Want to trigegr an idoc only if done manual intervention and not automatic
We have a requirement where the idoc needs to be generated only if a user creates the it, and not through automated process.
The particular idoc is the delivery idoc.We can manually create delivery, then only the delivery idoc should be created,else it should not be created.We have process in place by which you can automate the creation of delivery by inbound processes.We do not use any workflow in oursystem.
Any Help would be greatly appreciated.
Hi,
Firstly i didnt get the diff b/w manual and automatic.
If automatic does mean Background job running, check the field BATCH in the structure SYST.
IF sy-batch IS INITIAL. " This is foreground.
check for the other variables in the structure syst and find the diff b/w these fields in manual and automatic modes; and use IF conditions appropriately.
reward if helpful,
regards,
teja.
Similar Messages
-
Can only print with manual feed and NOT from the paper tray from websites
When I try to print something from a website, I must manually feed the paper in the manual feed slot. It will not print from the tray. This problem does not happen when I print something from an email with no downloads or something from MSword or Excel. So, it's most likely a browser printer setting issue. Any ideas?
ThanksProbably related to printer preferences and how they relate to Firefox. If you did the complete reset all the printer setting that Firefox would saved would have been cleared and gone back to the default settings. Without familiarity with that specific printer ''(or even knowing which printer you are using)'' the best advice I can offer is to seek help from a support forum for that brand printer, or for you to reinstall the printer software to get back to the defaults.
-
Why don't all my contacts and calendar events on my iMac (version 10.7.4) stream onto iCloud? For instance, there are 470 entries in my address book but only 270 on iCloud. And not all my appointments in iCal are transferred either.
I have the same problem transfering Address book on iMac to contacts on iPhone (old version 3G - on iCloud). this is a hard wired connectionMight you have 200 entries in On My Mac groups and some of your appointments in On My Mac calendars?
-
I want to store my mac before I go south for the winter. I don't want to lose my info. Can I remove battery and not lose anything?
Yes. Your data are stored in your hard drive, and the battery is not required for the hard drive to keep its data.
However, you may want to google for information about how to store a battery for an extended period - "winter" is a long time, and batteries do run down when left sitting on a shelf. -
i have 5 devices all on one itune account.i have not activated icloud because i dont want it to sync all our information together. is there a way to set it up to only sync the music together and not the contacts photos messages etc
Unless you subscribe to iTunes Match, iCloud doesn't sync music. Just set up every person's devices on a separate iCloud account and your iCloud data and photo stream will remain separated. Each iCloud account will need a separate ID, but it does not need to be the same as your iTunes ID. You can continue to share the same iTunes ID and maintain separate iCloud accounts with separate IDs for iCloud.
You'll also want to use separate IDs for each person for iMessage and FaceTime. This will keep your text messages and FaceTime called separated as well. The easiest way to do this is to have everyone use their iCloud ID for these two services as well. -
I bought a movie on iTunes and when it loads up I can only play the bonus features and not the actual film. The title screen is also glitched and merges with the scene selection. I don't think it downloaded properly. what can I do?
It happens sometimes. Delete the current copies, don't hide from iTunes in the cloud if prompted, close iTunes, reopen, download from iTunes Store > Quicklinks > Purchased > Music > Not on this computer.
While downloading click the download icon at the top right and uncheck Enable simultaneous downloads. You may find it more reliable that way.
tt2 -
How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.
So what is your question?
If you forgot your encryption password:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
The above comes from here:
http://support.apple.com/kb/HT4946 -
I lost my iphone, got a new sim card and put it in my boyfriend's old iphone. When I synch it in itunes it will only synch with his stuff and not mine. Any ideas how I can get it to synch with my itunes??
Are you using a Mac? It sounds like you are using his computer to sync to. If this is the case, then it will sync to all of his stuff unless a new user is created with your personal stuff on it.
When you want to sync your iPhone to that computer, switch to your user first, and then everything will sync with your stuff. If he wants to hook up his iPhone to sync it, then he needs to switch back to his own username first. -
Why do some of my apps only work ón my iphone and not ón my iPad ?
Why do some of my apps only work ón my iphone and not ón my iPad ?
That should work on the iPad. Basic app troubleshooting from Apples support site. Items 1, 2 & 3 should not apply to your situation, but I posted the link at the end if you want to read them.
4. Restart the application
If the issue affects only a single app, try closing just that app:
Press the Home button to return to the Home screen.
