Want to uninstall Vista and install XP?

Open Boot Camp Assistant and restore start up disk to a single volume? Then run Boot Camp again to install XP?
Thanks,
Andrea

Andrea:
You are right that is the procedure in a nutshell.
For confirmation to the above please click [HERE|http://docs.info.apple.com/article.html?path=Mac/10.5/en/15554.html].
Once the HD is restored to a single OSx volume then yes you can run Boot Camp assistant again and install Windows again.
Axel F.

Similar Messages

If i uninstall itunes and install it again, will all my stuff be on it still

if i uninstall itunes and install it again, will all my stuff be on it still

Hello Leanne,
Thank you for the question. I understand that you are concerned about losing your media files when uninstalling, but the media files and the application files for iTunes are stored in different locations. When uninstalling the iTunes application, your media files are not affected.
The following article provides information about where the media files are stored:
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Use the steps in this article to uninstall and reinstall iTunes:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Thank you for using Apple Support Communities.
Best,
Sheila M.

TS1538 My ipod touch will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

My ipod will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Why is it when i update my status on facebook from iohone it splits the updates into two differents boxes with some funky symbol. I have uninstall facebook and installed it over and it still does it. only the facebook IPHONE app.

why is it when i update my status on facebook from iphone it splits the updates into two differents boxes with some funky symbols at the beginning.. I have uninstall facebook and installed it over and it still does it. only the facebook IPHONE app where it says to update staus text to FBOOK i have already update my phone too.
if i go on the facebook site and update there through a brower on iphone it will work fine just cant us IPHONE mobile upload, . But its a pain of not using my IPHONE APP for facebook cause it does that.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

It says this when I try to open iTunes: Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 I've tried uninstalling it and installing it several t

It says this when I try to open iTunes:
Apple Application Support was not found.
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again.
Error 2
I've tried uninstalling it and installing it several times. I've tried to download Apple Application Support separately but it just says:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4... Please refer to Help and Support for more information. HRESULT:0x800736FD

You have missing information in your Windows programming.
You need to repair your computer so it can run iTunes. If you plug those error codes into your browser you may get an answer.

Apple application was not found, apple application support is required to run ituneshelper. please uninstall itunes and install itunes again error 2. What does this mean?

apple application was not found, apple application support is required to run ituneshelper. please uninstall itunes and install itunes again error 2. What does this mean?

You can try installing 7-Zip (free), then right-click on the iTunesSetup.exe or iTunesSetup64.exe file to unpack its contents, and install AppleApplicationSupport.msi as a standalone component. It may still not install successfully, but if it doesn't you may get a more useful error message regarding the reason why.
See also Troubleshooting issues with iTunes for Windows updates.
tt2

Im having troubles trying to download desktop apps, the blue wheel still spinning in the app tab, i've already try the solutions i've read here, uninstall CC and installed it again, uninstall it, download it again and install ir, and nothing works, I'm wo

im having troubles trying to download desktop apps, the blue wheel still spinning in the app tab, i've already try the solutions i've read here, uninstall CC and installed it again, uninstall it, download it again and install ir, and nothing works, I'm worried because i have a course of some software tomorrow (oct 10). I have a mac, and it has all the system requirements. Can someone help me please?

I think I had the same problem. I've also tried a lot but I found my way out.
Follow every step of this:
Creative Cloud Help | Install, update, or uninstall apps

My iphone doesn't conect with my computer. He says you can't use it you softwear is not up to date please uninstall itunes and install itunes for windows 64bit. I do that but it doesn't work. So what can i do?

my iphone doesn't conect with my computer. He says you can't use it you softwear is not up to date please uninstall itunes and install itunes for windows 64bit. I do that but it doesn't work. So what can i do?

It won't pass 10.3.
What does this mean?
I figured it out. Thanks!!!
What did you figure out? How about posting how you resolved it?

The "+" sign which opens NEW TAB has stopped working. I have to open a new window each time. I tried uninstalling firefox and installing again but the problem still persists. Somebody guide me on this.

The "+" sign which opens NEW TAB has stopped working suddenly. I have to open a new window each time. I tried uninstalling firefox and installing again but the problem still persists. Somebody guide me on this.

Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.

I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work. What should I do

I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.
What should I do?

Hi Anto2211,
Please follow the thread: Black screen CC where this issue is already discussed and resolved.
Let me know for any further query.
Thanks,
Ratandeep Arora

I'm getting an error message "There was an error when opening this document. Access denied" on some PDF's that I was able to open in past. Uninstalled XI and installed X but same problem. Any thoughts?

