Want to stop being able to see each others E-mail

My wife and currently have the free trial to .mac. We are able to view each others in and out boxes on our E-mail. How can we change this where we have private E-mail boxes.?

Make separate user accounts (System Preferences -> Accounts.) My wife and I have been doing this since OS X 10.1 and would not want to have it any other way.

Similar Messages

  • Win 7 stopped being able to see CP2025dn

    Since yesterday my Win 7/x64 system has stopped being able to see my CP2025dn. So far I have tried disconnecting and reconnecting the printer; reinstalling the HP software (upd-ps-x64-5.3.1.10527.exe); connecting the printer to a new USB port; rolling back all system changes since before the last time the printer worked (and rebooting, or course). None of this helps. The printer remains invisible to Windows -- it does not appear in the Devices and Printers window. My other printer (a Brother HL-5350D) has no problems.

    I have an R100 and I lost my SD2 card and the computer tech gave me an SD3 to replace it. I found the SD3 version more stable as I had some of the same frustrations as you in the past. It sounds like you have done the logical things, but give a complete uninstall / reinstall another go. That is what I did several times. Also, scrub your device manager to make sure all the BT devices are gone (it may be helpful to display all the hidden ones and uninstall them one by one). Finally, make sure the BT Manager is loading when you reboot, or at least that you can manually load it. Sometimes you just have to be patient with device discovery, there were times when it could not find a device and then I would try it a few hours later and there it was. If all else fails, try an SD3 card and the 4.20 stack because that combination cured all problems.

  • Apple TV and iTunes not able to see each other

    I think I have found a bug in either iTunes or Apple TV. My network configuration is a bit complicated so I will describe it first.
    Cable modem into my house hitting a Linksys WRT330N router at a central box in my laundry room. From there my house is hard wired to different rooms of the house. One goes to my office where I have a Apple Extreme N airport, connected to my PowerMac and my iTunes library. Again out of the central point in the laundry room again hard wired I have a wire going to my living room, where I have another Apple Extreme N airport, this is where my Apple TV is hard wired too. I have all the latest firmware and software installed on all my devices. Also both Airport Extreme's are setup using bridge mode and letting the Linksys serve the IP addresses for my network.
    Now to the problem. I can not explain when or why but my Apple TV and iTunes are not able to see each other after about 48 hours. I have tried all kinds of troubleshooting steps including changing my connection from being hard wired to wireless connecting directly to the Airport Extreme my iTunes computer is connected too. I know my network connection is good as I can see trailers and pull up video's from uTube.
    The only way to get them to see each other again is to do a factory reset of my Apple TV. After I do this they can both see each other again. But again after about 48 hours they lose the ability to see each other. I have taken these steps twice now to fix the problem
    I just finished reseting my Apple TV and am going to watch it to see when it stops working the next time.
    All of these problems started the other day when I introduced a new Apple Extreme N router in my my network. The airport Extreme seem to be working fine with my PS3 and XBox 360 that is also connected to it. So I don't think it's the router that is causing the problem.
    If I had to guess I would say something in the Apple TV is locking up. Although I have tried power cycling the Apple TV which does not fix the problem. I'm going through 3 routers to get between the Apple TV and the iTunes library somehow it appears the Apple TV is losing it way.
    I welcome any help as I don't want to have to keep factory resetting my Apple TV to keep it working.

