Want to turn off sound when capturing HD from tape

Is there a setting to turn the sound "off" when capturing from tape into an HD project -- so that I can continue to use other programs (like iTunes) while capturing, without hearing the audio from what's being captured?

Larry,
I don't know if I can offer help on your question, but depending on your computer set up, I personally would try to avoid running any other programs when using FC, especially during a tape transfer.
I'm wondering if the volume controller on the camera itself might also adjust the loudness coming from the transfer in FC without actually affecting the sound transfer.
Jonathan

Similar Messages

How to turn off sound when taking a video

How to turn off sound when taking a video

debrafromusa,
This would be an extremely bad idea, the start up tone is there for a reason. It tells you when your system is attempting to boot, it is also necessary in the even resets like a PRAM reset are done. There is software to mask the sound however as stated it is a very poor idea.
Also, why turn it off. Why not simply put the display to sleep when the machine is not in use. You can easily do that in System Preferences - Energy Saver

How do you turn off sounds when using phone?

I know this question is not appropriate for this forum but I cannot find where it should go. I want to turn off the sounds when I am using my phone, e.g., when I am texting, each time I press a key it make a sound. If I turn down the volume then I cannot hear it ring so this is not the answer.
I have the Nokia 7020 phone. I cannot find any help in the userguide, only how to change ring tones. Anyone have any idea? Thank you.
Solved!
Go to Solution.

On my Lumia 900, it's under Settings -> ringtones+sounds, scroll to the bottom where there is a list of check boxes, and uncheck "Key press". Not sure it's the same for your phone, though.

How to turn off sound when iMac starts up

how to turn off or turn down sound when my imac starts up

debrafromusa,
This would be an extremely bad idea, the start up tone is there for a reason. It tells you when your system is attempting to boot, it is also necessary in the even resets like a PRAM reset are done. There is software to mask the sound however as stated it is a very poor idea.
Also, why turn it off. Why not simply put the display to sleep when the machine is not in use. You can easily do that in System Preferences - Energy Saver

Splitting events when capturing footage from tape

Using Final Cut Pro x, I want to capture footage from tape which is of a more then one event. what is the best way of doing this so as to avoid all of the footage captured as one event.

One way of doing this is to simply go into the Import from Camera window and select the clips that belong to one event then hit the Import Selection button. A window will come up asking you which event you want to import to and also give you the option to create a new event. After the little clocks fill up on each of the selected clips, that import is done. Now you can select the other clips and import them in the same way specifying a new event when you are asked where they are to go. Best wishes.
stpehen

Turn off notes when printing PDF from preview?

How do you turn off the annotations when printing a PDF from Preview so that the annotation notes do not appear in the margin of the printed document? Is this possible? If not, it should be.
When a page has annotations preview automatically reformats the printed page so that the note appears alongside it. I would like to print it the normal side, without the annotations that I added. I don't mind if the little flag remains in the text to indicate that there is a note, but I can't figure how to turn off the function that reduces the page and switches the orientation.

The "Print" window that you open when printing contains various optional settings prior to proceeding with printing.

Any way to turn off errors when updating pages from the template?

I'm using Dreamweaver MX. My site is huge. It's an intranet
spanning dozens of departments. Some of those departments have
subsites that don't fall under the intranet's control, although
they are embedded within our site's folder structure. When I make a
change to the template and update pages, every time I hit one of
those subsites I get tons of errors, from "template not found" to
"unmatched body tag". The errors that pop up each have to be
clicked on before the updating can continue. I get hundreds of
these.
Is there any way to make errors not pop up while updating
pages from the template? Or even to exclude certain folders from
being checked? (Cloaking doesn't do it.)

> I'm using Dreamweaver MX. My site is huge.
Both of these are problems, I'm afraid. Combining that with
templates is
really trouble.
> "unmatched body tag".
Errors such as this are definitely caused by errors in your
page itself.
Can you show me a page where you would get this?
> Is there any way to make errors not pop up while
updating pages from the
> template? Or even to exclude certain folders from being
checked? (Cloaking
> doesn't do it.)
Valid code will not produce these errors. Unfortunately, the
only way to
avoid them is to remove any validation hiccups from your
pages.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"abna" <[email protected]> wrote in message
news:f14ue2$pk5$[email protected]..
> I'm using Dreamweaver MX. My site is huge. It's an
intranet spanning
> dozens of
> departments. Some of those departments have subsites
that don't fall under
> the
> intranet's control, although they are embedded within
our site's folder
> structure. When I make a change to the template and
update pages, every
> time I
> hit one of those subsites I get tons of errors, from
"template not found"
> to
> "unmatched body tag". The errors that pop up each have
to be clicked on
> before
> the updating can continue. I get hundreds of these.
>
> Is there any way to make errors not pop up while
updating pages from the
> template? Or even to exclude certain folders from being
checked? (Cloaking
> doesn't do it.)
>

Turning off sound alerts altogether

I've plugged in headphones to my iBook, but get annoying sound effects as I work in Microsoft Word, with sounds everytime I cut/paste, drag a word, etc. and at the same volumn as the music I'm listening to on the headphones. I work a lot on Word and want to turn off sound alerts altogether but don't see that option.