Double-tap the Home button to display recent apps.
Tap and hold the affected app until the red minus appears.
Tap the red minus to quit the app.
Press the Home button, then restart the app.
5. Restart your device
Hold the Sleep/Wake button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.
6. Reinstall the affected application
Remove the application from your device and reinstall it.
Touch and hold any application icon on the Home Screen until the icons start to wiggle.
Tap the "x" in the corner of the application you want to delete.
Tap Delete to remove the application and all of its data from your device.
Press the Home button.
Go to the App Store.
Search for the application and then download it again.
Note: If it is a paid app, ensure you are using the iTunes account you purchased the app with originally. If it is not, you will be charged for the app again. For more information regarding downloading previously purchased items, see this article.
7. If the issue is still unresolved
If you continue to experience the issue, contact the developer of the application for further assistance.
http://support.apple.com/kb/TS1702 -
My "Home" calendar only appears on my Mac and not the Cloud. If I uncheck "home on my mac" all events disappear even though it's still checked on the iCloud calendars.
(unless you already have one) Create a new empty calendar from the iCal file menu, select which account you want to create it in.
If you have only a few appointments you can move them individually by editing them and changing the calendar in the edit options.
Alternatively you can copy all the appointments in one calendar to another and delete the original.
To copy a calendar ctrl-click on it from the menu that appears when you select the calendar button (top left corner of iCal) and choose export (export it to your desktop for ease)
Double click the exported file and choose the new empty calendar to import them into.
Ctrl-click on the original calendar from the menu that appears when you select the calendar button and choose delete. -
Suppose I have a list of hyperlinked internet URL's. I want to extract their Internet addresses -- the link locations -- which are essentially hidden in the link text. Is there any way to select and copy the list of hyperlinks, but only copy the link locations, and not the link text?
For example, with the links:
The White House
Google
One of my previous posts
What I really want to copy are: "http://www.whitehouse.gov/", "http://www.google.com/", and "https://discussions.apple.com/thread/2737556".I figured out how to do it. First, copy the hyperlinks onto a blank RTF document in TextEdit and save the file.
Second, open the file from within TextEdit, and make sure that the box "Ignore rich text commands" is checked in the open file dialog box. In the open document, the hyperlinks from my example in my first post will look like this:
{\rtf1\ansi\ansicpg1252\cocoartf1038\cocoasubrtf360
{\fonttbl\f0\froman\fcharset0 Times-Roman;}
{\colortbl;\red255\green255\blue255;\red0\green7\blue232;}
{\info
{\author Garald P. Weller}
{\*\copyright Garald P. Weller}}\margl1440\margr1440\vieww20000\viewh14400\viewkind0
\deftab720
\pard\pardeftab720\sa240\ql\qnatural
\f0\fs24 \cf0 \
\pard\pardeftab720\sa240\ql\qnatural
{\field{\*\fldinst{HYPERLINK "http://www.whitehouse.gov/"}}{\fldrslt \cf2 \ul \ulc2 The White House}}\
\pard\pardeftab720\sa240\ql\qnatural
{\field{\*\fldinst{HYPERLINK "http://www.google.com/"}}{\fldrslt \cf2 \ul \ulc2 Google}}\
\pard\pardeftab720\sa240\ql\qnatural
{\field{\*\fldinst{HYPERLINK "https://discussions.apple.com/thread/2737556"}}{\fldrslt \cf2 \ul \ulc2 One of my previous posts}}\
Third, use the Automator function, "Get URLs From Text," to create a service, which I called "Get URLs From Text," that receives text from any window, gets the URLs, and copies the result to the clipboard:
Fourth, select the entire page above, and go to TextEdit > Services to activate the "Get URLs" service.
Fifth, create a new TextEdit document, and paste the result.
The output is exactly what I wanted, the URLs -- i.e., the link locations -- of the three web pages, without the link text.
Another utility that will extract URLs is CopyPaste Pro, which has an innate ability to extract Internet addresses from either web pages or text pages. -
Need to backup and remove photo library from my iphone. This library was previously backup on a hard drive that crashed. So these photos are only in the photo library and not in the camera roll. If I do a full backup, it only takes the camera roll.
So this is a 2 part question:
1) how to I backup the Photo Library to my new hard drive (as the last one was unrecoverable but previously backed up)
2) how do I remove the Photo Library form my phone (preferably after backup in item 1)
Thanks, JanisSince it has always been very basic to backup your computer and all it's data, Apple provides no way for you to transfer music from your iPhone back to your computer. As you know, you can re-download all iTunes purchases, but music that you ripped yourself you'll have to just re-rip again.
