Want to use iMac G5 LCD as PC monitor

Hello, here is my problem:
I have iMac G5 that I can't use it (logic board problems, can't finish OS installation) but LCD works just fine! Inverter works fine too.
I want to use iMac LCD instead of my regular (still CRT) monitor.
My question is: is it possible to cut off THIS side of LVDS cable (cable that connects logic board and LCD) and instead that little 30-pin connector put DVI connector so I can connect VGA/DVI output from my PC to that (new) DVI connector that goes into LCD? I hope you understand what I want to do!
If someone has other idea how to use iMac G5 20inch LCD like PC monitor, please post it.
Message was edited by: TDKZG

I also would like to try and do the same thing.
I have a g5 imac ALS... just had the motherboard recapped and power supply replaced. It works but freezes up intermittently and the fans are just insane...throttling up to max every 30 seconds for a couple minutes fo no reason (temp is ok), the last time I turned it on I realized that it has become pretty much unusable as a reliable family server. We keep the computer on our kitchen counter and the smaller G5 fits well and matches a whole lot better since it's white.
I don't mind cutting or soldering...is it possible to tap into the main cable? It would make a sweet pairing with a new mac mini.

Similar Messages

  • How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

    How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

    Target Display Mode: Frequently Asked Questions (FAQ)
    with a mini display to mini display cable. Attach it to the Thunderbolt port on your MBP and to the mini display port on your iMac.
    How do I enable TDM?
    Make sure both computers are turned on and awake. 
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.

  • Macbook Pro running Windows with Boot Camp, wanting to use iMac as second monitor.

    I am using a Macbook Pro that is running Windows with Boot Camp. I want to connect it to my iMac so that I can use the iMac as a second monitor. 
    If it is not possible, I also have a TV that I could use using an HDMI, however when I tried this my Macbook Pro running Windows 8.1 did not detect it in the Display Settings.
    What are my options? I just want to use my iMac or TV as a second monitor!!
    Any help is appreciated, tMachanks!

    See if your equipment qualifies:
    http://support.apple.com/kb/HT3924
    http://support.apple.com/kb/PH14264
    Ciao.

  • Want to use a TV as a third monitor for Digital Cinema Display....HELP!

    Hey Guys,
    Here's my set up, please tell me where I am going wrong:
    I have 2 22" LCD Monitors that I use for my main work. I added a second card to my MacPro so that I could add an additional monitor. Now I have a DVI to HDMI cable going to my Plasma that I want to use as playback for clients and such. Here's where it gets weird... In After Effects, I can use the Plasma in Digital Cinema Preview for Playback and Previews...works great. Then, when I open up Final Cut I have problems. First, when I go to "Digital Cinema Desktop - Full Screen" it display one frame and stay on that one frame even during playback. So then I changed my Sequence settings thinking my TV couldn't handle that Sequence. No I get a White Screen with no playback at all, not even the one frame. Now the weird part is that if I change the TV to my "Main Screen" in Monitor Prefs, and set Digital Cinema to "Main" it plays back fine. So, if I can playback with it as my main, why can't I playback otherwise? And...if it works in After Effects, why is Final Cut Having Problems with it? It's set to "All Frames" and "Desktop Mirroring". Thoughts? I have seen this set up work before...what am I doing wrong?

    I'm trying to find out much the same thing. I would assume that anyone knows the answers can help both of us.
    I'm purchasing a new Mac Pro desktop. I also use final cut but not after effects.
    I actually have 4 monitors to choose from. 2 Dell 19" - One 27" Apple cinema display and a spector High Def 1080i monitor that has a DVI input.
    I would like to use one of the Dell's as my primary home desk top monitors with folders and all the usual dock and stuff. I would like to use the cinema display as my primary final cut work surface.
    I would like to use the HD monitor to show HD footage and use it as a client monitor. Remember it has a DVI input.
    I've talked with the folks at the Local Apple store and they are not sure if I will get a real HD signal on the HD monitor if I add a second radeon 2700 card to the computer and take on of those DVI outputs and attach it to the HD monitor.
    If thats not possible can I use the apple cinema display as my playback monitor?
    Or do I have to go with a conversion box like a mxo, AJA board, or decklink box.
    The goal is to have two monitors for the program and One monitor in HD for the client monitor,
    Thanks everyone in advance.
    Rich

  • Use iMac 27 mid 11 as monitor for Mac pro?