I'm getting an error message "There was an error when opening this document. Access denied" on some PDF's that I was able to open in past. Uninstalled XI and installed X but same problem. How can I access these files?

I have exactly the same problem. The interesting thing is that the file opens when I attach it to an email and open it out of the email. I already saw the advice you provided in similar post from Aug last year and checked the security settings of the file and the folder. But according to that I have all rights.
My OS is Windows 7 Enterprise.

TS4433 M 7th generation ipod is not recognised in itunes. It is in windows and i have uninstalled it and installed again 3 times any ideas

7th generation ipod is not recognised in itunes. It is in windows and i have uninstalled it and installed again 3 times any ideas.

Hey haptat1,
Thanks for the question. I understand that your iPod nano is not displayed in iTunes when connected to your computer. The following articles include troubleshooting steps that may help resolve your issue, depending on the symptoms:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
iTunes reports that "iTunes cannot recognize this iPod at this time"
http://support.apple.com/kb/TS1416
Thanks,
Matt M.

I have Firefox 3.6.8 and want to uninstall it and then reinstall it because of a problem. Where is my Bookmark file kept because I don't want to lose it and won't uninstall until I find where it is filed. Please help me.....Thanks John

I want to uninstall Firefox 3.6.8 because of a problem I am having and then once I do that I will reinstall it. My problem is I don't want to lose my Bookmarks. Can someone please tell me where they are filed so I can make a backup copy before I do any uninstalling. Thanks, John

Bookmarks and other personal data are located in your Profile folder. See:<br />
* http://support.mozilla.com/en-US/kb/Profiles
* https://support.mozilla.com/en-US/kb/Backing+up+your+information
* http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile
* http://kb.mozillazine.org/Show_hidden_files_and_folders
* http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
When un-installing Firefox be sure that the box specified in Item 7 of the article below (and the image that I have attached) is NOT checked:
*Uninstalling Firefox: http://support.mozilla.com/en-US/kb/uninstalling+Firefox

HT1923 Want to uninstall iTunes and reinstall. Unable to remove Bonjour and Apple folders. Error message that they are in use. iPodService.exe is not running.

Want to uninstall and reinstall iTunes. Ran uninstall for itunes and QuickTime. Unable yo remove Bonjour and Aple program. Error message that they are in use or the folder is open, ipodservice.exe is not running.

" The feature you are trying to use is on a network resource that is unavailable. I tried to uninstall iTunes, and it would not uninstall. It gave me the following message " The path C:\documents and settings\network service\local settings\application data\apple\apple software update\iTunes.msi cannot be found.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

SCOM 2012 R2 Agent Deployment - Uninstall Old and Install New

By chance anyone come up with a scripted method for removing an existing SCOM 2012 SP1 agent and installing a new 2012 R2 agent? While I've come across a few scripts I'm trying to kill a few birds with one stone. This is a cross-domain attempt where the
SCOM servers sit in one domain and the member servers are scattered across multiple domains. Member servers range from Windows Server 2003, 2008, and 2012. In most cases the servers have the 2012 SP1 agent installed and in some cases there are multiple management
groups from previous SCOM standups. In addition there's a separate DEV SCOM 2012 R2 environment to manage DEV/QA servers. Active Directory Integration is configured and I have the necessary security groups created. There is a group policy created which is
filtered to just that security group. So the plan is to simply drop the servers into the correct group and have the agent installed via group policy start up script. ADI should have DEV servers appear in DEV SCOM and PROD in PROD SCOM.
Although there are ways to facilitate agent deployment via the console I need to perform a staged migration against a ton of server so as to not impact the existing production environment. So I'd rather do this remotely to pre-selected servers. This process
should involve removing the existing agent, installing the new one, and if possible removing any existing management groups. So far I've come up with the following:
Uninstall SCOM Agent:
%WinDir%\System32\msiexec.exe /x <path>\MOMAgent.msi /qb
Install SCOM Agent:
msiexec.exe /i \\path\Directory\MOMAgent.msi /qn /l*v \logs\MOMAgent_install.log USE_SETTINGS_FROM_AD=0 MANAGEMENT_GROUP=<MG_Name> MANAGEMENT_SERVER_DNS=<MSDNSName> ACTIONS_USE_COMPUTER_ACCOUNT=0 ACTIONSUSER=<AccountUser> ACTIONSDOMAIN=<AccountDomain>
ACTIONSPASSWORD=<AccountPassword>
Remove Management Group via Script
http://gallery.technet.microsoft.com/Remove-a-Management-group-336c849a/view/Discussions#content
I'm guessing this wheel has already been invented or maybe there's a better way. So I'm open to ideas or suggestions.
Any responses appreciated.