    Fascinating just reading about your setup. I have a WRT350N and have noticed that it will drop its speed, sometimes down to 1Mbps. It seems to do so at about the same time every day, but usually comes back to speed in about 5 minutes. In my experience, the Apple TV will disconnect if the speed falls this low. Try monitoring the Linksys with Netstumbler, Vistumbler, or just in the Windows Network utility.
    Check the "lease obtained" and "lease expired" times for your router to see if that is when the network fails. I've just finished reading an angry thread over at the Linksys forum about the WRT330N where someone mentioned that the router wasn't renewing its lease.
    "I cannot set it run off automatic DHCP from the WRT330N, the router will not assign it an IP every time the lease expires, causing me to have to manually set an IP on the Print server. That's annoying. Having the router drop IP's to individual machines after 12-48 hours...very annoying."
    http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread .id=67412
    If that is the problem, then I would consider setting up a Static IP address for your Apple TV. You can do that through the user interface -> Settings -> Network -> Configure ... (Quite intuitive as you only have change IP address and the subsequent details remain the same.)
    My router assigns IP Addresses in the ranges of 192.168.1.100 ->149. The idea here is to choose an address outside of that range but is not greater than 192.168.1.253 (and should not end in the number 1). You shouldn't have to change the linksys router as long as 50 clients are assigned in that range. You'll have to figure that out by accessing your router webpage at browser address 192.168.1.1 -> the default password is "admin" (without the quotes).
    Good luck.

  • All the devices in our home are in my name, yet everyone has a different email iD, why are we seeing each other's mail?

    I purchased all the devices in my name. When I set up iCloud, though everyone has a different email account, everyone is getting my mail because iCloud is under my name. My wife has a different email account with ".me" she can see my email and hers when she clicks on "iCloud." What must I do so that we both have access to iCloud and we can see only each other's mail? This gets tricky if she accidentally deletes messages of mine which just occurred.
    Do we need to open her up a separate iCloud account? How would I take the MAC that I purchased for her and register it in her name so iCloud knows that it is her?
    I really appreciate you help on this one.
    GH36c

    Have a look here...
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

  • My iMac and MacBook Pro have stopped being able to find one another.

    I have been sharing files between my iMac and MacBook Pro.  Recently they have stopped being able to detect one another.  When I look in the sidebar of the Finder window, neither computer shows the other.  I have file sharing enabled for both computers.  This is a recent problem, and I'm not sure what has changed.  I may have updated software - but don't remember what or when, as I tend to automatically do so when an update becomes available.  I would appreciate any help that you can give.
    Thanks,
    Linda

    Eric,
    Thank you.  I had all my settings right - I had checked and double checked.  The one thing I had failed to do - which is the one thing that often helps - is to shut everything down and restart.  I shut the router and the computers down and restarted them one at a time.  They are once more talking to each other.
    Thank you again,
    Linda

  • My iTunes stopped being able to import all commercial CDs! Can't read them. Please help.

    My iTunes stopped being able to import all commercial CDs! I keep getting this message: The song names for this CD could not be found online. Do you still want to import the songs? These are store-bought, mainstream artists. Never had problems before. This is a new Mac Book pro. I am temporarily relocating and was transferring most of my commercial CDs to Itunes. Went through about 100 CDs, including a dozen today, and now none will read. I tried downloading new software (it was up-to-date), and quitting and restarting. It seems that everyone who had this problem that I found on Internet searches was trying to import burned discs. Please help

    So far, there are three of us who've posted a similar problem, in the last hour or so.   It may be working for you now;  it has started working for some, but it's still not working for me.  It's not your Mac.  It seems to be something related to Gracenote Media Database.
    Your statement says it's stopped importing the commercial CD's but I think you mean it will import them, but not recognize song titles or album titles, even though your CD's are regular commercial CDs.  If that's the case, you are experiencing the same thing I am.

  • When World it be able to log on to The same pages document and see each other corrections When you write/type Them.

    When will it be able to log on to The same pages document and see each other corrections as soon you write/type Them?

    Then use Google Docs if it does what you want.
    MsOffice and LibreOffice are also coming to the iPad, we shall see what they have to offer.
    With luck neither will use iCloud. Apple has yet to get anything right in networking.
    Peter

  • I have not been able to send email for some time but now i have stopped being able to recieve email.

    i have not been able to send emails for some time but in the last two days ive stopped being able to receive, the message says 'username or password incorrect' ive checked all the settings, ive deleated accout and set up again, ive rebooted phone. i tried to sync with pc but this also fails any ideas

    That is correct, They don't seem to know about Mac, never got a single scrap of help from  them.  Try recreating your account from scratch, delete the account, (write down all your settings first) and add an account, see if that works, and if it does, delete the first account to prevent things doubling up on you.  I think that's what I did, it was quite a while ago.  Hope this helps, or gets you pointed in the right direction.  Maybe go to At&t and try creating another account, and if ti works, delete the first.
    One other tihing I did was to reset Safari, as AT&T uses the net, that's about all I can remember, like I said it was awhile ago.