You can try and find 3rd party applications that might help you. I'm sure you'll pay, however.
Let this be a very important lesson learned.
Best. -
How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks
Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community -
Some computers download and install the two approved updates, others only download Windows Update Agent and not the approved updates.
UN-successful Windows Update Log:
2014-05-07 09:33:56:180
1036 e70
Misc =========== Logging initialized (build: 7.6.7600.256, tz: -0400) ===========
2014-05-07 09:33:56:220
1036 e70
Misc = Process: C:\Windows\system32\svchost.exe
2014-05-07 09:33:56:221
1036 e70
Misc = Module: c:\windows\system32\wuaueng.dll
2014-05-07 09:33:56:180
1036 e70
Service *************
2014-05-07 09:33:56:221
1036 e70
Service ** START ** Service: Service startup
2014-05-07 09:33:56:222
1036 e70
Service *********
2014-05-07 09:33:56:544
1036 e70
Agent * WU client version 7.6.7600.256
2014-05-07 09:33:56:545
1036 e70
Agent * Base directory: C:\Windows\SoftwareDistribution
2014-05-07 09:33:56:546
1036 e70
Agent * Access type: No proxy
2014-05-07 09:33:56:547
1036 e70
Agent * Network state: Connected
2014-05-07 09:33:57:315
1036 e70
Setup Service restarting after SelfUpdate
2014-05-07 09:33:57:545
1036 e70
Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-05-07 09:33:57:592
1036 e70
Report CWERReporter::Init succeeded
2014-05-07 09:33:58:326
1036 e70
Report *********** Report: Initializing static reporting data ***********
2014-05-07 09:33:58:376
1036 e70
Report * OS Version = 6.1.7601.1.0.65792
2014-05-07 09:33:58:376
1036 e70
Report * OS Product Type = 0x00000030
2014-05-07 09:33:58:394
1036 e70
Report * Computer Brand = Hewlett-Packard
2014-05-07 09:33:58:444
1036 e70
Report * Computer Model = HP Compaq 4000 Pro SFF PC
2014-05-07 09:33:58:455
1036 e70
Report * Bios Revision = 786H7 v02.00
2014-05-07 09:33:58:504
1036 e70
Report * Bios Name = Default System BIOS
2014-05-07 09:33:58:554
1036 e70
Report * Bios Release Date = 2011-01-31T00:00:00
2014-05-07 09:33:58:554
1036 e70
Report * Locale ID = 1033
2014-05-07 09:34:03:562
1036 f08
Report REPORT EVENT: {082D455B-6E51-4238-A997-1D27D9214A72}
2014-05-07 09:33:58:565-0400 1
199 101
{0011B9ED-9189-4D58-BE25-FA2F13FC3D6C}
1 240005
SelfUpdate Success
Content Install Installation successful and restart required for the following update: Windows Update Aux
2014-05-07 09:34:03:614
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:34:42:049
1036 e70
Agent *********** Agent: Initializing Windows Update Agent ***********
2014-05-07 09:34:42:049
1036 e70
Agent *********** Agent: Initializing global settings cache ***********
2014-05-07 09:34:42:049
1036 e70
Agent * WSUS server: http://csd26.csd.local:80
2014-05-07 09:34:42:049
1036 e70
Agent * WSUS status server: http://csd26.csd.local:80
2014-05-07 09:34:42:049
1036 e70
Agent * Target group: CO
2014-05-07 09:34:42:049
1036 e70
Agent * Windows Update access disabled: No
2014-05-07 09:34:42:063
1036 e70
DnldMgr Download manager restoring 0 downloads
2014-05-07 09:34:42:089
1036 e70
AU ########### AU: Initializing Automatic Updates ###########
2014-05-07 09:34:42:089
1036 e70
AU AU setting next detection timeout to 2014-05-07 13:34:42
2014-05-07 09:34:42:090
1036 e70
AU AU setting next sqm report timeout to 2014-05-07 13:34:42
2014-05-07 09:34:42:090
1036 e70
AU # WSUS server: http://csd26.csd.local:80
2014-05-07 09:34:42:090
1036 e70
AU # Detection frequency: 22
2014-05-07 09:34:42:090
1036 e70
AU # Target group: CO
2014-05-07 09:34:42:090
1036 e70
AU # Approval type: Scheduled (Policy)
2014-05-07 09:34:42:090
1036 e70
AU # Scheduled install day/time: Every day at 3:00
2014-05-07 09:34:42:090
1036 e70
AU # Auto-install minor updates: Yes (User preference)
2014-05-07 09:34:42:105
1036 e70
AU Initializing featured updates
2014-05-07 09:34:42:116
1036 e70
AU Found 0 cached featured updates
2014-05-07 09:34:42:116
1036 e70
AU Successfully wrote event for AU health state:0
2014-05-07 09:34:42:117
1036 e70
AU Successfully wrote event for AU health state:0
2014-05-07 09:34:42:117
1036 e70
AU AU finished delayed initialization
2014-05-07 09:34:42:117
1036 e70
AU AU setting next sqm report timeout to 2014-05-08 13:34:42
2014-05-07 09:34:42:117
1036 e70
AU #############
2014-05-07 09:34:42:117
1036 e70
