Want to use Droid X2 as a wi-fi only device with no data plan

Hello,
How would I go about using my Droid X2 as a Wi-Fi only device? I want to downgrade to a 'dumb phone' but yet I would still like to keep the Droid X2 to play games, browse the Internet, etc. all over a Wi-Fi connection - essentially use it as a tablet.
Thanks in advance for any replies!

Just activate the basic phone on your line. This will automatically de-activate the Droid X2. You should still be able to use it as a wi-fi only device.
Be sure to log into your MyVerizon account to confirm that you no longer have a data plan associated with the line. It should be cancelled when you activate the basic phone, but you should check just to be sure.

Similar Messages

How do I change the icloud account on my iphone? I want to use the same account for all my apple devices (macbook air and imac and iphone). I can't see where I can amend the iphone account because it is in grey?

I want to use the same account for all my apple devices (macbook air, imac and iphone). I can't see how I can amend the iphone account because it is in grey? I also can't remember the password for this account so i can't even delete it and start again?
Help!
Thanks

Deleting an iCloud account only deletes it from the Device, not from iCloud. In iOS 8, the name of this setting changed to "Sign Out" as that is a better reflection of what actually happens. Your iCloud data remains on the server, available to devices still signed into the account, but the device you sign out of the account on is disconnected from the account, and as a result, the iCloud data from that account is removed from the device. It will redownload to the device should you sign back into the account.
The only issue you'll run into when you switch between accounts is with my photo stream photos older than 30 days. When you delete (or sign out of) and account, your photo stream photos are deleted along with the other data from the account in question. However, unlike other data which remains on the server and can redownload to your device when you sign back in, my photo stream photos only remain in iCloud for 30 days. When you sign back in, you will only get back my photo stream photos added in the last 30 days (as older photos are no longer in iCloud to redownload). Like other account data, any my photo stream photos on your other devices signed into the account are unaffected by this. If you want to keep older my photo stream photos on your device as you change iCloud accounts, save them to your camera roll before deleting (signing out of) the account.

2 New Ipads (Retina and Mini)(New to Apple) How do I share purchased apps, but others have each act independently? Mini is for the Wife the Ipad4? is for me. I want to use mine at work, etc. She's home with the kids. Can we set them up seperate, but share

2 New Ipads (Retina and Mini)(New to Apple) How do I share purchased apps, but others have each act independently? Mini is for the Wife the Ipad4? is for me. I want to use mine at work, etc. She's home with the kids. Can we set them up seperate, but share
--break--
So we are entirely new to Apple products. I'm an IT guy, but have always been a windows user.
So the Ipad with Retina Display is to be mine (and will use it at work for notes, organization, etc)
The MINI is for the wife.
But, are we allowed and can we.. buy an app and share that app between both devices? IE. Can I buy a copy of Angry Birds for the House and both Ipad's use that single purchase? and if so, can we still run the Ipads seperate other than to share the apps purchased. IE my facebook and email set up on mine and hers on her ipad mini?
When I finally find a note taking app I like, can I share it on her ipad, without her having all my work files, etc?
Thanks for helping out the apple noob. Hoping for a great experience, and anticipate droping $100 in apps the first day.. just don't want to do that twice. If this is against the usage policy, thats unfortunate but good to know. (I mean we can share stuff on PC as long as its in the same household)
thanks again (explanations or links are fine)

There are a number of Apple services: iMessage, FaceTime, iCloud, Game center, Find My iPad, etc.
Now, to share apps, music and books you need to have the same Apple ID:
iPad's Settings > iTunes & App Stores > Apple ID > Your purchasing Apple ID.
For the other service, your wife should have her own Apple ID.
All she needs is a valid e-mail address, apply Apple ID below:
https://appleid.apple.com
Here's a limk with useful tips: Note: It's also valid in IOS 6
iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

Hi All.. i want to use my iphone 4 to play poker on facebook with the zynga.. idont know the apps name,, thank's for ur help, and how to upgrade ios 4.3.3, now i'm still using ios 4.1.1, thank's

hi All.. i want to use my iphone 4 to play poker on facebook with the zynga.. idont know the apps name,, thank's for ur help, and how to upgrade ios 4.3.3, now i'm still using ios 4.1.1, thank's

when you connect your phone with your computer and use itunes you can click on the phone
and click on an update button
about facebook games then think they are all flash based and iphones cant do flash so thats not possible