  • My iPhone 4S stopped being able to get mail

    My iPhone 4s (iOS 7.1.1) stopped being able to check mail yesterday. first the error was that my password was incorrect (which had not been entered since setting up the account) which surprised me. After several attempts of entering my password, thinking i was crazy, I restarted the phone--still not working. I deleted the email account and re-entered it, still not working. only now i get an error that says it can not verify account information (mail.xx.edu) first, and then my password continues to be incorrect. I can receive the same mail on my iPad, and i can log on and check online, so i know i have the correct password. my email is an exchange account (mail.xx.edu). i have checked with institution tech support and they say i've done the correct things. suggestions? more info required to answer? thank you!

    I've seen situations before where on older devices something  gets "messed up" in the OS/Account Settings for email.  I think if it were me, and I'd done the basics (including reset with the home and power button and verifying the credentials on another device and with the Outlook Web Interface) I'd backup the phone, transfer all content, erase all content and settings, and setup email again immediately after, before you restored anything else or transferred anything back.  You could also try a restore.  If you use OWA, I'd also go into that and see if there were multiple instances of the device and also be sure none of them are disabled. 

  • My wife and I have shared one iTunes account for 6  years.  We want to create our own Apple IDs, so when we sync to our new iMac we won't see each others contacts, photos, calendar, music, etc.  Is there a way to move music/apps from one ID to a new ID?

    My wife and I have shared one iTunes account for 6  years.  We want to create our own Apple IDs, so when we sync to our new iMac we won't see each others contacts, photos, calendar, music, etc.  Is there a way to move music/apps from one ID to a new ID?

    JoeyV325 wrote:
    Is there a way to move music/apps from one ID to a new ID?
    No.
    One of you create a new AppleID and one use the existing AppleID.
    But you can still use the items in each iTunes library.
    Create separate computer logins for each of you.
    This will give you each your own data. Contacts, calendars, photos, etc. (and your own iTunes library).

  • My kids share use my apple id for their ipods.  Now I'm getting an ipad and wondering if I should get a new id (they don't want to start over).  Can we share but not have to see each other's apps, contacts, etc?

    My kids use my apple id for their ipods.  Now I'm getting an ipad and wondering if I should get a new id (they don't want to start over).  Can we share the id (my email address) but not have to see each other's apps, contacts, etc?  I'd rather share I think, but don't want to create a nightmare for myself.  Also, I already have a kindle app (with purchased content) for my computer - does getting a new id for itunes change my ability to access my kindle account on my ipad?   Thanks!

    So first I'd say that it's not a good idea to start a new apple id if you have a large purchase history.  You may not transfer purchases between apple IDs.  You should consider some other options listed here http://support.apple.com/kb/HE37  Primarily the option where you or your children have seperate icloud accounts/email accounts that sync their contacts apart from yours.  You may use your apple ID for purchases and use a different one for icloud/email/etc.

  • Acrobat pro 10.1.9 stopped being able to OCR scans

    Acrobat pro 10.1.9 stopped being able to OCR scans.
    I am running Windows 7 (64-bit) and I have OCRd several hundred pages of test over the last 5 months, but receintly I get a "Some of the pages couldn't be OCRed"  and "Acrobat could not perform recognition (OCR) on this page because: Unknown error" 
    I've tried "Repair Acrobat Installlation" 3 times and no improvement. 
    Any ideas on how to fix?

