Want to use a text as shape without convert to shape. is it possible?

I'm using PS6. Want to use texts as shape for path operations with custom shapes.
hope can explain my problem.

OK, we might be getting there. I'm guessing you want to remove the outline of a Type layer from  rectangular Shape.  Is that right?
Create your rectangular shape.
Create your Type layer
Align the two layers.
Convert the Type layer into a Shape layer.
You'll have something like this:
Select the two Shape layers and merge them (Ctrl e or Cmd e)
Which will give you a single shape layer but this in the paths panel
Use the Direct Selection tool (white arrow) to drag across and select the type oultine
Now select the Pen tool, and in the Options bar click on Path Operations drop down, and select 'Subtract front shape'
Which should leave you this (Note I have turn off the background layer for the sake of clarity)
I sure hope that is what you are after, because it took me twenty minutes to produce the above illustrations.

Similar Messages

  • Hi there, can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac Mini? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? Thanks in advance, Grtz T.

    Hi there,
    Can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac mini i7 using an Apogee jam as an input for bass and a Behringer USB DAC with RCA audio output? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? I'm also suffering massive audio lag issues with the Apogee jam after waking the mini from sleepmode, wich pretty much renders it useless.
    Thanks in advance,
    Grtz T.

    I think the easiest way to do this is to have the EyeTV app running in one user account and sent via HDMI to the TV, and use a separate user account for Screen Sharing. Both logins can be active at the same time and with Lion you can connect via screen sharing to which ever login you need.
    With regards to the Mac video resolution changing, when it is not the current input on your AV receiver. This is 'normal', if the Mac sees no signal it drops down the a lower level. What you need is to buy a HDMI Detective Plus which tricks the Mac in to always seeing a signal and hence it will not drop down the resolution. See http://www.gefen.com/kvm/dproduct.jsp?prod_id=8005
    The Mac mini does have an IR receiver. This can be used with the EyeTV app, iTunes, and similar. Yes I believe EyeTV would run for prolonged periods quite happily, it is has been around for a long time and had most of the rough edges polished off. However one issue you will have to deal with is that it does not automatically update its program guide data. For this you might have to write or modify an AppleScript. Elgato support or their user forums will be a lot of help.
    You can set EyeTV to convert recordings to an iTunes (Apple TV) compatible format and then delete them from EyeTV.
    The HDMI Detective should solve your handshaking problems.

  • HT2534 I have an apple ID. I want to use it for my itunes without my credit card info. How

    I have an apple ID. I want to use it for my itunes without my credit card info. How

    Creating an iTunes Store/App Store/iBookstore account without a credit card
    Please read carefully.

  • I did the 8.0.2 update and no longer have my speak to text microphone down by the smileys.  Don't want to use audio text.  How can I get this back?

    I did the 8.0.2 update and no longer have my speak to text microphone down by the smileys.  Don't want to use audio text.  How can I get this back?

    Hey there tjbliven,
    It sounds like you are not able to use the dictation feature of iOS 8, becuase the microphone icon is missing. It seems to me like Siri may be turned off, which would cause the icon to not be there:
    Siri settings - iPhone
    To set options for Siri, go to Settings > General > Siri. Options include:
    Turning Siri on or off
    That should get the dictation feature back for you.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Do I need to be online to use creative cloud? I want to use it in the field without internet connection.

    Do I need to be online to use creative cloud? I want to use it in the field without internet connection.

    Creative Cloud Help | Creative Cloud / Common Questions
    Do I need to be online to access my desktop apps?
    No, the desktop applications in Creative Cloud, such as Photoshop and Illustrator, are installed directly on your computer, so you don’t need an ongoing Internet connection to use them.
    An Internet connection is required the first time you install and license your apps, but you can use the apps in offline mode with a valid software license. The desktop apps will attempt to validate your software licenses every 30 days.
    Annual members can use the apps for up to 99 days in offline mode. Month-to-month members can use the software for up to 30 days in offline mode.

  • Both me and my wife have ipads and iphones. I want to use one itunes account for both of us. Is that possible.

    Both me and my wife have ipad minis and iphone 5. I want to use one itunes account for both of us. Is that possible.

    Plug one idevice in, choose what you want, sync.
    Plug the other idevice in, choose what you want and sync.
    Continue for all idevices.

  • WIP310 to use in a wifi network without VoIP ?? It's possible??