I HAVE AN IPHONE 5S AND WANT TO USE SOFTWARE 7.0.2 BECAUSE IT IS COMPATIBLE WITH MY VEHICLE FOR UCONNECT. I CURRENTLY HAVE SOFTWARE 7.0.3 ON MY DEVICE. HOW WOULD I GET THE PREVIOUS SOFTWARE BACK ON MY PHONE

I HAVE AN IPHONE 5S AND WANT TO USE SOFTWARE 7.0.2 BECAUSE IT IS COMPATIBLE WITH MY VEHICLE FOR UCONNECT. I CURRENTLY HAVE SOFTWARE 7.0.3 ON MY DEVICE. HOW WOULD I GET THE PREVIOUS SOFTWARE BACK ON MY PHONE

Forum Tip: It is generally considered inappropriate to type all in uppercase letters in Internet discussions, as text that is typed all in uppercase is by convention considered to be shouting. Uppercase is also more difficult to read, so please use all uppercase sparingly and only when you really mean to shout, which we hope you won’t need to do here .
Regards.

I want to use Golden Gate to connect MS SQL Server 2005 with Oracle 10g dat

I want to use Golden Gate to connect MS SQL Server 2005 with Oracle 10g database. So, i have installed both databases on different pc's on windows platform. MS SQL Server 2005 on windows XP and Oracle 10g on windows 2003.
I have configure Golden Gate step by step by following oracle guideline:
http://www.oracle.com/technetwork/articles/datawarehouse/oracle-sqlserver-goldengate-460262.html
When i run following command on target (oracle 10g):
replicat paramfile dirprm/inload.prm
I encounterd following error:
2012-05-21 20:27:06 ERROR OGG-00014 Unrecognized parameter: USERID. Paramete
r could be misspelled or unsupported.
2012-05-21 20:27:06 ERROR OGG-01668 PROCESS ABENDING.
My INLOAD FILE Content are:
SPECIALRUN
END RUNTIME
USERID gg_user, PASSWORD welcome1
EXTFILE D:\oracle\gg\dirdat\ex
SOURCEDEFS D:\oracle\gg\dirdef\emp.def
MAP hrschema.emp, TARGET gg_user.emp;
Can you plz suggest me that where i am wrong?
Thanks advance to all experts.

amardeep.sidhu wrote:
That should work, just in case try adding DBLOGIN before USERID
DBLOGIN USERID x..No needed in the param file i think.its not needed at all you are right, but what else could it be? Besides any special unseen character :P

I want to use asus air charger to charge my ipad 4 with my computer. does this software harm my ipad battery?

Hi , I want to use asus air charger to charge my ipad 4 with my computer. does this software harm my ipad battery? can I use it? thanks

Look at this description and review. http://asus-ai-charger.en.softonic.com/
The app is free, So it won't cost to try. The iPad 4 comes with a 12W wall charger. Most computer USB ports output only 2.5W, so even if you get a 50% increase, it will still take a long time to charge your iPad.
Bottom line - Use the wall charger.
Here's some battery/charging info.
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

HT3728 I do not need another wireless network but want to use the airport express for printer access only. Can this be done and how?

I do not need another wireless network but want to use the airport express for printer access only. Can this be done and how?

You can configure the AirPort Expess to "Join a wireless network" and enable the Ethernet port so that Ethernet devices will be able to connect.
In order to print from the iOS devices, you will need to have an application like Printopia installed on your Mac. The Mac must be active when you want to print.
More details here: Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
There is a free trial available for Printopia, so make sure that it will work before you buy the AirPort Express.

HT4157 I have an iPhone with a data plan through AT&T. I just got an iPad. Do I need to set up a separate data plan, or can I use my iPad under the plan I have set up for my iPhone?

I just got an iPad, and am trying to figure out how to get it going. I have an iPhone with a data plan through AT&T. Do I need to set up a separate account for the iPad, or can I use it under my existing data plan?

You need a completely different data plan for your iPad which you set up on the device itself and it is billed to a credit/debit card. You cannot share other plans and the iPad account will not appear on your iPhone or any other AT&T account.

I am facing 'How do you want to use this disc' whenever I read/open any lightscribe discs having data.

