Want to use dotNet with teststand, but unsure how to send commands through serial port

I have a loCom communication dll used to send and recieve commands through serial comunication for a particular product.  I the past they have used a LabVIEW wrapper to send and recieve commands, using this particular dll.  I would like to just use testStand for the DOTNET Dll.  I can get the commands, know the inputs and outputs required, however I can not figure out how to send the commands to the serial port.  Anyone have any exprience doing this in TesSTand?

hallawt,
With your .NET code module, you should be able to call it directly, most likely as a parameter in the .NET method.
What are the inputs for the method you're trying to use?
Also, could you clarify where you're starting to have problems in your project?
Regards,
Renée M
Applications Engineer
National Instruments

Similar Messages

  • I have recently purchased Lightroom 4 and want to use it with Photoshop but my Photoshop is 7.0 ?

    I have recently begun using Lightroom 4 for digital photography.  I would like to integrate Lightroom 4 with Photoshop but my version is quite old  ie 7.0.  How shall I proceed. I am a faculty member at the University of Washington.
    Thanks
    John Olerud MD

    If the edit in photoshop doesn't work with ps 7 (might be too old) you'll probably have to specify an additional external editor for lightroom under
    Edit>Preferences>External Editing
    Photoshop 7 should work with lightroom after doing that.
    Anyway it does on a windows vista machine.
    more info from the lightroom help:
    http://help.adobe.com/en_US/lightroom/using/WSA810DC18-9A3B-4f2e-B09C-1C45DD1F8EDC.html

  • I want to use GPhotospace with Firefox, but after updating to 7.0.1 I cannot install it, because GPhotospace is not supported. Thanks for the help in advance!

    Main issue seems to be with the compatibility of Firefox 7.0.1 with GPhotospace 1.0.16.

    Hello Islamqatar,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/ts4429
    Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
    Turn iPhone off and then on again.
    Remove the SIM card and verify that it's a valid, carrier-manufactured SIM. Also verify that it isn't damaged, worn, or modified. Then reinsert it.
    Check for a carrier-settings update. Connect to a Wi-Fi network. Then tap Settings > General > About. If an update is available, iOS will ask you if you want to install it. If Wi-Fi isn't available, connect your device to iTunes.
    Update your iPhone to the latest version of iOS.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
    Restore the iPhone.
    Have a nice day,
    Mario

  • I have an itunes account on my home PC. I want to use my same account but on my laptop. How do i do this with out wiping out my phone and backing up all my Pictures and Apps? Please Help.

    I have an itunes account on my home PC. I want to use my same account but on my laptop. How do i do this with out wiping out my phone and backing up all my Pictures and Apps? Please Help.

    Copy everything from the old computer or your backup copy of your old computer to your new one.
    Type "move itunes library from pc to mac" or similar into the google search bar.

  • I have an iPod mini 6GB and want to use it with a Sony CD Boombox but the adapter is different. Can it work?

    I have an iPod mini, 6 GB and want to use it with a Sony CD Boombox but the adapter is different. Can it still work? Don't want to try and break iPod.

    Do you mean that the iPod mini won't fit on the "dock" because of shape (of the iPod), or is the docking connection a different type from the "30-pin" dock connector on the iPod mini?

  • My iphone 4 is from telus can, and i got the sim to activate it, but i want to use it with my att account.  how can i do this?

    hi my iphone 4 is from telus can, and i got the sim to activate it, but i want to use it with my att account.  how can i do this?

    contact telus as to how you get it unlocked

  • HT204053 hi i want to use find my mac but i got this massage (some configurations, such as software or hardware RAID,do not support a recovery partition and can't be used with find my mac)

    hi i want to use find my mac but i got this massage (some configurations, such as software or hardware RAID,do not support a recovery partition and can't be used with find my mac)

    hi i want to use find my mac but i got this massage (some configurations, such as software or hardware RAID,do not support a recovery partition and can't be used with find my mac)

  • I have just purchased an Apple Magic Trackpad. I connected it to my Macbook to test it. Fine. But I want to use it with my IMac - and my IMac cannot discover it - even though it is turned on and the batteries are 100%. Why?

    I have just purchased an Apple Magic Trackpad. I connected it to my Macbook to test it. Fine. But I want to use it with my IMac - and my IMac cannot discover it - even though it is turned on and the batteries are 100%. Why? Can I reconfigure it to the IMac?

    Remove it from the Macbook first. BT devices may only be connected to one thing at a time.
    Barry

  • I want to use 1 itunes account but with 3 different iphones 2 for the kids and one for me, what is the easiest way to do that?

    I want to use 1 itunes account but sync 3 different iphones, 2 for the kids and 1 for me.  So I would like to have different programs, songs, apps etc for each phone.  What is the easiest way to do that

    Agreed heather. Also, if you have three users on the same account how do you keep phone calls and messages from going to all three phones?

  • I want to make a slideshow to view on my television with image's duration ranging from seconds to an hour or more and I want to use my iPhone or iPad mini to control the television through my Apple tv.  I've been unable to locate an app that will do this.

    I want to make a slideshow to view on my television with image's duration ranging from seconds to an hour or more and I want to use my iPhone or iPad mini to control the television through my Apple tv.
    I've been unable to locate an app that will do this.  The Photos app that comes with the phone or iPad has extremely limited duration controls.  PhotoStream seems to load everything from my phone or iPad not allowing me to just load up a set group of images.
    iPhoto for iPad is getting some terrible recent reviews.  I tried a couple other free apps but they don't use Airplay.
    I can do something like this with iPhoto and my MB Air, but it's kind of ugly to have the computer open in order to connect by Airplay to my Apple TV.  I've thought the iPad or iPhone would be a lower profile controller.
    Am I out of luck?