    I want to know if I can use the WIP310 to  communicate with each other in a WiFi network, without having PABX or  VoIP services similar assets.
    The WIP310 will be used by a hotel  manager to call the waiters.
    Thanks for  any response.

    Hi Stefano,
    Sadly, you will need some form of "call control-PABX" that is
    SIP capable
    http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps10033/ps10041/data_sheet_c78-502697.html
    Cheers!
    Rob

  • I want to use two keyboards, each with a different language. Is this possible?

    I work in Norway and use a Norwegian keyboard and keyboard layout for most daily activities. However, I code quite a bit and the Norwegian keyboard/layout is ridiculously inefficient for this. Is it possible to have two keyboards linked up to my iMac at the same time, one with a Norwegian keyboard and layout, and one with an English keyboard and layout?

    clevergoat wrote:
    Should also note, this is of course only useful if I don´t have to use a keyboard shortcut to switch languages as well. Cheers.
    Right, and that is always required.  Having two keyboards linked up is in that regard no different than just switching between Norwegian and English layouts on a single keyboard.
    I have read that the app Keyremap4macbook may be able to adjust behavior depending on the active hardware keyboard.  You may want to look at that.
    Or create a custom layout that gives you what you need for programming with the normal Norwegian layout using
    http://scripts.sil.org/ukelele

  • How can I use ONE Text search iView to event/affect mutliple Result Sets?

    hello everyone,
    i have a special situation in which i have 6 flat tables in my repository which all have a common field called Location ID (which is a lookup flat to the Locations table).
    i am trying to build a page with a free-form text search iView on Table #1 (search field = Location ID).  when I execute the search, the result set for Table #1 is properly updated, but how do I also get Result Set iViews for Tables #2-6 to also react to the event from Text Search for Table #1 so that they are updated?
    i don't want to have to build 6 different text search iViews (one for each table).  i just want to use ONE text search iView for all the different result set tables.  but, in the documentation and iView properties, the text search iView doesn't have any eventing.
    if you have any suggestions, please help.
    many thanks in advance,
    mm

    hello Donna,
    that should not be a problem, since you are detailw with result sets and detail iviews because custom eventing can be defined for those iviews.
    Yes, it says "no records" found because an active search and record selection havent' been performed for it (only your main table does).
    So, yes, define a custom event, and pass the appropriate parameters and you should be fine.
    Creating a custom event between a Result Set iView and an Item Details iView is easy and works. I have done it.
    See page 35 of the Portal Content Development Guide for a step-by-step example, which is what I used.
    For my particular situation, the problem I'm having is that I want the Search Text iView's event (i.e., when the Submit button is pressed) to be published to multiple iViews, all with different tables.  Those tables all share some common fields, which is what the Search iView has, so I'd like to pass the search critera to all of the iViews.
    -mm

  • How to use rich text?

    Hi All,
    I want dynamically to output in adobe print form some fields from a table in this way.
    Description:<b>Text1</b>
    <b>text2 text3</b>
    Description2:<b>Text2</b>
    Description3: <b>Text3</b>
    I want to use rich text but it does not work for me .
    Could anybody help me ?
    I appreciate any help.
    Regards,
    Ari

    I think you have to use floating filed.
    <i>Click inside the Static Text object in which you want to place the floating Text Field object.
    Place your cursor on the line where you want Designer to insert the floating Text Field object.
    Select Insert > Floating Field( from designer memu).
    To set the properties of the Floating Field, click the Floating Field marker inside the Static Text object, and then select options as needed. It is good practice to rename the floating Text Field object and specify the necessary binding.</i>
    in your case you have use 2 fileds , 1 for description , 1 for text.for 2nd field make bold in the properties.
    static text, description and text fields should be in subform.
    Inside static text filed,after binding it will appera as below.
    Message was edited by:
            pavan meda

  • Use of text symbol in webdynpro

    Hello
    I want to assign some text to a variable in webdynpro, that is not a screen field(just a normal variable).
    Instead of hardcoding the text I just want to use a text symbol. Should I go for assistance class or OTR?
    I tried using OTR.but it is not taking the value what I have stored.
    check the below..
    append 'Hello' to v_text.
    instead of the above i wrote it like,
    append text-001 to v_text, where text-001 is stored in OTR.
    but after executing, v_text contains no value, instead it should take 'hello'.
    Please help me out.