    I got a imac 27 mid 2011 with a failed video card, and the price of replacing it and the logicboard cost the same as new second hand, so basically a machine in perfect condition is just ready for the junk yard, yea, thats the power of Apple quality.
    Anyway, ive been thinking about getting a Pro 2010-11 model, and first question, when did Pro come with TB interface?
    Second, is it possible to install a TB card so i can plug in my Imac 27 and use it as monitor only?
    Or, in general, is it possible to use my imac 27 as a monitor if the Pro has TB interface?

    the new Mac Pro (late 2013) is the first MacPro with TB

  • Can I use iMac display as an external monitor with a pc?

    I have a Windows laptop with VGA output. Can I connect this laptop's VGA output to mini display port of my 27" iMac?

    This can't be done. VGA is an audio signal and there are no converters to turn it into a digital Display Port (DP) or Mini Display Port (MDP) signal. DVI and HDMI are digital signals (with HDMI having audio and a different physical connector) that can be converted into an MDP signal, but doing so requires an expensive converter or an even more expensive converter and scaler if you want to get full resolution on the target display. The cheaper but perhaps more complicated alternative is to replace your PC video card with a DP/MDP card after which you should be able to drive the 27" iMac display without any converter. Apple didn't include DVI/HDMI input capability in the 27" iMac because that would have required additional circuitry that would have raised the price substantially.

  • I have an ipod touch 4g. I want to use our internet hdtv as a monitor so others can see my screen in 40". Sony guy said that can do it wirelessly through the internet router instead of Hdmi without the need for an apple tv.Is this true and how do I do it?

    As I said above, I want to view my iPod screen on our new 40" Sony Internet full HD TV.
    I know that you can do this via HDMI but a Sony guy said that you should be able to do this wirelessly by going through the router. Is this true and can I do this without the need for the Apple TV?
    We are soon going to get the airport extreme, so will it work with that?

    1. Is it a smart TV?
    2. If so.... Is the TV connected to the Internet?
    3. If it is.... Check if your iPod and your TV share the same IP address (Wi-Fi network)
    4. If they do.... Then you should go to wherever your "Other Media" tab is.
    5. After that.... Search for you iPod. Because it is connected to the same network, it should recognize the device they same way AirPrint does.
    6. If you happen to see this fail, then try this method:
    1. Do you have a Bluetooth-enabled computer/laptop?
    2. If so.... Enable the bluetooth on the computer/laptop as well as your iPod.
    3. After that.... Your iPod should be actively searching and it should find the computer/laptop.
    4. If it did.... Transfer the file onto Windows/Mac (preferably Mac) and find the program to open the file.
    5. After doing so.... Connect your computer/laptop to the TV via HDMI Output Cable.
    6. Now it should work!

  • Disable my MB display while using an extenal LCD?

    Hi, when i have a dual display on my macbook, and i close the display on the macbook, the computer goes to sleep, autimatically,
    yeah, that's normal.
    now, if i click on the BT mighty mouse, the computer wakes up, and since the internal display is closed, my MB goes into a single display mode on the external display.
    so i am wondering if its possible to toggle that single external display without going to sleep, because i beleave it wont be a good thing for my mb.?
    thanks!!

    you can open the lid
    after the external screen comes on and the internal
    screen will stay off.
    exactly, that's the final result i want have, use only my lcd while the internal display is off(lid stays open). but i wish i could do that without going to sleep and then wake it up.
    i thought if i put MB to sleep then wake it to quickly, it will eventually break the HD.

  • Is there a way to use the eMac as an external monitor

    I haven't used my Emac for awhile, but my 17" powerbook is now having a serious display problem and I can't even see the log-in screen. I want to use the Emac as an external monitor or at least have sharing between the two machines. They are both using 10.4.11. What do I need to do to connect them?

    You need to connect them via ethernet or wirelessly, plus a product such as ScreenRecycler. Conventional video in isn't available on most Macs.
    (56636)

  • How do I change the icloud account on my iphone? I want to use the same account for all my apple devices (macbook air and imac and iphone). I can't see where I can amend the iphone account because it is in grey?