    Hi,
    Can you please share the PDF file. Also, can you please try with the latest version 10.1.10
    Thanks & Regards
    Sachin Soni
    Adobe Systems

  • 2 days ago both mine and my daughter's macs stopped being able to open up the apple start up page

    2 days ago both mine and my daughter's macs stopped being able to open up the apple start up page, search google, yahoo, facebook and many other sites. Pictures won't download on sites and we are redirected to http://www.website-unavailable.com/main?url=www.apple.com%2Fstartpage&w=1280&h=6 21&ifc=0# with an orange O in front, which is OpenDNS Guide page.  We live in NW England, has anyone else had similar problems and any suggestions how we can resolve our problem?

    Have you tried another browser (chrome, firefox, and checked your router for blocked websites?) and also quit Safari and reopened? Also reset your cookies (Safari > Preferences... > Privacy ), or reset Safari (Safari > Reset..), or Empty Cache (Safari > Empty).

  • Mail abruptly stopped being able to connect with my .mac account. It will download from other accounts.

    A week or so ago while I was not at home Mail stopped being able to connect and download email from my .mac account. I can still use Mail to download email from my Gmail and Comcast accounts, however.  I can still download .mac email from my iPad and after installing Thunderbird I can download .mac email on my Mac. I downloaded PostOffice, but it won't download .mac email either. There has to be something that has gotten corrupted. Any ideas of what could be wrong and what I can do to get it corrected?
    Thanks.

    Make that "Postbox" not "PostOffice."

  • Trying to switch primary displays without being able to see

    my roommate has an Intel iMac Duo and the built-in monitor is not working. the image is totally obscured by tiny lines. only faint shades can be made out and it's not usable. he bought a miniDVI > DVI adapter and a DVI > HDMI adapter and connected his iMac to his TV. the TV was automatically set as the secondary monitor. so upon start up, his login screen is still on the broken built-in monitor.
    so, my question for y'all is how can we set the TV as the primary monitor without being able to see what we're doing. to do this, we'll have to first log in, (which he said requires typing his user name and password). he tried to log in once by typing his name, hitting tab, typing his password, and hitting enter, but he didn't hear the successful login sound (sound was confirmed to be on by pressing the volume adjust keys). he left for work so i haven't been able to mess around with it. i'm thinking he may need to hit tab first, then type his username, then tab, etc...
    can anyone help with logging in and/or changing the primary monitor? be creative!
    much appreciated,
    eric
    oh ps, i don't know the exact version, but i know it's 10.6 also! if anyone can suggest a better place to post this question, that would be great too.
    Message was edited by: feardisappear

    feardisappear wrote:
    how can we set the TV as the primary monitor without being able to see what we're doing.
    Welcome to Apple's discussion groups.
    Depending on the Mac, the F7 or Command-F1 keys are supposed to toggle in and out of "mirror" mode, which shows the same thing on both displays. I'm not sure if that will help you or whether that will work without your being logged in.

Maybe you are looking for

  • Database adapter not importing table having data type as WF_EVENT_T

    Hi All, I have a requirement to import a table in the Database adapter. That table is having a column of data type "WF_EVENT_T". When I tried to import the table in database adapter I got the error as "The following tables are not supported in the Da

  • Help in using listagg function for more than 8000 char.

    Hi Friends, Need you urgent help in using listagg function for more than 8000 char. I did the below sample SQL and in "e_orig" and "d_orig" for upto 4000 char it is working fine but I have to use it for more than 8000 char. and it is giving error, I

  • Some Photos from card not appearing on Import

    When I Import photos into Aperture from my EOS 1d in many case it tends to just find about a third of the images that are on the card and the "Loading Assets" Indicator in Aperture just spins forever and the rest of the images from the card never app

  • MS Autoroute crashes on Tecra A9

    Hi, I installed MS Autoroute 2007 on my A9(loaded with XP Pro). AR starts up fine but when I start to scan across a map the program shuts down with the usual 'need to close' message .Is this a problem with the graphics card? Other map software, like

  • Email not printing on d110

    my printer did not come with a usb cable.  therefore during setup using the cd i could not connect to the d110.  is this why i cannot print emails?  otherwise, d110 prints fine wirelessly.