Hi,
When I insert a lightscribe DVD/CD into a lightscribe optical drive, then when I click to open the DVD, I faced this error 'How do you want to use this disc', although the DVD was full of data. When opening these
lightscribe DVD/CD via NON lightscribe optical drive, I noticed that the DVD/CD opened well without any problems at all.
Also, how can the System show to me 'How do you want to use this disc' , in particular when a DVD is non rewritable(DVD-R) and also contains data)?
Bear in mind, not all DVDs/CDs were not detected. However, only full lightscribe discs' (having data)
However, even blank lightscribe discs were detected without problems. When insert a lightscribe disc having data, then I faced that error. However, when inserting blank lightscribe discs I found that the disc were opened. Also,
non lightscribe discs were opened well.
When checking the device manager, I didn't see any issue with DVD/CD drive. If there were a problem unrecongnising, then I would have seen 'a remarkable mark' in front of it.
Note: I have faced this problem after trying formating a rewritable CD inserted onto the drive. Althouthg the format failed, all data on the disc was deleted. Anyway, after that, then inserting full-lightscribe discs are unregonised
Do you think the problem wth my optical drive. IF so, I would be saying why it wasn't happened with all other non lightscribe discs. If my lightscrib discs were corrupted, then why would they have opened well on another laptop.
I have done:
Press the Windows logo key+R to open the Run dialog box.
Type devmgmt.msc in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
In Device Manager, expand DVD/CD-ROM drives, right-click the CD and DVD devices, and then clickUninstall.
When you are prompted to confirm that you want to remove the device, click OK.
Restart the computer.
But the same prolbem is existing.
yes there is a virtual CloneDrive program installed on my PC, however, there is no any CD mounted into it. Even if a CD was mounted into Virtual Clondrive, there would be no problem at all, because the virtual CloneDrive is used to only
mount ISO disc images into it, and not physical discs.
Any I have do what you have said, when inserting a light-scribe disc having data, then I open it, I found this
NOTE: in the above screen shot there is a lightscribe DVD having data inserted. However, in the screen shot below, there a ightsrbe DVD not having data inserted. In the first screen shot, the disc is not reconginsed by Windows, however, in
the second is recognised.
Even when I have inserted a lightscribe disc not having data(empty), it opened well regardless of what virutal CloneDrive is enabled or disabled.
But when cliced on my problem didn't solve,
A man should convert his anger and sadness into strength to continue living in this life.