AU ## START ## AU: Search for updates
2014-05-07 09:34:42:117
1036 e70
AU #########
2014-05-07 09:34:42:291
1036 e70
AU <<## SUBMITTED ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
2014-05-07 09:34:42:341
1036 f08
Agent *************
2014-05-07 09:34:42:341
1036 f08
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-05-07 09:34:42:341
1036 f08
Agent *********
2014-05-07 09:34:42:341
1036 f08
Agent * Online = Yes; Ignore download priority = No
2014-05-07 09:34:42:341
1036 f08
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-05-07 09:34:42:341
1036 f08
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-05-07 09:34:42:341
1036 f08
Agent * Search Scope = {Machine}
2014-05-07 09:34:42:341
1036 f08
Setup Checking for agent SelfUpdate
2014-05-07 09:34:42:342
1036 f08
Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-05-07 09:34:42:349
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-05-07 09:34:42:392
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:669
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-05-07 09:34:44:676
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:754
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-05-07 09:34:44:777
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:781
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-05-07 09:34:44:788
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:837
1036 f08
Setup Determining whether a new setup handler needs to be downloaded
2014-05-07 09:34:44:855
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe:
2014-05-07 09:34:44:862
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:862
1036 f08
Misc WARNING: Digital Signatures on file C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe are not trusted: Error 0x800b0001
2014-05-07 09:34:44:862
1036 f08
Setup WARNING: Trust verification failed for WuSetupV.exe. It will be deleted and downloaded, error = 0x800B0001
2014-05-07 09:34:44:863
1036 f08
Setup SelfUpdate handler update required: Current version: 7.6.7600.256, required version: 7.6.7600.256
2014-05-07 09:34:44:873
1036 f08
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256"
2014-05-07 09:34:44:932
1036 f08
Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2014-05-07 09:34:44:933
1036 f08
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
2014-05-07 09:34:45:048
1036 f08
Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2014-05-07 09:34:45:048
1036 f08
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
2014-05-07 09:34:45:234
1036 f08
Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2014-05-07 09:34:45:235
1036 f08
Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-05-07 09:34:48:415
1036 f08
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-05-07 09:34:48:415
1036 f08
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://csd26.csd.local:80/ClientWebService/client.asmx
2014-05-07 09:34:48:424
1036 f08
PT WARNING: Cached cookie has expired or new PID is available
2014-05-07 09:34:48:424
1036 f08
PT Initializing simple targeting cookie, clientId = 97287ab2-5824-44d2-bf93-8a98da659f77, target group = CO, DNS name = c18714.csd.local
2014-05-07 09:34:48:424
1036 f08
PT Server URL = http://csd26.csd.local:80/SimpleAuthWebService/SimpleAuth.asmx
2014-05-07 09:34:48:454
1036 f08
PT WARNING: GetCookie failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2014-05-07 09:34:48:454
1036 f08
PT WARNING: SOAP Fault: 0x00012c
2014-05-07 09:34:48:454
1036 f08
PT WARNING: faultstring:Fault occurred
2014-05-07 09:34:48:454
1036 f08
PT WARNING: ErrorCode:ConfigChanged(2)
2014-05-07 09:34:48:454
1036 f08
PT WARNING: Message:(null)
2014-05-07 09:34:48:454
1036 f08
PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetCookie"
2014-05-07 09:34:48:454
1036 f08
PT WARNING: ID:cb5babad-3a1d-4e6b-946e-736ed4746e3f
2014-05-07 09:34:48:464
1036 f08
PT WARNING: Cached cookie has expired or new PID is available
2014-05-07 09:34:48:464
1036 f08
PT Initializing simple targeting cookie, clientId = 97287ab2-5824-44d2-bf93-8a98da659f77, target group = CO, DNS name = c18714.csd.local
2014-05-07 09:34:48:464
1036 f08
PT Server URL = http://csd26.csd.local:80/SimpleAuthWebService/SimpleAuth.asmx
2014-05-07 09:35:06:497
1036 e70
AU Forced install timer expired for scheduled install
2014-05-07 09:35:06:497
1036 e70
AU UpdateDownloadProperties: 0 download(s) are still in progress.
