Want to use external drive for new Mac, fresh iTunes

So I recently got a new Mac and have not transferred any music to it yet. In fact I haven't even launched iTunes. I want to store all of my music and play it from an external drive. I have found articles detailing how to transfer your library from your internal drive to an external one but I don't have an internal library of music on this machine. How do I set up iTunes to play from an external library for the first time? And how do I add my backed up music from my previous iTunes to that external drive's new music library? Do I just drag the files into the folder and hope iTunes will recognize them?
Thanks!

okay, i had to collect my thoughts for a moment
... but I don't have an internal library of music on this machine.
is *this machine* the new Mac ?
How do I set up iTunes to play from an external library for the first time?
the files will have to be added to iTunes. however, with the correct settings, they can be put straight on the external.
in order to set up iTunes on the new Mac, you will have to launch it. with the external drive mounted on your new Mac's desktop, go iTunes > preferences > advanced and point +iTunes media folder location+ to the external. this will cause iTunes to put all newly added content in that location.
also on the advanced tab, check +keep iTunes media folder organized+ and +copy files to ... when adding to library+.
And how do I add my backed up music from my previous iTunes to that external drive's new music library?
did you back up the music to disk ? if so, you should probably authorize iTunes with your iTMS account details, then just pop in the disk(s) and add the content to your library.
if you have backed up to an external HD, use the +add to library+ command from the file menu and navigate to the folder containing your media files.
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

Similar Messages

Old computer dying want to use external drive with new laptop ........... HOW ??

need to get laptop to run my iTunes library from old dying comp. Have a 500gb external drive but what do i do ??

okay, i had to collect my thoughts for a moment
... but I don't have an internal library of music on this machine.
is *this machine* the new Mac ?
How do I set up iTunes to play from an external library for the first time?
the files will have to be added to iTunes. however, with the correct settings, they can be put straight on the external.
in order to set up iTunes on the new Mac, you will have to launch it. with the external drive mounted on your new Mac's desktop, go iTunes > preferences > advanced and point +iTunes media folder location+ to the external. this will cause iTunes to put all newly added content in that location.
also on the advanced tab, check +keep iTunes media folder organized+ and +copy files to ... when adding to library+.
And how do I add my backed up music from my previous iTunes to that external drive's new music library?
did you back up the music to disk ? if so, you should probably authorize iTunes with your iTMS account details, then just pop in the disk(s) and add the content to your library.
if you have backed up to an external HD, use the +add to library+ command from the file menu and navigate to the folder containing your media files.
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

In the Mac side of things, backups usually come in two flavors: clones or incrementals.
A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
Holler if you need specifics on how to do each. This was just an executive summary.

Use external drive for windows and mac

Hello,
I just bought a external 320Gb Western Digital Drive. I would like to use
the drive for windows and mac.I will not like to make partation on the drive
to use it on both operating systems. Is there any formating system with which i can use in both operating systems? I would like to use time machine feature on that drive also.
Thanx.

If you want to use a disk for both PC/Mac file storage and Time Machine, you will have to create two partitions. Partitioning is sort of like creating multiple virtual disks on the same physical disk. One partition should be formatted for PC (which the Mac can also use) and the other should be formatted for HFS+ (Mac only) which is what Time Machine requires. The Disk Utility application makes partitioning and formatting very easy.

Using external drive for MacBook that was previously used for PC

I can't be the only person who'd had this issue...but I can't seem to find anything about this problem.
I have an external drive that I was using for my iTunes library on my PC. I recently upgraded to a MacBook. I was hoping to continue using my external drive for my iTunes library. When I plugged the external drive into the MacBook, it characteristically made my life very easy by quickly setting up itunes for me. It wasn't until the next day I realized that my entire library had been copied from the external drive onto the MacBook hard drive. This was not my intention.
It seems, however, that though my nifty new MacBook can easily read and use any files from my old external drive, it absolutely will not write to the external drive. In fact, even though I've repeatedly changed my iTunes settings to use the external drive for the iTunes library, it continues to write CD's onto the Macbook hard drive.
sigh
I'm very worried that:
1. I've now used 4 of my 5 "authorized" machines
2. I've used another move that I can make with the music I've purchased on iTunes and I will now have to use yet another move in order to make this right
3. I fear if I back up my music now, because of 1 & 2 I will lose my rights to some of my music.
If anyone has any help for any of these issues I would be very grateful! This is my first Apple in about 20 years, so be gentle!