Hi,
The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
Notebook PC support
The number of my computer is : LM610EA#A2N.
Could anyone please at this splendid forum take some of their precious time
out to really reply my questions and solve my problems?
FIRST OF ALL:
My HP Pavilion Laptop is about 3 years old.
My
sister's Dell Inspiron laptop is 3 years old.
My HP lapotp is well-cared, as opposed to my sister's Inspiron Dell laptop,
which is always thrown in dust without caring at all. Also, its battery is
always inserted even when it is fully charged while the laptop is plugged in to
the main power supply.
However, my laptop is either used on only battery, or on plugin. Also, it is
kept from the dust.
But, I really found that the battery of the Dell laptop
still lasts about three and half hours, and there is no problem cooling fan is
not oproperly preporly.
I only remember one thing differently done on my laptop battery which is I
charged it fully, then I stored it without using it for about four months, then
when I reused it, I found it got worse over time. I.e. first time of using it
after storing,I found it empty, then I charged it again fully, however, then it
lasted about 2 hours, then 1 and half hours, next an hour, now it is only
lasting about 20 minutes without performance. If there is high performance, then
the computer shuts down suddenly.
My problem is follows:::
First: Whenever I inserted any Containing Data OR Data
CD/DVD-R LightScribe discs, I found that HP optical driver was
unable to read them. When clicking on the optical disc drive
'duble-click', then I find that disc opens as this way(NOT: With a CD/DVD player
is grayed out)
Blank Or Used CD, DVD±R,RW lightscirbe is unable to be
read:(clicking on it let it Open like a USB FlashDrive or With a CD,DVD player:
NOTE: with CD/DVD Player is grayed out)
Used CD/DVD±R/RW Non-LightScribe disc opens normal:
Blank CD,DVD±R,RW Non-LightScribe opens normal(Opens like a USB FlashDrive or
With a CD,DVD)::
My HP CD/DVD DVD±R/RW specis are::
Optical Drives
hp CDDVDW TS-L633R
Media Type DVD Writer
Name hp
CDDVDW TS-L633R
Availability Running/Full Power
Capabilities Random
Access, Supports Writing, Supports Removable Media
Read capabilities CD-R,
CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
DL, DVD+R DL
Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
DVD+RW, DVD-R DL, DVD+R DL
Config Manager Error Code Device is working
properly
Config Manager User Config FALSE
Drive E:
Media Loaded
FALSE
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 0
SCSI Target Id
1
Status OK
Trying to solve the problem,
I have done these steps in order::
I tried checking with dignostic ulitiy:
I have tried Advanced View , this is the file of output data
diagnostic utility
LightScribe System Software Settings:
SOFTWARE\LightScribe\MessageDir
C:\Program Files (x86)\Common
Files\LightScribe\
SOFTWARE\LightScribe\LSPrintDialog C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintDialog.exe
SOFTWARE\LightScribe\LSPrintingDialog
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintingDialog.exe
SOFTWARE\LightScribe\LsPrintLauncher
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintLauncher.dll
SOFTWARE\LightScribe\ResourceDir
C:\Program Files (x86)\Common
Files\LightScribe\res
SOFTWARE\LightScribe\LSPrintAPI C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintAPI.dll
SOFTWARE\LightScribe\Update\UpdateShellCommand
http://www.lightscribe.com/go/downloads/windows
SOFTWARE\LightScribe\Update\PreviousVersion
1.18.20.1
SOFTWARE\LightScribe\Update\CurrentVersion
1.18.27.10
SOFTWARE\LightScribe\Update\TrailingVersion
SYSTEM\CurrentControlSet\Services\LightScribeService\Type
16
SYSTEM\CurrentControlSet\Services\LightScribeService\Start
2
SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl
0
SYSTEM\CurrentControlSet\Services\LightScribeService\
SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName
LightScribeService Direct Disc Labeling
Service
SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName
LocalSystem
SYSTEM\CurrentControlSet\Services\LightScribeService\Description
Used by the LightScribe software components to support 3rd party disc labeling
applications using the LightScribe COM Application Programming Interface
(LSCAPI). This service needs to run for LightScribe direct disc labeling to
work.
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported
7
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0
IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1
SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Winlogon\allocatecdroms
0
SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
SOFTWARE\INTEL\Intel
Application Accelerator Not detected
Drives and Media:
Drive 0 : hp CDDVDW TS-L633R 0300 219 (E, Media
Imaging Parameter : 114
I tried running the below command line to fix potential disk issue 'Chkdsk
/r /f'
I cleaned the drive, discs, and so on.
I have uninstalled the all third-party data recording software.
I have uninstalled the Cyber DVD suite, lightscribe system software which
came pre-installed with my HP pavilion Notebook.
I have recovered my system from the Factory Recovery discs.
I have tried opening all those LightScibe discs not opening on my HP optical
drive, on a Dell optical drive, and all of them were opened well, although Dell
optical drive did not have a lightscribe feature at all., nor third party disc
recording software
However, the problem is still with opening the discs LIGHT-SCRIBE
Thus, my questions are:
How to determine if the drive is corrupted and needs to be replaced with
another one.
I think there something needed to be done on the BIOS Of my HP
laptop[[[A similar problems happened on my Desktop computer's optical
drive which is as follows:::(ALL discs are opened as empty by Optical Drive of
My Desktop Computer) ---while my optical drive of my desktop was connected to
the primary slave IDE, and the HDD was connected to the
primary master IDE, the optical drive and hard disk are functioning
well. However, I remember that while burning an image with Nero essential V: 5,
something went wrong, and then the Optical Drive of My Desktop Computer
(HL-DT-ST DVD-RAM GH22NP20) became NOT recognised/Installed on
BIOS, although it was still shown on the device manager as a
recognised device. Also, it was listed on my computer, however, when entering a
disc(blank or with data) into the drive, I found it was not recognised, and it
opened empty(no files at it), although it contains data. Thus, I decided to boot
to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was
still shown as installed on BIOS. However, the optical drive was not. Th I tried
clicking on it on BIOS and then clicking on 'enter' to try to let the device be
re-recognized. However, that made no difference. I had to take part my computer
,and then reconnected the optical drive onto the secondary slave
IDE , and let HDD connected to the same primary master IDE.
Then, I found that the problem solved and all discs became being read
normally. Aslo, optical drive became installed on BIOS]]]
What is meant with with double Layer Support.
How much does it cost?
A man should convert his anger and sadness into strength to continue living in this life.

WANT TO USE WEBLOGIC 10 R3 AS WEBSERVER FOR ONLY ROUTING HTTP REQUEST .