2014-05-07 09:35:06:497
1036 e70
AU Setting AU scheduled install time to 2014-05-08 07:00:00
2014-05-07 09:35:06:498
1036 e70
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:14:236
1036 f08
PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2014-05-07 09:35:14:236
1036 f08
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://csd26.csd.local:80/ClientWebService/client.asmx
2014-05-07 09:35:20:118
1036 f08
Agent * Found 0 updates and 79 categories in search; evaluated appl. rules of 859 out of 1494 deployed entities
2014-05-07 09:35:20:194
1036 f08
Agent *********
2014-05-07 09:35:20:194
1036 f08
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-05-07 09:35:20:194
1036 f08
Agent *************
2014-05-07 09:35:20:209
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:35:20:209
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:35:20:209
1036 bb8
AU >>## RESUMED ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
2014-05-07 09:35:20:209
1036 bb8
AU # 0 updates detected
2014-05-07 09:35:20:209
1036 bb8
AU #########
2014-05-07 09:35:20:209
1036 bb8
AU ## END ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
2014-05-07 09:35:20:209
1036 bb8
AU #############
2014-05-07 09:35:20:210
1036 bb8
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:20:210
1036 bb8
AU Featured notifications is disabled.
2014-05-07 09:35:20:211
1036 bb8
AU AU setting next detection timeout to 2014-05-08 11:19:46
2014-05-07 09:35:20:211
1036 bb8
AU Setting AU scheduled install time to 2014-05-08 07:00:00
2014-05-07 09:35:20:212
1036 bb8
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:20:212
1036 bb8
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:25:183
1036 f08
Report REPORT EVENT: {C1B39107-F517-4477-AAE3-9B1F1D6002BF}
2014-05-07 09:35:20:193-0400 1
147 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Software Synchronization
Windows Update Client successfully detected 0 updates.
2014-05-07 09:35:25:183
1036 f08
Report REPORT EVENT: {669B9537-BB71-4190-BA58-A97F725AE4D8}
2014-05-07 09:35:20:194-0400 1
156 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Pre-Deployment Check
Reporting client status.
2014-05-07 09:35:25:184
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:37:32:440
1036 f08
Report Uploading 3 events using cached cookie, reporting URL = http://csd26.csd.local:80/ReportingWebService/ReportingWebService.asmx
2014-05-07 09:37:32:454
1036 f08
Report Reporter successfully uploaded 3 events. -
Program only coverted half my PDF and not working, Please refund me
Program only coverted half my PDF and not working, Please refund me
Hi,
I am sorry that it did not work for you.
May i know is this happening with all files?
Would it be possible for you to send me the document so that i can check what is the actual issue.?
Regards,
Florence
Maybe you are looking for
-
I can't uninstall, repair or install itunes?????
I get an error: Error with install file at C:\Windows\Installer\itunes.msi. The file is none existent. I can't get past this when I try installing, uninstalling or repairing. What do I do? Thanks in advance!
-
I'm using the setTimeToDeliver() method to delay delivery of a message to a JMS queue. If my Weblogic 7 Server goes down before the message is delivered to the queue, is that message lost?
-
JDeveloper 3.0 business component WebDB
Is it possible to build a web site with Jdeveloper 3.0 using business component and WebDB 2.2 or higher thanks
-
Console errors on startup OS X Snow Leopard Server, log files and pkgutil
I have OS X Snow Leopard Server running and there are a number of annoying console messages at startup and subsequent to that. A group of them appear to be related to write permissions for log file (last group). Not so sure about 1-3 below, if they a
-
Single 5870 vs Dual 5770?
For final cut x/compressor/motion needs, would it be more beneficial performance-wise to go with a pair of 5770s or a single 5870?