martinifontaine wrote:
It seems, however, that though my nifty new MacBook can easily read and use any files from my old external drive, it absolutely will not write to the external drive.
i'm guessing this is a NTSF formatted drive. in order for your Mac to write to it, you need to install e.g. NTFS-3G
In fact, even though I've repeatedly changed my iTunes settings to use the external drive for the iTunes library, it continues to write CD's onto the Macbook hard drive.
above will probably take care of that
I'm very worried that:
1. I've now used 4 of my 5 "authorized" machines
you can deauthorize the PC if no longer in use. also, once you've reached the "5-computer" limit, you get the option (once per year) to *deauthorize all*, then reauthorize those in use. click here for information.
2. I've used another move that I can make with the music I've purchased on iTunes and I will now have to use yet another move in order to make this right
not sure what you mean by move.
3. I fear if I back up my music now, because of 1 & 2 I will lose my rights to some of my music.
no. you can transfer purchased content between authorized machines as much as you want. see _*iTunes for Mac: How to copy purchases between computers*_.
JGG

Use external drive for Time Capsule backups AND file storage?

I have an external drive formatted by my MBP. I'm using it to store my iTunes music library and iPhoto pics. Can I use the drive for Time Capsule backups as well?

Yes, but that is not recommended. Storage and backup should be kept separate to reduce the chances of a disk failure. This is especially important because you cannot even partition a Time Capsule drive. Go get a separate drive for your storage needs. Get another drive for a second backup and use a different method of backup than Time Machine

I am using external drive for iTunes why does it put art on internal

I have my itunes library on an external drive which works quite well for the most part. However it keeps recreating an itunes folder and subfolders on my internal drive mainly artwork and .itdb, .itl and .xml files in user/music/itunes. this is quite annoying because I am trying to keep as much data as possible off my internal drive for space considerations. I have tried deleting these files but itunes just recreates them. Does anyone have any ideas?

pharmercist wrote:
Solved the problem. When I initially moved itunes to the external drive I copied the entire iTunes folder and seleted the appropriate library drive in preferences
This is not the correct way to do it.
This still uses the iTunes folder on the internal for the iTunes library file, artwork etc.
Holding Option and Choose library... tells iTunes to use everything in the iTunes folder you select.
Holding Option and Choose library... you do not need to change the Tunes prefs > Advance - iTunes media folder location.

Use external drive for both Time Machine and storage for Back to My Mac

Hi all,
I have been "a Mac" now for over a year and just keep finding cool new things that make me happy I switched. The latest thing is Back to My Mac offered with my Mobile Me account. With a rather convoluted mix of PC/Mac/iOS devices to manage - best $99 I ever spent btw...
I also have a 1TB Time Capsule that I have been using with Time Machine to back up all four of my Mac computers at home. Needless to say, the 1TB is really struggling to handle the amount of data being backed up and certainly leaves no room for anything else.
What I wanted to do was to attach a larger external hard drive via a powered hub to the USB port on the Time Capsule and use it for Time Machine backups while using the internal 1TB drive with Back to My Mac so that I can have remote access to all my data from anywhere without having to leave my computer running at home all the time in order for my laptop to "see" it when I'm away. And, yes, the amount of that data far exceeds what any level of Mobile Me subscription can offer! I should also mention that the hard drive is the only USB device connected through the hub to the Time Capsule at the moment. There are no other devices that might be "getting in the way".
I'm thinking maybe all this is asking too much without the addition of a dedicated file server (Mac Mini, perhaps - not a purchase my budget wants to make).
I understand that the Time Capsule doesn't support partitions, so I bought a Western Digital 2TB Elements drive, connected it to my Macbook Pro and used Disk Utility to reformat the drive from the incompatible NTFS it shipped in to a single, Mac OS Extended (Journaled) partition. I then made two folders on the drive, one for Time Machine backups and one for Back to My Mac remote storage/access. Great.
However, when I connected the 2TB drive to my Time Capsule I could not see it at all. Time Capsule was reporting problems in the way of a disk error. From within my Airport Utility, I could see the trouble was the external drive. The utility suggested connecting the drive to a Mac and using it's Disk Utility to troubleshoot.
I followed through, checking the disk, etc. and ended up reformatted the drive on my Macbook Pro yet again with the same specifications as before but without the folders and reconnected it to the Time Capsule. Same deal. But now, I can't even remotely connect to the Time Capsule at all. I can see the Time Capsule in the shared area of my Macbook's Finder but can not connect. The connection tries and fails even before it gets to asking me for username and password credentials.
Long story short, first of all, I suppose I would like to know if I'm asking for the impossible?
Second, if what I want to do *is* possible, what steps do I need to take to make it so?
Thanks in advance for any advice or suggestions you might have.