    Hi,
    Plz follow following threads.
    [Assign Text Symbols in assistance class directly to UI element properies]
    [https://forums.sdn.sap.com/click.jspa?searchID=19744239&messageID=6555655]
    I hope it hepls.
    Regards.
    rohit
    Edited by: Rohit Makkar on Dec 10, 2008 9:59 AM

  • Any description on how to use the Text Editor used for this Forum?

    I am very frustrated when trying to use the text Editing functions (without use of HTML, that I do not undertstand) that can be used to create Posts in this Forum .
    Can somebody point me to a good description of the Text Editor used to enter/edit Posts in this Forum? Thanks a lot in advance.

    Ian,
    Thank You very much for your answer.
    Based on your answer, I guess and fear, that there exist no "user guide" for this Text Editor.
    I will wait a little bit more to see whether I get more information/answers. If not, i will probably write a "Feature Request" to request that Adobe provides us or point us to a reasonable User-Guide for this Text Editor.

  • I have an IPhone 6 I'm going on a cruise and I won't be making calls or using data I'm just wanting to use the camera ...is there something I can do to to turn these off?

    I have an IPhone 6 I'm going on a cruise and I won't be making calls or using data I'm just wanting to use the camera ...is there something I can do to to turn these off?

    All you need to do is turn on Airplane Mode. It's in the settings, or the easier way is to swipe up from the bottom to open the Control Center and turn on Airplane Mode there. It's the first button at the top, with the airplane icon.
    When you turn on Airplane Mode all of your data is shut off. You can optionally turn on just Bluetooth and Wifi if you want; for example, if you wanted to use the cruise ship wifi without turning on your phone radio, or if you wanted to use a Bluetooth speaker or keyboard. But if you don't need all that just turn on Airplane Mode and leave Bluetooth and Wifi off.

  • Patches 7446163 y 6851110 in order to use Oracle Text from UCM

    Hello, we have Oracle Enterprise Edition 11.2.0.1 on AIX 6.1.0.0 (64 bits). The client want to use Oracle Text from Universal Content Management, he told me about install the patches 7446163 y 6851110 in order to enable Oracle Text from UCM. I reviewed in Metalink but the readme said that those patches are for Oracle 11.1.0.7. That version (11.2.0.1) include already those patches or those are necessary for we can use the funcionality of Oracle Text from Universal Content Management? I reviewed the components installed on database and the Oracle Text is installed and active.
    Thanks for your help.
    Sincerely,
    Ruben Nieto
    DBA

    Hi
    Oracle DB usually would be installed with Oracle Text enabled (the db side) . To use the features for this we need to have OracleText component enabled on UCM which as you mentioned is already installed and enabled on the ucm server .
    If both the above conditions are already met then you would not need to install any further patches.
    Let me know if it is fine on db and ucm .
    Verify that Oracle Text is enabled on db by executing the following query :
    select comp_name, status from dba_registry;
    It should return the the following result : Oracle Text VALID
    To verify if the component for UCM is installed then you would need to check Administration - Configuration for <instance name> - Enabled Components
    Thanks
    Srinath
    Edited by: Srinath Menon on Dec 26, 2010 8:38 PM

  • How to read the Key value from the Message using the text value.. Urgent

    I need to read the Key valuefrom the message pool using the text value for the Key.. Is it possible.. Please help me with sample code..
    Thanks and Regards
    Avijit

    Avijit,
    I got your requirement. I really dont know the scenario your working on but its possible to do it. There is no direct way to do so, but complexity is in getting to know the Keys dynamically from interface.
    Here you go..
         try
              Class msgClass      = IMessageTestWDApps.class;
    //Replace IMessageTestWDApps with IMessage<Your WD Component name>
              Field keys[]      = msgClass.getFields();
              IWDTextAccessor textAccessor = wdComponentAPI.getTextAccessor();
              if(keys != null)
                   String key = "";
                   for(int index=0;index<keys.length;index++)
                        key = keys[index].getName();
                        wdComponentAPI.getMessageManager().reportSuccess("Key= "+key);
                        if(textAccessor.getText(key).equals("My message text"))
                             //your logic.
         catch(Exception cnfe)
              wdComponentAPI.getMessageManager().reportException("Exe "+cnfe.getMessage(),false);
    Regards
    Abhilash
    Message was edited by:
            Abhilash Gampa

Maybe you are looking for