work in Soundtrack Pro. I control-clicked on the clip and selected "Send to." The option for Soundtrack Pro Audio File Project is grayed out, not allowing me to select it.
Any suggestions?

I figured out you can only do "one track" at a time and not multiple tracks. Once I Option clicked on the single track, it came back. Just FYI.

I want to send a value from JSP file to another JSP file without..

I want to send a value from one.JSP file to another two.JSP file without to show the content HTML of the one.JSP in two.JSP (with include), only take the values processed in a Bean :
===================
Bean
package pck;
import java.io.*;
public class yyyy {
public String getXxx() {
return cccc;
========================
one.JSP
<jsp:useBean id="idBean" class="pck.yyyy" scope="??"/>
<%idBean.setXxx(ccc);%>
========================
two.JSP
<%@ include file="one.jsp"%>
<%=idBean.getXxx()%>
but without to show the content HTML of one.JSP in two.JSP.
Can someone help me?, please.

Why don't just put the common code in a separate file and include it in both. i.e. the code that is in one.jsp that is needed by two.jsp could be put in a common file and included in both pages, thus the HTML is separated off. If this will not work, set a boolean value in two.jsp that can be used by one.jsp to decide if the HTML should be displayed or not.
Steve

How do I download directly to a file on my computer? I don't want to have to go online to find downloaded files. I want to send them directly to a file in my docs.

I don't want to look for downloaded files on the net. I want to download directly to my documents files on my hard drive. Too many steps when it automatically downloads to a file on Foxfire.

Firefox has a basic download manager, without any frills. You may want to look into an external download manager program that has all the features you want for downloading files.

From FCP timeline...send to soundtrack pro audio file project is greyed out

The send to multi track is not greyed out but that's not what I need.
The stereo audio file is 48KHz and I have 7 tracks of audio in the sequence all of which are stereo except the VO track.
If I use "open in editor" to open a stereo file from the timeline soundtrack only imports one channel.
I'm trying to run these stero audio clips through STP using the waveform editor to quickly analyze and fix the "clicks and pops" also adding a low cut off filter to some of the clips to help eliminate some wind noise.
Seems the only way I can get it to work is to export each clip as an aiff file and then import it to STP, edit non destructively, save as a .stap file and then reimport that .stap file back into FCP........
Any ideas why the "send to STP audio file project" is greyed out? perhaps I have forgotten a preference setting somewhere?
All help appreciated.
Thanks,
Dave
G5 dual 2.0, 3.0 GB ram, 2x250 internal Mac OS X (10.3.9) FCP 5.0.4 DVDSP 4.0.3 Motion 2.0.1 Soundtrack pro 1.0.3 QT 7.0.4

Hey, Dave. That can happen if you captured your files with two audio tracks instead of a single stereo track. The two channels will show up on two tracks, but they're not actually stereo in the quicktime file.
When you captured, did you click the "OO" button next to the audio channels to link them to stereo? You can look at the contents of the quicktime file with Quicktime Player and see if you've got one audio track with two channels assigned to "left" and "right". If you have some other configuration in the file, check out these old threads for workarounds, or recapture if that's an option.
http://discussions.apple.com/message.jspa?messageID=1456638
http://discussions.apple.com/thread.jspa?threadID=259929

How can I convert these 250 data points in a spreadsheet file into an array???!!!

I want to convert these points(see spreadsheet file attached) into a 1-D array of numbers and plot them using a vi. I am using the readfromspreadsheet.vi and it just gives me a number 4 and plots that. Please tell me what to do...I'm confused and have a project due!!!
Attachments:
ec1.xls ‏14 KB
test.vi ‏14 KB

Save the excel spreadsheet as tab delimited text file and use "Read From Spreadsheet File" vi to read it.

Send oracle table to pdf file through forms 6i

please dear sirs,
I want to send oracle table to pdf file through forms 6i
waiting help
thanks in advance
Yasser

dear Francois
i use this code which sarah give it to me
and i write as the following put not give me the pdf file
DECLARE
     PL_ID PARAMLIST;
BEGIN
     PL_ID := GET_PARAMETER_LIST('TEMPDATA');
     IF NOT ID_NULL(PL_ID) THEN
          DESTROY_PARAMETER_LIST(PL_ID);
     END IF;
     PL_ID := CREATE_PARAMETER_LIST('TEMPDATA');
     ADD_PARAMETER(PL_ID, 'PARAMFORM', TEXT_PARAMETER, 'NO');
     ADD_PARAMETER(pl_id, 'DESTYPE', TEXT_PARAMETER, 'FILE');
     ADD_PARAMETER(pl_id, 'DESFORMAT', TEXT_PARAMETER, 'PDF');
     ADD_PARAMETER(pl_id, 'DESNAME',          TEXT_PARAMETER, 'D:\YASSER');
     RUN_PRODUCT(REPORTS, 'D:\YASSER\crm02002.rep', ASYNCHRONOUS, RUNTIME, FILESYSTEM, PL_ID, NULL);
END;
pls help me and tell me where is the error which i did
thanks in advance dear

I can't use thunderbird 31.2.0 to send attachement from a pdf file with Acrobat PRO XI

I can't use thunderbird 31.2.0 (Mozilla) to send attachement from a pdf file with Acrobat PRO XI. Each time, Acrobat replies (in french) : "il n'y a pas de client pour la messagerie par défaut". Thunderbird is indicated as "by default" in the list of programs of Windows.
Even if I type my e-mail address, etc. in the account of Acrobat, it doesn't change. Each time, I have to record a PDF file in a folder and return to Thunderbird to send it as attached. It is a too long process, compared with Windows XP with Acrobat Reader or Acrobat 5, I had before.
Would you please help me to explain the process. My OS is Windows 8.1.
Thank you