    I want to use the same account for all my apple devices (macbook air, imac and iphone). I can't see how I can amend the iphone account because it is in grey? I also can't remember the password for this account so i can't even delete it and start again?
    Help!
    Thanks

    Deleting an iCloud account only deletes it from the Device, not from iCloud.  In iOS 8, the name of this setting changed to "Sign Out" as that is a better reflection of what actually happens.  Your iCloud data remains on the server, available to devices still signed into the account, but the device you sign out of the account on is disconnected from the account, and as a result, the iCloud data from that account is removed from the device.  It will redownload to the device should you sign back into the account.
    The only issue you'll run into when you switch between accounts is with my photo stream photos older than 30 days.  When you delete (or sign out of) and account, your photo stream photos are deleted along with the other data from the account in question.  However, unlike other data which remains on the server and can redownload to your device when you sign back in, my photo stream photos only remain in iCloud for 30 days.  When you sign back in, you will only get back my photo stream photos added in the last 30 days (as older photos are no longer in iCloud to redownload).  Like other account data, any my photo stream photos on your other devices signed into the account are unaffected by this.  If you want to keep older my photo stream photos on your device as you change iCloud accounts, save them to your camera roll before deleting (signing out of) the account.

  • What cable do I need to connect my 20in cinema display to my 2008 imac as I want to use it as adual screen?s, what cable do I need to connect my 20in cinema display to my 2008 imac as I want to use it as adual screen?s

    what cable do I need to connect my 20in cinema display to my 2008 imac as I want to use it as adual screen?s, what cable do I need to connect my 20in cinema display to my 2008 imac as I want to use it as adual screen?s

    Hello, depends on which 20in Cinema, but likely...
    Apple Mini-DVI to DVI Adapter
    http://support.apple.com/kb/HT3235

  • I want to use Time Machine to restore from one IMAC to a different IMAC. How do I do that?

    I use Time Capsule to back up two different IMACs. I want to use the back up from machine A to restore machine B. 
    When I am on machine B I can't see the back up on machine A.  How do I do this?

    Look at Q16.
    The whole 14-17 is good to read so you understand what you are doing.
    http://pondini.org/TM/FAQ.html

  • How do i set up a second display for my iMac desktop?  I want to use both displays at the same time.

    how do i set up a second display for my iMac desktop?  I want to use both displays at the same time.  My iMac is the 24" Late 2006 model.  I recall that there is a cord for plugging in a second monitor, but I want to make sure that i can use both monitors side-by-side at the same time.  thank you.

    If the Display supports DVI, then you will need a > Mini-DVI to DVI Adapter and a DVI cable.
    If the Display only supports VGA, then you wiil need a > Mini DVI to VGA Adapter and a VGA cable.
    Noting that the (digital) DVI is far better than the (analog) VGA connection.
    Also see > Using Dual Displays on Mac OS X: The Experience

  • How can I find my serial number for Adobe Acrobat 11. I got a new iMac and I don't want to use the new version at £18.00 per month. I don't need it. Thank you

    I used to use CS5 and I want to use the Acrobat version on my new iMac.
    How can I find my serial number for Adobe Acrobat 11.  I don't want to use the new version at £18.00 per month. I don't need it. Thank you

    Hi Anthony Aduhene
    Please refer : Find your serial number quickly

  • Hi, I want to use my Capsule just as a back up via wireless. How do I set this up without connecting it with an ethernet cable to either a router or the iMac??

    Hi, I want to use my Capsule just as a back up via wireless. How do I set this up without connecting it with an ethernet cable to either a router or the iMac??

    I misunderstood what Time Capsule is and had hoped for a wireless backup device that didn't have to be connected to the router.
    The TC is a wireless backup device.. it does not need to be connected to the main router..
    The problem is the computer.. not the TC.. the computer has only one wireless card.. if your current internet is by wireless.. then you must choose.. internet or backup.
    But my other suggestion will work.. get a wireless USB stick compatible with Mac OS.. there are plenty and cheap.. since you are in the same room as the TC they will work fine.. plug it in and load the driver.. taint hard.
    You should do the first backup by ethernet though.. wireless is too slow.. once you have that, you will do fine.
    Search ebay for wireless n usb.. Mac compatible..
    http://www.ebay.com/itm/New-EDUP-Mini-Wireless-11N-300M-USB-LAN-Card-WiFi-Adapte r-Nano-Card-Soft-AP-/150864362939?pt=US_USB_Wi_Fi_Adapters_Dongles&hash=item2320 377dbb#ht_3553wt_1165
    As you can see.. they are getting smaller and neater.
    I have no idea if it works .. haven't tried one.. but I have used USB wireless stick on the Mac to overcome this issue.
    You will need to set static IP .. not hard but you need to set specifics if you do buy one post again for the setup.

Maybe you are looking for