Well, I have now reformatted/partitioned my poor WD Elements 2TB drive about a dozen times as well as restarted my 1TB Time Capsule so many times it's no wonder it's as confused as I am! <G>
Last night, at your suggestion, William, and in respect for your continued support, I tried creating two 1TB Mac OS Extended (Journaled) partitions on the WD external USB drive, both with GUID partition tables. Both volumes mounted to my laptop's desktop flawlessly and without issue.
Once the external drive was connected to the Time Capsule, however, it was a crap shoot as to whether or not the drive was recognized at all, reporting a problem with the disk, or, even at one point, mounting one of the two volumes but not both. <sigh>
I read somewhere on the Internet that you need to restart the Time Capsule for volumes on an external USB drive to be recognized.
So I tried that. I connected the freshly partitioned/formatted disk to the Time Capsule and restarted it. This succeed in removing the issue of reporting a nameless drive with a capacity of 0MB. It then reported the drive with its correct name but would not recognize whatever volumes in whatever partitions that particular crack at it contained with the exception of the once, as I mentioned above, when only one of two volumes mounted correctly and was listed with the right name and capacity on the Time Capusule's Setup's Disk tab.
At this point I have given up on my goal to use the external drive with Time Machine to back up my Macs or to hope I will ever be able to see its contents remotely via Back to My Mac. All I would like to do now is simply find a reason why I can't get it successfully connected and playing nice with my Time Capsule in the first place!
Any further suggestions or advice as to what steps I might take next would be greatly appreciated.
Thank you all.

Transferring music to new mac air using external drive: next steps after copying iTunes file to music folder?

I've followed instructions to consolidate, copy to external drive, then copy iTunes folder to Music folder on new mac air. so...
1. what do I do with original iTunes folder?
2. how do I get iTunes to read/ingest playlist and songs?

Exactly what steps did you follow?
1. what do I do with original iTunes folder?
It's on your old computer.
What do you want to do with it?
2. how do I get iTunes to read/ingest playlist and songs?
If you copied the entire /Music/iTunes/ folder from old computer to /Music/ on new computer then you simply need to open iTunes.
Since it is the exact same library, everything will be there as it was on old computer.

Partitioning an External Drive for a Mac

Hi there, I have a 300GB external Seagate hard drive. I'm connecting it through FireWire. I want to partition my drive in 2 partitions. Each 1/2 (150GB). 1 for Windows (Fat 32) and one for Mac (?)
I already have the Windows Partition finished, and put some files on it which I don't wish to have to copy over again. (It took a long time.)
In Disk Utility on my Macbook Pro, how can I take the empty space (150GB) on the drive, and partition it so my Mac can use it? I do not know which disk format to use. Journaled, or Extended? I just set it to Extended as a guess, and when I click partition, it says it will wipe the entire volume. What do I do?

Well, there's definitely a communications problem here. AFAIK, when you select DU's partition tab, it shows the current partitioning state. On a new HD, that's one. If you create multiple partitions, then they're created. If you didn't create the second partition, then, as Kappy stated, you need to start from scratch and create the partitons at the same time.

USB External drive for PC & Mac Via Home Hub 2

Hi Guys,
I have a home hub 2.0, I also have a 1TB External USB drive, I have connected the drive to the USB port on my Hub and I can see the drive on my pc, wirelessly (Windows 7), I know nothing abouy MAC's, but my wife has one and it would be great if we can both use the same drive, I think I will need to reformet the drive when it is plugged into her MAC into some MAC Format (?), I am happy to do that, but will both my PC and her MAC be able to access the drive?
Thanks
Steve

Hi steve,
As nobody else has posted I've decided to step in with a bit of advice, limited though it may be on Mac's
You can map your network drive to the Mac as well as your PC; I don't think there's a specific file format you need to have your hard drive formatted to although I've read reports of Mac's having problems with NTFS - FAT32 apparently works fine. The link below should help you map the drive to your Mac - as far as I'm aware, the IP address assigned to the USB slot on the Homehub is 192.168.1.253, so enter this when prompted for an address/location.
http://osxdaily.com/2010/09/20/map-a-network-drive-on-a-mac/
Give this a go and get back to us to let us know how you get on, it might prove useful for other users (if it actually does work!).
Dean
BTCare Community Mod
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Using external drive for itunes