Wow! 4 days and no responses, not good Microsoft SCOM Community. So here's a status on this issue.
As stated I have Active Directory Integration configured which means:
I see the OperationsManager container in AD: dev_scom
I see the HealthService SCP and separate OU's for each of my management servers.
I have an ADI security group containing my management servers and scom action account.
I have an Agent security group which will contain servers the scom agent will be deployed via group policy.
I also have an AD LDAP query set to target the SCOM agent group.
(&(objectCategory=group)(name=DSCOM_ADI))
I finally get the script to install via the following steps:
Reference:
http://technet.microsoft.com/en-us/library/cc754995.aspx
http://technet.microsoft.com/en-us/library/cc770556.aspx
http://blog.coretech.dk/msk/install-a-scom-2012-agent-silent/
1. Launch Notepad ++ and enter the following:
msiexec /i
\\server.yourdomain.com\opsmgragent\%Processor_Architecture%\MOMAgent.msi USE_SETTINGS_FROM_AD=1 MANAGEMENT_GROUP=DEV_SCOM MANAGEMENT_SERVER_DNS=YourSCOMsrvr1.yourdomain.com ACTIONS_USE_COMPUTER_ACCOUNT=0 USE_MANUALLY_SPECIFIED_SETTINGS=0 ACTIONSUSER=svc_dscom
ACTIONSDOMAIN=yourdomain ACTIONSPASSWORD=YourPassword! AcceptEndUserLicenseAgreement=1 /qn /l*v c:\scom2012r2mmainstall.log
2. Save the script to a name of your choice. For me it's installdopsmgragent.cmd. Watch the extensions as you may end up saving it as installdopsmgragent.cmd.txt.
Note: Make note of this steps in the reference articles listed above:
"In the Add a Script dialog box, do the following:
In the Script Name box, type the path to the script, or click Browse to search for the script file in the Netlogon shared folder on the domain controller."
It's been a while since having to use a startup script so it took me a minute to figure this out. "getting too old 'fer this..."
3. Copy the script to the Netlogon folder which is located in the following directory on my Windows 2012 server: E:\SYSVOL\sysvol\yourdomain.com\scripts
4. Launch the group policy management console, create a new policy, edit it, and navigate to the following location:
Computer Configuration > Policies > Windows Settings > Scripts (Startup/Shutdown)
5. Double-click Startup to open the Startup Properties window.
6. Click Add and browse to the location of the script which you copied to the Netlogon share.
7. Click OK to close the Startup Properties window.
8. Close the Group Policy Management Editor.
9. Link the policy to an OU containing the servers.
10. Add the SCOM Agent group to the Security Filtering area of the group policy. I also remove Authenticated Users.
Note: make sure you have a few test servers in your Agent security group.
11. Drop to a command line and run gpupdate /force. You can also use gpupdate /force /sync but you will have to reboot the box you're running this from.
12. Log into one of the servers you have slated to deploy the agent to, drop to a command line, and run the same gpupdate command.
13. Follow this with a gpresult /r command to ensure that you see the policy applied in the Computer Settings area.
14. Reboot the server and you should see the startup script run.
15. Log into the server and launch the Control Panel.
16. If all went well you'll see the "Microsoft Monitoring Agent" icon.
17. Launch Event Viewer, navigate to the Operations Manager events node located under Applications and Services Logs and validate the logs.
17. If all didn't go well check the error log located, for me, on the C:\scom2012r2mmainstall.log
My issue: I don't see the management info in the Agent properties.
I installed this last night and waited until the next day still no changes. Event logs show the following:
Event ID: 2011 The Health Service did not find any policy in Active Directory
Event ID: 2003 No management groups were started. This may either be because no management groups are currently configured or a configured management group failed to start. The Health Service will wait for policy from Active Directory configuring
a management group to run.
I see the HealthService is Running in Task Manager on this server and of course I don't see anything listed in the Management Groups registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HealthService\Parameters\
I don't want to manually add the management group info. Checking as I may have missed something in one of the switches.
Any responses appreciated.

Want to uninstall Vista and install XP?

Similar Messages

Maybe you are looking for