Hi ,
I have a requirement which I have to address ASAP . Any help would be appreciated .
I want to use weblogic 10 R3 as web server. I understand by the definition of application server that it’s also capable of handling HTTP request . That means it’s having a build-in webserver in it. (Please correct me if I am wrong in my understanding .) Thus can I use the weblogic webserver for hosting all incoming http request and routing to the another instance of weblogic application server. (Could be the same instance also if possible .)
I also understand that weblogic app server can be integrated with other third party web server like apache web server . But is it not possible to use weblogic 10g webserver ? If this is possible please guide me how I should proceed for this.
With Regards
AD

Hi ,
I am rephrasing my query as below:
It’s my understanding that weblogic 10g R3 application server is capable of handling http requests also . That means it has a built-in webserver. Thus can I use this built-in weblogic webserver for hosting all incoming http requests and routing to the another instance of weblogic application server.
With Regards
AD

Want to use Time Machine as wireless back up only - no internet

Im searching everywhere and unable to locate how to set up my TM as a wireless back up only. Im already hooked up to the internet and only want to use the backup feature in TM. Can someone give me directions or point me to the thread? thanks

Welcome to the discussion area!
By TM, I take it that you mean Time Capsule, correct?
If you want to backup using wireless only to the Time Capsule, you have two basic configuration choices to consider:
1) Connect the Time Capsule to your existing wireless router using an ethernet connection, and turn off the wireless on the Time Capsule. Backups will occur over your current wireless network. For most users, this is the easiest and most reliable way to configure a Time Capsule for back ups.
2) Configure the Time Capsule to "join a wireless network". In this configuration, the Time Capsule can be located virtually anywhere that it can receive a good wireless signal because it becomes in effect, only a wireless backup device.
Configuring the Time Capsule to "join" a wireless network can be quite tricky, even for experienced users because you must know the exact type of security the wireless network is using. It sounds simple, but different manufacturers use different names for the same thing, and it can be a challenge to get the device configured correctly without multiple tries. If you already have an Apple main router, this will be much easier to configure.
Post back for more details.
Message was edited by: Bob Timmons

HT3728 i want to use my time capsule for back-ups only and not connect it to the internet

I live in digs and with perfectly good wi-fi. Therefore, I simply want to use my Time Capsule for backing up my iMac. Airport Utility doesn't seem to want to let me do this and insists I connect the unit to the internet first.

I gave full info for how to do this setup in this thread with screen shots..
https://discussions.apple.com/thread/4817218?tstart=30
Any of it you don't follow just ask.
The TC is really a complex thing to use, when you don't do it as Apple designed it.. and in fact on your iMac an external drive will be cheaper, faster and more reliable than a TC. But I guess you already have it so may as well use it.

I want to use my Personal Laserwriter, but it won't work with my imac

I have a personal laserwriter printer. It work great with my older mac - Performa 580CD. However when I tried setting it up with my imac - using a MacOS 9.X driver and usb-serial adaptor - it only works with OS 9.x softeware.
So I have a laser printer that I cannot use. I'd like to get it up and running for my MacBoo Pro, too. Any advice?

The personal LaserWriter NTR and the Personal LaserWriter 320 are Postscript level 2 printers that can run with the built-in Mac OS X Drivers.
What is missing is a way to make the connection to recent machines that do not have a Printer/Modem/LocalTalk port. You can use the Mac's Ethernet port to carry AppleTalk packets (in addition to the standard TCP/IP packets) and use a converter to bridge from Ethernet to LocalTalk.
Two converters are available on the used market: The Farallon EtherMac iPrint LT and the Asante Asantetalk. The Asante may also be available new, but at a cost near US$100 new, you could get a more capable used Ethernet-capable printer for the same money.
If you have an older Mac that has a Printer/Modem/LocalTalk port and an Ethernet port and is still running OS 9 or earlier, you can download a package called LocalTalk Bridge to run in the background and do the conversion.
The other Personal LaserWriters would require a bridge AND a third-party driver.

Can I use Apple TV with unlimited data plan for my IPad without any other internet connection?

I Live in a weird area with no hardwired internet connection.
My only internet connection is my iPad Air's UNLIMITED DATA plan from AT&T... It's LTE and it works great for my usual work.
i Want to cancel stupid Direct TV acct and use Apple TV instead...
IS it possible to subscribe a TV account online by using my ipad air's unlimited data plan and watch in on my TV via Apple TV without using any other type of home network account?

If you intend to use your iPads data plan then that will require use of the tethering/hot spot feature. As I said, you will not be able to use airplay, that needs a wifi LAN (home network). This may change with IOS 8, but won't know for sure until the release.

Want to use Droid X2 as a wi-fi only device with no data plan

Similar Messages

Maybe you are looking for