Hope someone can help with this: I am going travelling and want to take my music library, at present in itunes on my desktop G4. I have copied this library onto a 100GB portable hard drive, and would now like to get itunes on my macbook to refer to this library on my hard drive. I tried going to preferences and changing the itunes music folder location to
Lacie Drive:music:itunes:itunes music:
but after I okay this, nothing happens, the itunes on my macbook is still full of the few songs I have put there, and no sign of the 2.99GB of music that I copied off the G4.
Ideally I want to keep the hard drive of the macbook as empty as possible, so would like to use itunes just from the external drive, plugging it in whenever I want to use itunes.
Many thanks,
Hugh
G5, macbook pro, G4 Mac OS X (10.4.7)

By changing the location, you only told iTunes where to store the next ripped CD or purchased music. iTunes doesn't know where your music is.
The song locations are stored in the 'iTunes Library' file.
If you're using iTunes 7, there could be an easy fix.
First, copy the entire iTunes folder from the G4 to the external drive (not just the iTunes Music folder inside it).
Then connect the drive to the MacBook and hold the Option button down when you run iTunes. Keep holding it down until a window pops up that lets you choose a library (or create a new one).
Choose the iTunes folder on the external.
iTunes now should recognize it.
Hope this helps.
M

How to move iPhoto Library from external drive to new mac?

I have exported a copy of my iPhoto Library from my old mac to an external hard drive. How can I import entire library into iPhoto of new mac? When I click Import to Library, I'm unable to highlight iPhoto Library file listed on my external hard drive in Finder. Any suggestions? Thanks.

Is the iPhoto library on the new computer empty? If it is, quit iPhoto and just drag the iPhoto library on the New Computer to the trash and drag the iPhoto library from the EHD to the pictures folder on the new computer - there is no importing involved - you NEVER want to import an iPhoto library into another iPhoto Library
If you want to run the new computer with the iPhoto library on the external drive simply launch i{Photo while depressing the option (alt) key and use the select library to point to the EHD
LN

Need very large and quiet external drive for my mac mini

Hi, I already own a LaCie Bigger Disk Extreme 1TB triple interface drive.
the problem though is that it is extremely loud.
can anyone recommend an external hard drive as large or at least a 500 GB drive that's reliable and more importantly quiet.
thanks in advance

can anyone recommend an external hard drive as large
or at least a 500 GB drive that's reliable and more
importantly quiet.
Not quite what you asked for but this really is better...
Buy a PC box. Find one that is dead quiet and has a large number of disk drive bays. I have an Antec "Sonata" with a
2.4Ghz Pentium on an Asus M/B inside. The sonata is a
full sized tower and makes about is much noise at a Mac
Mini. Load the box up with up to 6 disk drives.
Next install Linux and use NFS to export the file system
to the Mac(s) (OK if you don't like Linux use Apple's
"darwin" as the two are nearly the same thing) What you've
got now is a "file server" which has much more functionalliy than a firewire disk drive. For example it can serve
the same files to 100 Macs and it can have it's own RAM cache and do RAID. You want "quiet" put the file server on the end of a 100 foot long Ethernet cable and put in in a closet. Darwin/Linux/BSD is happy to be "headless"
(that means run with no monitor/keyboard/mouse.)
Once you start takling "terabyters" you really should start
thinking about file servers and RAID and backup
It can be fast too. The server can make use of as much
RAM as you want to use as a cache, the RAID caclulations
and RAID multiple writes are done on the server
Apple has it's own storage system but it's middle four
digit price tag you can build the same thing with the
Antec Sonota box and common parts
My setup works well. The Seagate SATA dives are faster
than the Mini's internal drive but the Mini only has
100BaseT Eithernet. So that becomes the bottleneck.
I have yet to try to setup a firewire network between
the server and the Mini. It could be done but I'm not
motivated. 100BaseT works well enough

How to use External Drive for Users Directory

I just did a clean install on my Mac Mini - I have over 4 TB of storage attached, but the main drive (160 GB) keeps filling up. What is the best way to have the Users directory located on an external drive?
Thanks for your help,
Chris

Think about it for a second. What would happen if that external drive wasn't connected for some reason? Maybe it died the night before, as external drives have a habit of doing. How are you going to log into the system?
If the main drive is filling up, it says that you aren't making effective use of the attached storage. There's nothing saying you have to keep video files in the Movies folder, and music in the Music folder, etc. Find some things, that aren't your user profile, and move them to your external storage. Or consider putting in a larger internal drive.
< Edited by Host >

Want to use external drive for new Mac, fresh iTunes

Similar Messages

Maybe you are looking for