    Thanks for your help.  Since I'm uninterested in loading all my photos (the only option) into photostream, I won't be able to use the settings in ATV.  I guess I'm just stuck with using iPhoto on my MB Air.  Thanks again.
    paul

  • No subscription found - want to use encore with premiere cc

    i have a cc subscription as a student and i want to use encore with premiere cc on a mac. i downloaded the cs6 version of premiere, tried to install but it says it can't find a subscription (even thought i am logged in with my adobe id).  I saw on another help doc that i have to obtain encore from cs 6.  I already have premiere cc installed and when i go back to the creative cloud apps i don't get the choice to install past versions of premiere. it just gives me the option to uninstall and manage app is greyed out.
    Can someone assist.  I just want to use encore with premiere cc.
    Thanks in advance.

    I have Creative Cloud Student and Teacher Edition (one-year) at a special rate of 17 a month.  It should be a complete plan.  I'll read the info at the link. Thanks. 
    Update: I did try using the instructions at the link which are as follows:
    To download and install previous versions of apps, such as CS6, do the following:
    Open the CC Desktop application and go to the Apps panel.
    Filter the apps by Previous Versions.
    Choose a version from the Install menu.
    But the only options i had for premiere were uninstall or manage.  i didn't see an option for cs 6.  I decided to try this link to download premiere cs 6 so I can elect to just install encore and the subscription wasn't recognized. Download CS6 products

  • I have got a 1500 Kinetic Systems CAMAC crate and 3922 controller. I want to use it with LabView inst

    alled in PCI-bus IBM PC, which does not have GPIB interface. Which way would be easier for developing my own instrument driver: a new GPIB controller + interface or 2915 Kinetic Sys. PCI-bus in-slot interface? Can the latter interface be used with LabView?
    Many thanks.
    Victor. I have got a 1500 Kinetic Systems CAMAC crate and 3932 controller. I want to use it with LabView installed in PCI-bus IBM PC, which does not have GPIB interface. Which way would be easier for developing my own instrument driver: a new GPIB controller + interface or 2915 Kinetic Sys. PCI-bus in-slot interface? Thanks

    alled in PCI-bus IBM PC, which does not have GPIB interface. Which way would be easier for developing my own instrument driver: a new GPIB controller + interface or 2915 Kinetic Sys. PCI-bus in-slot interface? Can the latter interface be used with LabView?Victor,
    I couldn't find an Instrument Driver for the 3932 crate controler. There is a driver for the 3988: http://zone.ni.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/045f8392cc4d1b01862568ab005fbb49?OpenDocument
    If you look at the driver it isn't too complex. Well ... actaully there are certain differences when using the 3988 GPIB controller that the driver takes care of that relate to correctly passing commands (FAN).
    If the 3922 controller is similar then maybe you can use the 3988 driver and modify it to meet your needs. I'm not familar with the 2915 Kinetic system so I'm not sure what would be easier.
    If you have a GPIB board, then you could try using the 3988 driver with your 3922 controller and see if you can modify the driver to get things to work.
    I
    've only used the 3988 and that was quite three years ago but it might be worth a try.
    Best of luck,
    Kamran - NI

  • I want to use hibernate with the tomcat

    I want to use hibernate with the tomcat server can it be possible and if yes then what is the stepwise way.
    Infact I know the java JSF but want to command on Hibernate plz help me.
    I'll be thankful to you.

    To be honest, I wouldn't even know where to start. Do you know what Hibernate does and how it works? Do you know how Tomcat works? All you'd need to do to combine those two would be to let Tomcat provide the DB connections for Hibernate, I suppose. Neither of those products are a topic of this board though.

  • Is OnLocation available with CC service? I want to use it with Adobe Story.

    Is OnLocation available with CC service? I want to use it with Adobe Story.
    I have never had a copy of OnLocation, but it looks to be a great way to manage Adobe Story and the workflow for shoots.
    Is there something else that is exports to that works similar to OnLocation?
    help

    I see that I can view Adobe Story in two locations of Premiere Pro. As a window and under File, Adobe Story (which is usually grayed out).
    I have exported the script as an .astx, Opened PP and clicked file, Adobe Story, Attach Script File ; then I am not sure what to do to see it.
    I clicked on Metadata but there is nothing there.
    The Window, Adobe Story shows dialog and scene no. and est duration. Is that all I should see? Why the Attach Script File option? And what about seeing the schedule?
    Thx Troy

  • Want to use Avira Browser Safety, but Firefox blocks me. Ist that Avira Browser Safety causing problems then?

    Want to use Avira Browser Safety, but Firefox blocks me.what kind of problems does Avira Browser Safety cause Firefox, for me to counterbalance chances and risks?

    Can you describe what error message you're getting, in the Add-ons Manager or elsewhere? Or whatever else lead you to believe Firefox is blocking something.
    I don't see anything related to Avira on the blocklist.
    * https://addons.mozilla.org/en-US/firefox/blocked/
    The only confirmed outstanding issue I can find is the following problem with page loading. Please do not post comments on bug reports unless you have technical details that would be relevant. See [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html Bugzilla etiquette] for details.
    * [https://bugzilla.mozilla.org/show_bug.cgi?id=844714 Bug 844714] - Avira browser protection reportedly breaks incremental page loading

Maybe you are looking for