Thank you for your answer.
What i want to do : to send PDF files as attached documents in a message
generated by thunderbird by my e-mail address [email protected] or
another one I have.
When I introduce my e-mail address under Edit-Preferences-Email
Accounts, Acrobat ask the e-mail account, the password, the IMAP for
ingoing message (and I use POP) and SMTP for outgoing messages. Even I
introduce all the datas, it doesn't change, Acrobat is unable to send
the message. And the process is not convenient, because I need all my
outgoing messages be documented inside Thunderbird.
So, I repeat my request : how can I use thenderbird as program by
default from Acrobat or any other software ?
Thank you for your next message.
Jean-Luc Rongé
Le 21-10-14 14:24, ANAND8502 a écrit :
>
I can't use thunderbird 31.2.0 to send attachement from a pdf
file with Acrobat PRO XI
created by ANAND8502 <https://forums.adobe.com/people/ANAND8502> in
/Acrobat Installation & Update Issues/ - View the full discussion
<https://forums.adobe.com/message/6850947#6850947>

I want to send garageband files to other macs?

I have a macbook pro mid 12' and an iMac mid 11', I want to send a gargeband file to my friend who has a mac himself, but all of the info that I can find says to control click the file and compress, or archive it, and I don't see that option. I think it's because I have a newer version of gargeband but I'm not sure.

Two things:
Does your friend have the same JamPacks and loops installed as you? If not, save your project as an archive. This option will only appear with the "Save as" option, and only, if the project needs saving, because you edited a track. So edit something to force the "Archive Project" option to apear in the export panel.
Once the project has been exported, compress it: Select it in the Finder, ctrl-click it, and select "Compress xxxx.band"from the pop-up menu.
Then mail the compressed zip-file as attachment.
However, your compressed file might still be too large to mail it. If your project contains a lot of real instruments track in high audio quality the project will be easily too large to send it by mail. Then it would be preferrable to upload it to server (Dropbox or similar), so that your friend can download it.
Regards
Léonie

Looking for a Dictation App for my Iphone and MacBook Pro. Want to send all dictation to Word. I have Dragon. Should I purchase Dragon Premium or Dragon for Mac?

Looking for a Dictation App for my Iphone and MacBook Pro.
Want to send all dictation to Word.
I have Dragon. Should I purchase Dragon Premium or Dragon for Mac?

Care to share which OS you are using?
OS has its own dictation program.
Should I purchase Dragon Premium or Dragon for Mac?
Only you can make that determination. Read the system requirements for both and read the reviews.

Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tell me that the file is being used even when it is not. How can I fix this issue?

Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tells me that the file is being used even when iall other programs are closed. How can I fix this issue?

Thanks Jeff, I was not aware that a template could be multi-page. (All the existing templates were 1 page)
But it worked, saving me some steps. When I was finished I renamed the document, and locked it.
Then tried to save it but could not because it was locked. I closed it, went to my Spread Sheet Folder ,
to find it, it was not there. The Finder could not find it either.
So I start over again.
I opened up Numbers and it showed my personal Numbers template folder, it contained both my new
original 4 page template and the vanished saved document!
I tried to delete the template containing these document data and could not - I had to go to the Library/Application Support/Numbers to physically remove it from this folder. Then I started over again. I Finally found out how to make it work: I can now "save as", and then lock, and it will go to place where I want it to be saved and locked.
The secret is: Click on the document title in the menu bar, and it opens up "Save as...", which works the same as in OS 10.4.11, and you can pick the place you want for saving. Once done that, you can then lock the document in the same pull down menu, and then close it.
I also found later that I can delete a template from its folder, by letting Numbers open the templates,
clicking on the one I want to remove, then go to the "Numbers Menu/File/Move to...", select "Desktop"
and from there the selected template can then be thrown into the Trash from there.
It appears now that the real fault of the Numbers software is that the "Save as" command is not available in the "Edit" or "File" pull-down menus, but hidden behind the title of the document.

I have a dll file, i want to send messages from this to the device ,how can i do it in labview

Hi,
I am a new user of labview.
I got Vector Card, DUT, DC Power supply and .dll file. Hoe can i connect dll file and hoe to senf the information to the device,
i want to send/receive a message to that device . and measure temperature , humidity of the device. is any one can help?
i have a .dll file, i want to send messages from this file to the testing device ,how can i do it in labview?

Dear Sandy,
How are your DUT, Vector Card and your PC connected?
What vector card is this?
There are a huge amount of Knowledge base articles that you can access from www.ni.com. Simply go to the website and do a search on dll, etc.
There are also a lot of example problems shipped with LabVIEW that will be very helpful for you to learn from and to modify to meet your needs. Go to File»Find Example ....
There are LabVIEW classes taught locally as well that are very helpful. If you're interested I can arrange for you to receive an email with info about it.
Sincerely,
Sammy Z.

Mail in Mavericks sending my filled form Adobe Acrobat Pro PDF files blank, this didn't happened in Mountain Lion, please help!!! :(

Mail in Mavericks sending my filled form Adobe Acrobat Pro PDF files blank, this didn't happened in Mountain Lion, this where created in Adobe Acrobat Pro X and never had any problems in Monutain Lion, please help me

Thanks for your response, it is a mail problem, I been sendings filled form PDFs estimates for years from my Mac then yesterday I went from mountain lion to mavericks and the problem started, if I zip or move te files to any other windows or Mac computer it opens fine, the problem is when I attach it to a message in mail it attached the file blank

Want to send a quattro pro spreadsheet file to my ipad ?

Similar Messages

Maybe you are looking for