Did you look in your Word Preferences?
In my version (Word 2004) in Prefences:General is a checkbox
"Provide feedback with sound"
Jeff

Can I turn off the Ken Burns effect from all stills at once?

I am using iMovie 09. I am creating a slideshow. I want to turn off the Ken Burns effect from all stills. Is there a way to do this in one operation?
Mary Lou

Yes. Select one still. Open the Rotate, Crop, Ken Burns Tool on the middle Toolbar. Set it to FIT (for letterboxing) or to CROP (for it to fill the screen, but cut off the top and bottom). This will turn off Ken Burns.
Now select the photo you just adjusted and EDIT/COPY (or Command-C).
Now click EDIT/SELECT ALL (or Command-A) to select all photos.
Finally, click EDIT/PASTE ADJUSTMENTS/CROP ADJUSTMENTS to apply to all photos.

I am changing to iCloud on my iMac, MacBook Air and my iPhone. My iMac and MacBook both moved over to iCloud but my iPhone when I go to Settings and click on iCloud it shows my Mail setting turned Off. When I turn it on it wants me to create a new

I am changing to iCloud on my iMac, MacBook Air and my iPhone. My iMac and MacBook both moved over to iCloud but my iPhone when I go to Settings and click on iCloud it shows my Mail setting turned Off. When I turn it on it wants me to create a new email address to turn on iCloud Mail. I already have to "me" accounts plus another email address and don't want to create another one. I don't understand why it's asking me to do this on my iPhone but didn't ask on my iMac or MacBook and is there a way around creating another @me.com email address?

Hello Timmy790
Try the suggestions in the article below to resolve the issue of seeing your old Apple ID on your iPhone.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Regards,
-Norm G.

How do I get to the startup menu. I have 6 apps start when I power on that I want to turn off.

I want to turn off some of the apps when my system starts up. There are about 6 apps, programs, that start and it takes too long for the mac to get going.

Two possibilities: Open System Preferences, select Users & Groups, and right above your user picture you'll see buttons for Password and Login Items. Select Login Items. In the window pane you'll see a list of items that are selected for startup at login. Select an item you don't want and click on the minus button at the bottom of the pane.
If any (or all) of the programs that are starting up don't appear in this list it means that these programs were running when you shut the computer down. In Lion, by defaul, any program running when the computer is shut down will automatically restart. There's a dialog box that appears when you select logout or restart which allows you to cancel this for that logout only. In other words, you much click the checkmark each time you logout/quit. I don't shutdown often and have an SSD so this behavior doesn't annoy me much, except at work where i don't have an SSD and I do shut down more often.

I am getting an error message while managing my cloud it says "cannot turn off backup" when i want to remove apps from the clous. how do i fix?

i am getting an error message while managing my cloud it says "cannot turn off backup" when i want to remove apps from the clous. how do i fix?

Hey ktillis88,
Thanks for the question. Based on the information you have provided, the following resource may be helpful:
iCloud: Understanding Backup alert messages
http://support.apple.com/kb/TS4576
"Backups for appname cannot be turned off at this time."
This message occurs if disabling Backup for an app on your iOS device does not complete successfully. Wait a few minutes and then attempt to disable Backup for the app again. If you continue to receive this alert, contact iCloud Support for assistance.
Thanks,
Matt M.

I have installed mountain lion. Now when i want to turn off my Mac mini, it restart and not turn off. What happen?

i have installed mountain lion. No problem with the instalarrion.
Now when i want to turn off my Mac mini, it restart and not turn off.
What happen?
Alain Hermosilla Ringger
Chile

I reply to my self
I have a mac mini late 2009 with Mountain Lion
I solved this problem disabling the second monitor from the dvi conection and conected it again with the vga plug in. My main monitor also conected by a hdmi plug to my mac mini
My mac mini turn off with no problem now and the rebbot loop disapear
Alain Hermosilla
Chile

My I phone it is acting weird when I go to the lock screen it will take a picture and I was not touching my phone it will keep asking me if I want to turn off my phon.

My i phone is acting wired, when I go to the lock screen it will take a picture but I was not touching my phone and it will ask if I want to turn off my phone. o don't know what's wronge with my phone. I'm scared that someone miget of hack my phone?!

It's not hacked, it's likely experiencing one or more hardware issues, and you need to take it in for service.

TS1368 when downloading large files such as videos of television season do you need to turn off autolock to prevent download from halting

when downloading large files such as videos of a television season do you need to turn off autolock to prevent download from halting? And if so, if the download will take a significant amount of time (not sure how much offhand) how do you prevent burn in from prolonged screen image?

Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

Want to turn off sound when capturing HD from tape

Similar Messages

Maybe you are looking for